Sébastien Joannès

Documents

Identifiants chercheurs

sebastien-joannes
ResearcherId : M-9707-2014
IdRef : 135323215
0000-0002-9360-1643
ResearcherId : http://www.researcherid.com/rid/M-9707-2014

Présentation

Publications

	Cyclic creep strain rate criterion for short-fibre reinforced thermoplastics: Validation of creep and fatigue performance across a wide range of load ratios S. Gillet , F.L. Taussé Kamdoum , N. Bedrici , S. Joannès , L. Laiarinandrasana International Journal of Fatigue, 2024, 183, pp.108257. ⟨10.1016/j.ijfatigue.2024.108257⟩ Article dans une revue hal-04520530v1
	Mechanisms of damage and fracture of aramid fibers: Focus on the role of microfibril cooperativity in fracture toughness Clotilde Richard , Bruno Bresson , Maxime Bès , Laura Schittecatte , Solène Le Roux Journal of Polymer Science, 2023, ⟨10.1002/pol.20230400⟩ Article dans une revue hal-04209297v1
	Short-term creep and low cycle fatigue unified criterion for a hybridised composite material Stéphane Gillet , Thomas Jacopin , Sébastien Joannès , Nacera Bedrici , Lucien Laiarinandrasana International Journal of Fatigue, 2022, 155, pp.106571. ⟨10.1016/j.ijfatigue.2021.106571⟩ Article dans une revue hal-03462858v1
	Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness Sébastien Joannès , Faisal Islam , Lucien Laiarinandrasana Applied Composite Materials, 2020, 27 (3), pp.165-184. ⟨10.1007/s10443-020-09803-9⟩ Article dans une revue hal-03110082v1
	Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites Ashok Rajpurohit , Sébastien Joannès , Vicky Singery , Philippe Sanial , Lucien Laiarinandrasana Journal of Composites Science, 2020, 4 (1), pp.6. ⟨10.3390/jcs4010006⟩ Article dans une revue hal-02469579v1
	Analytical modelling of the effect of morphological fluctuations on the transverse elastic behaviour of unidirectional fibre reinforced composites Jennifer Blondel , Sébastien Joannès , Eveline Hervé-Luanco International Journal of Solids and Structures, 2020, 206, pp.436-455. ⟨10.1016/j.ijsolstr.2020.06.001⟩ Article dans une revue hal-03109172v1
	Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup Faisal Islam , Sébastien Joannès , Steve Bucknell , Yann Leray , Anthony R. Bunsell Journal of Reinforced Plastics and Composites, 2020, 39 (3-4), pp.144 - 162. ⟨10.1177/0731684419873712⟩ Article dans une revue hal-02321387v1
	Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres Faisal Islam , Sébastien Joannès , Lucien Laiarinandrasana Journal of Composites Science, 2019, 3 (3), pp.69. ⟨10.3390/jcs3030069⟩ Article dans une revue hal-02321373v1
	A consistent experimental protocol for the strain rate characterization of thermoplastic fabrics Fabien Coussa , Jacques Renard , Sébastien Joannès , Jean-Christophe Teissedre , Rémy Bompoint Strain, 2017, 53 (3), pp.e12220. ⟨10.1111/str.12220⟩ Article dans une revue hal-01610204v1
	Observations by in-situ X-ray synchrotron computed tomography of the microstructural evolution of semi-crystalline Polyamide 11 during deformation Pierre-Alexis Poulet , Gilles Hochstetter , Andrew King , Henry Proudhon , Sébastien Joannès Polymer Testing, 2016, 56, pp.245-260. ⟨10.1016/j.polymertesting.2016.10.023⟩ Article dans une revue hal-01421561v1
	Multiscale modelling of transport phenomena for materials with n-layered embedded fibres. Part I: Analytical and numerical-based approaches Eveline Hervé-Luanco , Sébastien Joannès International Journal of Solids and Structures, 2016, 97-98, pp.625-636. ⟨10.1016/j.ijsolstr.2016.05.015⟩ Article dans une revue hal-01393906v1
	Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing Judith Wollbrett-Blitz , Sébastien Joannès , Rémi Bruant , Christophe Le Clerc , Marc Romero de La Osa Journal of Polymer Science Part B: Polymer Physics, 2016, 54 (3), pp.374-384. ⟨10.1002/polb.23763⟩ Article dans une revue hal-01272319v1
	Modélisation et définition d’une cellule élémentaire statistiquement représentative. Application à un composite renforcé en fibres courtes unidirectionnelles François Rasselet , Sébastien Joannès , Jacques Renard , Emilie Roche , Sébastien Pautard Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2016, 26 (2), pp.231-264. ⟨10.3166/RCMA.26.231-264⟩ Article dans une revue hal-02074287v1
	Multiscale modelling of transport phenomena for materials with n-layered embedded fibres. Part II : Investigation of fibre packing effects Sébastien Joannès , Eveline Hervé-Luanco International Journal of Solids and Structures, 2016, 97-98, pp.566-574. ⟨10.1016/j.ijsolstr.2016.06.026⟩ Article dans une revue hal-01394147v1
	Vers de nouvelles applications pour les fibres aramides Judith Wollbrett-Blitz , Anthony R. Bunsell , Jean Louis Halary , Sébastien Joannès , Alba Marcellan L'Actualité Chimique, 2014, 390, pp.25-27 Article dans une revue hal-01102367v1
	A simple method for modeling the concentration-dependent water sorption in reinforced polymeric materials Sébastien Joannès , Laurent Mazé , Anthony R. Bunsell Composites Part B: Engineering, 2014, 57, pp.219-227. ⟨10.1016/j.compositesb.2013.10.004⟩ Article dans une revue hal-00905457v1
	A micromechanical damage characterization and the modeling of a mineral filled epoxy adhesive Sébastien Joannès Mechanics of Materials, 2014, 75, pp.111-124. ⟨10.1016/j.mechmat.2014.04.009⟩ Article dans une revue hal-00509616v1
	A concentration-dependent diffusion coefficient model for water sorption in composite Sébastien Joannès , Laurent Mazé , Anthony R. Bunsell Composite Structures, 2014, 108, pp.111-118. ⟨10.1016/j.compstruct.2013.09.007⟩ Article dans une revue hal-00904085v1
	The role of talc particles in a structural adhesive submitted to fatigue loadings Sébastien Joannès , Jacques Renard , Vladimir Gantchenko International Journal of Fatigue, 2010, 32, pp.66-71. ⟨10.1016/j.ijfatigue.2009.02.021⟩ Article dans une revue hal-00436456v1
	Influence de la microstructure sur les effets d'épaisseur dans les joints collés Sébastien Joannès , Olivier Mario , Vladimir Gantchenko , Jacques Renard , Martin E.R. Shanahan Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2006, 16 (3), pp.363-383 Article dans une revue hal-00149393v1

