Mon cv

Johann Sence, William Feuray, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, et al.. Plastic and metal additive manufacturing technologies for microwave passive components up to Ka band. International Journal of Microwave and Wireless Technologies, Cambridge University Press/European Microwave Association 2018, pp.1 - 11. 〈10.1017/S1759078717001465〉. 〈hal-01777556〉

Etienne Laplanche, William Feuray, Johann Sence, Aurélien Perigaud, Olivier Tantot, et al.. Additive manufacturing of low cost and efficient microwave passive components. IET - Microwaves, Antennas & Propagation, 2017, 〈10.1049/iet-map.2017.0157 〉. 〈hal-01587168〉

Nicolas Jolly, Olivier Tantot, Aurélien Perigaud, Nicolas Delhote, Stéphane Bila, et al.. Conception et expérimentation de dispositifs microondes didactiques par impression 3D plastique. Journal sur l'enseignement des sciences et technologies de l'information et des systèmes, EDP Sciences, 2017, JPCNFM 2016 – 14e journées pédagogiques du CNFM (Coordination nationale pour la formation en micro-électronique et en nanotechnologies), 16, pp.1014. 〈10.1051/j3ea/20171014〉. 〈hal-01777560〉

Damien Di-Marco, Mohamed Khalil Drissi, Pierre-Marie Geffroy, Nicolas Delhote, Olivier Tantot, et al.. Dielectric properties of alumina doped with TiO2 from 13 to 73 GHz. Journal of the European Ceramic Society, Elsevier, 2017, Vol. 37 (Issue 2), pp. 641-646. 〈hal-01370506〉

Jamal Rammal, Farah Salameh, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, et al.. A microwave sensor for zinc corrosion detection. Journal of Applied Physics, American Institute of Physics, 2017, 122 (11), pp.114501. 〈10.1063/1.4993690〉. 〈hal-01614460〉

Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, Stéphane Bila, et al.. Continuously Tuned Ku-Band Cavity Filter Based on Dielectric Perturbers Made by Ceramic Additive Manufacturing for Space Applications. Proceedings of the IEEE, Institute of Electrical and Electronics Engineers, 2017, 105 (issue 4), pp.677-687. 〈10.1109/JPROC.2017.2663104〉. 〈hal-01504113〉

Jean-Michel Le Floch, Nicolas Delhote, Michel Aubourg, Valérie Madrangeas, Dominique Cros, et al.. Towards achieving strong coupling in 3D-cavity with solid state spin resonance. Journal of Applied Physics, American Institute of Physics, 2016, 119 (15), pp.153901 - 153909. 〈hal-01302952〉

José-Manuel Gonzales, Nicolas Delhote, Dominique Baillargeat, Steve Mcgarry, Langis Roy. Optically tunable filter based on meshed CdS-Polymer MIM capacitor. Microwave and Optical Technology Letters, Wiley, 2016. 〈hal-01302964〉

Damien Di-Marco, Mohamed Khalil Drissi, Nicolas Delhote, Olivier Tantot, Pierre-Marie Geffroy, et al.. Dielectric properties of pure alumina from 8 GHz to 73 GHz. Journal of the European Ceramic Society, Elsevier, 2016, 36 (14), pp.3355-3361. 〈hal-01357524〉

Thierry Chartier, Cyrielle Dupas, M. Lasgorceix, Joël Brie, Nicolas Delhote, et al.. Additive Manufacturing to Produce Complex 3D Ceramic Parts. Journal of Ceramic Science and Technology, 2014, 6 (2), pp.95-104. 〈http://www.ceramic-science.com/articles/all-articles.html?article_id=100364〉. 〈10.4416/JCST2014-00040〉. 〈hal-01278658〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Serge Verdeyme. Near-field microwave microscopy for the characterization of dielectric materials. International Journal of Microwave and Wireless Technologies, Cambridge University Press/European Microwave Association 2014, pp.1 - 6. 〈10.1017/S175907871400110X〉. 〈hal-01060283〉

José-Manuel Gonzales, Nicolas Delhote, Dominique Baillargeat, Corinne Champeaux, Langis Roy. Tunable 3D dielectric resonator using a thermoconductive VO2 material. Electronics Letters, IET, 2014, 50 (11), pp.821 - 823. 〈10.1049/el.2013.4090〉. 〈hal-01117007〉

Irina Khromova, Ramon Gonzalo, Inigo Ederra, Nicolas Delhote, Dominique Baillargeat, et al.. Subharmonic Mixer Based on EBG Technology. IEEE Transactions on Terahertz Science & Technology, 2013, 3 (6), pp.838 - 845. 〈10.1109/TTHZ.2013.2285671〉. 〈hal-01117014〉

Hassan Khalil, Damien Passerieux, Dominique Baillargeat, Nicolas Delhote, Serge Verdeyme, et al.. Quasi-Elliptic and Chebyshev Compact LTCC Multi-Pole Filters Functioning in the Submillimetric Wave Région at 150 GHz. IEEE Transactions on Microwave Theory and Techniques, Institute of Electrical and Electronics Engineers, 2010, 58 (12), pp.3925-3935. 〈hal-00584098〉

Inigo Ederra, Irina Khromova, Ramon Gonzalo, Nicolas Delhote, Dominique Baillargeat, et al.. Electromagnetic bandgap waveguide for the millimetre range. IEEE Transactions on Microwave Theory and Techniques, Institute of Electrical and Electronics Engineers, 2010, 58 (7), pp.1734-1741. 〈hal-00583674〉

Ngoc Tinh Nguyen, Mauro Ettorre, Nicolas Delhote, Dominique Baillargeat, Laurent Le Coq, et al.. Design and characterization of 60-GHz integrated lens antennas fabricated through ceramic stereolithography. IEEE Transactions on Antennas and Propagation, Institute of Electrical and Electronics Engineers, 2010, 58 (8), pp.2757-2762. 〈10.1109/TAP.2010.2050447〉. 〈hal-00506660〉

