Skip to Main content

Keywords

Co-authors

Number of documents

70

publications philippe olivier


Journal articles26 documents

  • Laure Moretti, Philippe Olivier, Bruno Castanié, Gérard Bernhart. Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates. Composites Part A: Applied Science and Manufacturing, Elsevier, 2021, 142, ⟨10.1016/j.compositesa.2020.106224⟩. ⟨hal-03078389⟩
  • Laure Moretti, Bruno Castanié, Gérard Bernhart, Philippe Olivier. Characterization and modelling of cure-dependent properties and strains during composites manufacturing. Journal of Composite Materials, SAGE Publications, 2020, 54 (22), pp.3109-3124. ⟨10.1177/0021998320912470⟩. ⟨hal-02514952⟩
  • Philippe Marguerès, Philippe Olivier, Mahamadou Mounkaila, Sonia Sassi, Thierry Camps. Carbon fibres reinforced composites. Electrical impedance analysis: a gateway to smartness. International Journal of Smart and Nano Materials, Taylor & Francis, 2020, 11 (4), pp.417-430. ⟨10.1080/19475411.2020.1843559⟩. ⟨hal-03139946⟩
  • Florian Neveu, Bruno Castanié, Philippe Olivier. The GAP methodology: A new way to design composite structures. Materials and Design, Elsevier, 2019, 172, pp.107755. ⟨10.1016/j.matdes.2019.107755⟩. ⟨hal-02104764⟩
  • Christophe Monnin, Joseph Tamborski, Simon Bejannin, Marc Souhaut, Manon Roques, et al.. Freshening of a Coastal Karst Aquifer Revealed by the Temporal Changes in a Spring Water Composition (La Palme, Southern France). Hydrology, MDPI, 2019, 6 (2), pp.45. ⟨10.3390/hydrology6020045⟩. ⟨hal-02379187⟩
  • Mike Coulson, Eric Dantras, Philippe Olivier, Nathalie Gleizes, Colette Lacabanne. Thermal conductivity and diffusivity of carbon‐reinforced polyetherketoneketone composites. Journal of Applied Polymer Science, Wiley, 2019, 136 (38), pp.47975. ⟨10.1002/app.47975⟩. ⟨hal-02188218⟩
  • Mahamadou Mounkaila, Sonia Sassi, Abbas Hamadi, Philippe Marguerès, Philippe Olivier, et al.. Modelling the electrical behaviour of carbon/epoxy composites and monitoring changes in their microstructure during oven and autoclave curing using electrical impedancemetry. Smart Materials and Structures, IOP Publishing, 2018, ⟨10.1088/1361-665X/aacdba⟩. ⟨hal-01827391⟩
  • Mathieu Fogel, Patricia Parlevliet, Philippe Olivier, Eric Dantras. Manufacturing of conductive structural composites through spraying of CNTs/epoxy dispersions on dry carbon fiber plies. Composites Part A: Applied Science and Manufacturing, Elsevier, 2017, vol. 100, pp. 40-47. ⟨10.1016/j.compositesa.2017.04.020⟩. ⟨hal-01537230⟩
  • Natassia Lona Batista, Philippe Olivier, Gérard Bernhart, Mirabel Cerqueira Rezende, Edson Cocchieri Botelho. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates. Materials Research, Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol), 2016, 19 (1), p. 195-201. ⟨10.1590/1980-5373-MR-2015-0453⟩. ⟨hal-01620301⟩
  • Sonia Sassi, Philippe Marguerès, Philippe Olivier, Rébecca Le Begue. Determination of anisotropic geometrical parameters for the electrical characterization of carbon/epoxy composite during oven curing. Composites Part A: Applied Science and Manufacturing, Elsevier, 2016, 80, pp.204--216. ⟨hal-01950767⟩
  • Lisa Rivière, Antoine Lonjon, Eric Dantras, Colette Lacabanne, Philippe Olivier, et al.. Silver fillers aspect ratio influence on electrical and thermal conductivity in PEEK/Ag nanocomposites. European Polymer Journal, Elsevier, 2016, 85, pp.115-125. ⟨10.1016/j.eurpolymj.2016.08.003⟩. ⟨hal-01469810⟩
  • Everson Kandare, Akbar A. Khatibi, Sanghyun Yoo, Ruoyu Wang, Jun Ma, et al.. Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions. Composites Part A: Applied Science and Manufacturing, Elsevier, 2015, 69, pp.72--82. ⟨hal-01951228⟩
  • L. Mezeix, A. Seman, M. N. M. Nasir, Y. Aminanda, A. Rivai, et al.. Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process. Composite Structures, Elsevier, 2015, 124, pp.196--205. ⟨hal-01951243⟩
