Skip to Main content

Researcher identifiers

Social networks


Number of documents


Yancheng ZHANG

Yancheng ZHANG
Chargé de Recherche MINES ParisTech

Dr. Yancheng Zhang obtained his bachelor and master degrees in mechanical engineering from Northeastern University of China in 2005 and 2008.

He received his doctoral degree in mechanical engineering from INSA Lyon (LaMCoS) in September 2011, where he worked with Prof. Daniel Nelias and Prof. Tarek Mabrouki on modeling of cutting operation of Titanium alloys.

After PhD thesis, He joined the computational Mechanics Group of Prof. Timon Rabczuk of Bauhaus University (Weimar, Germany), where he worked on molecular dynamics modeling of polymer based nanocomposites, supported by “Young European MSE (Materials Science and Engineering) Scientists”.

In September 2013, he came back to LaMCoS working on model reduction of welding process with Prof. Alian Combescure.

In October 2015, he started as assistant professor at CEMEF, MINES ParisTech. His researches focus on numerical modeling of additive manufacturing and characterization of anisotropic constitutive model at high temperature.

Since October 2018, he has been a permanent staff of Mines ParisTech. He has 22 publications in peer review journals (17 articles as the first author, 1 cover page) on numerical modelling on machining, additive manufacturing and nanocomposites, model reduction in the Rank A journals such as Comput. Methods. Appl. Mech. Eng., Int. J. Numer. Meth. Eng., Finite Elem. Anal. Des., J. Mater. Process. Technol. and Compos. Struct.

