Skip to Main content
Number of documents

92

Joël BREARD


Journal articles50 documents

  • Jonathan Leboucher, Philippe Bazin, Didier Goux, Hussein El Siblani, Arnaud Travert, et al.. High-yield cellulose hydrolysis by HCl vapor: co-crystallization, deuterium accessibility and high-temperature thermal stability. Cellulose, Springer Verlag, In press, ⟨10.1007/s10570-020-03002-2⟩. ⟨hal-02470945⟩
  • Christophe Baley, Moussa Gomina, Joel Breard, Alain Bourmaud, Peter Davies. Variability of mechanical properties of flax fibres for composite reinforcement. A review. Industrial Crops and Products, Elsevier, 2019, pp.111984. ⟨10.1016/j.indcrop.2019.111984⟩. ⟨hal-02392721⟩
  • Christophe Baley, Moussa Gomina, Joël Bréard, Alain Bourmaud, Sylvain Drapier, et al.. Specific features of flax fibres used to manufacture composite materials. International Journal of Material Forming, Springer Verlag, 2018, ⟨10.1007/s12289-018-1455-y⟩. ⟨emse-02015952⟩
  • Benoît Duchemin, Moussa Gomina, Joël Bréard, Monica Francesca Pucci. Temperature effect on dynamic wetting of cellulosic substrates by molten polymers for composite processing. Composites Part A: Applied Science and Manufacturing, Elsevier, 2018, 114, pp.307 - 315. ⟨10.1016/j.compositesa.2018.08.031⟩. ⟨hal-01930601⟩
  • J. Breard, A. Saouab, G. Bouquet. Dependence of the Reinforcement Anisotropy on a Three Dimensional Resin Flow Observed by X-Ray Radioscopy. Journal of Reinforced Plastics and Composites, SAGE Publications, 2016, 18 (9), pp.814-826. ⟨hal-01942901⟩
  • Denis Lourdin, Jorge Peixinho, Joël Bréard, Bernard Cathala, Éric Leroy, et al.. Concentration driven cocrystallisation and percolation in all-cellulose nanocomposites. Cellulose, Springer Verlag, 2016, 23 (1), pp.529 - 543. ⟨10.1007/s10570-015-0805-x⟩. ⟨hal-01528950⟩
  • F. Destaing, Patricia Jouannot-Chesney, M. Gomina, J. Bréard. Choice between film or powder of PA11 for processing flax fiber-reinforced composites. Revue des Composites et des Materiaux Avances, 2016, 26 (3-4), pp.435-449. ⟨10.3166/RCMA.26.435-449⟩. ⟨hal-02184741⟩
  • Maxime Villiere, Sebastien Guéroult, Vincent Sobotka, Nicolas Boyard, Joel Breard, et al.. Dynamic saturation curve measurement in liquid composite molding by heat transfer analysis. Composites Part A: Applied Science and Manufacturing, Elsevier, 2015, 69, pp.255 - 265. ⟨10.1016/j.compositesa.2014.11.024⟩. ⟨hal-01938745⟩
  • Yanneck Wielhorski, Amine Ben Abdelwahed, Eric Arquis, Stéphane Glockner, Joël Bréard. Numerical Simulation of Bubble Formation and Transport in Cross-Flowing Streams. The Journal of Computational Multiphase Flows, Multi-Science Publishing, 2014, 6 (3), pp.299--312. ⟨10.1260/1757-482X.6.3.299⟩. ⟨hal-01943216⟩
  • Antoine Barbulée, Jean-Paul Jernot, Joël Bréard, Moussa Gomina. Damage to flax fibre slivers under monotonic uniaxial tensile loading. Composites Part A: Applied Science and Manufacturing, Elsevier, 2014, 64, pp.107--114. ⟨10.1016/j.compositesa.2014.04.024⟩. ⟨hal-01943212⟩
  • A Thuault, S Eve, D Blond, J Bréard, M Gomina. Effects of the hygrothermal environment on the mechanical properties of flax fibres. Journal of Composite Materials, SAGE Publications, 2014, 48 (14), pp.1699--1707. ⟨10.1177/0021998313490217⟩. ⟨hal-01943217⟩
  • Mohamed Amine Ben Abdelwahed, Yanneck Wielhorski, Laurent Bizet, Joël Bréard. Bubble formation and transport in T-junction for application to Liquid Composite Molding: Wetting effect. Journal of Composite Materials, SAGE Publications, 2014, 48 (1), pp.37--48. ⟨10.1177/0021998312467553⟩. ⟨hal-01943215⟩
