Accéder directement au contenu

Loïc Daridon

20
Documents

Présentation

### Professeur à [l'Université de Montpellier](https://www.umontpellier.fr/) [LMGC/UMR 5508](http://www.lmgc.univ-montp2.fr/) Université de Montpellier – CC048 163 rue Auguste Broussonnet 34090 MONTPELLIER France Tel : 0 467 149 651 Fax : 0 467 143 923 Email : loic.daridon@umontpellier.fr ### Thèmes de Recherche : - **Fissuration et fragmentation à l'aide de modèle de zone cohésive.** - **Ecriture de loi de comportement dans le cadre de TPI.** - **Interaction Fluide-Structure pour les bateaux à foils.** ### Responsabilités : - **Chef du projet ASV-Mobula** de 2019 à 2021 - **Chef du [département](https://mecanique-fds.umontpellier.fr/ "Département ")**[ d’enseignement de Mécanique ](https://mecanique-fds.umontpellier.fr/ "Département ")de la F[aculté des Sciences](https://sciences.edu.umontpellier.fr/) de l’UM (de 2013 à 2019) : Responsabilité des équipes pédagogiques, techniques, administratives et financières du département. Le département compte 2 Biatss, 16 EC, 5 emplois temporaires (ATER, moniteurs), 10 vacataires qui interviennent dans deux parcours de licence et deux parcours de master, pour un total d’environ 530 étudiants inscrits dans nos Unités d’Enseignement. - **Directeur du MIST** depuis Septembre 2007. - **Correspondant** du Challenge course en cours pour la FDS en 2016. - **Responsable du parcours CMI** de septembre 2015 à 2016. - **Responsable de la licence** Science et Technique pour l’Ingénieur de 2005 à 2013 - **Responsable des stages** pour le département de mécanique de la FDS 2004 à 2013 - **Responsable des stages** et du recrutement pour le département M&I de polytech’ Montpellier de 2010 à 2013 ### Carrière : - **2020 : Conseillé scientifique après de la société [Neocean](https://www.neocean.com/overboat/)** - **2019/2021 : Accueil en délégation au CNRS.** - **Depuis 2004** : Professeur des universités en Mécanique du Solide à l’Université de Montpellier, – PEDR 2006-2010 – Passage PRCE en 2018. - **1994/2004** : Maître de Conférence en Mécanique du Solide à l’Université de Strasbourg – PEDR 2000-2004 – Passage 1ère Classe en 1998. - **2001/2003** : Délégation au CNRS à l’Institut de Mécanique des Fluides et des Solides de Strasbourg (UMR7507). - **1993/1994** : ATER en Mécanique du Solide et Calculs de Structures à l’Université de Lorraine. - **1990/1993** : Moniteur en Mathématiques pendant mon doctorat à l’Université de Lorraine ### Formation : - **2003** : Habilitation à Diriger des Recherches à l’Université de STRASBOURG. IMFS . ÉTUDE DE L’ENDOMMAGEMENT DANS LES MATÉRIAUX MÉTALLIQUES ET POLYMÈRES Date de soutenance : le 18 Décembre 2003 - **1990/1994** : Thèse de Doctorat en Mécanique à l’Université de METZ. LPMM MODÉLISATION DU PONT DE FIBRES LORS DU DÉLAMINAGE DES MATÉRIAUX COMPOSITES Date de soutenance : le 18 Février 1994 - **1989/1990** : DEA de Mathématiques Appliquées à l’Université de METZ - **1987/1989** : Licence et Maîtrise de Mathématiques à l’Université de TOULOUSE - **1985/1987** : DEUG de Sciences à l’Université de BREST
### Full Professor at [Montpellier University](https://www.umontpellier.fr/ "University Montpellier") [LMGC/UMR 5508](http://www.lmgc.univ-montp2.fr/) Université de Montpellier – CC048 163 rue Auguste Broussonnet 34090 MONTPELLIER France Tel : 0 467 149 651 Fax : 0 467 143 923 Email : loic.daridon@umontpellier.fr ### Research Themes : - **Crack propagation and fragmentation using cohesive zone modeling.** - **Modeling of constitutive beahavior in the context of TPI.** - **Fluid Structure Interaction for hydrofoil boats.** ### Responsabilities : - **Head of the Mechanics Department o**f the Faculty of Science of the University of Montpellier (since September 2013): Responsibility of the pedagogical, technical, administrative and financial teams of the department. The department has 2 Biatss, 16 EC, 5 temporary jobs (ATER, instructors), 10 temporary employees who work in two bachelor's and two master's courses, for a total of about 530 students enrolled in our Teaching Units**.** - **Director of MIST** since September 2007. - **Correspondent** of the Challenge course in progress for the FDS since September 2016. - **Member** on the faculty Board**.** - **Responsible** for the CMI cursus from September 2015 to 2016. - **Head of the Science and Technology degree** for engineers from 2005 to 2013 - **Head of internships for the mechanics department** of the FDS 2004 to 2013 - **Responsible for internships and recruitment** for the M&I department of polytech' Montpellier from 2010 to 2013 ### Employments : - **Since Septembre 2019 :** Full researcher at CNRS. - **Since 2004** : Full Professor at Montpellier University associated to the LMGC UMR5508. - **1994/2004** : Assistant Professor at Strasbourg University associated to the IMFS. - **2001/2003 :** Researcher at the CNRS in the "Institut de Mécanique des Fluides et des Solides" de Strasbourg (UMR7507). - **1993/1994** : ATER en Mécanique du Solide et Calculs de Structures à l’Université de Lorraine. - **1990/1993** : Moniteur en Mathématiques pendant mon doctorat à l’Université de Lorraine ### Education : - **2003** : Habilitation à Diriger des Recherches à l’Université de STRASBOURG. IMFS . ÉTUDE DE L’ENDOMMAGEMENT DANS LES MATÉRIAUX MÉTALLIQUES ET POLYMÈRES Date de soutenance : le 18 Décembre 2003 - **1990/1994** : Phd University de Lorraine . LPMM MODÉLISATION DU PONT DE FIBRES LORS DU DÉLAMINAGE DES MATÉRIAUX COMPOSITES Date de soutenance : le 18 Février 1994 - **1989/1990** : Master of applied Mathematics METZ - **1987/1989** : Bachelor of Mathematics TOULOUSE - BREST

