Accéder directement au contenu

Mots-clés

Inverse method Interferometry Error assessment Analyse d'images Skin DIC Interface pressure Identification Composites Numerical simulation Finite element Image analysis Fringe projection Knee braces Levenberg-Marquardt Low back pain Uncertainty analysis Digital image correlation Displacement resolution Lumbar belt
› Liste complète

Identifiants chercheur

Nombre de documents

99

Ingénieur et Docteur en mécanique, Professeur de l'Institut Mines-Télécom

Position actuelle (depuis Janv. 2012)

Professeur à l'École Nationale Supérieure des Mines de Saint-Étienne (ENSM-SE), Centre Ingénierie et Santé (CIS). Membre de l'UR INSERM1059SAINBIOSE

Diplômes et titres

2005 : Habilitation à Diriger des Recherches, Université de Saint-Étienne, soutenue le 9 décembre.

1999 : Doctorat de Mécanique de l'INSA Lyon soutenu le 21 décembre, mention très honorable avec les félicitations du jury (directeurs de thèse : Ph. Vergne / L. Flamand).

1994 : Diplôme d'Études Approfondies de Mécanique de l'INSA Lyon, mention Bien (direction : M.C. Baietto-Dubourg).

 1994 : Ingénieur INSA de Lyon, option Génie Mécanique et Développement.

 Langues

 Anglais : lu-écrit-parlé, Espagnol : lu-écrit-parlé

 

 Enseignement

Cours actuels

  • Niveau Master : méthodes expérimentales (CM/TD/TP) ; biomécanique (TP) ; biostatistiques (CM/TD/TP) ; Dispositifs médicaux (CM/TD/TP) ; accompagnement personnalisé des élèves du cursus Ingénieur Civil des Mines ; suivi de projets
  • Niveau Doctorat : mécanique expérimentale (CM/TP)

Publications à caractère pédagogique

Ouvrages

Molimard J. (2016) Experimental mechanics of solids and structures, Wiley-Blackwell, 176 p.

Molimard J. (2016)Mécanique expérimentale des solides et des structures, ISTE, 160 p.

Chapitres d’ouvrage

Molimard, J. & Surrel, Y. (2012) Grid Method, Moiré and Deflectometry, Full-Field Measurements and Identification in Solid Mechanics, Grediac, M. & Hild, F. (Eds.), Wiley, 32 p.

Molimard, J. & Surrel, Y. (2011) Méthode des grilles, moiré et déflectométrie, Mesures de champs et identification en mécanique des solides, Grediac, M. & Hild, F. (Eds.), Hermès Lavoisier, 28p.

Communications à des congrès

Surrel J., Molimard J., Measurement of a surface profile with maximum accuracy, using a temporal phase-stepping, Education & Training in Optics ETOP 2005, Marseille, Octobre 2005

Molimard J., Atelier Thématique Photomécanique, Mesures optiques de champs en mécanique expérimentale des matériaux et de structures, Journées de l’Ingéniérie et de l’Innovation Pédagogique, St-Étienne, 8-10 Mars 2005

 

Recherche

Animation de la recherche

Reviewer pour Optics and Laser in Engineering, Experimental Mechanics, Strain, Journal of Biomechanical Engineering, Prosthetics & Orthotics International, PLOS

Chairman pour les conférences de la Society for Experimental Mechanics, European Conference on Experimental Mechanics, Photomechanics …

Organisateur de session au World Congress on Biomechanics, Dublin 2018

Membre du GdR CNRS 3570 Mecabio, membre de la société de biomécanique, de l'European Society of Biomecanics et de l'American Society of Mechanical Engineers

Invitations

Professeur invité à l’Université de Cordoba, Argentine (2018), Postech, Corée (2016), Rosario, Argentine (2008)