  • A. Thuault, S. Eve, Patricia Jouannot-Chesney, J. Breard, M. Gomina. Interrelation Between the Variety and the Mechanical Properties of Flax Fibres. Journal of Biobased Materials and Bioenergy, 2013, 7 (5), pp.609-618. ⟨10.1166/jbmb.2013.1396⟩. ⟨hal-02473813⟩
  • Q.T. Nguyen, Emmanuelle Vidal-Sallé, Philippe Boisse, C.H. Park, Abdelghani Saouab, et al.. Mesoscopic scale analyses of textile composite reinforcement compaction. Composites Part B: Engineering, Elsevier, 2013, 44 (1), pp.231-241. ⟨hal-00785596⟩
  • P. Ouagne, Tariq Ouahbi, Chung Hae Park, Joël Bréard, Abdelghani Saouab. Continuous measurement of fiber reinforcement permeability in the thickness direction: Experimental technique and validation. Composites Part B: Engineering, Elsevier, 2013, 45 (1), pp.609-618. ⟨hal-00772661⟩
  • Yanneck Wielhorski, Amine Ben Abdelwahed, Joël Bréard. Theoretical Approach of Bubble Entrapment Through Interconnected Pores: Supplying Principle. Transport in Porous Media, Springer Verlag, 2013, 96 (1), pp.105-116. ⟨10.1007/s11242-012-0076-z⟩. ⟨hal-02166897⟩
  • E. Bretagne, J. Breard, Véronique Massardier-Jourdan, V. Verney. Ecomatériaux : les matériaux passent au vert. Matériaux & Techniques, EDP Sciences, 2012, 100 (5), pp.367 - 368. ⟨10.1051/mattech/2012051⟩. ⟨hal-01841890⟩
  • Yanneck Wielhorski, Mohamed Amine Ben Abdelwahed, Laurent Bizet, Joël Bréard. Wetting effect on bubble shapes formed in a cylindrical T-junction. Chemical Engineering Science, Elsevier, 2012, 84, pp.100-106. ⟨10.1016/j.ces.2012.08.008⟩. ⟨hal-02363675⟩
  • Mohamed Amine Ben Abdelwahed, Yanneck Wielhorski, Laurent Bizet, Joël Bréard. Characterisation of bubbles formed in a cylindrical T-shaped junction device. Chemical Engineering Science, Elsevier, 2012, 76, pp.206-215. ⟨10.1016/j.ces.2012.04.025⟩. ⟨hal-02363673⟩
  • Chung Hae Park, Aurélie Lebel, Abdelghani Saouab, Joël Bréard, Woo Il Lee. Modeling and simulation of voids and saturation in liquid composite molding processes. Composites Part A: Applied Science and Manufacturing, Elsevier, 2011, 42 (6), pp.658-668. ⟨hal-01942602⟩
  • Qianqian Chen, Philippe Boisse, Chung Hae Park, Abdelghani Saouab, Joel Breard. Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes. Composite Structures, Elsevier, 2011, 93, pp.1692-1703. ⟨hal-00938549⟩
  • Q. Chen, Philippe Boisse, Ch Park, Abdelghani Saouab, Joel Breard. Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes. Composite Structures, Elsevier, 2011, 93 (7), pp.1692-1703. ⟨hal-00935557⟩
  • Q. Chen, Philippe Boisse, Tarek Mabrouki, Abdelghani Saouab, Chung Hae Park, et al.. Comportement en cisaillement de materiaux composites carbone/pps et carbone/peek sous haute temperature. Revue des composites et des matériaux avancés, Lavoisier, 2011, 21, pp.105-117. ⟨hal-00938548⟩
  • E. Vidal-Sallé, Q.T. Nguyen, A. Charmetant, J. Bréard, E. Maire, et al.. Use of numerical simulation of woven reinforcement forming at mesoscale: Influence of transverse compression on the global response. International Journal of Material Forming, Springer Verlag, 2010, 3 (SUPPL. 1), pp.699-702. ⟨10.1007/s12289-010-0866-1⟩. ⟨hal-01813940⟩
  • P. Ouagne, Joel Breard, Tariq Ouahbi, Abdelghani Saouab, C.H. Park. Hydro-Mechanical Loading and Compressibility of Fibrous Media for Resin Infusion Processes. International Journal of Materials Forming, 2010, 3, pp.S1287-S1294. ⟨10.1007/s12289-009-0671-x⟩. ⟨hal-00655503⟩