Thierry Chartier, C. Duterte, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, et al.. Ceramic stereo and microstereo lithography processes for the manufacturing of millimetre wave components. journal of Am. Ceram Soc, 2008, 91 (8), pp.2469-2474. 〈hal-00580439〉

Thierry Chartier, C. Duterte, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, et al.. Fabrication of Millimeter Wave Components Via Ceramic Stereo- and Microstereolithography Processes. Journal of the American Ceramic Society, Wiley, 2008, 91 (8), pp.2469-2474. 〈10.1111/j.1551-2916.2008.02482.x〉. 〈hal-00319940〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, C. Delage, C. Chaput. Ceramic Layer by layer stereolithographiy for the manufacturing of 3D millimeter wave filters.. IEEE Transactions on Microwave Theory and Techniques, Institute of Electrical and Electronics Engineers, 2007, VOL.55 (n°3), pp.548-554. 〈hal-00145355〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, C. Delage, C. Chaput.. Innovative shielded high Q dielectric resonator made of alumina by layer-by-layer stereolithography.. IEEE Microwave and Wireless Components Letters, Institute of Electrical and Electronics Engineers, 2007, vol.17 (n°6), pp.PP.433-435. 〈hal-00168850〉

Anthony Delage, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Barbara Bonnet, et al.. Caractérisation de la conductivité jusqu’à 67 GHz de lignes coplanaires imprimées par jet d’aérosol. Journées de Caractérisation Microondes et Matériaux (15ème JCMM), Mar 2018, Paris, France. 2018. 〈hal-01777583〉

Etienne Laplanche, Olivier Tantot, Aurélien Perigaud, Nicolas Delhote, Serge Verdeyme, et al.. 3D Printed Ku-Band Compact Diplexer. International Workshop on Microwave Filters (7th IWMF), Apr 2018, Noordwijk, Netherlands. 〈hal-01777589〉

Etienne Laplanche, Johann Sence, William Feuray, Aurélien Perigaud, Olivier Tantot, et al.. Plastic additive manufacturing for rapid and low-cost prototyping of passive hardware. International Workshop on Microwave Filters (7th IWMF), Apr 2018, Noordwijk, Netherlands. 〈hal-01777590〉

Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, Stéphane Bila, et al.. Bandpass Filter Based on Skeleton-like Monobloc Dielectric Pucks Made by Additive Manufacturing. European Microwave Conference (EuMW 2018), Sep 2018, Madrid, Spain. 〈hal-01778638〉

Etienne Laplanche, Anthony Delage, Ahmad Haidar, William Feuray, Johann Sence, et al.. Recent development in additive manufacturing of passive hardware and conformal printing. European Microwave Conference (EuMW 2018), Sep 2018, Madrid, Spain. 〈hal-01840933〉

Aurélien Perigaud, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Stéphane Bila, et al.. Continuously Tunable X-Band Filter Using a 3D Spiral Ribbon. Internationnal Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO 2018), Aug 2018, Reykjavik, Iceland. 〈hal-01840986〉

Nicolas Delhote, Dominique Baillargeat, Olivier Tantot, Aurélien Perigaud, Serge Verdeyme, et al.. Additive manufacturing applied to microwave filters and antennas up to 60 GHz. International Microwave Symposium (IMS 2018), Jun 2018, Philadelphia, United States. 〈hal-01840987〉

Anthony Delage, Nicolas Delhote, Serge Verdeyme, Barbara Bonnet, Ludovic Carpentier, et al.. Aerosol Jet Printing of Millimeter Wave Transmission Lines on 3D Ceramic Substrates Made by Additive Manufacturing. International Microwave Symposium (IMS 2018), Jun 2018, Philadelphia, United States. 〈hal-01840988〉

Etienne Laplanche, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, Bruno Barelaud, et al.. Coupleurs microondes en guide rectangulaire par impression 3D. journées pédagogiques du CNFM, Nov 2018, Saint-Malo, France. 〈hal-01922738〉

Cyrille Menudier, Marc Thévenot, Nicolas Delhote, Olivier Tantot, Maxime Romier, et al.. A Dielectric Resonator Antenna designed with a structured dielectric material. IEEE Conference on Antenna Measurements & Applications, Sep 2018, Vastears, Sweden. 〈hal-01922826〉

Aymen Abdelghani, Prince Bahoumina, Hamida Hallil, Stéphane Bila, Dominique Baillargeat, et al.. Capacitive microwave resonator printed on a paper substrate for CNT based gas sensor. International Microwave Symposium (IMS 2017), Jun 2017, Honolulu, United States. 〈http://ims2017.org/〉. 〈hal-01521575〉

Damien Di-Marco, Mohamed Khalil Drissi, Aurélien Perigaud, Pierre-Marie Geffroy, Olivier Tantot, et al.. Low loss substrate integrated filters made by laser micro-machining of alumina substrates. International Microwave Workshop Series on Advanced Materials and Processes, Sep 2017, Pavia, Italy. actes de la conérence. 〈hal-01579101〉

Cyrille Menudier, Marc Thévenot, Eric Arnaud, Thierry Monédière, Olivier Tantot, et al.. Additive manufacturing of microwave antennas up to 60 GHz. International Conference on ELECTROMAGNETICS IN ADVANCED APPLICATIONS, Sep 2017, Verona, Italy. Actes de la conférence. 〈hal-01579127〉

Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Stéphane Bila, Serge Verdeyme, et al.. Continuously Tunable Filter Made by Additive Manufacturing Using a 3D Spiral Ribbon. International Microwave Workshop Series on Advanced Materials and Processes, Sep 2017, Pavia, Italy. Actes de la conférence. 〈hal-01579104〉