Prix et distinctions

Prix du meilleur poster de jeune chercheur, FS2IC, Monaco, 2008

Hetteny award du meilleur article, Society for Experimental Mechanics, 2009

Prix du meilleur poster, ElyT 2015

Conférences invités

53ème congrès du Collège Français de Pathologie Vasculaire, 2019, Paris, France

Congrès RIA-Optilas, 2019, 23-27 Sept, Cancun, Mexique

ATTX2019, 2019, Dusseldorf, Allemagne

31ème Congrès de la Société Française de Médecine Physique et de Réadaptation, 2016, Saint-Etienne, France

Journées scientifiques franco-maghrébines, Outils et méthodes de caractérisations scientifiques de matériaux complexes, 2014, Hammamet, Tunisie

Article dans une revue48 documents

  • Rébecca Bonnaire, Woo Suck Han, Reynald Convert, Paul Calmels, Jérôme Molimard. Feasibility of a Full-Field Measurements-Based Protocol for the Biomechanical Study of a Lumbar Belt: A Case Study. Biomechanics, MDPI, 2022, 2 (2), pp.174-188. ⟨10.3390/biomechanics2020015⟩. ⟨hal-03649504⟩
  • Nicolas Kroupa, Baptiste Pierrat, Woo-Suck Han, Sylvain Grange, Florian Bergandi, et al.. Bone Position and Ligament Deformations of the Foot From CT Images to Quantify the Influence of Footwear in ex vivo Feet. Frontiers in Bioengineering and Biotechnology, Frontiers, 2020, 8, ⟨10.3389/fbioe.2020.00560⟩. ⟨hal-02929904⟩
  • Víctor Andrès Acosta-Santamaría, María Flechas García, Jérôme Molimard, Stéphane Avril. Characterization of chemoelastic effects in arteries using digital volume correlation and optical coherence tomography. Acta Biomaterialia, Elsevier, 2019, ⟨10.1016/j.actbio.2019.11.049⟩. ⟨hal-02405884⟩
  • Cristina Cavinato, Jérome Molimard, Nicolas Curt, Salvatore Campisi, Laurent Orgéas, et al.. Does the Knowledge of the Local Thickness of Human Ascending Thoracic Aneurysm Walls Improve Their Mechanical Analysis?. Frontiers in Bioengineering and Biotechnology, Frontiers, 2019, 7, ⟨10.3389/fbioe.2019.00169⟩. ⟨hal-02377467⟩
  • Fanette Chassagne, Emilie Benoist, Pierre Badel, Reynald Convert, Laurence Schacher, et al.. Characterization of Fabric-to-Fabric Friction: Application to Medical Compression Bandages. Autex Research Journal, Lodz University of Technology, Faculty of Material Technologies and Textile Design, 2019, ⟨10.2478/aut-2019-0050⟩. ⟨hal-02380169⟩
  • Fanette Chassagne, Jérôme Molimard, Reynald Convert, Pascal Giraux, Pierre Badel. Numerical Model Reduction for the Prediction of Interface Pressure Applied by Compression Bandages on the Lower Leg. IEEE Transactions on Biomedical Engineering, Institute of Electrical and Electronics Engineers, 2018, 65 (2), pp.449-457. ⟨10.1109/TBME.2017.2774598⟩. ⟨hal-02318360⟩
  • David Wheeler, Jérôme Molimard, Nicolas Devaux, David Philippon, Nicolas Fillot, et al.. A Generalized Differential Colorimetric Interferometry Method: Extension to the Film Thickness Measurement of Any Point Contact Geometry. Tribology Transactions, Taylor & Francis, 2018, 61 (4), pp.648 - 660. ⟨10.1080/10402004.2017.1386809⟩. ⟨hal-01832680⟩
  • S. Tupin, J. Molimard, V. Cenizo, T. Hoc, B. Sohm, et al.. Multiscale approach to characterize mechanical properties of tissue engineered skin. Annals of Biomedical Engineering, Springer Verlag, 2016, 44 (9), pp.2851-2862. ⟨10.1007/s10439-016-1576-8⟩. ⟨hal-01435988⟩