  • Pierre Ouagne, Laurent Bizet, Christophe Baley, Joël Bréard. Analysis of the film stacking processing parameters for PLLA/flax fibre biocomposites. Journal of Composite Materials, SAGE Publications, 2010, 44 (10), pp.1201-1215. ⟨10.1177/0021998309349019⟩. ⟨hal-00655529⟩
  • Pierre Ouagne, Joel Breard. Continuous transverse permeability of fibrous media.. Composites Part A: Applied Science and Manufacturing, Elsevier, 2010, 41, pp.22-28. ⟨hal-00655500⟩
  • Q. Chen, P. Boisse, N. Hamila, A. Saouab, C. Park, et al.. A Finite Element Method for the Forming Simulation of the Reinforcements of Thermoplastic Composite. International Journal of Material Forming, Springer Verlag, 2009, 2 (S1), pp.213-216. ⟨hal-01942767⟩
  • Qq Chen, Abdelghani Saouab, Philippe Boisse, Ch Park, Joël Bréard. Woven thermoplastic composite forming simulation with solid-shell element method. International Journal for Simulation and Multidisciplinary Design Optimization, EDP sciences/NPU (China), 2009, 3, pp.337 - 341. ⟨hal-00935544⟩
  • Chung Hae Park, Abdelghani Saouab, Joël Bréard, Woo Suck Han, Alain Vautrin, et al.. Integrated optimization for weight, Performance and cost of composite structures. Composites Science and Technology, Elsevier, 2009, 69 (7-8), pp.1101-1107. ⟨10.1016/j.compscitech.2009.02.002⟩. ⟨hal-00293750⟩
  • Chung Hae Park, Abdelghani Saouab, Joël Bréard, Woo Suck Han, Alain Vautrin, et al.. An integrated optimisation for the weight, the structural performance and the cost of composite structures. Composites Science and Technology, Elsevier, 2009, 69 (7-8), pp.1101-1107. ⟨hal-01942813⟩
  • K. Charlet, J.P. Jernot, M. Gomina, J. Bréard, C. Morvan, et al.. Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties. Composites Science and Technology, Elsevier, 2009, 69 (9), pp.1399-1403. ⟨hal-00404015⟩
  • Pierre Ouagne, Joel Breard, Tariq Ouahbi, Chung Hae Park, Abdelghani Saouab, et al.. Hydromechanical loading and compressibility of fibrous reinforcements. International Journal of Materials Forming, 2008, pp.933-936. ⟨hal-00655505⟩
  • P. Ouagne, J. Breard, T. Ouahbi, C. Park, A. Saouab, et al.. Hydromechanical loading and compressibility of fibrous reinforcements. International Journal of Material Forming, Springer Verlag, 2008, 1 (S1), pp.933-936. ⟨hal-01942827⟩
  • P. Ouagne, J. Breard, T. Ouahbi, C. Park, A. Saouab, et al.. Hydromechanical loading and compressibility of fibrous reinforcements. International Journal of Material Forming, Springer Verlag, 2008, 1 (S1), pp.933-936. ⟨hal-01942762⟩
  • C. Park, J. Breard, A. Saouab, W. Lee. Unified saturation and micro-macro voids method in Liquid Composite Molding. International Journal of Material Forming, Springer Verlag, 2008, 1 (S1), pp.937-940. ⟨hal-01942820⟩
  • P. Ouagne, L. Bizet, J. Breard, C. Baley. Analyse des couplages hydromécaniques sur renfort à base de fibres de lin. Application aux procédés d'infusion.. Revue des composites et des matériaux avancés, Lavoisier, 2008, 18 (2), pp.191-196. ⟨hal-00494910⟩
  • L. Bizet, P. Ouagne, J. Breard, C. Baley, J.P. Jernot, et al.. Préformes en mats de fibres de lin : perméabilité transversale et constante de Kozeny.. Revue des composites et des matériaux avancés, Lavoisier, 2008, 18 (2), pp.197-202. ⟨hal-00494865⟩