Aurélien Perigaud, Ahmed Basti, Stéphane Bila, Nicolas Delhote, Dominique Baillargeat, et al.. Design of a Hybrid SIW–Microstrip Lossy Filter in LTCC Technology. International Microwave Workshop Series on Advanced Materials and Processes, Sep 2017, Pavia, Italy. Actes de la conférence. 〈hal-01579112〉

Etienne Laplanche, Olivier Tantot, Nicolas Delhote, Aurélien Perigaud, Serge Verdeyme, et al.. A Ku-Band diplexer based on 3dB directional couplers made by plastic additive manufacturing. European Microwave Conference, Oct 2017, Nuremberg, Germany. 〈hal-01504065〉

Johann Sence, William Feuray, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, et al.. Filtre elliptique 4 pôles par fabrication additive 3D plastique : problématique de la montée en fréquence. Journées Nationales Microondes, May 2017, Saint-Malo, France. 〈hal-01504062〉

William Feuray, Anthony Delage, Aymen Abdelghani, Johann Sence, Olivier Tantot, et al.. Evaluation de différents types de métallisation appliqués à et par fabrication additive. Journées Nationales Microondes, May 2017, Saint-Malo, France. 〈hal-01504063〉

William Feuray, Anthony Delage, Aymen Abdelghani, Johann Sence, Olivier Tantot, et al.. Evaluation of Metal Coating Techniques up to 66 GHz and their Application to Additively Manufactored Bandpass Filters. European Microwave Conference, Oct 2017, Nuremberg, Germany. 〈hal-01504067〉

Cyrille Menudier, Marc Thévenot, Laure Huitema, Eric Arnaud, Thierry Monédière, et al.. Innovative Materials and Fabrication Process to Develop New RF Components and Concepts. European Conference on Antennas and Propagation, Mar 2017, Paris, France. 〈hal-01504068〉

Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, Aurélien Perigaud, et al.. Panorama de composants hyperfréquences 3D réalisés par fabrication additive. Fabrication additive pour l’électronique, Jan 2016, Paris, France. 2016. 〈hal-01315661〉

Mohamed Khalil Drissi, Damien Di-Marco, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, et al.. Caractérisation de céramiques hautes performances . Journées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France. 〈https://conferences.univ-littoral.fr/indico/event/1/〉. 〈hal-01273923〉

William Feuray, Olivier Tantot, Eden Sorolla, Nicolas Delhote. Détermination Non Destructive de la Conductivité Electrique de Dépôts Conducteurs. Journées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France. 〈https://conferences.univ-littoral.fr/indico/event/1/〉. 〈hal-01273919〉

Maxime Gouré, Olivier Tantot, Nicolas Delhote, Nicolas Faure. Caractérisation basses fréquences de matériaux à faibles pertes diélectriques. Journées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France. 〈https://conferences.univ-littoral.fr/indico/event/1/〉. 〈hal-01273921〉

Johann Sence, Aurélien Perigaud, William Feuray, Olivier Tantot, Nicolas Delhote, et al.. Réalisation de dispositifs de filtrage passifs à l’aide de technologies de fabrication additive. Journées de Caractérisation Microondes et Matériaux, Mar 2016, Calais, France. 〈https://conferences.univ-littoral.fr/indico/event/1/〉. 〈hal-01273922〉

Nicolas Jolly, Olivier Tantot, Aurélien Perigaud, Nicolas Delhote, Stéphane Bila, et al.. Dispositifs microondes didactiques par impression 3D plastique. journées pédagogiques du CNFM, Nov 2016, Montpellier, France. 〈hal-01389905〉

Aurélien Perigaud, Umair Naeem, Stéphane Bila, Olivier Tantot, Nicolas Delhote, et al.. A Dual-mode Dual-band Bandpass Cavity Filter with Widely Separated Passbands. IEEE International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization for RF, Microwave and Terahertz Applications (NEMO), Jul 2016, Beijing, China. 〈hal-01389909〉

Aurélien Perigaud, Stéphane Bila, Olivier Tantot, Nicolas Delhote, Serge Verdeyme. 3D printing of microwave passive components by different additive manufacturing technologies. International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), Jun 2016, Chengdu, China. 〈hal-01389906〉

Aurélien Perigaud, Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, et al.. Tunable filters: solutions provided by mechanical actuation, dielectric components and additive manufacturing. 3rd ESA Workshop on Advanced Flexible Telecom Payloads , Mar 2016, Noordwijk, Netherlands. 〈https://artes.esa.int/news/3rd-esa-workshop-advanced-flexible-telecom-payloads〉. 〈hal-01278711〉

Jérémy Saucourt, Nicolas Jolly, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, et al.. Design of 3D Printed Plastic Modular Filters. European Microwave Conference, Oct 2016, London, United Kingdom. conference proceedings. 〈hal-01300638〉

Johann Sence, William Feuray, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, et al.. Plastic and Metal Additive Manufacturing Technologies for Hyperfrequency Passives Components up to Ka band. European Microwave Conference, Oct 2016, London, United Kingdom. conference proceedings. 〈hal-01300636〉

Mohamed Khalil Drissi, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, Damien Di-Marco, et al.. Microwave characterization of very low loss and temperature stable ceramics up to 73 GHz. ELECTROCERAMICS XV CONFERENCE, Jun 2016, Limoges, France. 〈hal-01300696〉

Malgorzata Anna Piechowiak, Nicolas Delhote, Carlos Alberto Paragua Macuri, Aymen Abdelghani, Kamel Frigui, et al.. Application of the Aerosol Jet® technology for printed electronic devices including ceramics. ELECTROCERAMICS XV CONFERENCE, Jun 2016, Limoges, France. 〈hal-01300738〉