  • Mathieu Fogel, Patricia Parlevliet, Matthias Geistbeck, Philippe Olivier, Eric Dantras. Thermal, rheological and electrical analysis of MWCNTs/epoxy matrices. Composites Science and Technology, Elsevier, 2015, vol. 110, pp. 118-125. ⟨10.1016/j.compscitech.2015.02.002⟩. ⟨hal-01131812⟩
  • Matthieu Mulle, Ali Moussawi, Gilles Lubineau, Samuel Durand, Didier Falandry, et al.. Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings. Composite Structures, Elsevier, 2015, 130, pp.75--84. ⟨hal-01951240⟩
  • Ekaterina Pavlenko, François Boyer, Pascal Puech, Philippe Olivier, Andrei Sapelkin, et al.. Origin of mechanical modifications in poly (ether ether ketone)/carbon nanotube composite. Journal of Applied Physics, American Institute of Physics, 2014, 115 (23), pp.234901. ⟨10.1063/1.4883299⟩. ⟨hal-01756989⟩
  • Philippe Marguerès, Thierry Camps, Philippe Olivier. Impédancemétrie électrique pour le monitoring de composites carbone/époxy. Revue des composites et des matériaux avancés, 2014, 24 (2), pp.207-220. ⟨10.3166/rcma.24.207-220⟩. ⟨hal-01952565⟩
  • Philippe Marguerès, Thierry Camps, Mathieu Viargues, Philippe Olivier. Preliminary experimental study on the electrical impedance analysis for in-situ monitoring of the curing of carbon/epoxy composite material for aeronautical and aerospace structures. Measurement Science and Technology, IOP Publishing, 2013, 24 (9), pp.095005. ⟨10.1088/0957-0233/24/9/095005⟩. ⟨hal-02152734⟩
  • Christophe Paris, Gérard Bernhart, Philippe Olivier, Olivier de Almeida. Influence de cycles de cuisson rapides sur le préimprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques. Matériaux & Techniques, EDP Sciences, 2012, 100 (6-7), p.611-622. ⟨hal-01851414⟩
  • Ihab El Sawi, Philippe Olivier, Philippe Demont, Habiba Bougherara. Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin. Journal of Applied Polymer Science, Wiley, 2012, vol. 126, pp.358-366. ⟨10.1002/app.36988⟩. ⟨hal-00825640⟩
  • Ihab El Sawi, Philippe Olivier, Philippe Demont, Habiba Bougherara. Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes. Composites Science and Technology, Elsevier, 2012, vol. 73, pp. 19-26. ⟨10.1016/j.compscitech.2012.08.016⟩. ⟨hal-00904040⟩
  • Philippe Olivier, Ihab El Sawi. Designing curing conditions in order to analyse the influence of process-induced stresses upon some mechanical properties of carbon / epoxy laminates at constant T\textlessSubscript\textgreaterg\textless/Subscript\textgreater and degree of cure. Int J Mater Form, 2010, 3 (2), pp.1373--1389. ⟨10.1007/s12289-009-0676-5⟩. ⟨hal-02193166⟩
  • M. Hautier, D. Lévêque, C. Huchette, Philippe Olivier. Investigation of composite repair method by liquid resin infiltration. Plastics, Rubber and Composites, 2010, 39 (3-5), pp.200--207. ⟨10.1179/174328910X12647080902411⟩. ⟨hal-02193167⟩
  • Christophe Paris, Philippe Olivier, Gérard Bernhart. Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps. International Journal of Material Forming, Springer Verlag, 2010, 3 (Suppl. 1), p.639-642. ⟨10.1007/s12289-010-0851-8⟩. ⟨hal-01847798⟩
  • M. Mulle, Francis Collombet, Philippe Olivier, Redouane Zitoune, C. Huchette, et al.. Assessment of cure-residual strains through the thickness of carbon-epoxy laminates using FBGs Part II: Technological specimen. Composites Part A: Applied Science and Manufacturing, Elsevier, 2009, 40 (10), pp.1534--1544. ⟨10.1016/j.compositesa.2009.06.013⟩. ⟨hal-02194262⟩
  • M. Mulle, Francis Collombet, Philippe Olivier, Y.H. Grunevald. Assessment of cure residual strains through the thickness of carbon-epoxy laminates using FBGs, Part I: Elementary specimen. Composites Part A: Applied Science and Manufacturing, Elsevier, 2009, 40 (1), pp.94--104. ⟨10.1016/j.compositesa.2008.10.008⟩. ⟨hal-02194277⟩

