Skip to Main content

Keywords

Number of documents

107

Enseignant - chercheur Mécanique des fluides et CFD - Chef du Département Mécanique, Mécanique des fluides et Matériaux IPSA


PARCOURS PROFESSIONNEL

Depuis Septembre 2019 : Chef du Département Mécanique, Mécanique des fluides et Matériaux à l’Institut Polytechnique de Sciences Avancées, Ivry sur Seine, (IPSA)

Septembre 2016 : Enseignant chercheur département véhicule, Aérodynamique, mécanique des fluides et calcul CFD à l’ Institut Polytechnique de Sciences Avancées, Ivry sur Seine, (IPSA)

Septembre 2015-2016: ATER à L’ENSIAME (Université de Valenciennes) : niveau première année ENSIAME cycle d’ingénieurs.

Septembre 2014/Aout 2015: ATER à L’ENSAM (Arts et Métiers ParisTech)au centre d’Angers: niveau 2 ème année Génie industriel et productique (GIP)

Septembre 2013/Aout 2014 : ATER à L’IUT de Saint-Nazaire (Université de Nantes) niveau 1ère année DUT technologique et scientifique, Génie civil

Janvier 2013/ Aout 2013 : Contrat de Professeur Agrégé (PRAG) à L’ENSIAME (Université de Valenciennes) : niveaux première année ENSIAME cycle d’ingénieurs.

Encadrement :

Codirecteur de thèse de doctorat :  Novembre 2017-Novembre 2020  à l’université de Valenciennes laboratoire LAMIH, intitulée : « Closed-loop active flow control applied to bluff body geometries »

Doctorant Baptiste Plumejeau

Collaboration avec le Laboratoire LAMIH – Université de Valencienne – : Encadrement stage de de fin d’étude et des stages techniciens

Master Qualité Hygiène Sécurité et Environnement (QHSE) à l’ENSIAME

FORMATION

2011/06 Juin 2014 : Thèse de Doctorat en Génie des procédés spécialité "Mécanique des Fluides et Transferts" en Cotutelle entre l’Université de Nantes et l’Université de Monastir (Tunisie) sous la direction du Prof. Fethi ALOUI (Prof. à l'UVHC) et soutenue devant un jury d’examen le 06Juin 2014 à l’école des Mines de Nantes.

2008/2010 : Master Recherche en Génie Energétique, Laboratoire d’Etudes des Systèmes Thermiques et Energétiques (LESTE) à l’École Nationale d’Ingénieurs de Monastir (ENIM) de l'Université de Monastir, Tunisie.

2003-2006 : Cycle d'Ingénieurs à l'Ecole Nationale d'Ingénieurs de Monastir (ENIM) : spécialité Génie énergétique (Option : Systèmes Thermiques).

Projet de fin d’études : « Détermination des caractéristiques thermo-physiques d’un milieu poreux à l’aide de la méthode du fil chaud».

2001-2003 : Cycle préparatoire à l'Institut Préparatoire des Etudes d'Ingénieurs de Tunis (IPEIT-Montfleury, Tunis, Tunisie) : Spécialité Physique-Chimie.

THESE ET MEMOIRE

✓ Thèse : A l’Université de Nantes, Laboratoire GEPEA, département DSEE à l’école des mines de Nantes. Financement sur Projet ANR (CPARTOUT).

Sujet: « Investigations expérimentales et modélisations numériques par la méthode de Lattice Boltzmann (LBM) pour l’étude des transferts dans les écoulements tourbillonnaires».

« Le sujet de thèse à la fois numérique et expérimental porte sur l’étude des instabilités générées au niveau de deux types d’écoulement typiquement tourbillonnaires : le sillage d’un obstacle et l’écoulement de Couette- Taylor. La partie expérimentale est réalisée au moyen de deux techniques expérimentales différentes. La technique PIV pour la caractérisation de la dynamique des instabilités développées et L’électrochimie pour l’étude de l’interaction Vortex –paroi ».

✓ Master Recherche : A l’Ecole Nationale d’Ingénieurs de Monastir (Tunisie)

Sujet : « Étude des écoulements autour d’un obstacle»

COMPETENCES

Outils de simulation: Comsol –Star CCM+ – Ansys - OpenFoam

Langages de programmation :Fortran – Matlab - C++ - Pascal -

CAO : Solid Works- AutoCAD - Catia - Mensura Genius (Conception infrastructures)…

Outils graphiques :Matlab – Tecplot – Mathematica- Origin – Paraview - Grapher

Outils expérimentaux :PIV – LDV - Fil chaud - Interface Insight 3G et 4G - Flow Manger software.

