Accéder directement au contenu

Lucien Laiarinandrasana

68
Documents
Identifiants chercheurs

Présentation

**Formation** HDR soutenue en Décembre 2005, Université François Rabelais, Tours Thèse de doctorat soutenue en Novembre 1994, Ecole Nationale Supérieure des Mines de Paris, Paris - Commissariat à l’Energie Atomique, Saclay DEA “Mécanique et Matériaux”, 1991 Université Paris XIII, Villetaneuse Diplôme d’ingénieur: Génie Maritime, 1989-1991, Ecole Nationale Supérieure de Techniques Avancées, Paris Diplôme d’ingénieur: Sciences et Technique, 1982-1984 Ecole Navale, Brest **Thèmes de recherche** Comportement, endommagement et rupture de matériaux polymères et composites à matrice organique Expérimentation multi-échelle par analyse 3D (Tomographie/Laminographie in-situ): relation entre microstructure et propriétés mécaniques Observations des micro-mécanismes de déformation, d'endommagement et de rupture Développement de modèles constitutifs (lois de comportement en multiaxial) dédiés à la simulation numérique Etudes de critères d’amorçage et de propagation de fissure sous chargements monotone ou cyclique Prédiction de la durée de vie d’une structure industrielle à la conception ou en service (durée de vie résiduelle) **Enseignements** Direction de thèse en Sciences et Génie des Matériaux Master M2 Materials and Engineering Sciences in Paris (MAGIS): Durabilité des Polymères Mastère spécialisé Design des Matériaux et des Structures (DMS): Prédiction des durées de vie Cycle ingénieurs: Mines Paris, EPF Ecole d'ingénieurs, Ecole Supérieure de la Chimie Organique et Minérale (ESCOM) **Formation continue** Stage CACEMI MC11: Introduction aux essais de fatigue Stage CACEMI MC04: Endommagements et mécanismes de rupture des matériaux industriels **Autres activités académiques** Responsable du pôle de recherche Mécanique Expérimentale et Matériaux (MEM) Membre de l’International Advisory Board of the International Conference on Deformation, Yield and Fracture of Polymers (DYFP) Kerkrade, Hollande Membre du Conseil Scientifique du pôle de compétitivité POLYMERIS Membre du TC4 de l’European Structural Integrity Society (ESIS): Fracture of Polymers Membre du CA de l'association MECAMAT

Publications

Effect of fibre concentration on the mechanical properties of welded reinforced polypropylene

E. Mofakhami , L. Gervat , B. Fayolle , G. Miquelard-Garnier , Cristian Ovalle
Composites Part B: Engineering, 2024, 269, pp.111111. ⟨10.1016/j.compositesb.2023.111111⟩
Article dans une revue hal-04420214v1

Plane–strain condition in plane–strain grooved tensile (PSGT) specimens during traction and creep loading at room and high temperature

Cristian Ovalle , M. Broudin , L. Laiarinandrasana
Article dans une revue hal-04420186v1

Dependence on strain rate of the glass and ductile-to-brittle transition temperatures of an ultra-high molecular weight polyethylene used at cryogenic temperature

Nathan Odou , James Hermary , Cristian Ovalle , Lucien Laiarinandrasana
Continuum Mechanics and Thermodynamics, 2023, ⟨10.1007/s00161-023-01261-5⟩
Article dans une revue hal-04420174v1
Image document

Thermal Degradation of Fluorosilicone Elastomers

Emmanuel Richaud , Leticia Pires , Sébastien Roland , Laurianne Truffault , Lucien Laiarinandrasana
Macromolecular Symposia, 2022, 405 (1), pp.2100220. ⟨10.1002/masy.202100220⟩
Article dans une revue hal-03825121v2
Image document

Short-term creep and low cycle fatigue unified criterion for a hybridised composite material

Stéphane Gillet , Thomas Jacopin , Sébastien Joannès , Nacera Bedrici , Lucien Laiarinandrasana
International Journal of Fatigue, 2022, 155, pp.106571. ⟨10.1016/j.ijfatigue.2021.106571⟩
Article dans une revue hal-03462858v1
Image document

Ductile crack initiation and growth on a plasticized Polyvinylchloride during air bag deployment

Lucien Laiarinandrasana , Clément Bertaux , Nicolas Amouroux , Cristian Ovalle Rodas
Journal of Theoretical, Computational and Applied Mechanics, 2021, 2021, pp.1-18. ⟨10.46298/jtcam.7401⟩
Article dans une revue hal-03206110v2
Image document