  • Tariq Ouahbi, Abdelghani Saouab, Joël Bréard, Pierre Ouagne, Sylvain Chatel. Modelling of hydro-mechanical coupling in infusion processes. Composites Part A: Applied Science and Manufacturing, Elsevier, 2007, 38 (7), pp.1646-1654. ⟨10.1016/j.compositesa.2007.03.002⟩. ⟨hal-02469929⟩
  • Tariq Ouahbi, Abdelghani Saouab, Joël Bréard, Pierre Ouagne, Sylvain Chatel. Modelling of hydro-mechanical coupling in infusion processes. Composites Part A: Applied Science and Manufacturing, Elsevier, 2007, 38 (7), pp.1646-1654. ⟨hal-01942856⟩
  • Tariq Ouahbi, Abdelghani Saouab, Joël Bréard, Pierre Ouagne, Sylvain Chatel. Modelling of hydro-mechanical coupling in infusion processes. Composites Part A: Applied Science and Manufacturing, Elsevier, 2007, 38, pp.1646-1654. ⟨hal-00655527⟩
  • K. Charlet, Christophe Baley, C. Morvan, J.P. Jernot, M. Gomina, et al.. Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites. Composites Part A: Applied Science and Manufacturing, Elsevier, 2007, 38 (8), pp.1912-1921. ⟨hal-00399311⟩
  • Abdelghani Saouab, Joël Bréard. Analytical Modeling of CRTM and RTM Processes. Part II: Applications to the Analysis of the Process. International Journal of Forming Processes, 2006, 9 (3), pp.345-364. ⟨hal-01942864⟩
  • Abdelghani Saouab, Joël Bréard. Analytical Modeling of CRTM and RTM Processes. Part I: General Mathematical Development. International Journal of Forming Processes, 2006, 9 (3), pp.309-344. ⟨hal-01942878⟩
  • J. Breard, L. Bizet, N. Montrelay, C. Baley. Comparaison des propriétés de composites mat de verre/polyester et lin/polyester pour faisabilité par procédé RTM.. Revue des composites et des matériaux avancés, Lavoisier, 2006, 16 (1), pp.101-113. ⟨hal-00494662⟩
  • Joël Bréard, Abdelghani Saouab, Guy Bouquet. Numerical simulation of void formation in LCM. Composites Part A: Applied Science and Manufacturing, Elsevier, 2003, 34 (6), pp.517-523. ⟨hal-01942929⟩
  • Rodolphe Le Riche, Abdelghani Saouab, Joël Bréard. Coupled compression RTM and composite layup optimization. Composites Science and Technology, Elsevier, 2003, Volume 63 (Issue 15), pp.Pages 2277-2287. ⟨10.1016/S0266-3538(03)00195-7⟩. ⟨emse-00686920⟩
  • Abdelghani Saouab, Rodolphe Le Riche, Joël Bréard. Couplage procédé-propriétés : étude d'une plaque composite. Revue des composites et des matériaux avancés, Lavoisier, 2002, VOL 12/3, pp.515-529. ⟨10.3166/rcma.12.515-529⟩. ⟨emse-00686944⟩
  • A. Saouab, J. Breard, P. Lory, B. Gardarein, G. Bouquet. Injection simulations of thick composite parts manufactured by the RTM process. Composites Science and Technology, Elsevier, 2001, 61 (3), pp.445-451. ⟨hal-01942908⟩
  • J. Breard, A. Saouab, G. Bouquet. Mesure de la perméabilité spatiale d'un renfort tridimensionnel pour matériaux composites à matrice polymère. European Physical Journal: Applied Physics, EDP Sciences, 1998, 1 (2), pp.269-278. ⟨hal-01942892⟩

Conference papers38 documents

  • Valentin Rougier, Moussa Gomina, Patricia Jouannot-Chesney, Joël Bréard. Ecoulements capillaires et couplages hydromécaniques dans les milieux fibreux à double échelle de pores. 21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. ⟨hal-02420713⟩
  • Monica Francesca Pucci, Benoît Duchemin, Moussa Gomina, Joël Bréard. Etude de la dynamique de mouillage et démouillage de polymères à l'état fondu pour l'élaboration de biocomposites. 21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. ⟨hal-02420762⟩