LANGUES

Anglais : Courant TOEIC

Français : Courant

Arabe: Langue maternelle

Allemand : débutant

Italien : Scolaire


Journal articles47 documents

  • Hannes Deponte, Donia Djendar, Tim Eckert, Fethi Aloui, Wolfgang Augustin, et al.. Fluid dynamic investigation of particle-laden suspensions on dimpled surfaces under fouling conditions. International Journal of Multiphase Flow, Elsevier, 2021, 140, pp.103651. ⟨10.1016/j.ijmultiphaseflow.2021.103651⟩. ⟨hal-03445981⟩
  • S Thiruvenkatachari, C. G. Saravanan, Edwin Geo Varuvel, M Vikneswaran, R Udayakumar, et al.. Experimental investigations on the production and testing of azolla methyl esters from Azolla microphylla in a compression ignition engine. Fuel, Elsevier, 2021, 287, pp.119448. ⟨10.1016/j.fuel.2020.119448⟩. ⟨hal-03447193⟩
  • Ahmad Al Saabi, Heni Dallagi, Fethi Aloui, Christine Faille, Gaétan Rauwel, et al.. Removal of Bacillus spores from stainless steel pipes by flow foam: Effect of the foam quality and velocity. Journal of Food Engineering, Elsevier, 2021, Journal of Food Engineering, 289, pp.110273. ⟨10.1016/j.jfoodeng.2020.110273⟩. ⟨hal-03052084⟩
  • Edwin Geo Varuvel, Fethi Aloui, Mohand Tazerout. A comparative analysis of different methods to improve the performance of rubber seed oil fuelled compression ignition engine. Fuel, Elsevier, 2020, 280, pp.118644. ⟨10.1016/j.fuel.2020.118644⟩. ⟨hal-03448991⟩
  • Edwin Geo Varuvel, C. Prabhu, Shanmugam Thiyagarajan, T. Maiyalagan, Fethi Aloui. Comparative analysis of various techniques to improve the performance of novel wheat germ oil – an experimental study. International Journal of Hydrogen Energy, Elsevier, 2020, 45 (9), pp.5745-5756. ⟨10.1016/j.ijhydene.2019.05.198⟩. ⟨hal-03440792⟩
  • Hiba Rejeb, Emna Berrich, Mohamed Hachemi Chahbani, Fethi Aloui. Energetic valourisation of waste tyres by pyrolysis: catalyst effect on tyres derived oil and gases. International Journal of Global Warming, Inderscience Publishers, 2020, 20 (3), pp.187. ⟨10.1504/IJGW.2020.10028203⟩. ⟨hal-02634737⟩
  • Edwin Geo Varuvel, D. Godwin, Shanmugam Thiyagarajan, C. G. Saravanan, Fethi Aloui. Effect of higher and lower order alcohol blending with gasoline on performance, emission and combustion characteristics of SI engine. Fuel, Elsevier, 2019, 256, pp.115806. ⟨10.1016/j.fuel.2019.115806⟩. ⟨hal-03442392⟩
  • Fethi Aloui, Lamia Gaied, Wafik Abassi, Marc Lippert, Maxence Bigerelle. Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication. Mechanics & Industry, EDP Sciences, 2019, 20 (6), pp.601. ⟨10.1051/meca/2019035⟩. ⟨hal-03341975⟩
  • Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Technological challenges and optimization efforts of the Stirling machine: A review. Energy Conversion and Management, Elsevier, 2018, 171, pp.1365-1387. ⟨10.1016/j.enconman.2018.06.042⟩. ⟨hal-03449932⟩
  • Edwin Geo Varuvel, Fethi Aloui. Predicting the different engine parameters of a rubber seed oil-ethanol dual fuel engine using artificial neural networks. International Journal of Global Warming, Inderscience Publishers, 2018, 16 (4), pp.485-506. ⟨10.1504/IJGW.2018.095995⟩. ⟨hal-03449858⟩
  • Edwin Geo Varuvel, Ankit Sonthalia, Thiyagarajan Subramanian, Fethi Aloui. NOx-smoke trade-off characteristics of minor vegetable oil blends synergy with oxygenate in a commercial CI engine. Environmental Science and Pollution Research, Springer Verlag, 2018, 25 (35), pp.35715-35724. ⟨10.1007/s11356-018-3484-y⟩. ⟨hal-03449872⟩
  • V. Edwin Geo, Ankit Sonthalia, Fethi Aloui, J. Femilda Josephin. Study of engine performance, emission and combustion characteristics fueled with diesel-like fuel produced from waste engine oil and waste plastics. FRONTIERS OF ENVIRONMENTAL SCIENCE and ENGINEERING, 2018, 12 (4), ⟨10.1007/s11783-018-1063-6⟩. ⟨hal-03450001⟩
  • Denis Cornu, Marc Lippert, Franck Kerhervé, Fethi Aloui, Laurent Keirsbulck. Hydrodynamic oscillations inside deep cavities with wall offset. European Journal of Mechanics - B/Fluids, Elsevier, 2018, 72, pp.403-409. ⟨10.1016/j.euromechflu.2018.04.013⟩. ⟨hal-03449834⟩
  • Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Optimization of an air-filled Beta type Stirling refrigerator. International Journal of Refrigeration, Elsevier, 2017, 76, pp.296-312. ⟨10.1016/j.ijrefrig.2017.02.019⟩. ⟨hal-03451908⟩