Nanocavitation mechanisms in deformed High Density PolyEthylene (HDPE) using synchrotron radiation NanoTomography

Cristian Ovalle , Peter Cloetens , Henry Proudhon , Thilo F. Morgeneyer , Lucien Laiarinandrasana
Polymer, 2021, 229, pp.123959. ⟨10.1016/j.polymer.2021.123959⟩
Article dans une revue hal-03288721v1
Image document

Impact speed dependency of the ductile failure threshold temperature for a plasticized polyvinylchloride

Clément Bertaux , Nicolas Amouroux , C. Ovalle Ovalle Rodas , Lucien Laiarinandrasana
Continuum Mechanics and Thermodynamics, 2021, 33 (6), pp.2375-2390. ⟨10.1007/s00161-021-01026-y⟩
Article dans une revue hal-03359093v1
Image document

Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup

Faisal Islam , Sébastien Joannès , Steve Bucknell , Yann Leray , Anthony R. Bunsell
Journal of Reinforced Plastics and Composites, 2020, 39 (3-4), pp.144 - 162. ⟨10.1177/0731684419873712⟩
Article dans une revue hal-02321387v1

Effects of stress triaxiality ratio on the heat build-up of polyamide 11 under loading

C. Ovalle , G. Boisot , Lucien Laiarinandrasana
Mechanics of Materials, 2020, 145, pp.103375. ⟨10.1016/j.mechmat.2020.103375⟩
Article dans une revue hal-03189505v1
Image document

Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness

Sébastien Joannès , Faisal Islam , Lucien Laiarinandrasana
Applied Composite Materials, 2020, 27 (3), pp.165-184. ⟨10.1007/s10443-020-09803-9⟩
Article dans une revue hal-03110082v1
Image document

Microstructural observations supporting thermography measurements for short glass fibre thermoplastic composites under fatigue loading

Lucien Laiarinandrasana , Thilo F. Morgeneyer , Y. Cheng , L. Helfen , V. Le Saux
Continuum Mechanics and Thermodynamics, 2020, 32, pp.451-469. ⟨10.1007/s00161-019-00748-4⟩
Article dans une revue hal-02052685v1
Image document

Elastic Properties of Polychloroprene Rubbers in Tension and Compression during Ageing

Rami Bouaziz , Laurianne Truffault , Rouslan Borisov , Cristian Ovalle , Lucien Laiarinandrasana
Polymers, 2020, 12 (10), pp.2354. ⟨10.3390/polym12102354⟩
Article dans une revue hal-02980985v1
Image document

Microstructure-mechanical properties relationships in vibration welded glass-fiber-reinforced polyamide 66: A high-resolution X-ray microtomography study

Eeva Mofakhami , Sylvie Tencé-Girault , Jonathan Perrin , Mario Scheel , Laurent Gervat
Polymer Testing, 2020, 85, pp.1-12. ⟨10.1016/j.polymertesting.2020.106454⟩
Article dans une revue hal-02532971v1

Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques

Jan Rojek , Christian Breite , Yentl Swolfs , Lucien Laiarinandrasana
Continuum Mechanics and Thermodynamics, 2020, 32 (2), pp.471-488. ⟨10.1007/s00161-020-00865-5⟩
Article dans une revue hal-03189508v1
Image document

Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience

Francesco Baldi , Silvia Agnelli , Luca Andena , Bamber Blackman , Leonardo Castellani
Materials Performance and Characterization, 2020, 9 (5), pp.20190175. ⟨10.1520/MPC20190175⟩
Article dans une revue hal-03207111v1
Image document

Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites

Ashok Rajpurohit , Sébastien Joannès , Vicky Singery , Philippe Sanial , Lucien Laiarinandrasana
Journal of Composites Science, 2020, 4 (1), pp.6. ⟨10.3390/jcs4010006⟩
Article dans une revue hal-02469579v1

Stress Heterogeneity Leading to Void Nucleation within Spherulites for Semi-Crystalline Polymers

Lucien Laiarinandrasana
Crystals, 2019, 9 (6), pp.298. ⟨10.3390/cryst9060298⟩
Article dans une revue hal-03189519v1
Image document

Development of a Versatile Mechanical Testing Device for In Situ Synchrotron Tomography and Diffraction Experiments

Maxime Pelerin , Andrew King , Lucien Laiarinandrasana , Henry Proudhon
Integrating Materials and Manufacturing Innovation, 2019, 8 (3), pp.378-387. ⟨10.1007/s40192-019-00143-6⟩
Article dans une revue hal-02355866v1
Image document