  • Moussa Gomina, Antoine Barbulee, Joel Breard, Davy Duriatti. Analyse et modélisation de l'étirage de rubans de fibres végétales : exemple du lin pour des applications composites. 20èmes journées Annuelles de la Société Ouest-Africaine de Chimie - SOACHIM, Aug 2019, Bamako, Mali. ⟨hal-02395154⟩
  • Moussa Gomina, Antoine Barbulee, Joel Breard, Davy Duriatti. MODELING DRAW PROCESS OF FLAX FIBER. 4 th INTERNATIONAL CONFERENCE ON NATURAL FIBERS 4 th ICNF -Smart Sustainable Solutions, Jul 2019, Porto, France. ⟨hal-02395076⟩
  • Moussa Gomina, Antoine Barbulee, Joel Breard, Davy Duriatti. Analyse prédictive du processus d'étirage de rubans de fibres végétales : exemple du lin. 21èmes Journéees Nationales sur les Composites, Jul 2019, Bordeaux, France. ⟨hal-02394002⟩
  • Monica Pucci, Benoît Duchemin, Moussa Gomina, Joel Breard. Etude de la dynamique de mouillage et démouillage de polymères à l'état fondu pour l'élaboration de biocomposites Study of dynamic wetting and dewetting phenomena with molten polymers for biocomposite processing. 21èmes Journées Nationales sur les Composites, Jul 2019, Bordeaux, France. ⟨hal-02394023⟩
  • Valentin Rougier, Moussa Gomina, Patricia Jouannot-Chesney, Joel Breard. Ecoulement capillaire et couplage hydromécanique dans les milieux fibreux à double échelle de pores Capillary flows and hydromechanical couplings in double-scale fibrous media. 21èmes Journées Nationales sur les Composites, Jul 2019, Bordeaux, France. ⟨hal-02394062⟩
  • M Pucci, B. Duchemin, M. Gomina, J. Breard. IDENTIFICATION OF KEY PARAMETERS IN DYNAMIC WETTING AND DEWETTING PHENOMENA WITH MOLTEN POLYMERS FOR COMPOSITE PROCESSING. THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS, May 2019, Luleå, Kulturens Hus, Sweden. ⟨10.1186/s40192-015-0032-1⟩. ⟨hal-02394157⟩
  • H.R. Dana, M. Gomina, J. Bréard, G. Orange. Mechanical behaviour of glass fiber weaven UD/high fluidity PA-based polymers for automotive applications. 19th International ESAFORM Conference on Material Forming, 2016, Nantes, France. pp.020001, ⟨10.1063/1.4963405⟩. ⟨hal-02184723⟩
  • G. Cazaux, L. Bizet, J. Bréard, M. Gomina, E. Syerko, et al.. Permeability enhancement with different glass fiber quasi-UD structure arrangements for RTM-TP process. 20th International Conference on Composite Materials, 2015, Copenhagen, Denmark. ⟨hal-02184166⟩
  • Maxime Villière, Xavier Tardif, Sebastien Guéroult, Vincent Sobotka, Nicolas Boyard, et al.. A Heat Flux Sensor to Monitor Composite Manufacturing Processes. EWSHM - 7th European Workshop on Structural Health Monitoring, IFFSTTAR, Inria, Université de Nantes, Jul 2014, Nantes, France. ⟨hal-01020393⟩
  • Romain Agogue, Pierre Ouagne, Damien Soulat, Chung Hae Park, Joël Bréard, et al.. INJECTION OF A COMPLEX PREFORM BY RTM. OPTIMISATION OF A MOULD DESIGN AND PROCESS PARAMETERS. FPCM 11, Jul 2012, New Zealand. pp.8. ⟨hal-00772656⟩
  • Mohamed Amine Ben Abdelwahed, Yanneck Wielhorski, Laurent Bizet, Joël Bréard. VOID PREDICTION DURING LIQUID COMPOSITE MOLDING PROCESSES: WETTING AND CAPILLARY PHENOMENA. 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Jun 2012, Venise, Italy. ⟨hal-00718684⟩
  • Yanneck Wielhorski, Mohamed Amine Ben Abdelwahed, Laurent Bizet, Joël Bréard. THEORETICAL AND EXPERIMENTAL MODELLING OF BUBBLE FORMATION WITH CONNECTED CAPILLARIES IN LIQUID COMPOSITE MOULDING PROCESSES. 11th International Conference Flow Processing in Composite Materials, Jul 2012, Auckland, New Zealand. ⟨hal-00718687⟩
