Mathilde Rieu

Documents

Publications

	From the Modeling of an Electrochemical YSZ-Based Gas Sensor Used in Electrolysis Mode Riadh Lakhmi , Jean-Paul Viricelle , Rouba Alrammouz , Mathilde Rieu Sensors, 2024, 24 (2), pp.658. ⟨10.3390/s24020658⟩ Article dans une revue emse-04409438v1
	Protection of NOx Sensors from Sulfur Poisoning in Glass Furnaces by the Optimization of a “SO₂ Trap” Carole Naddour , Mathilde Rieu , A. Boreave , S. Gil , P. Vernoux Sensors, 2023, 23 (19), pp.8186. ⟨10.3390/s23198186⟩ Article dans une revue emse-04233545v1
	Rational Development of IT-SOFC Electrodes Based on the Nanofunctionalization of La_0.6Sr_0.4Ga_0.3Fe_0.7O₃ with Oxides. Part 2: Anodes by Means of Manganite Oxide Jonathan Cavazzani , Andrea Bedon , Giovanni Carollo , Mathilde Rieu , Jean-Paul Viricelle ACS Applied Energy Materials, inPress, ⟨10.1021/acsaem.2c02592⟩ Article dans une revue emse-03922392v1
	Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing Omar Kassem , Vincent Barnier , Mohamed Nasreldin , Jawad Reslan , Asdin Aoufi ACS Applied Materials & Interfaces, inPress, 15 (25), pp.30663 à 30673. ⟨10.1021/acsami.3c05015⟩ Article dans une revue emse-04136799v1
	Development of a selective ammonia YSZ-based sensor and modeling of its response Gita Nematbakhsh Abkenar , Mathilde Rieu , Philippe Breuil , Jean-Paul Viricelle Sensors and Actuators B: Chemical, 2021, 338, pp.129833. ⟨10.1016/j.snb.2021.129833⟩ Article dans une revue emse-03192932v1
	Single chamber Solid Oxide Fuel Cells selective electrodes: A real chance with brownmillerite-based nanocomposites Andrea Bedon , Jean-Paul Viricelle , Mathilde Rieu , Simone Mascotto , Antonella Glisenti International Journal of Hydrogen Energy, 2021, 46 (27), pp.14735-14747. ⟨10.1016/j.ijhydene.2021.01.220⟩ Article dans une revue emse-03164274v1
	Catalytic and Electrochemical Properties of Ag Infiltrated Perovskite Coatings for Propene Deep Oxidation Thai Giang Truong , Benjamin Rotonnelli , Mathilde Rieu , Jean-Paul Viricelle , Ioanna Kalaitzidou Catalysts, 2020, 10 (7), pp.729. ⟨10.3390/catal10070729⟩ Article dans une revue emse-02892067v1
	Ethylene epoxidation on Ag/YSZ electrochemical catalysts: Understanding of oxygen electrode reactions Thomas Cavoué , A. Caravaca , Ioanna Kalaitzidou , F. Gaillard , Mathilde Rieu Electrochemistry Communications, 2019, 105, pp.106495. ⟨10.1016/j.elecom.2019.106495⟩ Article dans une revue hal-02184495v1
	A novel approach of a fully inkjet printed SnO₂-based gas sensor on a flexible foil Omar Kassem , Mohamed Saadaoui , Mathilde Rieu , Jean-Paul Viricelle Journal of Materials Chemistry C, 2019, 7 (39), pp.12343 à 12353. ⟨10.1039/C9TC04170B⟩ Article dans une revue hal-02304842v1
	Simulation of nanosecond IR laser annealing of cerium gadolinium oxide Mariana Mariño , Philippe Breuil , Mathilde Rieu , D. Jamon , Jean-Michel Rampnoux Journal of the European Ceramic Society, 2018, 38 (11), pp.3875 - 3880. ⟨10.1016/j.jeurceramsoc.2018.04.035⟩ Article dans une revue hal-01791450v1
	Synthesis and inkjet printing of sol–gel derived tin oxide ink for flexible gas sensing application Omar Kassem , Mohamed Saadaoui , Mathilde Rieu , Sergio Sao-Joao , Jean-Paul Viricelle Journal of Materials Science, 2018, 53 (18), pp.12750 à 12761. ⟨10.1007/s10853-018-2577-9⟩ Article dans une revue hal-01823815v1
	Rational Development of IT-SOFC Electrodes Based on the Nanofunctionalization of La_0.6Sr_0.4Ga_0.3Fe_0.7O₃ with Oxides. PART 1: Cathodes by Means of Iron Oxide Andrea Bedon , Mathilde Rieu , Jean-Paul Viricelle , Antonella Glisenti ACS Applied Energy Materials, 2018, 1 (12), pp.6840-6850. ⟨10.1021/acsaem.8b01124⟩ Article dans une revue hal-01931372v1
	Electrochemical promotion of propylene combustion on Ag catalytic coatings I. Kalaitzidou , T. Cavoue , A. Boreave , L. Burel , F. Gaillard Catalysis Communications, 2018, 104 (---), pp.28-31. ⟨10.1016/j.catcom.2017.10.005⟩ Article dans une revue hal-01705341v1
	Ambient temperature selective ammonia gas sensor based on SnO₂-APTES modifications Mohamad Hijazi , Mathilde Rieu , Valérie Stambouli , Guy Tournier , Jean-Paul Viricelle Sensors and Actuators B: Chemical, 2018, 256, pp.440-447. ⟨10.1016/j.snb.2017.10.036⟩ Article dans une revue hal-01618268v1
	Synthesis and characterization of tin dioxide thick film modified by APTES in vapor and liquid phases Mohamad Hijazi , Valérie Stambouli , Mathilde Rieu , Vincent Barnier , Guy Tournier Journal of Materials Science, 2018, Electronic materials, 53 (1), pp.727-738. ⟨10.1007/s10853-017-1541-4⟩ Article dans une revue hal-01586224v1
	Electrochemical Removal of NO_x on Ceria-Based Catalyst-Electrodes Xi Wang , Alexandre Westermann , Yi Xiang Shi , Ning Sheng Cai , Mathilde Rieu Catalysts, 2017, 7 (2), pp.61. ⟨10.3390/catal7020061⟩ Article dans une revue hal-01473456v1