Journal articles24 documents

  • Yancheng Zhang, Charles-André Gandin, Michel Bellet. Finite Element Modeling of Powder Bed Fusion at Part Scale by a Super-Layer Deposition Method Based on Level Set and Mesh Adaptation. Journal of Manufacturing Science and Engineering, American Society of Mechanical Engineers, 2022, 144(5): 051001, ⟨10.1115/1.4052386⟩. ⟨hal-03448797⟩
  • Feng Gao, Bruno Macquaire, Yancheng Zhang, Michel Bellet. A new localized inverse identification method for high temperature testing under resistive heating: Application to the elastic‐viscoplastic behaviour of L‐PBF processed In718. Strain, Wiley-Blackwell, 2022, ⟨10.1111/str.12409⟩. ⟨hal-03588723⟩
  • Xiangman Zhou, Qihua Tian, Yixian Du, Yancheng Zhang, Xingwang Bai, et al.. Investigation of the effect of torch tilt and external magnetic field on arc during overlapping deposition of wire arc additive manufacturing. Rapid Prototyping Journal, Emerald, 2020, 27 (1), pp.24-36. ⟨10.1108/RPJ-03-2020-0047⟩. ⟨hal-03526484⟩
  • Yicha Zhang, Zhiping Wang, Yancheng Zhang, Samuel Gomes, Alain Bernard. Bio-inspired generative design for support structure generation and optimization in Additive Manufacturing (AM). CIRP Annals - Manufacturing Technology, Elsevier, 2020, 69 (1), pp.117-120. ⟨10.1016/j.cirp.2020.04.091⟩. ⟨hal-02942458⟩
  • David Xu, Yancheng Zhang, Franck Pigeonneau. Thermal analysis of the fused filament fabrication printing process: Experimental and numerical investigations. International Journal of Material Forming, Springer Verlag, In press, 2021, 14 (763–776). ⟨hal-02940051⟩
  • Yancheng Zhang, Qiang Chen, Gildas Guillemot, Charles-André Gandin, Michel Bellet. Numerical modelling of fluid and solid thermomechanics in additive manufacturing by powder-bed fusion: Continuum and level set formulation applied to track- and part-scale simulations. Comptes Rendus Mécanique, Elsevier, 2018, 346 (11), pp.1055 - 1071. ⟨10.1016/j.crme.2018.08.008⟩. ⟨hal-01892655⟩
  • Yancheng Zhang, Gildas Guillemot, Marc Bernacki, Michel Bellet. Macroscopic thermal finite element modelling of additive metal manufacturing by selective laser melting process. Computer Methods in Applied Mechanics and Engineering, Elsevier, 2018, 331, pp.514-535. ⟨10.1016/j.cma.2017.12.003⟩. ⟨hal-01662998⟩
  • Yancheng Zhang, Alain Combescure, Anthony Gravouil. Efficient hyper-reduced-order model (HROM) for thermal analysis in the moving frame. International Journal for Numerical Methods in Engineering, Wiley, 2017, 111 (2), pp.176-200. ⟨10.1002/nme.5466⟩. ⟨hal-01442845⟩
  • Yancheng Zhang, Xu Zhang, Cristiano M Chiessi, Stefan Mulitza, Xiao Zhang, et al.. Equatorial Pacific forcing of western Amazonian precipitation during Heinrich Stadial 1. Scientific Reports, Nature Publishing Group, 2016, 6, pp.35866. ⟨10.1038/srep35866⟩. ⟨hal-02180994⟩
  • Tarek Mabrouki, Cédric Courbon, Yancheng Zhang, Joël Rech, Daniel Nélias, et al.. Some insights on the modelling of chip formation and its morphology during metal cutting operations. Comptes Rendus Mécanique, Elsevier, 2016, 344 (4-5), pp.335 - 354. ⟨10.1016/j.crme.2016.02.003⟩. ⟨hal-01442818⟩
  • Yancheng Zhang, Alain Combescure, Anthony Gravouil. Efficient hyper reduced-order model (HROM) for parametric studies of the 3D thermo-elasto-plastic calculation. Finite Elements in Analysis and Design, Elsevier, 2015, ⟨10.1016/j.finel.2015.04.009⟩. ⟨hal-01442852⟩
  • Yancheng Zhang, J.C. Outeiro, Tarek Mabrouki. On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4 V Using Three Types of Numerical Models of Orthogonal Cutting. Procedia CIRP, ELSEVIER, 2015, ⟨10.1016/j.procir.2015.03.052⟩. ⟨hal-01442867⟩
  • Yancheng Zhang, Cristiano M Chiessi, Stefan Mulitza, Matthias Zabel, Ricardo I F Trindade, et al.. Origin of increased terrigenous supply to the NE South American continental margin during Heinrich Stadial 1 and the Younger Dryas. Earth and Planetary Science Letters, Elsevier, 2015, 432, pp.493-500. ⟨10.1016/j.epsl.2015.09.054⟩. ⟨hal-02180992⟩
  • Yancheng Zhang, Xiaoying Zhuang, Jacob Muthu, Tarek Mabrouki, Michael Fontaine, et al.. Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation. Composites Part B: Engineering, Elsevier, 2014, 63, pp.27 - 33. ⟨10.1016/j.compositesb.2014.03.009⟩. ⟨hal-01442873⟩
  • Yancheng Zhang, D. Umbrello, Tarek Mabrouki, S. Rizzuti, Daniel Nelias, et al.. On different fe-based models to simulate cutting operation of titanium alloy (ti-6al-4v). Mechanika, Kaunas University of Technology, 2013, 19, pp.349-357. ⟨hal-00938377⟩
  • Yancheng Zhang, Junhua Zhao, Yue Jia, Tarek Mabrouki, Yadong Gong, et al.. An analytical solution on interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase. Composite Structures, Elsevier, 2013, 104, pp.261-269. ⟨10.1016/j.compstruct.2013.04.029⟩. ⟨hal-00938430⟩
  • Yancheng Zhang, Ning Wei, Junhua Zhao, Yadong Gong, Timon Rabczuk. Quasi-analytical solution for the stable system of the multi-layer folded graphene wrinkles. Journal of Applied Physics, American Institute of Physics, 2013, ⟨10.1063/1.4817768⟩. ⟨hal-01442881⟩
  • N Vu-Bac, T Lahmer, Yancheng Zhang, Xiaoying Zhuang, Timon Rabczuk. Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs). Composites Part B: Engineering, Elsevier, 2013, ⟨10.1016/j.compositesb.2013.11.014⟩. ⟨hal-01442878⟩
  • Yancheng Zhang, Junhua Zhao, Ning Wei, Jinwei Jiang, Yadong Gong, et al.. Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer. Composites Part B: Engineering, Elsevier, 2012, ⟨10.1016/j.compositesb.2012.09.079⟩. ⟨hal-01442893⟩
  • Yancheng Zhang, Tarek Mabrouki, Daniel Nelias, Cedric Courbon, Joel Rech, et al.. Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements. Journal of Materials Processing Technology, Elsevier, 2012, 212, pp.936-953. ⟨10.1016/j.jmatprotec.2011.12.001⟩. ⟨hal-00938429⟩
  • Yancheng Zhang, Tarek Mabrouki, Daniel Nelias, Yadong Gong. Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach. Finite Elements in Analysis and Design, Elsevier, 2011, 47, pp.850-863. ⟨10.1016/j.finel.2011.02.016⟩. ⟨hal-00629449⟩
  • Muhammad Asad, Tarek Mabrouki, François Girardin, Yancheng Zhang, Jean Francois Rigal. Towards a physical comprehension of material strengthening factors during macro to micro-scale. Mechanika, Kaunas University of Technology, 2011, 17 (1), pp.97-104. ⟨hal-00581081⟩
  • Yancheng Zhang, Domenico Umbrello, Tarek Mabrouki, Stefania Rizzuti, Daniel Nelias, et al.. On Methodologies inside Two Different Commercial Codes to Simulate the Cutting Operation. Advanced Materials Research, Trans Tech Publications, 2011, 223, pp.162-171. ⟨10.4028/⟩. ⟨hal-00629454⟩
  • Yancheng Zhang, Tarek Mabrouki, Daniel Nelias, Y. Gong. FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface. International Journal of Material Forming, Springer Verlag, 2011, 4, pp.11-23. ⟨10.1007/s12289-010-0986-7⟩. ⟨hal-00581097⟩