	How surface treatment and/or reactive agents allow closed loop recycling of PLA/Flax and PLA/Bamboo reinforced composites to be performed ? J. Lopez-Cuesta , Herve Nlandu-Mayamba , A. Taguet , Perrin Didier , Florence Delor-Jestin PPS 38 - The 38th International Conference of the Polymer Processing Society, May 2023, St Gallen, Switzerland Communication dans un congrès hal-04172466v1
	Modifications de l’interface pour des composites recyclés fibres naturelles/PLA H. Nlandu-Mayamba , A. Taguet , Perrin Didier , H. Askanian , Florence Delor-Jestin Techday : Recyclage des matériaux biosourcés, Nov 2022, Ladoux, France Communication dans un congrès hal-03938102v1
	Accounting for local morphological fluctuations in the prediction of the transverse elastic behaviour of UD composites Sébastien Joannès , Jennifer Blondel , Eveline Hervé-Luanco ECCM 20 - 20th European Conference on Composite Materials, Jun 2022, Lausanne, Switzerland Communication dans un congrès hal-03747790v1
	Effects of local mesostructure on the damage mechanisms in a fibre-reinforced polyamide composite studied by in situ laminography and digital volume correlation Cristian Ovalle , Julie Brun , Lukas Helfen , M Hurst , X Kong 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives, Sep 2021, Les Diablerets (online), Switzerland Communication dans un congrès hal-03509483v1
	The Fascinating World of Technical Fibres Sébastien Joannès 9th International Conference on Applied Hair Science, TRI's Hair Conference 2021, Jun 2021, on-line, United States Communication dans un congrès hal-03622016v1
	Towards an understanding of the mechanical response of aramid fibers at the filament scale Clotilde Richard , Sébastien Joannès , Alba Marcellan APS March Meeting 2021, Mar 2021, Virtual - Time Zone: Central Daylight Time, United States Communication dans un congrès hal-03296383v1
	Propagation of uncertainty from constituents to structural assessments in composite strength modelling Faisal Islam , Sébastien Joannès , Lucien Laiarinandrasana ICCS 23 - 23th International Conference on Composites Structures, Sep 2020, Porto, Portugal Communication dans un congrès hal-03110194v1
	Characterization and statistical analysis of single fiber strength of fibers at various processing stages Ashok Rajpurohit , Sébastien Joannès , Faisal Islam , Vicky Singery , Steve Bucknell ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia Communication dans un congrès hal-02308834v1
	Effect of input properties on the predicted failure of a composite pressure vessel using a multiscale model Martinus P Widjaja , Faisal Islam , Sébastien Joannès , Anthony Bunsell , G. Mair FiBreMoD Conference, KU Leuven, Dec 2019, Leuven, Belgium Communication dans un congrès hal-02439665v1
	Further Insights into the Fatigue of Hair Fibres through Statistical Analysis and Relevance to Hair Care Applications Rebecca J Lunn , Yann Leray , Sébastien Joannès , Faisal Islam , Steve Bucknell HairS'19 DWI, Sep 2019, Schluchsee, Germany Communication dans un congrès hal-02323094v1
	Adaptation of Weibull analysis to represent strength behaviour of brittle fibres Faisal Islam , Sébastien Joannès , Anthony Bunsell , Lucien Laiarinandrasana ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia Communication dans un congrès hal-02284784v1
	Étude de l'influence des fluctuations morphologiques microscopiques sur le comportement élastique transverse de composites unidirectionnels Jennifer Blondel , Sébastien Joannès , Eveline Hervé-Luanco JNC 21 - 21èmes Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France Communication dans un congrès hal-02420775v1
	Effect of uncertainty in characterization on the variability of fibre strength distributions Faisal Islam , Lucien Laiarinandrasana , Sébastien Joannès ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Feb 2019, Varanasi, India Communication dans un congrès hal-02322007v1