Damien Di-Marco, Mohamed Khalil Drissi, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, et al.. Optimization of the dielectric properties of pure Alumina up to V band for telecommunication. International Workshop on Advanced Ceramics 07, Sep 2016, Limoges, France. 〈hal-01301229〉

Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, Dominique Baillargeat, et al.. Additive manufacturing of ceramics using Stereolithography. International Microwave Symposium, May 2016, San Fransisco, United States. 〈hal-01359800〉

Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Stéphane Bila, Serge Verdeyme. Ceramic, plastic and metallic additive manufacturing: perspectives for RF passive components. European Microwave Conference 2016, Oct 2016, Londres, United Kingdom. 〈hal-01359799〉

Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, Dominique Baillargeat, et al.. Application of ceramic additive technologies for radiofrequency components. Sigma-tech days – Additive manufacturing : a new way of thinking about objects design and fabrication, Jun 2015, Limoges, France. 〈hal-01281187〉

Mohamed Khalil Drissi, Damien Di-Marco, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, et al.. Filtre deux pôles en technologie de fabrication additive. Journées Nationales du Réseau Doctoral en Micro-nanoélectronique, May 2015, Bordeaux, France. 〈http://www.cnfm.fr/VersionFrancaise/animations/JNRDM/JNRDM2015.htm〉. 〈hal-01273904〉

Johann Sence, Aurélien Perigaud, Umair Naeem, Nicolas Jolly, William Feuray, et al.. Réalisation de prototypes de filtres volumiques par impression 3D plastique. Journées Nationales Microondes, Jun 2015, Bordeaux, France. 〈hal-01273907〉

Faten Kouki, Stéphane Bila, Marc Thévenot, Olivier Tantot, Nicolas Delhote, et al.. Antenne cornet réalisée en impression plastique 3D. Journées Nationales Microondes, Jun 2015, Bordeaux, France. 〈http://www.jnm2015.org/〉. 〈hal-01273916〉

Mohamed Khalil Drissi, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Damien Di-Marco, et al.. Q-band millimeter stereolithography filter . International Workshop on Microwave Filters, Mar 2015, Toulouse, France. 〈http://www.iwmf2015.com/〉. 〈hal-01273924〉

Mohamed Khalil Drissi, Damien Di-Marco, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, et al.. Filtre millimétrique bande Q pour des applications satellites. Journées Nationales Microondes, Jun 2015, Bordeaux, France. 〈http://www.jnm2015.org/〉. 〈hal-01273911〉

Mohamed Khalil Drissi, Damien Di-Marco, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, et al.. Optimisation de la technique de caractérisation par cavité métallique. Journées Nationales Microondes, Jun 2015, Bordeaux, France. 〈http://www.jnm2015.org/〉. 〈hal-01273910〉

Nicolas Jolly, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, et al.. Filtres accordables en plan E avec accord mécanique . Journées Nationales Microondes, Jun 2015, Bordeaux, France. 〈http://www.jnm2015.org/〉. 〈hal-01273913〉

Mohamed Khalil Drissi, Damien Di-Marco, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, et al.. Caractérisation de céramiques hautes performances par cavité métallique . Colloque francophone PLUMEE 2015, Jun 2015, Limoges, France. 〈hal-01273918〉

Nicolas Jolly, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, et al.. E-plane tunable filters with mechanical actuation. International Workshop on Microwave Filters, Mar 2015, Toulouse, France. 〈http://www.iwmf2015.com/〉. 〈hal-01273926〉

Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, Dominique Baillargeat, et al.. Technologies additives et les nouveaux matériaux pour les antennes et les circuits en 3D. Assemblée générale 2015 du DGR Ondes, Oct 2015, Lyon, France. 〈hal-01280482〉

Dominique Baillargeat, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Stéphane Bila, et al.. Ceramic-based additive technologies for RF applications. European Microwave Week, Special session on Additive manufacturing techniques for RF modules, 2015, Paris, France. 〈hal-01302133〉

Faten Kouki, Marc Thévenot, Stéphane Bila, Nicolas Delhote, Serge Verdeyme, et al.. Miniature ceramic filters for wireless communications front-ends at 60 GHz. International Workshop on Microwave Filters , 2015, Toulouse, France. 〈hal-01302180〉

Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, Dominique Baillargeat, et al.. INTÉGRATION DES TECHNOLOGIES ADDITIVES DANS UNE CHAÎNE NUMÉRIQUE DE CRÉATION DE COMPOSANTS HYPERFRÉQUENCES. GdR Ondes - Thales - Journée applications des technologies de fabrication additive aux antennes et circuits hyperfréquences, Nov 2015, Elancourt, France. 〈hal-01280498〉

Aurélien Perigaud, Nicolas Jolly, Nicolas Delhote, Stéphane Bila, Serge Verdeyme, et al.. Tunable filters by mechanical actuation. European Microwave Week, Sep 2015, Paris, France. 2015, 〈http://www.eumweek.com/〉. 〈hal-01280474〉

Petropoulos Ioannis, Jacques Sombrin, Nicolas Delhote, Cyrille Menudier. Channel capacity estimation of stacked circularly polarized patch antennas suitable for drone applications. European Test and Telemetry Conference (ETTC), Jun 2015, Toulouse, France. 〈hal-01226022〉

Petropoulos Ioannis, Jacques Sombrin, Nicolas Delhote, Cyrille Menudier. Stacked Patch Antennas Appropriate for Remotely Piloted Aircraft Applications. Loughborough Antennas & Propagation Conference, Nov 2015, Loughborough, United Kingdom. Proceedings of Loughborough Antennas & Propagation Conference 2015. 〈hal-01226017〉

Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Stéphane Bila, Dominique Baillargeat, et al.. RF Components Based on Advanced Additive Technologies. 1st International Conference on Progress in Additive Manufacturing, May 2014, Singapour, Singapore. 〈http://rpsonline.com.sg/proceedings/9789810904456/html/sess5.html〉. 〈10.3850/978-981-09-0446-3_082〉. 〈hal-01281365〉