Conference papers7 documents

  • Yancheng Zhang, Gildas Guillemot, Michel Bellet, Charles-André Gandin. Thermomechanical simulation of powder bed fusion at part scale by super-layer deposition technique based on level-set method. WCCM-ECCOMAS CONGRESS, Jan 2021, Paris, France. ⟨hal-03523983⟩
  • Arnaud Pignolet, Christelle Combeaud, Francis Fournier, Gilbert Fiorucci, Christophe Pradille, et al.. Experimental Approach for Metals Mechanical Behavior Characterization at High Temperature: Development of a Complex Tensile Test Machine. ICEM18, 18th Int. Conf. on Experimental Mechanics, Jul 2018, Bruxelles, Belgium. pp.355, ⟨10.3390/icem18-05207⟩. ⟨hal-01963291⟩
  • Yancheng Zhang, Gildas Guillemot, Charles-André Gandin, Michel Bellet. Macroscopic Finite element thermal modelling of selective laser melting for IN718 real part geometries. Additive Manufacturing for Products and Applications (AMPA), Sep 2017, ETH Zürich, Switzerland. ⟨hal-01683519⟩
  • Yancheng Zhang, Michel Bellet, Gildas Guillemot, Charles-André Gandin. Macroscopic finite element thermal modelling of laser beam melting of Inconel 718 . 1st Int. Congress on Welding and Additive Manufacturing and associated non destructive testing (ICWAM), May 2017, metz, France. ⟨hal-01683524⟩
  • Yancheng Zhang, Qiang Chen, Gildas Guillemot, Michel Bellet, Charles-André Gandin. Macro- and meso-scale finite element modelling of the laser beam melting process. 2nd Int. Conf. on Metallic Materials and Processes (MMP2017), Oct 2017, Deauville, France. ⟨hal-01683529⟩
  • Yancheng Zhang, Alain Combescure, Anthony Gravouil. Modèle thermique hyper-réduit avec source mobile : formulation dans le repère mobile. CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-03444994⟩

Poster communications1 document

  • Qiang Chen, Yancheng Zhang, Michel Bellet, Charles-André Gandin, Gildas Guillemot. Simulation Numérique du Procédé SLM Développement de modèles multi-physiques. Rencontre « La Fabrication Additive pour l’Industrie », Projet ACLAME - Action Concertée des LAboratoires Matériaux des Ecoles des Mines sur les procédés de fabrication additive, Sep 2016, Douai, France. 2016. ⟨hal-01449694⟩