	Selective Ammonia Gas Sensor based on SnO 2 -APTES Modification M. Hijazi , M. Rieu , V. Stambouli , G. Tournier , J-P. Viricelle Procedia Engineering, 2016, 168, pp.280-283 Article dans une revue hal-02012993v1
	Fully inkjet printed SnO₂ gas sensor on plastic substrate Mathilde Rieu , Malick Camara , Guy Tournier , Jean-Paul Viricelle , Christophe Pijolat Sensors and Actuators B: Chemical, 2016, 236, pp.1091-1097. ⟨10.1016/j.snb.2016.06.042⟩ Article dans une revue hal-01330977v1
	Laser induced densification of cerium gadolinium oxide: application to single-chamber solid oxide fuel cells Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie Applied Surface Science, 2016, 374, pp.370-374. ⟨10.1016/j.apsusc.2015.12.220⟩ Article dans une revue hal-01250246v1
	Fabrication and characterization of anode-supported single chamber solid oxide fuel cell based on La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ-Ce_0.9Gd_0.1O_1.95 composite cathode Li-Ping Sun , Mathilde Rieu , Jean-Paul Viricelle , Christophe Pijolat , Hui Zhao International Journal of Hydrogen Energy, 2014, 39 (2), pp.1014-1022. ⟨10.1016/j.ijhydene.2013.10.117⟩ Article dans une revue hal-00918061v1
	Anode supported single chamber solid oxide fuel cells operating in exhaust gases of thermal engine Pauline Briault , Mathilde Rieu , Richard Laucournet , Bertrand Morel , Jean-Paul Viricelle Journal of Power Sources, 2014, 268, pp.356-364. ⟨10.1016/j.jpowsour.2014.06.061⟩ Article dans une revue hal-01056363v1
	Tunable architecture for flexible and highly conductive graphene-polymer composites Amélie Noël , Jenny Faucheu , Mathilde Rieu , Jean-Paul Viricelle , Elodie Bourgeat-Lami Composites Science and Technology, 2014, 95, pp.82-88. ⟨10.1016/j.compscitech.2014.02.013⟩ Article dans une revue hal-00966122v1
	An all porous solid oxide fuel cell (SOFC): a bridging technology between dual and single chamber SOFCs Youmin Guo , Medhi Bessaa , Sonia Aguado , Marlu C. Steil , Damien Rembelski European Energy and Environmental Science, 2013, 6, pp.2119-212. ⟨10.1039/C3EE40131F⟩ Article dans une revue hal-00850758v1
	In situ reduction and evaluation of anode supported single chamber solid oxide fuel cells Damien Rembelski , Mathilde Rieu , Lionel Combemale , Jean-Paul Viricelle Journal of Power Sources, 2013, 242 (15), pp.811-816. ⟨10.1016/j.jpowsour.2013.05.118⟩ Article dans une revue hal-00840106v1
	Catalytic study of SOFC electrode materials in engine exhaust gas atmosphere Pauline Briault , Mathilde Rieu , Richard Laucournet , Bertrand Morel , Jean-Paul Viricelle Journal of Materials Science, 2013, 48 (20), pp.7184-7195. ⟨10.1007/s10853-013-7535-y⟩ Article dans une revue hal-00850716v1
	Electrochemical promotion of catalysis with highly dispersed Pt nanoparticles Anastasios Kambolis , Leonardo Lizarraga , Michail N. Tsampas , Laurence Burel , Mathilde Rieu Electrochemistry Communications, 2012, 12, pp.5-8. ⟨10.1016/j.elecom.2012.02.041⟩ Article dans une revue hal-00683898v1
	Characterization and Comparison of Different Cathode Materials for SC-SOFC: LSM, BSCF, SSC, and LSCF Damien Rembelski , Jean-Paul Viricelle , Mathilde Rieu , Lionel Combemale Fuel Cells, 2012, 12 (2), pp.256-264. ⟨10.1002/fuce.201100064⟩ Article dans une revue hal-00722640v1
	Electrochemical promotion of propane combustion on highly dispersed Pt nanoparticles A. Kambolis , L. Lizarraga , M. N. Tsampas , M. Rieu , J. P. Viricelle Ionic and Mixed Conducting Ceramics 8, 2012, 45, pp.535-541. ⟨10.1149/1.3701346⟩ Article dans une revue hal-01073448v1
	Electrochemical promotion of catalysis with highly dispersed Pt nanoparticles A. Kambolis , L. Lizarraga , M. N. Tsampas , L. Burel , M. Rieu Electrochemistry Communications, 2012, 19, pp.5-8. ⟨10.1016/j.elecom.2012.02.041⟩ Article dans une revue hal-00725758v1
	Elaboration of metallic compacts with high porosity for mechanical supports of SOFC Pj. Panteix , V. Baco-Carles , P. Tailhades , M. Rieu , P. Lenormand Solid State Sciences, 2009, 11 (2), pp.444-450. ⟨10.1016/j.solidstatesciences.2008.09.006⟩ Article dans une revue hal-00425042v1
	New route to prepare anodic coatings on dense and porous metallic support for SOFC application Mathilde Rieu , Pascal Lenormand , Pierre-Jean Panteix , Florence Ansart Fuel Cells Bulletin, 2008, 2008 (12), pp.12-15. ⟨10.1016/S1464-2859(08)70457-7⟩ Article dans une revue hal-04080098v1
	Preparation of Ni–YSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC Mathilde Rieu , Pascal Lenormand , Florence Ansart , Fabrice Mauvy , Julien Fullenwarth Journal of Sol-Gel Science and Technology, 2008, 45 (3), pp.307-313. ⟨10.1007/s10971-008-1689-0⟩ Article dans une revue hal-00282103v1
	Potentialities of the sol-gel route to develop cathode and electrolyte thick layers Application to SOFC systems P. Lenormand , M. Rieu , P. Cienfuegos , A. Julbe , S. Castillo Surface and Coatings Technology, 2008, 203 (5-7), pp.901-904. ⟨10.1016/j.surfcoat.2008.08.017⟩ Article dans une revue hal-00354972v1