Jamal Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, François GallÉe, et al.. New Passive Ceramic Sensor for Corrosion Detection. European Microwave Conference, Oct 2014, Rome, Italy. 2014. 〈hal-00977977〉

Faten Kouki, Marc Thévenot, Stéphane Bila, Nicolas Delhote, Thierry Monédière, et al.. Miniature ceramic filter-antenna for wireless communications systems at 60 GHz. European Microwave Week , 2014, Rome, Italy. 〈hal-01302164〉

Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, Dominique Baillargeat, et al.. Inkjet printing and additive technologies for the fabrication of RF components. International Microwave Symposium, Jun 2014, Tampa, United States. 〈hal-01117026〉

Aurélien Perigaud, Nicolas Delhote, Stéphane Bila, Serge Verdeyme, Olivier Tantot, et al.. RF Components by Ceramic Additive Technologies: Examples, Fabrication Rules and Optimization Tools. Workshop on Additive Manufacturing technologies for space applications, Oct 2014, Noordwijk, Netherlands. 〈hal-01117032〉

Nicolas Delhote, Marchives Yoann, Serge Verdeyme, Petronilo Martin Iglesias. Wide-band dielectric filter at C-band manufactured by stereolithography. European Microwave Conference, Oct 2014, Rome, Italy. 2014. 〈hal-01117001〉

Aurélien Périgaud, Nicolas Delhote, Yves Mancuso, Patrick Garrec. Compact reconfigurable ceramic filter based on combline type 3-D resonators. Radar 2014, Oct 2014, Lille, France. 〈hal-01117040〉

Marchives Yoann, Nicolas Delhote, Serge Verdeyme, Petronilo Martin Iglesias, Cesar Miquel Espana, et al.. Wide bandwidth ceramic filter by stereolithography. Micro- and Millimetre Wave Technology and Techniques Workshop, Nov 2014, Noordwijk, Netherlands. 〈hal-01117042〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Serge Verdeyme. Wideband Characterization of Dielectric Material by New Approaches Based on Near Field Microwave Microscopy. European Microwave Conference, Oct 2014, Rome, Italy. 2014. 〈hal-00977970〉

Jamal Rammal, Olivier Tantot, Damien Passerieux, Nicolas Delhote, Serge Verdeyme. Monitoring of Electromagnetic Characteristics of Split Cylinder Resonator and Dielectric Material for Temperature Caraterization. European Microwave Conference, Oct 2014, Rome, Italy. 2014. 〈hal-00977976〉

Nicolas Jolly, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, Laetitia Estagerie, et al.. Wide Range Continuously High Electrical Perfomance Tunable E-Plane Filter by Mechanical Translation. European Microwave Conference, Oct 2014, Rome, Italy. 2014. 〈hal-00977978〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Serge Verdeyme. Caractérisation Large Bande de Matériaux Diélectriques par une Technique en Champ Proche. Journées de Caractérisation Microondes et Matériaux (13èmes JCMM), Mar 2014, Nantes, France. pp._, 2014. 〈hal-00929777〉

Jamal Rammal, Olivier Tantot, Damien Passerieux, Nicolas Delhote, Serge Verdeyme. Monitorage Electromagnétique des Caractéristiques de Cavité Fendue et de Matériau Diélectrique pour la Caractérisation en Température. Journées de Caractérisation Microondes et Matériaux (13èmes JCMM), Mar 2014, Nantes, France. pp._, 2014. 〈hal-00929779〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Aurélien Perigaud, Serge Verdeyme. Résonateur Hairpin Accordable pour l'Extraction de Modèle de Diode Varactor. Journées Nationales Microondes (18èmes JNM), May 2013, Paris, France. 2013. 〈hal-00915930〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Christelle Dossou Yovo, et al.. Technologie Jet d'Encre Multi Matériaux pour la Fabrication de Composants Microondes. Journées Nationales Microondes (18èmes JNM), May 2013, Paris, France. 2013. 〈hal-00915921〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Damien Passerieux, Serge Verdeyme. Caractérisation et imagerie microondes de matériaux de faible volume dans la bande ISM. Journées Nationales Microondes (18èmes JNM), May 2013, Paris, France. 2013. 〈hal-00915935〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Christelle Dossou Yovo, et al.. Multimaterial Inkjet Technology. Journées Nationales sur les Technologies Emergentes en micro-nanofabrication, May 2013, Evian, France. 2013. 〈hal-00915968〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Serge Verdeyme. Non-Destructive Characterisation of Dielectric Layer Printed by Inkjet Technology. Journées Nationales sur les Technologies Emergentes en micro-nanofabrication, May 2013, Evian, France. 2013. 〈hal-00915949〉

Faten Kouki, Stéphane Bila, Marc Thévenot, Nicolas Delhote. Conception et intégration sur céramique d’une structure filtre-antenne pour les communications haut-débit à 60GHz. Assemblée générale du GdR Ondes, 2013, Dijon, France. 〈hal-01349577〉

Nicolas Delhote, Stéphane Bila, Olivier Tantot, Serge Verdeyme, Aurélien Perigaud, et al.. Utilisation de technologies additives céramique pour des applications de télécommunications. Animation fabrication additive, Nov 2013, Toulouse, France. 〈http://cct.cnes.fr/content/animation-fabrication-additive〉. 〈hal-01280493〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Serge Verdeyme, Michel Aubourg. Microwave Characterization of Low volume Materials in the ISM Band. European Microwave Conference, Oct 2013, Nuremberg, Germany. 2013. 〈hal-00908184〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Christelle Dossou Yovo, et al.. Multimaterial Inkjet Technology for the Fabrication of Microwave Components. European Microwave Conference (EuMC 2013), Oct 2013, Nuremberg, Germany. 2013. 〈hal-00916012〉