In Situ tensile tests to analyze the mechanical response, crack initiation, and crack propagation in single polyamide 66 fibers

Alba Marcellan , Anthony Bunsell , Roland Piques , Lucien Laiarinandrasana
Journal of Polymer Science Part B: Polymer Physics, 2019, 57 (11), pp.680-690. ⟨10.1002/polb.24823⟩
Article dans une revue hal-02486413v1

Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres

Faisal Islam , Sébastien Joannès , Lucien Laiarinandrasana
Journal of Composites Science, 2019, 3 (3), pp.69. ⟨10.3390/jcs3030069⟩
Article dans une revue hal-02321373v1

Anisotropic (Continuum Damage Mechanics)-based multi-mechanism model for semi-crystalline polymer

Walid Ayadi , Lucien Laiarinandrasana , Kacem Sai
International Journal of Damage Mechanics, 2018, 27 (3), pp.357-386. ⟨10.1177/1056789516679494⟩
Article dans une revue hal-01759183v1

Study of the plastic deformation behaviour of ductile polymers: Use of the material key curves

S. Agnelli , F. Baldi , L. Castellani , K. Pisoni , M. Vighi
Mechanics of Materials, 2018, 117, pp.105-115. ⟨10.1016/j.mechmat.2017.11.002⟩
Article dans une revue hal-01677854v1

Time dependent voiding mechanisms in polyamide 6 submitted to high stress triaxiality : experimental characterisation and finite element modelling

Nathan Selles , Andrew King , Henry Proudhon , Nicolas Saintier , Lucien Laiarinandrasana
Mechanics of Time-Dependent Materials, 2018, 22 (3), pp.351-371. ⟨10.1007/s11043-017-9360-1⟩
Article dans une revue hal-01874758v1
Image document

Voiding mechanisms in deformed polyamide 6 observed at the nanometric scale

Nathan Selles , Peter Cloetens , Henry Proudhon , Thilo F. Morgeneyer , Olga Klinkova
Macromolecules, 2017, 50 (11), pp.4372-4383. ⟨10.1021/acs.macromol.7b00727⟩
Article dans une revue hal-01549074v1

Finite element modelling of woven composite failure modes at the mesoscopic scale : deterministic versus stochastic approaches

Quentin Roirand , Djamel Missoum-Benziane , Alain Thionnet , Lucien Laiarinandrasana
Continuum Mechanics and Thermodynamics, 2017, 29 (5), pp.1081-1092. ⟨10.1007/s00161-017-0553-2⟩
Article dans une revue hal-01610235v1

Modelling of failure of woven composites. Part 1 : Nomenclature defining the interzone concept

Alain Thionnet , Wassim Trabelsi , Quentin Roirand , Anthony R. Bunsell , Lucien Laiarinandrasana
Applied Composite Materials, 2016, 23 (4), pp.659-679. ⟨10.1007/s10443-016-9479-2⟩
Article dans une revue hal-01357875v1

Observations by in-situ X-ray synchrotron computed tomography of the microstructural evolution of semi-crystalline Polyamide 11 during deformation

Pierre-Alexis Poulet , Gilles Hochstetter , Andrew King , Henry Proudhon , Sébastien Joannès
Polymer Testing, 2016, 56, pp.245-260. ⟨10.1016/j.polymertesting.2016.10.023⟩
Article dans une revue hal-01421561v1

Three dimensional quantification of anisotropic void evolution in deformed semi-crystalline polyamide 6

Lucien Laiarinandrasana , Olga Klinkova , Franck N'Guyen , Henry Proudhon , Thilo F. Morgeneyer
International Journal of Plasticity, 2016, 83, pp.19-36. ⟨10.1016/j.ijplas.2016.04.001⟩
Article dans une revue hal-01357865v1

Modelling of failure of woven composites. Part 2 : Experimental and numerical justification of the interzone concept

Lucien Laiarinandrasana , Wassim Trabelsi , Quentin Roirand , Anthony R. Bunsell , Alain Thionnet
Applied Composite Materials, 2016, 23 (4), pp.681-705. ⟨10.1007/s10443-016-9480-9⟩
Article dans une revue hal-01357881v1

Voiding mechanisms in semi-crystalline polyamide 6 during creep tests assessed by damage based constitutive relationships and finite elements calculations