  • Adrien Leygue, Francisco Chinesta, J. Breard. Autour de la Saturation dans la Mise en Forme de Composites. GDR MIC Week, 2011, Le Havre, France. ⟨hal-01007929⟩
  • Tariq Ouahbi, Pierre Ouagne, Chung Hae Park, Joël Bréard. SIMULTANEOUS IDENTIFICATION OF PREFORM PERMEABILITY AND COMPRESSIBILITY. 18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Aug 2011, JEJU, South Korea. pp.August 2011. ⟨hal-00655547v2⟩
  • Mohamed Amine Ben Abdelwahed, Yanneck Wielhorski, Laurent Bizet, Joël Bréard. BUBBLE SHAPE AND TRANSPORT DURING LCM PROCESSES: EXPERIMENTAL MODELING IN A T-JUNCTION TUBE. 18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Aug 2011, Jeju, South Korea. ⟨hal-00718683⟩
  • Mouna Zaidani, Tariq Ouahbi, Chung-Hae Park, Abdelghani Saouab, Joël Bréard. Modélisation du couplage hydromécanique en milieu fibreux déformable non-saturé: Application aux procédés d'infusion.. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.213. ⟨hal-00596995⟩
  • Pierre Ouagne, Joël Bréard. INFLUENCE OF THE COMPACTION SPEED ON THE TRANSVERSE CONTINUOUS PERMEABILITY. The 10th International Conference on Flow Processes in Composite Materials (FPCM10), Jul 2010, Switzerland. pp.july 2010. ⟨hal-00655552⟩
  • Pierre Ouagne, Damien Soulat, Romain Agogué, Chung Hae Park, L. Bizet, et al.. INJECTION OF A COMPLEX PREFORM BY RTM PROCESS.. The 10th International Conference on Flow Processes in Composite Materials (FPCM10), Jul 2010, Ascona, Switzerland. pp.July 2010. ⟨hal-00655550⟩
  • Estelle Bretagne, Joel Breard. Les éco-matériaux : enjeux, perspectives. Journées sc. « Fiabilité des structures à base polymères, biopolymères, écopolymères », conférence plénière, May 2010, Metz, France. ⟨hal-01842384⟩
  • Quang Thanh Nguyen, Emmanuelle Vidal-Sallé, Philippe Boisse, Joël Bréard, Bertrand Laine. Experimental and numerical analysis of the deformation of a woven composite reinforcement. Consequences on the permeability. FPCM 2010, Jul 2010, Ascona, Switzerland. 8 p. ⟨hal-00850062⟩
  • Emmanuelle Vidal-Sallé, Quang Thanh Nguyen, Adrien Charmetant, Joël Bréard, Eric Maire, et al.. Use of numerical simulation of woven reinforcementforming at mesoscale: Influence of transversecompression on the global response. 13th ESAFORM Conference, Apr 2010, Brescia, Italy. 6 p. ⟨hal-00850090⟩
  • C. Baley, J. Breard. Matériaux composites et fibres végétales. Enjeux du développement. Congrès Cipalin (syndicat des professionnels du lin), Jan 2009, Amiens, France. ⟨hal-00600359⟩
  • Aurélie Lebel, Chung-Hae Park, Saouab Abdelghani, Joel Breard, Florent Bouillon. Modélisation numérique de la formation des bulles d'air dans les matériaux composites = Numeric modelisation of air bubbles formation in composites materials. JNC16, Jun 2009, Toulouse, France. 8 p. ⟨hal-00429977⟩
  • Q.Q. Chen, Philippe Boisse, Nahiene Hamila, A. Saouab, C.H. Park, et al.. A Finite Element Method for the Forming Simulation of the Reinforcements of Thermoplastic Composite.. ESAFORM 2009, Apr 2009, Twente, Netherlands. pp.213-216. ⟨hal-00515861⟩
  • Tariq Ouahbi, Chung Hae Park, Abdelghani Saouab, Pierre Ouagne, Joël Bréard, et al.. IDENTIFICATION OF PREFORM COMPRESSIBILITY BY INVERSE METHOD. FPCM-9 (2008) The 9th International Conference on Flow Processes in Composite Materials Montréal (Québec), Canada 8 ~ 10 July 2008, Jul 2008, Montréal, Canada. pp.1-8. ⟨hal-00658662⟩
  • K. Charlet, J.P. Jernot, M. Gomina, C. Baley, J. Breard. How the morphology of a flax fibre influences its mechanical behaviour. 13th European Conference on Composite Materials, Jun 2008, Stockholm, Sweden. ⟨hal-00495522⟩