	Functionalized SnO₂ Sensors on Flexible Substrate for Ammonia Detection at Low Temperature Jean-Paul Viricelle , Mohamad Hijazi , Valérie Stambouli , Omar Kassem , Mohamed Saadaoui 4th International Conference nanoFIS 2020 - Functional Integrated nanoSystems, Materials Center Leoben Forschung GmbH (MCL) und Techkonnex – High Tech Promotion; Karl-Franzens-Universität Graz, Nov 2020, ----, Austria. pp.2, ⟨10.3390/proceedings2020056002⟩ Communication dans un congrès emse-03064353v1
	Development of a Selective Mixed-Potential Ammonia Sensor for Automotive Exhausts Gita Nematbakhsh Abkenar , Jean-Paul Viricelle , Mathilde Rieu , Philippe Breuil 239th ECS Meeting with the 18th International Meeting on Chemical Sensors (IMCS 2020), May 2020, Montréal, Canada. pp.2163, ⟨10.1149/MA2020-01282163mtgabs⟩ Communication dans un congrès hal-02781043v1
	Environmental (scanning and transmission) electron microscopy contribution to the study of silver-based catalysts during ethylene epoxidation Cavoué T. , A. Caravaca , L. Burel , M. Aouine , Rieu M. VI International scientific school-conference for young scientists "Catalysis from Science to Industry", Oct 2020, Tomsk, Russia Communication dans un congrès hal-02962788v1
	Development of a sensitive and selective mixed-potential ammonia sensor for automotive exhausts Gita Nematbakhsh Abkenar , Jean-Paul Viricelle , Mathilde Rieu , Philippe Breuil Euromat 2019 - European congress and exhibition on advanced materials and processes, Sep 2019, Stockholm, Sweden Communication dans un congrès hal-02292212v1
	Electrochemical promotion of propylene combustion on Ag catalytic coatings I. Kalaitzidou , T. Cavoue , A. Boreave , L. Burel , F. Gaillard 25th Topical Meeting of the International Society of Electrochemistry, May 2019, Toledo, Spain Communication dans un congrès hal-02132908v1
	Development of a sensitive and selective mixed-potential ammonia sensor for automotive exhausts Gita Nematbakhsh Abkenar , Jean-Paul Viricelle , Mathilde Rieu , Philippe Breuil Fifth International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2019), International Frequency Sensor Association (IFSA), Sep 2019, Canary Islands (tenerife), Spain Communication dans un congrès hal-02325772v1
	Electrochemical Promotion of Propylene Combustion on Ag-based nanostructured catalysts I. Kalaitzidou , T. Cavoue , A. Boreave , L. Burel , F. Gaillard 10th International Conference on Environmental Catalysis & the 3rd International Symposium on Catalytic Science and Technology in Sustainable Energy and Environment (ICEC&EECAT2018), Sep 2018, Tianjin, China Communication dans un congrès hal-01879544v1
	Fabrication of SnO₂ Flexible Sensor by Inkjet Printing Technology Omar Kassem , Mohamed Saadaoui , Mathilde Rieu , Jean-Paul Viricelle EUROSENSORS 2018, Materials Center Leoben Forschungs GmbH; University of Graz (Uni Graz); Graz University of Technology (TU Graz), Sep 2018, Graz, Austria. pp.907, ⟨10.3390/proceedings2130907⟩ Communication dans un congrès hal-01997589v1
	Fabrication of flexible gas sensor based on tin oxide by inkjet printing technology Omar Kassem , Mohamed Saadaoui , Mathilde Rieu , Jean-Paul Viricelle 17th International Meeting on Chemical Sensors - IMCS 2018, University of Vienna (Austria), Jul 2018, Vienne, Austria. pp.431 à 432 / FE.5, ⟨10.5162/IMCS2018/FE.5⟩ Communication dans un congrès hal-01998551v1
	Electrochemical Promotion of Propylene Combustion on Ag Catalytic Coatings I. Kalaitzidou , T. Cavoue , A. Boreave , L. Burel , F. Gaillard 8th Tokyo Conference on Advanced Catalytic Science and Technology, Aug 2018, Yokohama Japan Communication dans un congrès hal-01864999v1
	Study of two vanadium based materials as working electrode for developing a selective mixed-potential ammonia sensor Gita Nematbakhsh Abkenar , Jean-Paul Viricelle , Mathilde Rieu , Philippe Breuil EUROSENSORS 2018, Materials Center Leoben Forschungs GmbH; University of Graz (Uni Graz); Graz University of Technology (TU Graz), Sep 2018, Graz, Austria. pp.770, ⟨10.3390/proceedings2130770⟩ Communication dans un congrès hal-01996756v1
	Electrochemical Promotion of Propylene Combustion on Ag-Based Nanostructured Catalysts Ioanna Kalaitzidou , Thomas Cavoué , A. Boreave , L. Burel , F. Gaillard AiMES 2018 Americas International Meeting on Electrochemistry and Solid State Science - 2018 ECS and SMEQ, Sep 2018, Cancun, Mexico. pp.MA2018-02 1645 Communication dans un congrès hal-01971848v1