  • Fanette Chassagne, Jérome Molimard, Reynald Convert, Pascal Giraux, Pierre Badel. Numerical Approach for the Assessment of Pressure Generated by Elastic Compression Bandage. Annals of Biomedical Engineering, Springer Verlag, 2016, 44, pp.3096 - 3108. ⟨10.1007/s10439-016-1597-3⟩. ⟨hal-01380275⟩
  • B. Pierrat, R. Oullion, J. Molimard, L. Navarro, M. Combreas, et al.. Characterisation of in-vivo mechanical action of knee braces regarding their anti-drawer effect. Knee, Elsevier, 2015, 22 (2), pp.80-87. ⟨10.1016/j.knee.2014.12.001⟩. ⟨hal-01137491⟩
  • Fanette Chassagne, Frédéric Martin, Pierre Badel, Reynald Convert, Pascal Giraux, et al.. Experimental investigation of pressure applied on the lower leg by elastic compression bandage. Annals of Biomedical Engineering, Springer Verlag, 2015, 43 (12), pp.2967-2977. ⟨10.1007/s10439-015-1352-1⟩. ⟨hal-01251853⟩
  • Mathieu Taroni, Jérôme Molimard, Thibaut Cachon, Eric Viguier, Claude Carozzo. Robert Jones bandage pressure range assessment using a pressure mapping system and application to band calibration. Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 2015, Special Issue: French Society of Biomechanics, 18 (Suppl.1), pp.2068-2069. ⟨10.1080/10255842.2015.1069560⟩. ⟨hal-01275932⟩
  • Rébecca Bonnaire, Woo Suck Han, Jérôme Molimard, Paul Calmels, Reynald Convert. Biomechanical analysis and modeling of lumbar belt: parametric study. Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 2014, 17 suppl 1, pp.62 - 63. ⟨10.1080/10255842.2014.931123⟩. ⟨emse-01108661⟩
  • Baptiste Pierrat, Jérôme Molimard, Laurent Navarro, Stéphane Avril, Paul Calmels. Evaluation of the mechanical efficiency of knee orthoses: a combined experimental-numerical approach. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, SAGE Publications, 2014, 228 (6), pp.533-546. ⟨10.1177/0954411914533944⟩. ⟨hal-01054872⟩
  • Jérôme Molimard, Laurent Navarro. Uncertainty on fringe projection technique: a Monte-Carlo-based approach. Optics and Lasers in Engineering, Elsevier, 2013, 51 (7), pp.840-847. ⟨10.1016/j.optlaseng.2013.01.023⟩. ⟨hal-01024470⟩
  • Gaetan Boyer, Jérôme Molimard, Mohamed Ben Tkaya, Hassan Zahouani, Marc Pericoi, et al.. Assessment of the in-plane biomechanical properties of human skin using a finite element model updating approach combined with an optical full-field measurement on a new tensile device. Journal of the mechanical behavior of biomedical materials, Elsevier, 2013, 27, pp.273-282. ⟨10.1016/j.jmbbm.2013.05.024⟩. ⟨hal-00911079⟩
  • Claudiu Badulescu, Michel Bornert, J.C. Dupré, P. Esquis, Michel Grediac, et al.. Demodulation of spatial carrier images: Performance analysis of several algorithms using a single image. Experimental Mechanics, Society for Experimental Mechanics, 2013, 53 (8), pp.1357-1370. ⟨10.1007/s11340-013-9741-6⟩. ⟨hal-00834981⟩
  • Christian Gogu, W. Yin, Raphael Haftka, Peter Ifju, Jérôme Molimard, et al.. Bayesian Identification of Elastic Constants in Multi-Directional Laminate from Moiré Interferometry Displacement Fields. Experimental Mechanics, Society for Experimental Mechanics, 2013, 53 (4), pp.629-635. ⟨10.1007/s11340-012-9671-8⟩. ⟨emse-00728776⟩