  • Baptiste Zacchello, Eni Oko, Meihong Wang, Fethi Aloui. Process simulation and analysis of carbon capture with an aqueous mixture of ionic liquid and monoethanolamine solvent. International Journal of Coal Science & Technology, 2017, 4 (1), pp.25-32. ⟨10.1007/s40789-016-0150-1⟩. ⟨hal-03451934⟩
  • Mahmoud Charmiyan, Ahmed-Reza Azimian, Ebrahim Shirani, Fethi Aloui. Investigation of turbulent slot impinging jet using laser doppler anemometry method–Experimental research and error analysis. Modares Mechanical Engineering, 2017, 17 (4), pp. 92-100. ⟨hal-03456393⟩
  • Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Improvement of a non energy-consuming system: A gamma Stirling engine. Environmental Engineering and Management Journal, "Gheorghe Asachi" Technical University of Iaşi, 2016, 15 (1), pp.133-141. ⟨10.30638/eemj.2016.015⟩. ⟨hal-03448372⟩
  • Rogelio Chovet, Fethi Aloui. Liquid Film Thickness: Study and Influence over Aqueous Foam Flow. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9, pp.39-48. ⟨hal-03443040⟩
  • Mostafa Monfared, Ebrahim Shirani, Mohammad Reza Salimpour, Fethi Aloui. Numerical and experimental study on the flow history effects of axial flow on the Couette–Taylor flow. Acta Mechanica, Springer Verlag, 2016, 227 (7), pp.1999-2010. ⟨10.1007/s00707-016-1592-7⟩. ⟨hal-03446002⟩
  • Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui. Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (1), pp.11-17. ⟨hal-03448221⟩
  • Fawzi Fadla, Rogelio Chovet, Denis Cornu, Marc Lippert, Fethi Aloui, et al.. Spatial Resolution Correction for Electrochemical Wall-shear Stress Measurements using Rectangular Sensors. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (3), pp.1309-1319. ⟨10.18869/acadpub.jafm.68.228.23945⟩. ⟨hal-03448317⟩
  • Nabil Tounsi, Rafika Mestiri, Laurent Keirsbulck, Hamid Oualli, Samir Hanchi, et al.. Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (2), pp.827-838. ⟨10.18869/acadpub.jafm.68.225.24488⟩. ⟨hal-03448166⟩
  • Mohammad Hossein Ahmadi, Mohammad Ali Ahmadi, Milad Ashouri, Astarei Razie, Roghayeh Ghasempour, et al.. Prediction of performance of Stirling engine using least squares support machine technique. Mechanics & Industry, EDP Sciences, 2016, 17 (5), pp.506. ⟨10.1051/meca/2015098⟩. ⟨hal-03448100⟩
  • Mostafa Monfared, Ebrahim Shirani, Fethi Aloui, Mohammad Reza Salimpour. Numerical and Experimental Study on the Effects of Taylor Number on the Wavelength of the Couette-Taylor Flow. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (1), pp.49-58. ⟨hal-03448182⟩
  • Wafik Abassi, Fethi Aloui, Sassi Bennasrallah, Jack Legrand. Use of the PIV and Electrochemical Techniques to Experimentally Characterize the Couette-TaylorPoiseuille Flow Instabilities. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (SI1), ⟨10.36884/jafm.9.si1.25910⟩. ⟨hal-03342128⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand. Use of the PIV and Electrochemical Techniques to Experimentally Characterize the Couette-Taylor- Poiseuille Flow Instabilities. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (1), pp.59 - 68. ⟨hal-01527258⟩
  • Edwin Geo Varuvel, Nadia Mrad, Fethi Aloui, Mohand Tazerout. Experimental analysis of fuel from fish processing industry waste in a diesel engine. Clean Technologies and Environmental Policy, Springer Verlag, 2016, 19 (4), pp.1099-1108. ⟨10.1007/s10098-016-1303-z⟩. ⟨hal-01525727⟩
  • Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah, Ibrahim Dincer. Exergy assessment of heat transfer inside a Beta type Stirling engine. International Journal of Exergy, Inderscience, 2016, 20 (2), pp.186-202. ⟨hal-03447147⟩
  • Emma Berrich Betouche, Fethi Aloui, Jack Legrand. Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis using PIV Technique and POD for Post-Processing. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (Special issue 1), pp.155-164. ⟨hal-01349730⟩
  • Emma Berrich Betouche, Ali Fellah, Ammar Ben Brahim, Fethi Aloui, Michel Feidt. Hierarchical Decomposition Thermodynamic Approach for the Study of Solar Absorption Refrigerator Performance. Entropy, MDPI, 2016, 18 (3), 9p. ⟨10.3390/e18030082⟩. ⟨hal-01347760⟩
  • Emma Berrich Betouche, Ali Fellah, Ammar Ben Brahim, Fethi Aloui, Michel Feidt. Thermodynamic Analysis of the Irreversibilities in Solar Absorption Refrigerators. Entropy, MDPI, 2016, 18 (4), pp.107. ⟨10.3390/e18040107⟩. ⟨hal-01347759⟩