	SnO2 sensors : towards functionalization and low temperature operation on flexible substrate? Jp. Viricelle , M. Hijazi , V. Stambouli , O. Kassem , M Saadaoui IXth Franco-Spanish Workshop IBERNAM-CMC2, Oct 2018, Tarragona, Spain Communication dans un congrès hal-01981227v1
	Synthesis and Inkjet Printing of SnO₂ Ink on a Flexible Substrate for Gas Sensor Application Omar Kassem , Mohamed Saadaoui , Mathilde Rieu , Jean-Paul Viricelle EUROSENSORS 2017, CMC2; École des Mines de Saint-Étienne, Sep 2017, Paris, France. pp.622, ⟨10.3390/proceedings1040622⟩ Communication dans un congrès hal-01617448v1
	Electrochemical Promotion of Propene Combustion on Ag Catalytic Coatings I. Kalaitzidou , T. Cavoue , A. Boreave , E. Baranova , M. Rieu 231st ECS Meeting, May 2017, Nouvelle Orleans United States Communication dans un congrès hal-01529689v1
	Sensitive and selective ammonia gas sensor based on molecularly modified SnO₂ Mohamad Hijazi , Valérie Stambouli , Mathilde Rieu , Guy Tournier , Christophe Pijolat EUROSENSORS 2017, CMC2; École des Mines de Saint-Étienne, Sep 2017, Paris, France. pp.399, ⟨10.3390/proceedings1040399⟩ Communication dans un congrès hal-01597467v1
	Study of YSZ electrolyte inks for preparation of screen-printed mixed-potential sensors for selective detection of NO_x and NH₃ Gita Nematbakhsh Abkenar , Mathilde Rieu , Philippe Breuil , Jean-Paul Viricelle EUROSENSORS 2017, CMC2; École des Mines de Saint-Étienne, Sep 2017, Paris, France. pp.456, ⟨10.3390/proceedings1040456⟩ Communication dans un congrès hal-01617536v1
	Modified SnO₂-APTES gas sensor for selective ammonia detection at room temperature Mohamad Hijazi , Mathilde Rieu , Valérie Stambouli , Guy Tournier , Jean-Paul Viricelle SURFOCAP’17 - 3^rd INTERNATIONAL WORKSHOP ON FUNCTIONALIZED SURFACES FOR SENSOR APPLICATIONS, UFC: Université de Franche-Comté; Institut FEMTO-ST: Franche-Comté électronique mécanique thermique et optique - Sciences et technologies, May 2017, Besançon, France. pp.319-322 / MATPR7087, ⟨10.1016/j.matpr.2018.10.424⟩ Communication dans un congrès hal-01920481v1
	Densification of cerium gadolinium oxide electrolyte by laser treatment: application to single-chamber solid oxide fuel cells Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie ICC6 International Congress on Ceramics , Aug 2016, Dresden, Germany Communication dans un congrès hal-01577423v1
	Functionalization of APTES modified tin dioxide gas sensor Mohamad Hijazi , Valérie Stambouli , Mathilde Rieu , Guy Tournier , Jean-Paul Viricelle IMCS 2016 - The 16^th International Meeting on Chemical Sensors, Organizing Committee of IMCS 2016; The Korean Sensors Society, Jul 2016, Ramada Plaza Jeju, Jeju Island, South Korea Communication dans un congrès hal-01373871v1
	APTES Molecularly Modified Tin Dioxide Gas Sensor M. Hijazi , V. Stambouli , M. Rieu , G. Tournier , J.-P. Viricelle The 16th International Meeting on Chemical Sensors (IMCS2016), Jul 2016, Ramada Plaza Jeju, Jeju Island, South Korea Communication dans un congrès hal-02016952v1
	Porosity modification of cerium gadolinium oxide by laser annealing: application to single-chamber solid oxide fuel cells Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie XXV International Materials Research Congress, Aug 2016, Cancun, Mexico Communication dans un congrès hal-01577421v1
	Selective Ammonia Gas Sensor based on SnO₂-APTES Modification Mohamad Hijazi , Mathilde Rieu , Valérie Stambouli , Guy Tournier , Jean-Paul Viricelle 30th anniversary Eurosensors Conference (EUROSENSORS 2016), Hungarian Academy of Sciences; Akadémiai Kiadó / AKCongress, Sep 2016, Budapest, Hungary. pp.280-283, ⟨10.1016/j.proeng.2016.11.193⟩ Communication dans un congrès hal-01436032v1
	Densification of cerium gadolinium oxide by laser treatment Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie E-MRS 2015 Spring Meeting, European Materials Research Society, May 2015, Lille, France Communication dans un congrès hal-01249808v1
	High temperature printed micro-hotplate on polyimide foil for gas sensing and sampling El Hadji Malick Camara , Mathilde Rieu , Danick Briand , Philippe Breuil , Christophe Pijolat ISOEN 2015 (16^th International Symposium on Olfaction and Electronic Noses ), Jun 2015, Dijon, France Communication dans un congrès hal-01249810v1
	Design of anodic architectures for direct methane SOFC S. Georges , N. Bailly , M. C. Steil , D. S. Nóbrega , Y. Bultel Energy, Materials, and Nanotechnology, EMN. Ceramics Meeting 2015, Jan 2015, Orlando, United States Communication dans un congrès hal-01378772v1