Conference papers40 documents

  • Anh Tuan Le, Philippe Olivier, Quentin Govignon, Alexandre Sangar, Pascal Boulanger, et al.. Imprégnation et transfert de tapis de Nanotubes de Carbone Alignés Verticalement sur du préimprégné. JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 9 p. ⟨hal-02424001⟩
  • Laure Moretti, Bruno Castanié, Gérard Bernhart, Léonard Serrano, Philippe Olivier. Mise en place d'un outil de simulation des déformations induites lors du co-collage de pièces composites en autoclave. JNC21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 10 p. ⟨hal-02420729⟩
  • Philippe Olivier, Laure Moretti, Bruno Castanié, Léonard Serrano, Gérard Bernhart. Implementation of a Simulation Tool of Strains Induced During the Co-bonding of Autoclave-cured Parts. ASC 2019 - 34th Technical Conference of the American Society for Composites, Oct 2019, Atlanta, United States. ⟨10.12783/asc34/31293⟩. ⟨hal-02906323⟩
  • Philippe Olivier, Gilles Dusserre, Philippe Marguerès, Philippe Demont. Nanocomposites, composites à matrices nanochargées : conditions de mise en œuvre et propriétés.. JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 9 p. ⟨hal-02421130⟩
  • Yves Gourinat, Philippe Olivier, Guilhem Michon, Olivier Cherrier. De l'optique dans les structures. Images rapides et mesures optiques à l'Institut Clément Ader. Congrès de la Société Française d’Optique Toulouse 2018, Jul 2018, Toulouse, France. ⟨hal-02018751⟩
  • Yves Gourinat, Philippe Olivier, Guilhem Michon, Olivier Cherrier. De l'optique dans les structures. Images rapides & mesures optiques à l'Institut Clément Ader. Optique Toulouse 2018, Congrès de la Société Française d’Optique, 2018, Toulouse, France. ⟨hal-02020824⟩
  • Laure Moretti, Gilles Dusserre, Bruno Castanié, Philippe Olivier. Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens. ECCM18 - 18th European Conference on Composite Materials, Jun 2018, Athènes, Greece. 8 p. ⟨hal-01867828⟩
  • Léonard Serrano, Philippe Olivier, Jacques Cinquin. Modélisation des cinétiques de polymérisation de résines destinées à la fabrication Hors Autoclave. JNC 20 : Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, Champs sur Marne, France. pp.0. ⟨hal-02868780⟩
  • Léonard Serrano, Philippe Olivier, Jacques Cinquin. Compaction Behavior Of Out-of-Autoclave Prepreg Materials. ESAFORM 2017 (20th International Conference on Forming), Apr 2017, Dublin, Ireland. pp. 1-7. ⟨hal-01666776⟩
  • Florian Neveu, Bruno Castanié, Philippe Olivier. Nouvelle méthodologie de conception pour les structures composites. Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France. ⟨hal-01623257⟩
  • L. Serrano, Philippe Olivier, J. Cinquin. Compaction behaviour of out-of-autoclave prepreg materials. ESAFORM, 2017, Dublin, 2017, Dublin, Ireland. ⟨hal-02043101⟩
  • Florian Neveu, Bruno Castanié, Philippe Olivier. A NEW PRE-DESIGN METHODOLOGY FOR INNOVATIVE COMPOSITE STRUCTURES. International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, 2017, Xi'an, China. ⟨hal-02044391⟩
  • S. Sassi, Philippe Marguerès, M. Mounkaila, T. Camps, Philippe Olivier. GEOMETRICAL INVESTIGATION FOR THE ELECTRICAL CHARACTERIZATION OF T700/M21 CFRP COMPOSITE DURING CURING. ECCM17, 2016, Munich, France. ⟨hal-02048272⟩
  • S. Sassi, Philippe Marguerès, R. Le Begue, Philippe Olivier. DETERMINATION OF GEOMETRICAL PARAMETERS FOR ELECTRICAL CHARACTERIZATION OF A CFRP DURING CURING. 20th International Conference on Composite Materials - ICCM20, 2015, Copenhagen, Denmark. ⟨hal-02052007⟩