  • Emna Berrich, Fethi Aloui, D Pierrat, L Gros, Anthony Couzinet, et al.. Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis using PIV Technique and POD for Post-Processing. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (1), pp.19-29. ⟨hal-01349723⟩
  • Emna Berrich, Fethi Aloui, Jack Legrand. Experimental Investigations on Oscillatory Couette Taylor Flow Wall Shear Stress Behavior using Electrochemical Technique: Low Modulation Effect. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2016, 9 (1), pp.147-154. ⟨10.36884/jafm.9.SI1.26163⟩. ⟨hal-02545268⟩
  • Denis Cornu, Laurent Keirsbulck, Franck Kerhervé, Fethi Aloui, Marc Lippert. On the vortex dynamics of shear-driven deep cavity flows with asymmetrical walls. Canadian Journal of Physics, NRC Research Press, 2016, 94 (12), pp.1344-1352. ⟨10.1139/cjp-2016-0305⟩. ⟨hal-03462028⟩
  • Ramla Gheith, Houda Hachem, Fethi Aloui, Sassi Ben Nasrallah. Experimental and theoretical investigation of Stirling engine heater: Parametrical optimization. Energy Conversion and Management, Elsevier, 2015, 105, pp.285-293. ⟨10.1016/j.enconman.2015.07.063⟩. ⟨hal-03448409⟩
  • Houda Hachem, Marie Creyx, Ramla Gheith, Eric Delacourt, Céline Morin, et al.. Comparison Based on Exergetic Analyses of Two Hot Air Engines: A Gamma Type Stirling Engine and an Open Joule Cycle Ericsson Engine. Entropy, MDPI, 2015, 17 (11), pp.7331-7348. ⟨10.3390/e17117331⟩. ⟨hal-03448497⟩
  • Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Numerical characterization of a γ-Stirling engine considering losses and interaction between functioning parameters. Energy Conversion and Management, Elsevier, 2015, 96, pp.532-543. ⟨10.1016/j.enconman.2015.02.065⟩. ⟨hal-03448568⟩
  • Wafik Abassi, Fethi Aloui, Laurent Keirsbulck, Ben Nasrallah Sassi. Experimental and Numerical Investigations Using Lattice Boltzmann Method to Study Shedding Vortices in an Unsteady Confined Flow Around an Obstacle. Journal of Fluids Engineering, American Society of Mechanical Engineers, 2015, 137 (10), ⟨10.1115/1.4030487⟩. ⟨hal-03342074⟩
  • Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Determination of adequate regenerator for a Gamma-type Stirling engine. Applied Energy, Elsevier, 2015, 139, pp.272-280. ⟨10.1016/j.apenergy.2014.11.011⟩. ⟨hal-03450995⟩
  • Maher Ayed, Fethi Aloui, Azeddine Kourta, Sassi Ben Nasrallah. Development of a Synthetic Jet Actuator for the Control of Separated Flows. International Journal of Science and Research, Rajesh K. Deshmukh, 2014, 3 (7), pp.974. ⟨hal-01186729⟩
  • Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, et al.. Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking. International Journal of Energy Research, Wiley, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩
  • Nadia Mrad, Edwin Geo Varuvel, Mohand Tazerout, Fethi Aloui. Effects of biofuel from fish oil industrial residue - Diesel blends in diesel engine. Energy, Elsevier, 2012, 44 (1), pp.955-963. ⟨10.1016/j.energy.2012.04.056⟩. ⟨hal-00935914⟩
  • Edwin Geo Varuvel, Nadia Mrad, Fethi Aloui, Mohand Tazerout. Experimental analysis of biofuel as an alternative fuel for diesel engines. Applied Energy, Elsevier, 2012, 94, pp.224-231. ⟨10.1016/j.apenergy.2012.01.067⟩. ⟨hal-00935916⟩
  • Ramla Gheith, Fethi Aloui, Mohand Tazerout, Sassi Ben Nasrallah. Experimental investigations of a gamma Stirling engine. International Journal of Energy Research, Wiley, 2012, 36 (12), pp.1175-1182. ⟨10.1002/er.1872⟩. ⟨hal-00935911⟩
  • Edwin Geo Varuvel, Nadia Mrad, Mohand Tazerout, Fethi Aloui. Assessment of liquid fuel (bio-oil) production from waste fish fat and utilization in diesel engine. Applied Energy, Elsevier, 2012, 100, pp.249-257. ⟨10.1016/j.apenergy.2012.05.035⟩. ⟨hal-00935910⟩
  • Karine Loubiere, Jérémy Pruvost, Fethi Aloui, Jack Legrand. Investigations in an external-loop airlift photobioreactor with annular light chambers and swirling flow. Chemical Engineering Research and Design, Elsevier, 2011, 89 (2), pp.164-171. ⟨10.1016/j.cherd.2010.06.001⟩. ⟨hal-02534159⟩
  • Amine Koched, Michel Pavageau, Fethi Aloui. Vortex structure in the wall region of an impinging plane jet. Journal of Applied Fluid Mechanics, Isfahan Isfahan University of Technology, 2011, 4 (2 (special issue)), pp.61-69. ⟨hal-01851603⟩