	Inkjet printed SnO₂ gas sensor on plastic substrate Mathilde Rieu , El Hadji Malik Camara , Guy Tournier , Jean-Paul Viricelle , Christophe Pijolat Eurosensors 2015, Sep 2015, Freibourg, Germany. pp.75-78, ⟨10.1016/j.proeng.2015.08.569⟩ Communication dans un congrès hal-01234940v1
	Gas preconcentrator made by rolling up a printed hotplate on foil El Hadji Malick Camara , Mathilde Rieu , Philippe Breuil , Christophe Pijolat , Nicolaas F de Rooij Eurosensors 2015, Sep 2015, Freibourg, Germany. pp.265-268, ⟨10.1016/j.proeng.2015.08.602⟩ Communication dans un congrès hal-01235091v1
	Recent advances in printed metal-oxide gas sensors on polymeric foil Danick Briand , Malick Camara , Nicolaas F de Rooij , Mathilde Rieu , Christophe Pijolat Gas sensors based on semiconducting metal oxides - GSSMO, University of Tübingen; Kyushu University, Jun 2015, Tübingen, Germany Communication dans un congrès hal-01336586v1
	Modification de la porosité de Ce_0,9Gd_0,1O_1,95 par traitement laser : Application pile SOFC monochambre Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie Deuxièmes plénières GdR 3652 HySPàC "Hydrogène, Systèmes et Piles à Combustible" (Axe PACEOS), GdR 3652-Philippe POGGI (SPE, UMR 6134)-Dominique GRANDJEAN (Service de la communication et de l'événementiel, Université de Corse), Oct 2015, Porticcio, France Communication dans un congrès hal-01249812v1
	Effect of Catalyst Layer and Fuel Utilization on the Durability of Direct Methane SOFC Samuel Georges , Shayenne. D. Nóbrega , Seng Kian Cheah , M.C. Steil , Yann Bultel 228th Electrochemical Society Meeting, Oct 2015, Phoenix, AZ United States. pp.51-59, ⟨10.1149/06916.0051ecst⟩ Communication dans un congrès hal-01340245v1
	Modification de la porosité de Ce0,9Gd0,1O1,95 par traitement laser : application pile SOFC Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie Matériaux 2014, Nov 2014, Montpellier, France Communication dans un congrès ujm-01012036v1
	"Modification de la porosité de Ce_0,9Gd_0,1O_1,95 par traitement laser : Application aux piles SOFC" Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie Journée annuelle CIMREV, Jun 2014, Saint-Etienne, France Communication dans un congrès hal-01109432v1
	Anode-supported single-chamber SOFC for energy harvesting from exhaust gases of thermal engine Pauline Briault , Jean-Paul Viricelle , Mathilde Rieu , Richard Laucournet , Bertrand Morel IDHEA (International Discussions on Hydrogen Energy and Applications), May 2014, Nantes, France Communication dans un congrès hal-01107597v1
	Anode supported single chamber SOFC development for energy recovery of engine exhaust gases Pauline Briault , Mathilde Rieu , Richard Laucournet , Bertrand Morel , Jean-Paul Viricelle XIVe Congrès de la Société Française de Génie des Procédés, Oct 2013, Lyon, France. pp.No 226 Communication dans un congrès hal-00930150v1
	Anode-supported single-chamber SOFC for energy recovery from exhaust gases of thermal engines Jean-Paul Viricelle , Pauline Briault , Mathilde Rieu , Richard Laucournet , Bertrand Morel European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 2013, Sep 2013, Séville, Spain Communication dans un congrès hal-00848785v1
	Development of anode supported Single Chamber Solid Oxide Fuel Cells running in air/methane mixture Jean-Paul Viricelle , Damien Rembelski , Mathilde Rieu , Lionel Combemale IC3 (International Workshop of Ionically Conducting Ceramics for Catalysis), Sep 2013, Lyon, France Communication dans un congrès hal-00928513v1
	SOFC long term operation in pure methane by gradual internal reforming Samuel Georges , Nicolas Bailly , César Marlu Steil , Yann Bultel , Abdelkhader Hadjar 13th International Symposium on Solid Oxide Fuel Cells (SOFC-XIII), Oct 2013, Okinawa, Japan. pp.3023-3030, ⟨10.1149/05701.3023ecst⟩ Communication dans un congrès hal-00929751v1
	Anode-supported single-chamber SOFC for energy recovery from exhaust gases of thermal engine Jean-Paul Viricelle , Pauline Briault , Mathilde Rieu , Richard Laucournet , Bertrand Morel 13th International Conference of the European Ceramic Society, Jun 2013, Limoges, France Communication dans un congrès hal-00848556v1
	"Advantages of the sol-gel route to develop stackings from electrodes and electrolyte thick layers. Application to SOFC systems" P. Lenormand , M. Rieu , R.F. Cienfuegos , A. Julbe , S. Castillo 35th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2008), Apr 2008, San Diego, Californie, United States Communication dans un congrès hal-00317674v1