  • Ludovic Chevallier, Quentin Govignon, Philippe Olivier, Gérard Bernhart, Martine Mayne-l'Hermite. Mechanical effects of the injection-CVD nanostructuration of carbon-fibre composites investigated by bundle tensile test and DMA. ICCM 20 - 20th International Conference on Composite Materials, May 2015, Copenhagen, Denmark. 10 p. ⟨hal-01686337⟩
  • Y. Aminanda, K. Mansur Ali, M. Nasir, M. Nazreen, A. Rivai, et al.. Spring-back Prediction of CRFP Composite Laminate Ribs. Conference on Advances in Composite Materials and Structures, Istanbul, April 2015, 2015, Istanbul, Turkey. ⟨hal-02052449⟩
  • J. Bouillonnec, Gérard Bernhart, M. Pinault, Philippe Olivier, M. Mayne-l'Hermite. Thermal conductivity enhancement of vertically aligned nanotube carpet reinforced thermoset composites. ICCS18 - 18th International Conference on Composite Structures, 2015, Lisbon, Portugal. ⟨hal-02052586⟩
  • L. Mezeix, M.N. Nasir, L. Aminanda, A. Rivai, Bruno Castanié, et al.. Spring-back prediction through numerical simulation for composite manufacturing using autoclave process. Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, 2014, Harbin, China. ⟨hal-02053995⟩
  • Jonathan Bouillonnec, Émeline Charon, Mathieu Pinault, Gérard Bernhart, G. Leblanc, et al.. Propriétés thermiques de composites nanotubes de carbone verticalement alignés / époxy. Matériaux 2014, Nov 2014, Montpellier, France. ⟨cea-02361712⟩
  • Ludovic Chevallier, Quentin Govignon, Philippe Olivier, Gérard Bernhart, Jonathan Bouillonnec, et al.. Three-dimensional permeability determination of reinforced composites structures with vertically aligned carbon nanotube forests. ECCM 16 - 16th European Conference on Composite Materials, Jun 2014, Seville, Spain. 8 p. ⟨hal-01708891⟩
  • T. Nguyen, Philippe Olivier. THERMAL AND MECHANICAL BEHAVIOUR OF PAN AND PITCHBASED CARBON FIBER WOVEN FABRIC REINFORCED PARTICLE FILLED EPOXY COMPOSITES. ICCM 16 - 16th International Conference on Composite Materials. Sevilla Spain 22-26 June 2014., 2014, Sevilla, Spain. 8 p. ⟨hal-02054331⟩
  • S. Adam, L. Mezeix, A. Rivai, Y. Aminanda, Philippe Olivier, et al.. Experimental and analytical study of flat laminate composite spring-back manufactured through autoclave process. Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, 2014, Harbin, China. ⟨hal-02053906⟩
  • Mahamadou Mounkaila, Thierry Camps, Sonia Sassi, Philippe Marguerès, Philippe Olivier, et al.. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part I : Impedance Analysis and Multiphysic Sensitivity. EWSHM - 7th European Workshop on Structural Health Monitoring, IFFSTTAR, Inria, Université de Nantes, Jul 2014, Nantes, France. ⟨hal-01020396⟩
  • Sonia Sassi, Philippe Marguerès, Thierry Camps, Mahamadou Mounkaila, Philippe Olivier. Cure Monitoring and SHM of Carbon Fiber Reinforced Polymer Part II : Multi-Physical Correlations. EWSHM - 7th European Workshop on Structural Health Monitoring, IFFSTTAR, Inria, Université de Nantes, Jul 2014, Nantes, France. ⟨hal-01020397⟩
  • S. Sassi, Philippe Marguerès, T. Camps, Philippe Olivier. Suivi de cuisson de composites Carbone/Epoxy par impédancemétrie électrique. JNC 18, 2013, Nantes, France. ⟨hal-02183348⟩
  • Philippe Marguerès, T. Camps, Philippe Olivier, S. Sassi, M. Mounkaila. CURE MONITORING OF CFRP: ELECTRICAL IMPEDANCE ANALYSIS. 19th International Conference on Composite Materials - ICCM19, 2013, Montréal, Canada. ⟨hal-02183251⟩
  • Bénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Etude et simulation de la conductivité thermique de matériaux composites à matrice organique. JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p. ⟨hal-01745288⟩