Conference papers40 documents

  • Heni Dallagi, Ahmad Al Saabi, Christine Faille, Thierry Benezech, Wolfgang Augustin, et al.. CFD Simulations of the Rheological Behavior of Aqueous Foam Flow Through a Half-Sudden Expansion. ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Jul 2019, San Francisco, CA, United States. ⟨10.1115/ajkfluids2019-4650⟩. ⟨hal-03125278⟩
  • Ahmad Al Saabi, Heni Dallagi, Christine Faille, Fethi Aloui, Thierry Benezech. Cleaning in Place by flowing foams: a sustainable way to remove Bacillus spores from stainless steel surface. Journée des doctorants JDD2019, Jan 2019, Villeneuve d'Ascq, France. ⟨hal-03125609⟩
  • Heni Dallagi, Christine Faille, Fethi Aloui, Thierry Benezech. Innovative and eco-efficient strategies for designing and cleaning industrial equipment: Applications for the vegetables and potatoes processing industry. Journée des doctorants JDD2019, Jan 2019, Villeneuve d'Ascq, France. ⟨hal-03127656⟩
  • Heni Dallagi, Ahmad Al Saabi, Piyush-Kumar Jha, Laurent Bouvier, Laurent Wauquier, et al.. Caractérisation Expérimentale du Comportement Rhéologique de mousse en écoulement : Application du Nettoyage En Place. 6ème Edition Wallonie/Nord de France de la Journée des Jeunes Chercheurs Vers la conception de procédés éco-innovants JJC2019, Nov 2019, Mons, Belgique. ⟨hal-03125190⟩
  • Heni Dallagi, Ramla Gheith, Ahmad Al Saabi, Christine Faille, Wolfgang Augustin, et al.. CFD characterization of a wet foam flow rheological behavior. ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, Jul 2018, Montréal, Canada. ⟨10.1115/FEDSM2018-83338⟩. ⟨hal-02008733⟩
  • Lamia Gaied, Emna Berrich, Maxence Bigerelle, Fethi Aloui. Experimental study of the wall surfaces 'roughness influence on the hydrodynamics' instabilities in a Couette-Taylor flow. 23èmeCongrès Français de Mécanique, Aug 2018, Lille, France. ⟨hal-02407499⟩
  • Ahmad Al Saabi, Fethi Aloui, Christine Faille, Laurent Wauquier, Christelle Lemy, et al.. Flowing foam for the removal of B. subtilis and B. cereus spores from stainless steel surfaces. Fouling and cleaning in food processing, Apr 2018, Lund, Sweden. ⟨hal-03124331⟩
  • Houda Hachem, Ramla Gheith, Sassi Ben Nasrallah, Fethi Aloui. Entropy Generation for Oscillatory Flow Inside Thermal-Lag Type Stirling Engine: Numerical Analysis. ASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, Hawaii, United States. ⟨10.1115/FEDSM2017-69010⟩. ⟨hal-03436504⟩
  • Mahmoud Charmiyan, Ahmed-Reza Azimian, Ebrahim Shirani, Fethi Aloui. Capability Assessment of Five Different RANS-Based Turbulence Models to Simulate the Various Regions of Slot Turbulent Impingement Jet Flow. ASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, United States. ⟨10.1115/FEDSM2017-69203⟩. ⟨hal-03436532⟩
  • Denis Cornu, Laurent Keirsbulck, Camila Chovet, Marc Lippert, Franck Kerhervé, et al.. Caractérisation des écoulements de cavité asymétriques. 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03442157⟩
  • Ramla Gheith, Mohamed Frikha, Houda Hachem, Fethi Aloui, Sassi Ben Nasrallah. Simulation CFD des échangeurs de chaleur dans un moteur Stirling à Double effet. Journées Internationales de la Thermique 2017, Oct 2017, Monastir, Tunisie. ⟨hal-03439563⟩
  • Emna Berrich, Asma Dhahak, Abdelaziz Touati, Fethi Aloui. Fuel production from thermoplastic wastes pyrolysis. ASME 2017, Jul 2017, Waikoloa, Hawaii, United States. ⟨hal-03436515⟩
  • Mostafa Monfared, Lamia Gaied, Emna Berrich, Ebrahim Shirani, Maxence Bigerelle, et al.. Experimental Study on the Effects of Surface Roughness on the Behaviors of Hydrodynamic Instabilities of Couette-Taylor Flow. ASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, United States. ⟨10.1115/FEDSM2017-69252⟩. ⟨hal-02407401⟩
  • Emma Berrich Betouche, Asma Dhahak, Abdelaziz Touati, Fethi Aloui. Fuel Production From Plastic Wastes Pyrolysis. ASME 2017 Fluids Engineering Division Summer Meeting, Jul 2017, Waikoloa, United States. ⟨10.1115/FEDSM2017-69086⟩. ⟨hal-02407249⟩
  • Denis Cornu, Laurent Keirsbulck, Marc Lippert, Rogelio Chovet, Anthony Graziani, et al.. Dynamical behavior over an asymmetrical deep cavity at high Reynolds numbers. The third International Conference on Railway Technology: Research, Development and Maintenance, Apr 2016, Cagliari, Italy. ⟨hal-03432913⟩
  • Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Experimental Study of the Operation Conditions of Stability on a Gamma Stirling Engine. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7912⟩. ⟨hal-03439166⟩
  • Insaf Mehrez, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Numerical Analysis of Flow and Heat Transfer at a Backward-Facing Step With an Obstacle Based on Lattice Boltzmann Method. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7915⟩. ⟨hal-03439135⟩
  • Ramla Gheith, Houda Hachem, Nessrine Zahi, Fethi Aloui, Sassi Ben Nasrallah. Convective Flow and Heat Transfer Inside a Beta Type Stirling Engine Based on Control Volume Finite Element Method. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7911⟩. ⟨hal-03439152⟩
  • Emna Berrich, Fethi Aloui, Jack Legrand. Experimental Investigations of Couette-Taylor-Poiseuille Flows Using the Electro-Diffusional Technique. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2016, Washington, United States. ⟨10.1115/FEDSM2016-7918⟩. ⟨hal-03439199⟩
  • Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Investigation of Regenerator Matrix Through Figure of Merit Analysis. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Jul 2015, Seoul, South Korea. ⟨10.1115/AJKFluids2015-22087⟩. ⟨hal-03433929⟩