Faten Kouki, Stéphane Bila, Marc Thévenot, Nicolas Delhote, Thierry Monédière, et al.. Conception et intégration sur céramique d'une structure filtre-antenne pour les communications haut-débit à 60 GHZ. JNM 2013, 18ème Journées Nationales Microondes, May 2013, PARIS, France. 2013. 〈hal-00916000〉

Jamal Rammal, Olivier Tantot, Nicolas Delhote, Serge Verdeyme. Non-Contact Imaging Of Dielectric Constant With A Near-Field Scanning Microwave Microscope. Mediterranean Microwave Symposium (13ème MMS), Sep 2013, Saida, Lebanon. 2013. 〈hal-00916003〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Jamal Rammal, et al.. Multimaterial Inkjet Technology for The Fabrication of Multilayer Components. Mediterranean Microwave Symposium (13ème MMS), Sep 2013, Saida, Lebanon. 2013. 〈hal-00916008〉

Ludovic Carpentier, Nicolas Delhote, Serge Verdeyme, Hervé Leblond, Damien Pacaud. Compact Ku band filter based on BMT dielectric resonators made in a single part using 3D ceramic stereolithography process. International Microwave Symposium, Jun 2012, Montreal, Canada. 〈10.1109/MWSYM.2012.6258414〉. 〈hal-01117018〉

Nicolas Delhote, Dominique Baillargeat, Stéphane Bila, Serge Verdeyme, Aurélien Perigaud. Technologies for the design of compact high frequencies filters. Workshop on Technical and Technological Solutions for the Design of Miniaturized Filters and Multiplexers European Microwave Week / European Microwave Conference (EuMW / EuMC 12), Oct 2012, Amsterdam, Netherlands. 〈hal-00924881〉

Hussain Alaaeddine, Olivier Tantot, Nicolas Delhote, Damien Passerieux, Serge Verdeyme. Resonance of Stacked Rings in LTCC Technology for Non-Destructive Characterisation Sensor at 150 GHz. European Microwave Conference (EuMC 2012), Oct 2012, Amsterdam, Netherlands. 2012. 〈hal-00915993〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme, Rémi Noguera, et al.. Multimaterial Inkjet Technology for The Fabrication of Microwave Components. CNES International Workshop on Microwave Filter, Oct 2012, Toulouse, France. 2012. 〈hal-00915985〉

Lidwine Raynaud, Cécile Caille, Hervé Leblond, Adonis Bikiny, Jean-Louis Cazaux, et al.. Presentation of different technologies of X-band filters for frequency converters application. IEEE 5th International Workshop on Microwave Filters, IWMF 2012, CNES-ESA, Oct 2012, Toulouse, France. pp 13-16, 2012. 〈hal-00855350〉

Marc Thévenot, Stéphane Bila, Nicolas Delhote, Serge Verdeyme, Thierry Monédière, et al.. Co-conception et Co-intégration technologique : Quelques exemples de filtres-antennes. Atelier " Co-intégration et co-conception de dispositifs RF et hyperfréquences " - Centre de compétence technique "Electromagnétisme et circuits microondes" (CCT ECM) du CNES et groupe thématique "Antennes et circuits" (GT4) du GDR Ondes, May 2012, Toulouse, France. pp.Inconnu, 2012. 〈hal-00782335〉

Faten Kouki, Marc Thévenot, Nicolas Delhote, Stéphane Bila, Thierry Chartier, et al.. Miniature ceramic horn antenna for a high data rates wireless communications systems at 60GHz. Oral Session 3.1: "Horn Antennas" - Tue.26 June -Toulouse Space Show'12 - International Week on Space Applications - ANTEM 2012, Jun 2012, Toulouse, France. pp.1-4, 2012, 〈10.1109/ANTEM.2012.6262388〉. 〈hal-00780505〉

José-Manuel Gonzales, Nicolas Delhote, Dominique Baillargeat, Nathan Jess, Langis Roy, et al.. A new optically controlled CDS-polymer capacitor for tunable microwave components. EuMW 2011, Manchester European Microwave Week 2011, Manchester Central, Oct 2011, Manshester, United Kingdom. pp.960 - 963, 2011. 〈hal-00684729〉

José-Manuel Gonzales, Nicolas Delhote, Dominique Baillargeat, Nathan Jess, Langis Roy, et al.. Zero-bias optically controlled RF switch in 0.13µm CMOS technologyts. Microwave Photonics, 2011 International Topical Meeting on & Microwave Photonics Conference, 2011 Asia-Pacific, Oct 2011, Singapour, Singapore. pp.441-444, 2011, 〈10.1109/MWP.2011.6088766〉. 〈hal-00684804〉

Hussain Alaaeddine, Olivier Tantot, Nicolas Delhote, Damien Passerieux, Serge Verdeyme. Résonateur volumique en anneaux en technologie LTCC : caractérisation et capteur non destructif à 150 GHz. 17èmes Journées Nationales Microondes, JNM 2011, May 2011, Brest, France. Présentation Orale - Session 4-B3 - Papier n°115, 2011. 〈hal-00684904〉

Rim Rammal, Nicolas Delhote, Olivier Tantot, Serge Verdeyme. Résonateur diélectrique en technologies stéréolithographie et jet d'encre. 17èmes Journées Nationales Microondes, JNM 2011, Brest, May 2011, Brest, France. Présentation orale Sesion 2B-3 - Papier n°33, 2011. 〈hal-00684913〉

Dominique Baillargeat, José-Manuel Gonzales, Nicolas Delhote, Langis Roy, Steve Mcgarry. Zero-bias optically controlled RF switch in 0.13 µm CMOS technology. Microwave Photonics, 2011 International Topical Meeting on & Microwave Photonics Conference, 2011 Asia-Pacific, MWP/APMP, Oct 2011, Singapore. pp.441-444, 2011. 〈hal-00922464〉