  • Bénédicte Reine, Jérémy Di Tomasou, Gilles Dusserre, Philippe Olivier. Study and simulation of thermal conductivity of organic matrix composites. ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. p.3587-3596. ⟨hal-01769587⟩
  • Jonathan Bouillonnec, Philippe Olivier, Martine Mayne-l'Hermite, Mathieu Pinault, Gérard Bernhart, et al.. Elaboration et étude des propriétés mécaniques de matériaux composites renforcés par des tapis de nanotubes de carbone alignés. JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 10 p. ⟨hal-01761518⟩
  • F. Boyer, Philippe Olivier, F. Pons, P.H. Cadaux. Mechanical and electrical behavior of a PEEK/carbon nanotubes composite. 15th European Conference on Composite Materials, 2012, Venice, Italy. ⟨hal-02186853⟩
  • Bénédicte Reine, Jérémy Di Tomaso, Gilles Dusserre, Philippe Olivier. Study of thermal behaviour of thermoset polymer matrix filled with micro and nanoparticles. ECCM 15 -15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 9 p. ⟨hal-01764778⟩
  • Philippe Marguerès, T. Camps, Philippe Olivier. Impédancemétrie électrique pour le monitoring de composites Carbone/Epoxy. Journée Scientifique et Technique (JST) AMAC "Smart Material : intégration de fonctions et comportement mécanique des multi-matériaux" ,Laval, France, 2012, Laval, France. ⟨hal-02186314⟩
  • Philippe Olivier, Christophe Paris, François Boyer, Ihab El Sawi, Gérard Bernhart. Elaboration des matériaux composites : procédés et simulations associées. Mecamat Aussois 2011, Jan 2011, Aussois, France. p.17-24. ⟨hal-01771338⟩
  • Ophélie Westphal, Nadia Bahlouli, Yves Rémond, Philippe Olivier, Laurent Gornet, et al.. Caractérisation des dommages au choc de composites stratifiés aéronautiques : application à la chute d'objets. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.172. ⟨hal-00597545⟩
  • Christophe Paris, Philippe Olivier, Gérard Bernhart. Time reduction of manufacturing cycle in a high heating ramp process for carbon/polymeric composite : thermokinetic caracterization. ECCM 14 -14th European Conference on Composite Materials, Jun 2010, Budapest, Hungary. 11 p. ⟨hal-01764784⟩
  • Christophe Paris, Philippe Olivier, Gérard Bernhart. Modelling of the thermokinetic behaviour and the phases transitions of a carbon/polymeric composite submitted to high heating rate ramps. ESAFORM 2010 -13th International ESAFORM conference on material forming, Apr 2010, Brescia, Italy. 4 p. ⟨hal-01764785⟩
  • Mathieu Hautier, David Lévêque, Cédric Huchette, Philippe Olivier. Réparation des composites par infiltration de résine = Investigation of a composite repair method by liquid resin infiltration. JNC 16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00389232⟩
  • K. E. Tarsha Kurdi, M. H. Ibrahim, A. Alabdallah, Philippe Olivier. Étude expérimentale de l'effet de l'empilement sur les caractéristiques mécaniques des stratifiés (verre/polyester) = The effect of lamination method on mechanical properties of (glass / polyester) composite, Experimental study. JNC16, Jun 2009, Toulouse, France. 8 p. ⟨hal-00429749⟩
  • Arnaud Gillet, Philippe Olivier, Abir Al Maghribi, Ihab El Sawi. Prédiction des propriétés électrique d'un composite aéronautique = Prediction of electrical properties of an aeronautic composite. JNC16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00430577⟩
  • Ilhab Elsawi, Philippe Olivier, Philippe Demont, Christophe Laurent, Alain Peigney. Comportement rhéologique et cinétique d'une résine époxyde chargée de nanotubes de carbone double parois = Rheological and kinetic behavior of double-walled carbon nanotubes filled epoxy resin. JNC 16, Jun 2009, Toulouse, France. 9 p. ⟨hal-00393946⟩