  • Houda Hachem, Ramla Gheith, Sassi Ben Nasrallah, Fethi Aloui. Impact of Operating Parameters on Beta Type Regenerative Stirling Machine Performances. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Jul 2015, Seoul, South Korea. ⟨10.1115/AJKFluids2015-22088⟩. ⟨hal-03433921⟩
  • Denis Cornu, Laurent Keirsbulck, Camila Chovet, Franck Kerhervé, Fethi Aloui. On the vortex dynamic of shear-driven deep cavity with asymmetrical walls. 4th International conference on turbulence and interaction, Jun 2015, Corse, France. ⟨hal-03432977⟩
  • Rogelio Chovet, Fethi Aloui, Laurent Keirsbulck. Wall Shear Stress Generated by Aqueous Flowing Foam. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Jul 2015, Seoul, South Korea. ⟨10.1115/AJKFluids2015-14039⟩. ⟨hal-03433925⟩
  • Emna Berrich, Fethi Aloui, Jack Legrand. PIV investigation of Couette-Taylor flows with axial flows. ASME-JSMEKSME Joint Fluids Engineering Conference 2015, AJK2015-FED, Jul 2015, Séoul, South Korea. ⟨10.1115/AJKFluids2015-14086⟩. ⟨hal-02567739⟩
  • Emna Berrich, Fethi Aloui, Daniel Pierrat, L. Gros, Anthony Couzinet, et al.. Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis Using PIV Technique and POD for Post-Processing. Seventh International Exergy, Energy and Environment Symposium (IEEES7), Apr 2015, Valenciennes, France. ⟨hal-02567734⟩
  • Fawzi Fadla, Laurent Keirsbulck, Fethi Aloui, Jean-Philippe Laval. Experimental Characterization of the Separate Flow Induced by a Wall-Mounted Bump. ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21136⟩. ⟨hal-03436221⟩
  • Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Evaluation of the Gamma Stirling Engine Heat Transfers in its Heat Exchangers. ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21189⟩. ⟨hal-03434487⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Laurent Keirsbulck, Jack Legrand. Flow Behaviour Around Square and Circular Obstacles in 2D and 3D Configurations Using Lattice Boltzmann Method. ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21211⟩. ⟨hal-03342191⟩
  • Rogelio Chovet, Fethi Aloui, Laurent Keirsbulck. Gas-Liquid Foam Through Straight Ducts and Singularities: CFD Simulations and Experiments. ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Aug 2014, Chicago, United States. ⟨10.1115/FEDSM2014-21190⟩. ⟨hal-03474238⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand, Larbi Labraga. Use of the POD and the Coherent Structure Detection Criteria to Study the Flow Dynamics Downstream a Confined Square Obstacle. ASME 2013 Fluids Engineering Division Summer Meeting, 2014, Incline Village, United States. ⟨10.1115/FEDSM2013-16309⟩. ⟨hal-01206899⟩
  • Emna Berrich, Fethi Aloui, Jack Legrand. Experimental Study on Oscillatory Couette-Taylor Flows Behaviour. ASME 2013 Fluids Engineering Division Summer Meeting, Jul 2014, Incline Village, United States. ⟨10.1115/FEDSM2013-16308⟩. ⟨hal-01206891⟩
  • Nadia Mrad, Fethi Aloui, Mohand Tazerout. Upgrade of Corrosiveness Nature of Fish Waste Bio-Oil Using a Hybrid Catalyst (MgO/Na2CO3) Optimization Process. ASME 2013 Fluids Engineering Division Summer Meeting, 2014, Incline Village, United States. ⟨10.1115/FEDSM2013-16391⟩. ⟨hal-01464702⟩
  • Fethi Aloui, Mouldi Kardous, Rym Chaker, Sassi Ben Nasrallah. Étude par PIV du sillage induit par un disque poreux. CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. ⟨hal-03440606⟩
  • Maher Ayed, Fethi Aloui, Azeddine Kourta, Sassi Ben Nasrallah. Développement d'un actionneur de type jet synthétique pour le contrôle des écoulements décollés. CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. ⟨hal-03439707⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand, Larbi Labraga. Use of the POD and the Coherent Structure Detection Criteria to Study the Flow Dynamics Downstream a Confined Square Obstacle. ASME 2013 Fluids Engineering Division Summer Meeting, Jul 2013, Incline Village, France. ⟨10.1115/FEDSM2013-16309⟩. ⟨hal-03342312⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand. Use of Lattice-Boltzmann Method in Mass Transfer for the Wall Shear Stress Calculation in an Unsteady Laminar Flow Downstream of a Cylinder Located in a 2D Rectangular Channel. ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, Jul 2012, Rio Grande, France. pp.889-898, ⟨10.1115/FEDSM2012-72232⟩. ⟨hal-03342315⟩
  • Nadia Mrad, Fethi Aloui, Mohand Tazerout. Performance and Emissions of Diesel Engine Using Bio-Fuel Derived From Waste Fish Oil. ASME 2012 Fluids Engineering Division Summer Meeting, Jul 2012, Rio Grande, United States. pp.1101-1107, ⟨10.1115/FEDSM2012-72292⟩. ⟨hal-00935917⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand. Lattice Boltzmann Method Used to Simulate an Unsteady Flow Around an Obstacle in Laminar Regime. ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, Jul 2011, Hamamatsu, France. pp.3047-3055, ⟨10.1115/AJK2011-13005⟩. ⟨hal-03342302⟩
  • Amine Koched, Michel Pavageau, Fethi Aloui. Détection expérimentale de structures tourbillonnaires au sein d’un jet plan confiné en impact. CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France. ⟨hal-03390866⟩
  • Fethi Aloui, Maher Ben Chiekh, Sassi Ben Nasrallah, Azeddine Kourta. Caractérisation d'un jet synthétique en vue de son utilisation pour le contrôle. CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. ⟨hal-03362532⟩