	Electrochemical Promotion of Ethylene Epoxidation over Ag-based composite electrodes T. Cavoue , T. Truong , I. Kalaitzidou , A. Boreave , L. Burel 25th Topical Meeting of the International Society of Electrochemistry, May 2019, Toledo, Spain Poster de conférence hal-02132905v1
	Development of a NO_x and NH₃ sensor for automotive exhaust applications and control of industrial process Gita Nematbakhsh Abkenar , Mathilde Rieu , Philippe Breuil , Jean-Paul Viricelle Journée Scientifique 2018 du Codegepra, Nov 2018, Saint-Etienne, France. , Journée scientifique du CODEGEPRA - Le Génie des Procédés en Rhône-Alpes Auvergne, pp.P4 Poster de conférence hal-01973343v1
	Promotion électrochimique de la combustion du propène sur des couches catalytiques d’argent T. Cavoue , I. Kalaitzidou , A. Boreave , L. Burel , F. Gaillard GECat 2018 (Groupe d’Etude en Catalyse), May 2018, Trégunc France Poster de conférence hal-01808524v1
	Electrochemical removal of nox on pt-ba impregnated lscf/gdc electrode X. Wang , A. Westermann , X.Y. Shi , N.S. Cai , M. Rieu 229th ECS Meeting, May 2016, SAN DIEGO United States Poster de conférence hal-01323968v1
	Modification de la porosité de Ce_0,9Gd_0,1O_1,95 par traitement laser : Application aux piles SOFC Mariana Mariño , Mathilde Rieu , Jean-Paul Viricelle , Florence Garrelie Fonctionnalisation de Surfaces et Caractérisations. Pôle optique Rhône-Alpes (ORA), Jun 2014, Saint-Etienne, France Poster de conférence hal-01107588v1