Nathan Selles , Nicolas Saintier , Lucien Laiarinandrasana
International Journal of Plasticity, 2016, 86, pp.112-127. ⟨10.1016/j.ijplas.2016.08.004⟩
Article dans une revue hal-01421403v1

Comparison of voiding mechanisms in semi-crystalline polyamide 6 during tensile and creep tests

Nathan Selles , Franck N'Guyen , Thilo F. Morgeneyer , Henry Proudhon , Wolfgang Ludwig
Polymer Testing, 2016, 49, pp.137-146. ⟨10.1016/j.polymertesting.2015.11.019⟩
Article dans une revue hal-01269595v1

Structural versus microstructural evolution of semi-crystalline polymers during necking under tension: Influence of the skin-core effects, the relative humidity and the strain rate

Lucien Laiarinandrasana , Nathan Selles , Olga Klinkova , Thilo F. Morgeneyer , Henry Proudhon
Polymer Testing, 2016, 55, pp.297-309. ⟨10.1016/j.polymertesting.2016.09.012⟩
Article dans une revue hal-01717685v1
Image document

3D damage micromechanisms in polyamide 6 ahead of a severe notch studied by in situ synchrotron laminography

Yin Cheng , Lucien Laiarinandrasana , Lukas Helfen , Henry Proudhon , Olga Klinkova
Macromolecular Chemistry and Physics, 2016, 217, pp.701-715. ⟨10.1002/macp.201500316⟩
Article dans une revue hal-01402600v1
Image document

Comparative study of continuum damage mechanics and Mechanics of Porous Media based on multi-mechanism model on Polyamide 6 semi-crystalline polymer

M. Jeridi , Lucien Laiarinandrasana , Kacem Sai
International Journal of Solids and Structures, 2015, 53, pp.12-27. ⟨10.1016/j.ijsolstr.2014.10.031⟩
Article dans une revue hal-01101447v1

Damage based model to study the effect of notch introduction technique on the J-integral value of PolyOxyMethylene

Lucien Laiarinandrasana , Jonathan Ricard , Fabrice Guigné , Yin Cheng , Thilo F. Morgeneyer
Engineering Fracture Mechanics, 2015, 149, pp.214-229. ⟨10.1016/j.engfracmech.2015.08.031⟩
Article dans une revue hal-01272301v1

Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

S. Agnelli , F. Baldi , B.R.K. Blackman , L. Castellani , P.M. Frontini
Polymer Testing, 2015, 44, pp.72-81. ⟨10.1016/j.polymertesting.2015.03.019⟩
Article dans une revue hal-01165294v1

Experimental study of the crack depth ratio threshold to analyze the slow crack growth by creep of high density polyethylene pipes

Lucien Laiarinandrasana , Clémence Devilliers , Jean Marc Lucatelli , Emmanuelle Gaudichet-Maurin , Jean Michel Brossard
International Journal of Pressure Vessels and Piping, 2014, 122, pp.22-30. ⟨10.1016/j.ijpvp.2014.07.002⟩
Article dans une revue hal-01078760v1

Damage and fracture mechanisms of polyoxymethylene : multiscale experimental study and finite element modeling

Jonathan Ricard , Fabrice Guigné , Lucien Laiarinandrasana
Engineering Fracture Mechanics, 2014, 115, pp.270-283. ⟨10.1016/j.engfracmech.2013.11.011⟩
Article dans une revue hal-00942920v1

Experimental investigation and modelling of compressibility induced by damage in carbon black-reinforced natural rubber

Sabine Cantournet , Khaled Layouni , Lucien Laiarinandrasana , Roland Piques
Comptes Rendus Mécanique, 2014, 342, pp.299-310. ⟨10.1016/j.crme.2014.02.005⟩
Article dans une revue hal-00148574v1

Nanovoid morphology and distribution in deformed HDPE studied by magnified synchrotron radiation holotomography

Thilo F. Morgeneyer , Henry Proudhon , Peter Cloetens , Wolfgang Ludwig , Quentin Roirand
Polymer, 2014, 55, pp.6439-6443. ⟨10.1016/j.polymer.2014.10.022⟩
Article dans une revue hal-01102339v1

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

Lucien Laiarinandrasana , Francesco Baldi , Silvia Agnelli , Theonis Riccò
Polymer Testing, 2013, 32 (8), pp.1326-1333. ⟨10.1016/j.polymertesting.2013.08.007⟩
Article dans une revue hal-03359095v1

Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model

Henri-Alexandre Cayzac , Kacem Sai , Lucien Laiarinandrasana
International Journal of Plasticity, 2013, 51, pp.47-64. ⟨10.1016/j.ijplas.2013.06.008⟩
Article dans une revue hal-00905508v1

Effect of multiaxial stress state on morphology and spatial distribution of voids in deformed semicrystalline polymer assessed by x-ray tomography

Lucien Laiarinandrasana , Thilo F. Morgeneyer , Henry Proudhon , Franck N'Guyen , Éric Maire
Macromolecules, 2012, 45, pp.4658-4668. ⟨10.1021/ma3005247⟩
Article dans une revue hal-00725911v1

Combining X‐ray Microtomography with Full Field Finite Elements Method to Study 3 D Cracking in Stuctural Materials

Henry Proudhon , Jia Li , Vincent Chiaruttini , Thilo F. Morgeneyer , Lucien Laiarinandrasana
Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Jul, 2012
Article dans une revue hal-01668797v1

Toughness improvement of epoxy networks by nanophase-separating antiplasticizers

Lucien Laiarinandrasana , Y. Fu , Jean Louis Halary
Journal of Applied Polymer Science, 2012, 123, pp.3437-3447. ⟨10.1002/app.34646⟩
Article dans une revue hal-00675986v1
Image document

Fracture behavior of amorphous and semicrystalline blends of poly(vinylidene fluoride) and poly(methyl methacrylate)

Lucien Laiarinandrasana , Yannick Nziakou , Jean Louis Halary
Journal of Polymer Science Part B: Polymer Physics, 2012, Deformation, Yield and Fracture of Polymers, 50 (24), pp.1740-1747. ⟨10.1002/polb.23188⟩
Article dans une revue hal-03359089v1

Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE

Benoît Piezel , B.C.N. Mercatoris , Wassim Trabelsi , Lucien Laiarinandrasana , Alain Thionnet
Composite Structures, 2012, 94, pp.2343-2357. ⟨10.1016/j.compstruct.2012.03.015⟩
Article dans une revue hal-00700994v1

Modelling the effects of various contents of fillers on the relaxation rate of elastomers

Lucien Laiarinandrasana , Aurélie Jean , Dominique Jeulin , Samuel Forest
Materials & Design, 2012, 33, pp.75-82. ⟨10.1016/j.matdes.2011.06.054⟩
Article dans une revue hal-00624105v1
Image document

Multi-scale modelling of heterogeneous shell structures

T.J. Massart , B.C.N. Mercatoris , Benoît Piezel , P. Berke , Lucien Laiarinandrasana
Computer Assisted Mechanics and Engineering Sciences, 2011, 18, pp.53-71
Article dans une revue hal-00714256v1

Interactions chimiques des tubes en polyéthylène avec le chlore en eau potable

E. Gaudichet-Maurin , Clémence Devilliers , P. Fernandes , S. Oberti , J.M. Lucatelli
TSM. Techniques Sciences Méthodes – Génie urbain, génie rural, 2011, 9 (Septembre), pp.28-38
Article dans une revue hal-00659435v1

Multi-mechanism damage-plasticity model for semi-crystalline polymer: Creep damage of notched specimen of PA6

Kacem Sai , Lucien Laiarinandrasana , I. Ben Naceur , Jacques Besson , M. Jeridi
Materials Science and Engineering: A, 2011, 528, pp.1087-1093. ⟨10.1016/j.msea.2010.09.071⟩
Article dans une revue hal-00553177v1
Image document

Ring tests on high density polyethylene : full investigation assisted by finite element modeling

Lucien Laiarinandrasana , Clémence Devilliers , S. Oberti , E. Gaudichet-Maurin , B. Fayolle
International Journal of Pressure Vessels and Piping, 2011, 88 (1), pp.1-10. ⟨10.1016/j.ijpvp.2010.12.002⟩
Article dans une revue hal-00565851v1

Experimental investigations and modeling of volume change induced by void growth in polyamide 11

Guillaume Boisot , Lucien Laiarinandrasana , Jacques Besson , C. Fond , Gilles Hochstetter
International Journal of Solids and Structures, 2011, 48 (19), pp.2642-2654. ⟨10.1016/j.ijsolstr.2011.05.016⟩
Article dans une revue hal-00624022v1

Effects of aging on the creep behaviour and residual lifetime assessment of polyvinyl chloride (PVC) pipes

Lucien Laiarinandrasana , E. Gaudichet , S. Oberti , Clémence Devilliers
International Journal of Pressure Vessels and Piping, 2011, 88, pp.99-108. ⟨10.1016/j.ijpvp.2011.01.002⟩
Article dans une revue hal-00595870v1
Image document