Poster communications5 documents

  • Heni Dallagi, Ahmad Al Saabi, Christine Faille, Thierry Benezech, Fethi Aloui. CFD simulations of the aqueous foam flow rheological behavior through a half-sudden expansion. Journée Mardi des chercheurs, Mar 2019, Mons, Belgium. ⟨hal-03127920⟩
  • Heni Dallagi, Ahmad Al Saabi, Christine Faille, Laurent Wauquier, Cosmin Gruescu, et al.. Modeling of foam flowing regimes devoted for the detachment of bacillus spores from stainless surface. 2019 Heat Exchanger Fouling & Cleaning Conference, Jun 2019, Józefów, Poland. ⟨hal-03127916⟩
  • Ahmad Al Saabi, Christine Faille, Heni Dallagi, J. Demeester, Laurent Wauquier, et al.. Cleaning in Place by flowing foams: a sustainable way to remove soiled Bacillus spores from stainless steel surface. Université de Lille, Feb 2019, Lille, France. ⟨hal-03367053⟩
  • Ahmad Al Saabi, Christine Faille, Heni Dallagi, Laurent Wauquier, Fethi Aloui, et al.. Cleaning in Place by flowing foams: a sustainable way to remove biofilms from stainless steel pipes. 6ème Edition Wallonie/Nord de France de la Journée des Jeunes Chercheurs : Vers la conception de procédés éco-innovants JJC2019, Nov 2019, Mons, Belgium. ⟨hal-03127902⟩
  • Ahmad Al Saabi, Christine Faille, Heni Dallagi, T. Setiao, L. Bruguier, et al.. Cleaning in Place by flowing foams: a sustainable way to remove soiled Bacillus spores from stainless steel surface. Congrès National de la SFM, Oct 2018, Paris, France. ⟨hal-03367034⟩