Poster communications1 document

  • J. Bouillonnec, M. Pinault, M. Mayne-l'Hermite, Gérard Bernhart, Philippe Olivier, et al.. Composite materials prepared from vertically aligned carbon nanotubes: elaboration and properties. ChemOnTubes 2012 (Arcachon), 2012, Arcachon, France. 2012. ⟨hal-02185701⟩

Book sections1 document

  • Philippe Olivier, Matthieu Mulle, Christophe Paris, Francis Collombet. Carbon/polymeric composites autoclave cure monitoring with optical fiber bragg grating (FBG) sensors. Extrait de : Wiley encyclopedia of composites 2nd edition vol. 1 / sous la dir. de L. NICOLAIS et A. BORZACCHIELLO, Wiley, p.230-240, 2012, 978-0-470-27564-1. ⟨hal-01729117⟩

Directions of work or proceedings2 documents

  • Olivier de Almeida, Philippe Olivier. Mise en œuvre des composites à matrice thermoplastique. JST AMAC 2017 - Journées Scientifiques et Techniques de l'AMAC, Jan 2017, Toulouse, France. Revue des composites et des matériaux avancés, 28 (1), 134 p., 2018, Mise en oeuvre des composites à matrice thermoplastique. ⟨hal-01841374⟩
  • Philippe Olivier, Philippe Marguerès, Jean-José Orteu. Contrôles non destructifs et matériaux composites : journée scientifique et technique AMAC/COFREND. Journées scientifique et technique AMAC/COFREND, Jun 2006, Toulouse, France. Revue des composites et des matériaux avancés, 17 (2/2007), Lavoisier, pp. 143-260, 2007, 978-2-7462-1813-0. ⟨hal-01816511⟩