Damage of semicrystalline polyamide 6 assessed by 3D X-ray tomography: From microstructural evolution to constitutive modeling

Lucien Laiarinandrasana , Thilo F. Morgeneyer , Henry Proudhon , Cédric Regrain
Journal of Polymer Science Part B: Polymer Physics, 2010, 48 (13), pp.1516-1525. ⟨10.1002/polb.22043⟩
Article dans une revue hal-00509794v1

Experimental and numerical study of creep and creep rupture behavior of PA6

Cédric Regrain , Lucien Laiarinandrasana , Sophie Toillon
Engineering Fracture Mechanics, 2009, 76, pp.2656-2665. ⟨10.1016/j.engfracmech.2009.04.016⟩
Article dans une revue hal-00438802v1

A local approach to creep fracture by slow crack growth in an MDPE : damage modelling

Hedi Ben Hadj Hamouda , Lucien Laiarinandrasana , Roland Piques
International Journal of Pressure Vessels and Piping, 2009, 86, pp.228-238. ⟨10.1016/j.ijpvp.2008.09.002⟩
Article dans une revue hal-00367963v1

Multi-mechanism models for semi-crystalline polymer: Constitutive relations and finite element implementation

Cédric Regrain , Lucien Laiarinandrasana , Sophie Toillon , Kacem Sai
International Journal of Plasticity, 2009, 25, pp.1253-1279. ⟨10.1016/j.ijplas.2008.09.010⟩
Article dans une revue hal-00390737v1

Temperature dependent mechanical behaviour of PVDF: Experiments and numerical modelling

Lucien Laiarinandrasana , Jacques Besson , Mélanie Lafarge , Gilles Hochstetter
International Journal of Plasticity, 2009, 25, pp.1301-1324. ⟨10.1016/j.ijplas.2008.09.008⟩
Article dans une revue hal-00390741v1

Accounting for porosity, time and temperature dependency in fracture mechanics concepts on polyvinylidene fluoride material

Lucien Laiarinandrasana , Mélanie Lafarge , Gilles Hochstetter
Engineering Fracture Mechanics, 2009, 76, pp.2766-2779. ⟨10.1016/j.engfracmech.2009.06.003⟩
Article dans une revue hal-00438800v1

Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)

Hedi Ben Hadj Hamouda , Lucien Laiarinandrasana , Roland Piques
Engineering Fracture Mechanics, 2007, 74, pp.2187-2204. ⟨10.1016/j.engfracmech.2006.10.009⟩
Article dans une revue hal-00154573v1

Viscoplastic behaviour of a medium density polyethylene (MDPE) : constitutive equations based on double nonlinear deformation model

Hedi Ben Hadj Hamouda , Lucien Laiarinandrasana , Roland Piques
International Journal of Plasticity, 2007, 23, pp.1307-1327. ⟨10.1016/j.ijplas.2006.11.007⟩
Article dans une revue hal-00154584v1
Image document

Effect of specimen geometries on the C∗ versus da/dt master curve for type 316L stainless steel

Lucien Laiarinandrasana , Moulay Rachid Kabiri , Magali Reytier
Engineering Fracture Mechanics, 2006, 73 (6), pp.726-737. ⟨10.1016/j.engfracmech.2005.10.004⟩
Article dans une revue hal-03359090v1
Image document

Damage and fracture of polyvinylidene fluoride (PVDF) at 20°C: Experiments and modelling

Mélanie Challier , Jacques Besson , Lucien Laiarinandrasana , Roland Piques
Engineering Fracture Mechanics, 2006, 73 (1), pp.79-90. ⟨10.1016/j.engfracmech.2005.06.007⟩
Article dans une revue hal-03359092v1

Specimen geometry effect on creep crack growth in 316L(N)

Lucien Laiarinandrasana , Moulay Kabiri
Fatigue and Fracture of Engineering Materials and Structures, 2006, 29, pp.145-155. ⟨10.1111/j.1460-2695.2006.00973.x⟩
Article dans une revue hal-00136795v1

A multi-scale analysis of the microstructure and the tensile mechanical behaviour of polyamide 66 fibre

Alba Marcellan , Anthony R. Bunsell , Lucien Laiarinandrasana , Roland Piques
Polymer, 2006, 47, pp.367-378. ⟨10.1016/j.polymer.2005.10.093⟩
Article dans une revue hal-00136818v1