Book sections12 documents

  • Edwin Geo Varuvel, Nadia Mrad, Mohand Tazerout, Fethi Aloui. Combustion Analysis of Biofuel Derived from Waste Fish Fat. Exergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.1311-1328, 2018, Green Energy and Technology, ⟨10.1007/978-3-319-62572-0_84⟩. ⟨hal-03449993⟩
  • Ramla Gheith, Houda Hachem, Fethi Aloui, Sassi Ben Nasrallah. Stirling Engines. Comprehensive Energy Systems, 4, Elsevier, pp.169-208, 2018, ⟨10.1016/B978-0-12-809597-3.00409-0⟩. ⟨hal-03450107⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand. Experimental Investigations of Taylor-Couette Flow Using PIV and Electrochemical Techniques. Green Energy and Technology book series, in Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, pp.559-581, 2018, ⟨10.1007/978-3-319-62572-0_37⟩. ⟨hal-03342275⟩
  • Insaf Mehrez, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. Numerical and Dynamic Study of Flow Instabilities and Heat Transfer at a Backward-Facing Step Using the Lattice Boltzmann Method. Exergy for A Better Environment and Improved Sustainability : Fundamentals, 1, Springer International Publishing, pp.509-526, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_34⟩. ⟨hal-03432047⟩
  • Wafik Abassi, Fethi Aloui, Sassi Ben Nasrallah, Jack Legrand. Experimental Investigations of Taylor-Couette Flow Using PIV and Electrochemical Techniques. Springer. Exergy for A Better Environment and Improved Sustainability 1, pp.559-581, 2018, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_37⟩. ⟨hal-02547333⟩
  • Emma Berrich Betouche, Fethi Aloui, Jack Legrand. Radial Distribution of Mass Transfer and Wall Shear Instantaneous Rates in Couette-Taylor Flow. Springer. Green Energy and Technology book series, in Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, pp.583-599, 2018, ⟨10.1007/978-3-319-62572-0_38⟩. ⟨hal-02547338⟩
  • Emma Berrich Betouche, Fethi Aloui, Jack Legrand. Experimental Investigations on Oscillatory Couette-Taylor Flow Wall Shear Stress Behaviour Using Electrochemical Technique: High Modulation Effect. Springer. Green Energy and Technology book series, in Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, pp.527-542, 2018. ⟨hal-02547286⟩
  • Emna Berrich, Asma Dhahak, Abdel Aziz Touati, Fethi Aloui. Experimental Investigation of Polypropylene Pyrolysis for Fuel Production. Exergy for A Better Environment and Improved Sustainability, 2, pp.461-470, 2018, ⟨10.1007/978-3-319-62575-1_33⟩. ⟨hal-02634670⟩
  • Ramla Gheith, Houda Hachem, Fethi Aloui, Sassi Ben Nasrallah. Experimental and Theoretical Investigation of Flows Inside a Gamma Stirling Engine Regenerator. Exergy for A Better Environment and Improved Sustainability : Fundamentals, 1, Springer International Publishing, pp.383-395, 2018, Green Energy and Technology, 978-3-319-62571-30. ⟨10.1007/978-3-319-62572-0_27⟩. ⟨hal-03432033⟩
  • Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah. A CFD Analysis of the Air Flow Through the Stirling Engine’s Singularities. Exergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.271-287, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_19⟩. ⟨hal-03432775⟩
  • Nadia Mrad, Edwin Geo Varuvel, Fethi Aloui, Mohand Tazerout. Experimental Analysis of Biofuel and Undistilled Biofuel from Waste Fish Fat in Diesel Engine. Exergy for A Better Environment and Improved Sustainability 1, Springer International Publishing, pp.1339-1359, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0_86⟩. ⟨hal-03432725⟩
  • Emna Berrich, Fethi Aloui, Jack Legrand. Effect on Wall Shear Rates of Taylor Vortex Instabilities Induced by Progressive Variation of the Inner Cylinder. Progress in Clean Energy, 1, pp.891-908, 2015, Analysis and Modeling, 978-3-319-16709-1. ⟨10.1007/978-3-319-16709-1_65⟩. ⟨hal-02567304⟩

Directions of work or proceedings2 documents

  • Fethi Aloui, Ibrahim Dincer. Exergy for A Better Environment and Improved Sustainability 1. Springer International Publishing, 2018, Green Energy and Technology, 978-3-319-62572-0. ⟨10.1007/978-3-319-62572-0⟩. ⟨hal-03442242⟩
  • Fethi Aloui, Ibrahim Dincer. Exergy for A Better Environment and Improved Sustainabilty: Environment, Sustainable Buildings and Energy Strategies and Policies. 2, Springer International Publishing, 2018, Green Energy and Technology, 978-3-319-62574-4. ⟨10.1007/978-3-319-62575-1⟩. ⟨hal-03442250⟩

Theses1 document

  • Fethi Aloui. Étude des écoulements monophasiques et diphasiques dans les élargissements brusques axisymétrique et bidimensionnel. Autre [cond-mat.other]. Institut National Polytechnique de Lorraine, 1994. Français. ⟨NNT : 1994INPL055N⟩. ⟨tel-01751726⟩