	Procédé d’élaboration d’un matériau composite avec des nanoparticules de type cœur-coquille dont la coquille est en graphène Omar Kassem , Mathilde Rieu , Jean-Paul Viricelle , Mohamed Saadaoui France, N° de brevet: FR3107284A1; WO2021160874A1. 2021 Brevet hal-03382701v1

Mathilde Rieu

Publications

From the Modeling of an Electrochemical YSZ-Based Gas Sensor Used in Electrolysis Mode

Protection of NOx Sensors from Sulfur Poisoning in Glass Furnaces by the Optimization of a “SO2 Trap”

Rational Development of IT-SOFC Electrodes Based on the Nanofunctionalization of La0.6Sr0.4Ga0.3Fe0.7O3 with Oxides. Part 2: Anodes by Means of Manganite Oxide

Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing

Development of a selective ammonia YSZ-based sensor and modeling of its response

Single chamber Solid Oxide Fuel Cells selective electrodes: A real chance with brownmillerite-based nanocomposites

Catalytic and Electrochemical Properties of Ag Infiltrated Perovskite Coatings for Propene Deep Oxidation

Ethylene epoxidation on Ag/YSZ electrochemical catalysts: Understanding of oxygen electrode reactions

A novel approach of a fully inkjet printed SnO2-based gas sensor on a flexible foil

Simulation of nanosecond IR laser annealing of cerium gadolinium oxide

Synthesis and inkjet printing of sol–gel derived tin oxide ink for flexible gas sensing application

Rational Development of IT-SOFC Electrodes Based on the Nanofunctionalization of La0.6Sr0.4Ga0.3Fe0.7O3 with Oxides. PART 1: Cathodes by Means of Iron Oxide

Electrochemical promotion of propylene combustion on Ag catalytic coatings

Ambient temperature selective ammonia gas sensor based on SnO2-APTES modifications

Synthesis and characterization of tin dioxide thick film modified by APTES in vapor and liquid phases

Electrochemical Removal of NOx on Ceria-Based Catalyst-Electrodes

Selective Ammonia Gas Sensor based on SnO 2 -APTES Modification

Fully inkjet printed SnO2 gas sensor on plastic substrate

Laser induced densification of cerium gadolinium oxide: application to single-chamber solid oxide fuel cells

Fabrication and characterization of anode-supported single chamber solid oxide fuel cell based on La0.6Sr0.4Co0.2Fe0.8O3−δ-Ce0.9Gd0.1O1.95 composite cathode

Anode supported single chamber solid oxide fuel cells operating in exhaust gases of thermal engine

Tunable architecture for flexible and highly conductive graphene-polymer composites

An all porous solid oxide fuel cell (SOFC): a bridging technology between dual and single chamber SOFCs

In situ reduction and evaluation of anode supported single chamber solid oxide fuel cells

Catalytic study of SOFC electrode materials in engine exhaust gas atmosphere

Electrochemical promotion of catalysis with highly dispersed Pt nanoparticles

Characterization and Comparison of Different Cathode Materials for SC-SOFC: LSM, BSCF, SSC, and LSCF

Electrochemical promotion of propane combustion on highly dispersed Pt nanoparticles

Electrochemical promotion of catalysis with highly dispersed Pt nanoparticles

Elaboration of metallic compacts with high porosity for mechanical supports of SOFC

New route to prepare anodic coatings on dense and porous metallic support for SOFC application

Preparation of Ni–YSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC

Potentialities of the sol-gel route to develop cathode and electrolyte thick layers Application to SOFC systems

Functionalized SnO2 Sensors on Flexible Substrate for Ammonia Detection at Low Temperature

Development of a Selective Mixed-Potential Ammonia Sensor for Automotive Exhausts

Environmental (scanning and transmission) electron microscopy contribution to the study of silver-based catalysts during ethylene epoxidation

Development of a sensitive and selective mixed-potential ammonia sensor for automotive exhausts

Electrochemical promotion of propylene combustion on Ag catalytic coatings

Development of a sensitive and selective mixed-potential ammonia sensor for automotive exhausts

Electrochemical Promotion of Propylene Combustion on Ag-based nanostructured catalysts

Fabrication of SnO2 Flexible Sensor by Inkjet Printing Technology

Fabrication of flexible gas sensor based on tin oxide by inkjet printing technology

Electrochemical Promotion of Propylene Combustion on Ag Catalytic Coatings

Study of two vanadium based materials as working electrode for developing a selective mixed-potential ammonia sensor

Electrochemical Promotion of Propylene Combustion on Ag-Based Nanostructured Catalysts

SnO2 sensors : towards functionalization and low temperature operation on flexible substrate?