Ludovic Carpentier, Nicolas Delhote, Serge Verdeyme, Laetitia Estagerie, Hervé Leblond. Résonateurs céramiques 3D originaux et à fort facteur de qualité à vide par procédé de stéréolithographie. 17èmes Journées Nationales Microondes, JNM 2011, May 2011, Brest, France. Présentation poster - Session 7F-3 - Papier n°101, 2011. 〈hal-00686427〉

Ludovic Carpentier, Nicolas Delhote, Serge Verdeyme, Laetitia Estagerie, Hervé Leblond. Composants céramiques 3D par procédé de stéréolithographie. GDR Ondes, 24-26 Octobre 2011, Campus de Saint Jean d'Angély, Oct 2011, Nice, France. 〈hal-00686588〉

Ali Khalil, Nicolas Delhote, Sébastien Pacchini, Jérôme Claus, Dominique Baillargeat, et al.. 3-D pyramidal and collective Ku band pass filters made in alumina by ceramic stereolithography. IEEE MTT-S, IMS 2011, Jun 2011, Baltimore, United States. pp.1-4, 2011, 〈10.1109/MWSYM.2011.5972716〉. 〈hal-00683584〉

Ali Khalil, Damien Passerieux, Dominique Baillargeat, Nicolas Delhote, Serge Verdeyme, et al.. Quasi-elliptic 150 GHz highly selective LTCC filter. IEEE MTT-S International Microwave Symposium Digest, IMS 2010, May 2010, Anaheim - Californie, United States. pp.896 - 899, 2010, 〈10.1109/MWSYM.2010.5517621〉. 〈hal-00619008〉

Stéphane Bila, Michel Aubourg, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme. An overwiew on EM-based computer-aided design techniques for microwave devices. International Workshop on Advances in modeling and Optimization of High Frequency Structures, Aug 2010, Reykjavik, Ireland. 2010. 〈hal-00620903〉

Nicolas Delhote, Matthieu Chatras, Dominique Baillargeat, Serge Verdeyme. Ku-band filter based on low loss alumina octogonal dielectric resonators made by 3D ceramic stereolithography size. European Microwave Conference, EuMW 2009, Sep 2009, Rome, Italy. pp.Poster 02-39, 2009. 〈hal-00438431〉

Nicolas Delhote, Ronan Sauleau. Technologie LTCC et stéréolithographie 3D céramique dédiées à la réalisation de composants hyperfréquences. Présentation orale, Groupe thématique 4 "Antennes et circuits" du GDR Ondes, Jun 2009, Paris, France. 〈hal-00408465〉

Ali Khalil, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Laëtitia Rigaudeau, et al.. Réalisation de filtres hyperfréquences par les technologies LTCC et stéréolithographie 3D Céramique. 9èmes éditions des Journées CNES Jeunes Chercheurs, JC², Oct 2009, Toulouse, France. 2009. 〈hal-00437340〉

Ali Khalil, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Laëtitia Rigaudeau, et al.. Conception et fabrication 3D de filtres millimétriques et submillimétriques en céramique. Réunion Plénière GDR Ondes, Nov 2009, Paris, France. 〈hal-00437342〉

Ali Khalil, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Laëtitia Rigaudeau, et al.. 3D LTCC and stereolithography technologies for fabrication of compact microwave filters. International Workshop on Microwave Filters, Nov 2009, Toulouse, France. 2009. 〈hal-00437344〉

Ali Khalil, Nicolas Delhote, Arnaud Pothier, Annie Bessaudou, Dominique Baillargeat, et al.. Compact low loss alumina band-pass filter in Ku band using layer-by-layer stereolithography technology. International Microwave Symposium, IMS 2009, Jun 2009, Boston, United States. 2009. 〈hal-00437284〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Cyrille Delage, Christophe Chaput. Résonateur à fort facteur de qualité fabriqué en céramique faibles pertes par stéréolithographie 3D. 16èmes Journées Nationales Microondes (JNM 2009), May 2009, Grenoble, France. pp.6B-5 Session Orale, 2009. 〈hal-00436600〉

Ngoc Tinh Nguyen, Nicolas Delhote, Ronan Sauleau, Dominique Baillargeat, Laurent Le Coq, et al.. Application de la stéréolithographie pour la fabrication d'antennes lentilles intégrées à 60 GHz. 16èmes Journées Nationales Microondes, May 2009, Grenoble, France. pp.6E-2 Session Affiche, 2009. 〈hal-00408458〉

Ngoc Tinh Nguyen, Nicolas Delhote, Ronan Sauleau, Laurent Le Coq, Dominique Baillargeat. Layer-to-layer ceramic stereolithography for the design of extended hemispherical lenses in at 60 GHz. Asia Pacific Microwave Conference'08, APMC'2008, Dec 2008, Hong Kong, China. 2008. 〈hal-00355199〉

Hassan Khalil, Nicolas Delhote, Stéphane Bila, Michel Aubourg, Serge Verdeyme, et al.. Topology optimization applied to the design of a dual-mode filter including a dielectric resonator. International Microwave Symposium, Jun 2008, Atlanta, United States. IEEE Publications, pp.1381-1384, 2008, IEEE MTT-S International Microwave Symposium Digest. 〈10.1109/MWSYM.2008.4633035〉. 〈hal-00378184〉

Hassan Khalil, Nicolas Delhote, Dominique Baillargeat, Stéphane Bila, Michel Aubourg, et al.. Advanced design and Manufacturing of microwave components based on shape optimization and ceramic stereolithography process.. IEEE MTT-S International Microwave Workshop Series (IMWS) on Art of Miniaturizing and Microwave Passive Components, Dec 2008, Chengdu, China. 〈hal-00349201〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, C. Delage, C. Chaput, et al.. Application de la stéréolithographie céramique 3D aux structures périodiques.. 10èmes Journées de Caractérisation Microondes et Matériaux, JCMM 2008, Apr 2008, LIMOGES, France. pp.Session Orale 1 : 01-1, 2008. 〈hal-00358843〉