	Effect of the Time Dependent Loading of Type IV Cylinders using a Multiscale Model Martinus P. Widjaja , Marco Alves , Mark Mavrogordato , Sébastien Joannès , Anthony R. Bunsell ICSH 2019 - 8th International Conference on Hydrogen Safety, Sep 2019, Adelaide, Australia Communication dans un congrès hal-02315016v1
	Investigation on damage mechanisms in both continuous and short fibre reinforced thermoplastic Stéphane Gillet , Patrick Aimedieu , Isabelle Jeanneau , Frederic Canevet , Nacera Bedrici FDM2019, International Conference On Fracture and Damage Mechanics, Sep 2019, Rhodes, Greece Communication dans un congrès hal-02501104v1
	Development and performance evaluation of inter-ply and intra-ply hybrid fabric reinforcements and their composites Ashok Rajpurohit , Vicky Singery , Sébastien Joannès , Philippe Sanial , Lucien Laiarinandrasana ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Feb 2019, Varanasi, India Communication dans un congrès hal-02308847v1
	Effect of through-thickness compressive stress and porosity on the tensile strength of carbon-fibre reinforced composites Jan Rojek , Sébastien Joannès , Jean-Christophe Teissedre , Lucien Laiarinandrasana , Anthony Bunsell ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia Communication dans un congrès hal-02282421v1
	The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel Martinus P. Widjaja , Sébastien Joannès , Anthony R. Bunsell , Georg Mair , Alain Thionnet ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 8 p Communication dans un congrès hal-01853254v1
	Manufacturing and performance of hybrid fabric reinforcements and their composites Ashok Rajpurohit , Vicky Singery , Sébastien Joannès , Philippe Sanial , Lucien Laiarinandrasana ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 8 p Communication dans un congrès hal-01958219v1
	Towards accurate and efficient single fibre characterization to better assess failure strength distribution Faisal Islam , Sébastien Joannès , Steve Bucknell , Yann Leray , Anthony Bunsell ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 7 p Communication dans un congrès hal-01958211v1
	Modelling the effect of porosity on the mechanical properties of unidirectional composites. The case of thick-walled pressure vessels Jan Rojek , Sébastien Joannès , Mark Mavrogordato , Lucien Laiarinandrasana , Anthony Bunsell ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 7 p Communication dans un congrès hal-01958201v1
	Defining a reduced volume zone for the simulation of burst test on a composite pressure vessels Martinus P. Widjaja , Sébastien Joannès , Anthony Bunsell , G. Mair , Alain Thionnet ICSAAM 2018 - 8th International Conference on Structural Analysis of Advanced Materials, Aug 2018, Tarbes, France. 4 p Communication dans un congrès hal-01959246v1
	Improvements in Determination of Carbon Fibre Strength Distribution Using Automation and Statistical Data Faisal Islam , Steve Bucknell , Yann Leray , Anthony Bunsell , Lucien Laiarinandrasana Fiber Society's Spring 2018 Conference, The Fiber Society, Jun 2018, Tokyo, Japan Communication dans un congrès hal-01959309v1
	Analytical and numerical-based approach to predict the influence of morphological fluctuations on the effective transverse elastic behaviour of a transversely random UD composite Jennifer Blondel , Sébastien Joannès , Eveline Hervé-Luanco ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece Communication dans un congrès hal-02092734v1
	Polymer fibres : Multiaxial mechanical characterisation at the single fibre scale Sébastien Joannès ACE-X 2017 - 11th International Conference on Advanced Computational Engineering and Experimenting, Jul 2017, Vienna, Austria Communication dans un congrès hal-02062227v1
	Influence de la vitesse sur le comportement mécanique de composites tissés à matrice thermoplastique Fabien Coussa , Jacques Renard , Sébastien Joannès , Rémy Bompoint , Nicolas Feld JNC 20 - 20èmes Journées Nationales sur les Composites, École des Ponts ParisTech (ENPC), Jun 2017, Champs-sur-Marne, France. 10 p Communication dans un congrès hal-01621625v1