Publications

spagano
Image document

Modélisation micromécanique de l'endommagement par approches cohésives : quelques aspects théoriques et numériques

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444894v1
Image document

Toward a micromechanical identification of cohesive parameters

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures - CFRAC 2015, Jun 2015, Cachan, France
Communication dans un congrès hal-02142044v1
Image document

Homogénéisation non linéaire d'un milieu `cohésif-volumique'. Critères pratiques pour la calibration des MZCs

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01706206v1

Cohesive Zone Models identification using an inverse homogenization method

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
Multiscale Analysis of the Impact of the Microstructure on Plasticity and Fracture in Interface-Dominated Materials, Grenoble Institute of Technology and the belgian IAP (Interuniversity Attraction Poles) network INTEMATE, Oct 2015, Houffalize, Belgium
Communication dans un congrès hal-02141680v1
Image document

A micromechanical-based model for the ductile cohesive-volumetric damage

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
3rd International workshop on physics based material models and experimental observations, Jun 2014, Izmir, Turkey
Communication dans un congrès hal-01009642v1
Image document

Comportement effectif d'un milieu cohésif : approche micromécanique

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717039v1

Imagerie thermomécanique et changements d'échelles pour l'identification de modèles de zones cohésives

Nawfal Blal , André Chrysochoos , Loïc Daridon , Yann Monerie , Stéphane Pagano
11ème colloque national en calcul des structures, CSMA2013, May 2013, Giens, France
Communication dans un congrès hal-00833329v1
Image document

Comportement effectif d'un milieu cohésif : approche micromécanique

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03439745v1

Overall elastoplastic behaviour of a cohesive medium

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Jun 2013, Prague, Czech Republic
Communication dans un congrès hal-00799663v1
Image document

Some Numerical and Mechanical Issues When Using Intrinsic Cohesive Approaches

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
European Solid Mechanics Conference (ESMC), Jul 2012, Austria
Communication dans un congrès hal-00665936v1
Image document

On mesh size to cohesive zone parameters relationships

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
ACOMEN 2011, Nov 2011, Liège, Belgium. pp.Cd-Rom
Communication dans un congrès hal-00800456v1
Image document

Modèle micromécanique d'endommagement basé sur des approches cohésives : bornes et relations micro-macro

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
20ème Congrès Français de Mécanique, 2011, Besançon, France. pp.Clé USB
Communication dans un congrès hal-00628031v1

Overall behavior of elastic materials with embedded cohesive zone models:rigorous bounds and mesh size-to-cohesive properties relationships

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
ESIS-TC Workshop on Numerical Methods for Materials Failure, 2011, France
Communication dans un congrès hal-00628017v1
Image document

Modèle micromécanique d'endommagement basé sur des approches cohésives

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00592873v1
Image document

Changement d'échelles et zoom structural

Loïc Daridon , David Dureisseix , Sylvain Garcia , Stéphane Pagano
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00596931v1