  • L. Bizet, P. Ouagne, J. Breard, C. Baley, J.P. Jernot, et al.. Transverse permeability and Kozeny constant in flax fiber mat preforms. FPCM-9 (2008) The 9th International Conference on Flow Processes in Composite Materials, Jul 2008, Montréal (Québec), Canada. ⟨hal-00495524⟩
  • K. Charlet, J.P. Jernot, M. Gomina, C. Baley, L. Bizet, et al.. Relationship between the morphology and the mechanical behaviour of a flax fibre. ICCM16, Jul 2007, Kyoto, Japan. ⟨hal-00495268⟩
  • K. Charlet, J.P. Jernot, M. Gomina, C. Morvan, C. Baley, et al.. Relation entre la microstructure et le comportement mécanique d'une fibre de lin. JNC 15 /AMAC, Jun 2007, marseille, France. pp.289-296. ⟨hal-00495271⟩
  • L. Bizet, P. Ouagne, J. Breard, C. Baley, J.P. Jernot, et al.. Préformes en mats de fibres de lin : perméabilité transversale et constante de Kozeny. Journée Scientifique et Technique (AMAC), "Renforcement des polymères par des fibres végétales / EcoMatériaux ", Oct 2007, Caen, France. ⟨hal-00497054⟩
  • C. Baley, J. Breard. Tensile behavior of a single flax fibre.. 12th European Conference on Composite Materials (ECCM 12), Aug 2006, Biarritz, France. ⟨hal-00495091⟩
  • C. Morvan, C. Baley, J. Breard, J.P. Jernot, M. Gomina. Relationship between the structure of flax fibres and their mechanical properties: effect of the position of the fibres in the stem. NAROSSA 2006: 12th International Conference for Renewable Resources and Plant Biotechnology, Jun 2006, Magdeburg, Germany. ⟨hal-00495094⟩
  • K. Charlet, C. Morvan, C. Baley, J.P. Jernot, M. Gomina, et al.. Flax fibre reinforced composites. Influence of the fibre position in the stem on its mechanical, chemical and morphological properties. 12th European Conference on Composite Materials (ECCM 12), Aug 2006, Biarritz, France. ⟨hal-00495169⟩
  • C.-H. Park, A. Saouab, J. Breard, Rodolphe Le Riche. Simple models for mold filling stage in liquid composite molding and their applications to structure-process coupled optimization. 8th Int. Conf. on Flow Processes in Composite Materials (FPCM8),, Jul 2006, Douai, France. pp.289-296. ⟨hal-00297131⟩
  • Abdelghani Saouab, Rodolphe Le Riche, J. Breard. Coupled Optimization Processes-Properties of Composite Plates. 13ièmes Journées Nationales des Composites, JNC13, Mar 2003, Strasbourg, France. pp.101-110. ⟨emse-00691650⟩
  • Abdelghani Saouab, Rodolphe Le Riche, J. Breard. Couplage Procédés-Propriétés: analyse statistique d'une plaque composite. Journée Scientifique et Technique (JST - AMAC) : Mise en Forme des Matériaux Composites, Oct 2002, Paris, France. ⟨emse-00691659⟩

Poster communications1 document

  • Valentin Rougier, Monica Francesca Pucci, Moussa Gomina, Joel Breard. Dynamic wetting of cellulosic substrates by model liquids. 14èmes Journées d'Etude des Milieux Poreux, Oct 2018, Nantes, France. ⟨hal-02395058⟩

Preprints, Working Papers, ...3 documents

  • Pierre Lecanu, Joël Bréard, Dominique Mouazé. Theoretical calculation of the power of wind turbine or tidal turbine. 2020. ⟨hal-01982516v8⟩
  • Pierre Lecanu, Joel Breard, Dominique Mouazé. Operating principle of an active lift turbine with controlled displacement. 2018. ⟨hal-01852010⟩
  • Pierre Lecanu, Joel Breard, Dominique Mouazé. Simplified theory of an active lift turbine with controlled displacement. 2016. ⟨hal-01300531v2⟩