	A rational fibre packing description to model and predict the effective diffusivity/conductivity of a transversely random UD composite: An analytical and numerical based appraoch Sébastien Joannès , Eveline Hervé-Luanco ECCM 17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany Communication dans un congrès hal-02062183v1
	Experimental and numerical study of the elastic and damage strain rate sensitivity of GFRP composites Fabien Coussa , Jacques Renard , Sébastien Joannès , Rémy Bompoint , Nicolas Feld ICCS 19 - 19th International Conference on Composites Structures, Sep 2016, Porto, Portugal Communication dans un congrès hal-02062198v1
	A morphological indicator for the description of the short-fiber position effect on the behaviour of a periodic RVE François Rasselet , Sébastien Joannès , Emilie Roche , Sébastien Pautard , Jacques Renard Digimat Users’ Conference 2016, Oct 2016, Cascais, Portugal Communication dans un congrès hal-02062205v1
	A morphological indicator for the description of the short-fiber position effect on the behaviour of a periodic RVE François Rasselet , Sébastien Joannès , Emilie Roche , Sébastien Pautard , Jacques Renard ECCM 17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany Communication dans un congrès hal-02062177v1
	Durability assessment of a highly reinforced thermoplastic composite: Experimental and microstructural simulations of the transverse damage kinetics Pierre-Alexis Poulet , Sébastien Joannès , Lucien Laiarinandrasana ICFC 6 - 6th International Conference on Fatigue of Composites, Mar 2015, Paris, France Communication dans un congrès hal-02062078v1
	Influence de la microstructure sur l’endommagement transverse d’un composite unidirectionnel à matrice thermoplastique Pierre-Alexis Poulet , Sébastien Joannès , Lucien Laiarinandrasana JNC 19 - 19èmes Journées Nationales sur les Composites, Jun 2015, Lyon, Villeurbane, France Communication dans un congrès hal-02062123v1
	Effet de la variabilité de la microstructure sur les propriétés mécaniques d’un composite UD thermoplastique. Cas de la flexion à trois points Pierre-Alexis Poulet , Lucien Laiarinandrasana , Sébastien Joannès DEPOS 26 - 26ème congrès sur la déformation des polymères solides, Sep 2015, Brest, France Communication dans un congrès hal-02073787v1
	Une démarche préliminaire vers une caractérisation fiable en dynamique "application à un composite thermoplastique" Fabien Coussa , Jacques Renard , Sébastien Joannès , R. Bompoint , N. Feld CFM 2015 - 22ème congrès français de mécanique, Aug 2015, Lyon, France. 5 p Communication dans un congrès hal-01251207v1
	Analytical and numerical methods to access the mechanical elastic properties of a deformed woven reinforced composite material Adrien Lebrun , Sébastien Joannès , Jacques Renard ECCM 16 - 16th European Conference on Composite Materials, Jun 2014, Seville, Spain Communication dans un congrès hal-02062062v1
	Diametral compression tests of a pultruded PA6 reinforced glass fibre composite: A macro and micro transverse damage kinetic investigation Henri-Alexandre Cayzac , Sébastien Joannès , Lucien Laiarinandrasana ECCM 16 - 16th European Conference on Composite Materials, Jun 2014, Seville, Spain Communication dans un congrès hal-02062053v1
	Fissuration par compression transverse d’un matériau composite à matrice thermoplastique pultrudé Henri-Alexandre Cayzac , Sébastien Joannès , Lucien Laiarinandrasana DEPOS 25 - 25ème congrès sur la déformation des polymères solides, Mar 2014, Presqu'île de Giens, France Communication dans un congrès hal-02073808v1
	Experimental and numeric multiscale analyses of failure mechanisms on pultruded polymeric composite material Henri-Alexandre Cayzac , Lucien Laiarinandrasana , Sébastien Joannès ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. pp.6287-6291 Communication dans un congrès hal-00868680v1