Synthesis and Inkjet Printing of SnO2 Ink on a Flexible Substrate for Gas Sensor Application

Electrochemical Promotion of Propene Combustion on Ag Catalytic Coatings

Sensitive and selective ammonia gas sensor based on molecularly modified SnO2

Study of YSZ electrolyte inks for preparation of screen-printed mixed-potential sensors for selective detection of NOx and NH3

Modified SnO2-APTES gas sensor for selective ammonia detection at room temperature

Densification of cerium gadolinium oxide electrolyte by laser treatment: application to single-chamber solid oxide fuel cells

Functionalization of APTES modified tin dioxide gas sensor

APTES Molecularly Modified Tin Dioxide Gas Sensor

Porosity modification of cerium gadolinium oxide by laser annealing: application to single-chamber solid oxide fuel cells

Selective Ammonia Gas Sensor based on SnO2-APTES Modification

Densification of cerium gadolinium oxide by laser treatment

High temperature printed micro-hotplate on polyimide foil for gas sensing and sampling

Design of anodic architectures for direct methane SOFC

Inkjet printed SnO2 gas sensor on plastic substrate

Gas preconcentrator made by rolling up a printed hotplate on foil

Recent advances in printed metal-oxide gas sensors on polymeric foil

Modification de la porosité de Ce0,9Gd0,1O1,95 par traitement laser : Application pile SOFC monochambre

Effect of Catalyst Layer and Fuel Utilization on the Durability of Direct Methane SOFC

Modification de la porosité de Ce0,9Gd0,1O1,95 par traitement laser : application pile SOFC

"Modification de la porosité de Ce0,9Gd0,1O1,95 par traitement laser : Application aux piles SOFC"

Anode-supported single-chamber SOFC for energy harvesting from exhaust gases of thermal engine

Anode supported single chamber SOFC development for energy recovery of engine exhaust gases

Anode-supported single-chamber SOFC for energy recovery from exhaust gases of thermal engines

Development of anode supported Single Chamber Solid Oxide Fuel Cells running in air/methane mixture

SOFC long term operation in pure methane by gradual internal reforming

Anode-supported single-chamber SOFC for energy recovery from exhaust gases of thermal engine

"Advantages of the sol-gel route to develop stackings from electrodes and electrolyte thick layers. Application to SOFC systems"

Electrochemical Promotion of Ethylene Epoxidation over Ag-based composite electrodes

Development of a NOx and NH3 sensor for automotive exhaust applications and control of industrial process

Promotion électrochimique de la combustion du propène sur des couches catalytiques d’argent

Electrochemical removal of nox on pt-ba impregnated lscf/gdc electrode

Modification de la porosité de Ce0,9Gd0,1O1,95 par traitement laser : Application aux piles SOFC

Protection of NOx Sensors from Sulfur Poisoning in Glass Furnaces by the Optimization of a “SO₂ Trap”

Rational Development of IT-SOFC Electrodes Based on the Nanofunctionalization of La_0.6Sr_0.4Ga_0.3Fe_0.7O₃ with Oxides. Part 2: Anodes by Means of Manganite Oxide

A novel approach of a fully inkjet printed SnO₂-based gas sensor on a flexible foil

Rational Development of IT-SOFC Electrodes Based on the Nanofunctionalization of La_0.6Sr_0.4Ga_0.3Fe_0.7O₃ with Oxides. PART 1: Cathodes by Means of Iron Oxide

Ambient temperature selective ammonia gas sensor based on SnO₂-APTES modifications

Electrochemical Removal of NO_x on Ceria-Based Catalyst-Electrodes

Fully inkjet printed SnO₂ gas sensor on plastic substrate

Fabrication and characterization of anode-supported single chamber solid oxide fuel cell based on La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ-Ce_0.9Gd_0.1O_1.95 composite cathode

Functionalized SnO₂ Sensors on Flexible Substrate for Ammonia Detection at Low Temperature

Fabrication of SnO₂ Flexible Sensor by Inkjet Printing Technology

Synthesis and Inkjet Printing of SnO₂ Ink on a Flexible Substrate for Gas Sensor Application

Sensitive and selective ammonia gas sensor based on molecularly modified SnO₂

Study of YSZ electrolyte inks for preparation of screen-printed mixed-potential sensors for selective detection of NO_x and NH₃

Modified SnO₂-APTES gas sensor for selective ammonia detection at room temperature

Selective Ammonia Gas Sensor based on SnO₂-APTES Modification

Inkjet printed SnO₂ gas sensor on plastic substrate

Modification de la porosité de Ce_0,9Gd_0,1O_1,95 par traitement laser : Application pile SOFC monochambre

"Modification de la porosité de Ce_0,9Gd_0,1O_1,95 par traitement laser : Application aux piles SOFC"

Development of a NO_x and NH₃ sensor for automotive exhaust applications and control of industrial process

Modification de la porosité de Ce_0,9Gd_0,1O_1,95 par traitement laser : Application aux piles SOFC