Hassan Khalil, Dominique Baillargeat, Nicolas Delhote, Stéphane Bila, Michel Aubourg, et al.. Shape optimization design and ceramic stereo-lithography process dedicated to microwave component manufacturing.. 2008 Asia-Pacific Microwave Conference, Dec 2008, Hong-Kong, China. pp.INCONNU, 2008. 〈hal-00358597〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, C. Delage, C. Chaput. Millimeter wave devices based on a 3D electromagnetic band gap crystal manufactured by layer-by-layer ceramic stereolithography.. European Microwave Week 2008 (EuMW), Oct 2008, Amsterdam, Netherlands. pp.EuMC29-2, 2008. 〈hal-00358589〉

Nicolas Delhote, Hassan Khalil, Dominique Baillargeat, Michel Aubourg, Stéphane Bila, et al.. Advanced design of microwave components using shape optimisation and ceramic stereolithography. Microwave Technology and Techniques Workshop, MTTW 2008, May 2008, Noordwijk, Netherlands. pp.INCONNU, 2008. 〈hal-00358090〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Marc Thévenot, C. Delage, et al.. Large experimental bandpass waveguide in 3D EBG woodpile manufactured by layer-by-layer ceramic stereolithography. IMS 2007, Jun 2007, HONOLULU, United States. IEEE, Poster, Paper ID : TH1G-05, 2007. 〈hal-00156829〉

C. Duterte, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Younes Abouliatim, et al.. Micro stéréolithographie céramique 3D appliquée à la fabrication de composants sub-millimétriques. XVèmes Journées Nationales Micro-Ondes, May 2007, Toulouse, France. 〈hal-00285917〉

C. Duterte, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Younes Abouliatim, et al.. 3D ceramic microstereolithography applied to sub-millimeter devices manufacturing. European Microwave Week 2007 (EuMC 2007), Oct 2007, Munich, Germany. pp.814-817, 2007. 〈hal-00283711〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, C. Delage, C. Chaput, et al.. Electromagnetic band gap millimetre and sub-millimetre 3D resonators manufactured by ceramic stereolithography. IEEE Asia Pacific Microwave Conference Digest, Dec 2007, Bangkok, Thailand. IEEE Publications, pp.2192-2195, 2007, Asia Pacific Microwave Conference-Proceedings. 〈10.1109/APMC.2007.4555081〉. 〈hal-00287600〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Marc Thévenot, C. Delage, et al.. Procédé de fabrication de composants céramiques par stéréo-lithographie 3D.. XVèmes Journées Nationales Microondes, JNM 2007., May 2007, TOULOUSE, France. 〈hal-00199468〉

C. Duterte, Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Younes Abouliatim, et al.. Micro stéréolithographie céramique 3D appliquée à la fabrication de composants sub-millimétriques.. XVèmes Journées Nationales Microondes, JNM 2007., May 2007, TOULOUSE, France. 〈hal-00199476〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Marc Thévenot, C. Delage, et al.. Procédé de fabrication de composantes céramiques par stéréo-lithographies 3D. 15ème Journées Nationales Micro-ondes, May 2007, TOULOUSE, France. INCONNU, pp.session Poster5E5, 2007. 〈hal-00158034〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, C. Delage, C. Chaput. Narrow Ka bandpass filter made of high permittivity ceramic by layer-by-layer polymer stereolithography.. European Microwave Conference, EuMC/EuMW 06, Sep 2006, Manchester, United Kingdom. EMA European Microwave Association, pp.INCONNU, 2006. 〈hal-00154412〉

Nicolas Delhote, Dominique Baillargeat, Serge Verdeyme, Marc Thévenot. Analyses théoriques de structures périodiques "Tas de bois" - applications à la conception de dispositifs millimétriques et submillimétriques. GDR ondes, GT2, Supelec, Jun 2006, Orsay, France. 2006. 〈hal-00134128〉

Nicolas Delhote, Stéphane Bila, Dominique Baillargeat, Thierry Chartier, Serge Verdeyme. Advanced design and fabrication of microwave components based on shape optimization and 3D ceramic stereolithography process. C. Sikalidis. Advances in Ceramics - Synthesis and Characterization, Processing and Specific Applications, InTech, pp.243-276, 2011. 〈hal-00677545〉

Nicolas Jolly, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Stéphane Bila, et al.. Bandpass microwave filter tunable by rotation of a dielectric element. United States, Patent n° : EP2887451. 2015. 〈hal-00946986〉

Hussein Ezzeddine, Aurélien Perigaud, Olivier Tantot, Nicolas Delhote, Stéphane Bila, et al.. Filtre hyperfréquence passe bande accordable par rotation relative d'une section d'insert et d'un élément diélectrique. France, N° de brevet: EP2887450. 2015. 〈hal-00946994〉

Aurélien Perigaud, Damien Pacaud, Nicolas Delhote, Olivier Tantot, Stéphane Bila, et al.. Frequency-tunable band-pass filter for microwave. France, Patent n° : EP2690703. 2014. 〈hal-00946974〉

Aurélien Perigaud, Damien Pacaud, Nicolas Delhote, Olivier Tantot, Stéphane Bila, et al.. Frequency-tunable filter with dielectric resonator. France, Patent n° : EP2690702. 2014. 〈hal-00946978〉

Nicolas Delhote. Composants céramiques 3D par procédé de stéréolithographie. Solutions de filtrage hyperfréquence innovantes.. Thèse Université de Limoges. 2007. 〈hal-00181776〉