	New experimental techniques and several micromechanical models for assessing the out-of-plan shear modulus properties of short glass fibre reinforced polyamide Ekkarin Phongphinittana , Pongsak Nimdum , Sébastien Joannès , Jacques Renard , Vladimir Gantchenko JESCM13 - 13th Euro-Japanese Symposium on Composite Materials, Nov 2013, Bouguenais (Nantes), France Communication dans un congrès hal-02499388v1
	Analytical and finite element analyses on reliability of carbon fibre reinforced plastics H.Y. Chou , Anthony R. Bunsell , Alain Thionnet , Sébastien Joannès ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. pp.5142-5150 Communication dans un congrès hal-00868632v1
	Proof testing and lifetime reliability of carbon fibre reinforced composite pressure vessels Clémence Devilliers , Anthony R. Bunsell , Alain Thionnet , H.Y. Chou , Sébastien Joannès ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. pp.6038-6045 Communication dans un congrès hal-00868659v1
	Structure/Property Relationships of a Single Para-aramid Fibre Judith Wollbrett-Blitz , Alba Marcellan , Sébastien Joannès Fiber Society's Spring 2013 Conference, The Fiber Society, May 2013, Greelong, Australia Communication dans un congrès hal-02061473v1
	Longitudinal and Transverse properties and molecular motions in single aramid fibers Judith Wollbrett-Blitz , Alba Marcellan , Sébastien Joannès 34APS - 34th Australasian Polymer Symposium, Jul 2013, Darwin, Convention Centre, Australia Communication dans un congrès hal-02061483v1
	Continuous fibre reinforced thermoplastic joining, a laser-welded seam multi-axial mechanical characterization and modelling Sébastien Joannès ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p Communication dans un congrès hal-01103937v1
	Experimental investigation and finite element modelling of microstructural composite material Henri-Alexandre Cayzac , Lucien Laiarinandrasana , Sébastien Joannès ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p Communication dans un congrès hal-01103975v1
	Predicting mechanical behaviour and damage kinetics of a 3D interlock composite materials by using a multiscale approach Mamadou Abdoul Mbacke , Jacques Renard , Alain Thionnet , Sébastien Joannès ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy Communication dans un congrès hal-01109412v1
	Durability of a 3D woven composite assisted by finite element multi-scale modelling Wassim Trabelsi , Lucien Laiarinandrasana , Alain Thionnet , Sébastien Joannès ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p Communication dans un congrès hal-01109487v1
	Mechanical optimization of a pultruded thermoplastic composite profile Sébastien Joannès ACE-X 2010 - 4th International Conference on Advanced Computational Engineering and Experimenting, Jul 2010, Paris, France Communication dans un congrès hal-02329669v1
	Phenomenological modeling of the elasto-viscoplastic damage behavior of talc-filled epoxy adhesives Sébastien Joannès ETDCM 9 - 9th Seminar on Experimental Techniques and Design in Composite Materials, Sep 2009, Vicenza, Italy Communication dans un congrès hal-02061280v1
	p-FEM applied to adhesively bonded composite structures and multi-materials parts Sébastien Joannès , Jacques Renard ICCS 15 - 15th International Conference on Composites Structures, Jun 2009, Porto, Portugal Communication dans un congrès hal-02061993v1
	Abaqus user element for an accurate modeling of adhesive joints on coarse meshes Sébastien Joannès , Jacques Renard SSC 2009 - SIMULIA Customer Conference, DS SIMULIA, May 2009, London, United Kingdom Communication dans un congrès hal-02061277v1
	Evaluation of fatigue damage mechanisms of multi-materials bonded joints Sébastien Joannès , Vladimir Gantchenko , Jacques Renard ICFC 4 - 4th International Conference on Fatigue of Composites, Sep 2007, Kaiserslautern, Germany Communication dans un congrès hal-02061279v1
	Influence de la microstructure sur les propriétés mécaniques des joints collés Olivier Mario , Sébastien Joannès , Jacques Renard , Vladimir Gantchenko Matériaux 2006, 2006, Dijon, France. 7 p Communication dans un congrès hal-00144495v1

	Investigation on damage mechanisms in both continuous and short fibre reinforced thermoplastic Stéphane Gillet , Patrick Aimedieu , Isabelle Jeanneau , Frederic Canevet , Nacera Bedrici FD2019, 8th Edition of the international conference on fatigue design, Nov 2019, Senlis, France Poster de conférence hal-02501071v1
	Modelling an Improved NOL Ring Test Using a Reduced Volume Method for the Characterisation of Composite Cylinders Martinus P. Widjaja , Sébastien Joannès , Anthony R. Bunsell , Georg Mair , Alain Thionnet ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia Poster de conférence hal-02316280v1
	Etude de l'endommagement d'un composite thermoplastique à fibres continues Stéphane Gillet , Y. Tirel , F. Canevet , P. Dewailly , Lucien Laiarinandrasana Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p., 2017 Poster de conférence hal-01708041v1
	Multiscale modelling of a highly reinforced thermoplastic composite: from microstructural simulations of the transverse damage kinetics towards engineering structure computations Pierre-Alexis Poulet , Sébastien Joannès , Lucien Laiarinandrasana ECCM 17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany Poster de conférence hal-02062170v1
	Etude de la cinétique d’endommagement d’un composite à matrice thermoplastique renforcé en fibres courtes de carbone François Rasselet , Jacques Renard , Sébastien Joannès , Emilie Roche , Sébastien Pautard JNC 19 - 19èmes Journées Nationales sur les Composites, Jun 2015, Lyon, Villeurbane, France Poster de conférence hal-02062103v1
	Multi-axial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing Judith Wollbrett-Blitz , Clément Larquet , Sébastien Joannès , Rémi Bruant , Christophe Le Clerc DEPOS 26 - 26ème congrès sur la déformation des polymères solides, Sep 2015, Brest, France Poster de conférence hal-02073777v1
	Etude du comportement thermo-mécanique des fibres aramides Judith Wollbrett-Blitz , Alba Marcellan , Sébastien Joannès DEPOS 24 - 24ème congrès sur la déformation des polymères solides, Sep 2012, Lyon, France Poster de conférence hal-02062324v1

	Fundamentals of Fibre Reinforced Composite Materials Anthony R. Bunsell , Sébastien Joannès , Alain Thionnet CRC Press, Taylor & Francis Group, 2021, 9780367023737. ⟨10.1201/9780429399909⟩ Ouvrages hal-03462768v1

	Testing and characterization of fibers Anthony R. Bunsell , Sébastien Joannès , Alba Marcellan ed. A.R. Bunsell. Handbook of properties of textile and technical fibres, Elsevier-Woodhead Publ, pp.21-55, 2018, ⟨10.1016/B978-0-08-101272-7.00002-X⟩ Chapitre d'ouvrage hal-01701860v1

	Caractérisation mécanique et outil d'aide au dimensionnement des collages structuraux Sébastien Joannès Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1528⟩ Thèse tel-00288527v1

	Comportement et durabilité des composites à renforts fibreux et matrices organiques Sébastien Joannès Mécanique des matériaux [physics.class-ph]. Université de Poitiers, 2022 HDR tel-03726556v1

Sébastien Joannès

Présentation

Publications

Cyclic creep strain rate criterion for short-fibre reinforced thermoplastics: Validation of creep and fatigue performance across a wide range of load ratios

Mechanisms of damage and fracture of aramid fibers: Focus on the role of microfibril cooperativity in fracture toughness

Short-term creep and low cycle fatigue unified criterion for a hybridised composite material

Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness

Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites

Analytical modelling of the effect of morphological fluctuations on the transverse elastic behaviour of unidirectional fibre reinforced composites

Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup

Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres

A consistent experimental protocol for the strain rate characterization of thermoplastic fabrics

Observations by in-situ X-ray synchrotron computed tomography of the microstructural evolution of semi-crystalline Polyamide 11 during deformation

Multiscale modelling of transport phenomena for materials with n-layered embedded fibres. Part I: Analytical and numerical-based approaches

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

Modélisation et définition d’une cellule élémentaire statistiquement représentative. Application à un composite renforcé en fibres courtes unidirectionnelles

Multiscale modelling of transport phenomena for materials with n-layered embedded fibres. Part II : Investigation of fibre packing effects

Vers de nouvelles applications pour les fibres aramides

A simple method for modeling the concentration-dependent water sorption in reinforced polymeric materials

A micromechanical damage characterization and the modeling of a mineral filled epoxy adhesive

A concentration-dependent diffusion coefficient model for water sorption in composite

The role of talc particles in a structural adhesive submitted to fatigue loadings

Influence de la microstructure sur les effets d'épaisseur dans les joints collés

How surface treatment and/or reactive agents allow closed loop recycling of PLA/Flax and PLA/Bamboo reinforced composites to be performed ?

Modifications de l’interface pour des composites recyclés fibres naturelles/PLA

Accounting for local morphological fluctuations in the prediction of the transverse elastic behaviour of UD composites

Effects of local mesostructure on the damage mechanisms in a fibre-reinforced polyamide composite studied by in situ laminography and digital volume correlation

The Fascinating World of Technical Fibres

Towards an understanding of the mechanical response of aramid fibers at the filament scale

Propagation of uncertainty from constituents to structural assessments in composite strength modelling

Characterization and statistical analysis of single fiber strength of fibers at various processing stages

Effect of input properties on the predicted failure of a composite pressure vessel using a multiscale model

Further Insights into the Fatigue of Hair Fibres through Statistical Analysis and Relevance to Hair Care Applications

Adaptation of Weibull analysis to represent strength behaviour of brittle fibres

Étude de l'influence des fluctuations morphologiques microscopiques sur le comportement élastique transverse de composites unidirectionnels

Effect of uncertainty in characterization on the variability of fibre strength distributions

Effect of the Time Dependent Loading of Type IV Cylinders using a Multiscale Model

Investigation on damage mechanisms in both continuous and short fibre reinforced thermoplastic

Development and performance evaluation of inter-ply and intra-ply hybrid fabric reinforcements and their composites

Effect of through-thickness compressive stress and porosity on the tensile strength of carbon-fibre reinforced composites

The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel

Manufacturing and performance of hybrid fabric reinforcements and their composites

Towards accurate and efficient single fibre characterization to better assess failure strength distribution

Modelling the effect of porosity on the mechanical properties of unidirectional composites. The case of thick-walled pressure vessels

Defining a reduced volume zone for the simulation of burst test on a composite pressure vessels

Improvements in Determination of Carbon Fibre Strength Distribution Using Automation and Statistical Data

Analytical and numerical-based approach to predict the influence of morphological fluctuations on the effective transverse elastic behaviour of a transversely random UD composite

Polymer fibres : Multiaxial mechanical characterisation at the single fibre scale

Influence de la vitesse sur le comportement mécanique de composites tissés à matrice thermoplastique

A rational fibre packing description to model and predict the effective diffusivity/conductivity of a transversely random UD composite: An analytical and numerical based appraoch

Experimental and numerical study of the elastic and damage strain rate sensitivity of GFRP composites

A morphological indicator for the description of the short-fiber position effect on the behaviour of a periodic RVE

A morphological indicator for the description of the short-fiber position effect on the behaviour of a periodic RVE

Durability assessment of a highly reinforced thermoplastic composite: Experimental and microstructural simulations of the transverse damage kinetics

Influence de la microstructure sur l’endommagement transverse d’un composite unidirectionnel à matrice thermoplastique

Effet de la variabilité de la microstructure sur les propriétés mécaniques d’un composite UD thermoplastique. Cas de la flexion à trois points

Une démarche préliminaire vers une caractérisation fiable en dynamique "application à un composite thermoplastique"

Analytical and numerical methods to access the mechanical elastic properties of a deformed woven reinforced composite material

Diametral compression tests of a pultruded PA6 reinforced glass fibre composite: A macro and micro transverse damage kinetic investigation

Fissuration par compression transverse d’un matériau composite à matrice thermoplastique pultrudé

Experimental and numeric multiscale analyses of failure mechanisms on pultruded polymeric composite material

New experimental techniques and several micromechanical models for assessing the out-of-plan shear modulus properties of short glass fibre reinforced polyamide

Analytical and finite element analyses on reliability of carbon fibre reinforced plastics

Proof testing and lifetime reliability of carbon fibre reinforced composite pressure vessels

Structure/Property Relationships of a Single Para-aramid Fibre

Longitudinal and Transverse properties and molecular motions in single aramid fibers

Continuous fibre reinforced thermoplastic joining, a laser-welded seam multi-axial mechanical characterization and modelling

Experimental investigation and finite element modelling of microstructural composite material

Predicting mechanical behaviour and damage kinetics of a 3D interlock composite materials by using a multiscale approach

Durability of a 3D woven composite assisted by finite element multi-scale modelling

Mechanical optimization of a pultruded thermoplastic composite profile

Phenomenological modeling of the elasto-viscoplastic damage behavior of talc-filled epoxy adhesives

p-FEM applied to adhesively bonded composite structures and multi-materials parts

Abaqus user element for an accurate modeling of adhesive joints on coarse meshes

Evaluation of fatigue damage mechanisms of multi-materials bonded joints

Influence de la microstructure sur les propriétés mécaniques des joints collés

Investigation on damage mechanisms in both continuous and short fibre reinforced thermoplastic

Modelling an Improved NOL Ring Test Using a Reduced Volume Method for the Characterisation of Composite Cylinders

Etude de l'endommagement d'un composite thermoplastique à fibres continues

Multiscale modelling of a highly reinforced thermoplastic composite: from microstructural simulations of the transverse damage kinetics towards engineering structure computations