  • Michel Bornert, Fabrice Brémand, Pascal Doumalin, Jean-Christophe Dupré, Marina Fazzini, et al.. Addendum to: Assessment of Digital Image Correlation Measurement Errors: Methodology and Results [Experimental Mechanics 49(3)]. Experimental Mechanics, Society for Experimental Mechanics, 2013, page 1. ⟨10.1007/s11340-012-9704-3⟩. ⟨hal-01133567⟩
  • Jérôme Molimard, Laurent Navarro. Uncertainty on gringe projection technique: A Monte-Carlo-based approach. Optics and Lasers in Engineering, Elsevier, 2013, 51 (7), pp.840-847. ⟨10.1016/j.optlaseng.2013.01.023⟩. ⟨hal-00834909⟩
  • Daniel Zymelka, Sébastien Saunier, Dominique Goeuriot, Jérôme Molimard. Densification and thermal gradient evolution of alumina during microwave sintering at 2.45 GHz. Ceramics International, Elsevier, 2013, 39 (3), pp.3269-3277. ⟨10.1016/j.ceramint.2012.10.015⟩. ⟨hal-00835466⟩
  • Peng Wang, Sylvain Drapier, Jérôme Molimard, Alain Vautrin, Jean-Christophe Minni. Numerical and experimental analyses of resin infusion manufacturing processes of composite materials. Journal of Composite Materials, Elsevier, 2012, 46 (13), pp.1617-1631. ⟨10.1177/0021998311421990⟩. ⟨hal-00736359⟩
  • Peng Wang, Jérôme Molimard, Sylvain Drapier, Alain Vautrin, Jean-Christophe Minni. Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors. Journal of Composite Materials, SAGE Publications, 2012, 46 (6), pp.691-706. ⟨10.1177/0021998311410479⟩. ⟨hal-00688460⟩
  • Gaetan Boyer, Cyril Pailler-Mattéi, Jérôme Molimard, Marc Pericoi, Sabine Laquieze, et al.. Non contact method for in vivo assessment of skin mechanical properties for assessing effect of ageing. Medical Engineering and Physics, Elsevier, 2012, 34 (2), pp.172-178. ⟨10.1016/j.medengphy.2011.07.007⟩. ⟨hal-00837958⟩
  • Wajdi Dandach, Jérôme Molimard, Pascal Picart. Direct strain and slope measurement using 2D DSPSI Title. Advanced Materials Research, Trans Tech Publications, 2011, 324, pp.384-387. ⟨10.4028/www.scientific.net/AMR.324.384⟩. ⟨hal-00626063⟩
  • Jérôme Molimard. Implementation of the direct evaluation of strains using a phase analysis code for random patterns. Optics and Lasers in Engineering, Elsevier, 2011, 49 (9), pp.1194-1200. ⟨10.1016/j.optlaseng.2011.04.016⟩. ⟨hal-00620854⟩
  • Daniel Zymelka, Sébastien Saunier, Jérôme Molimard. Contactless Monitoring of Shrinkage and Temperature Distribution during Hybrid Microwave Sintering. Advanced Engineering Materials, Wiley-VCH Verlag, 2011, 13 (9), pp.901-905. ⟨10.1002/adem.201000354⟩. ⟨hal-00851285⟩
  • Daniel Zymelka, Sébastien Saunier, Dominique Goeuriot, Jérôme Molimard. Contactless Monitoring of Shrinkage and Temperature Distribution during Hybrid Microwave Sintering. Advanced Engineering Materials, Wiley-VCH Verlag, 2011, 13 (9), pp.901-905. ⟨10.1002/adem.201000354⟩. ⟨hal-00838035⟩
  • Jérôme Molimard, Gaetan Boyer, Hassan Zahouani. Frequency-based image analysis of random patterns: an alternative way to classical stereocorrelation. Journal of the Korean Society for nondestructuve testing, 2010, 30 (3), pp.181-193. ⟨emse-00904908⟩
  • Jérôme Molimard, Michel Darrieulat. QUANTITATIVE ANALYSIS OF HETEROGENEITIES OF DEFORMATION WITH THE GRID METHOD. Archives of Metallurgy and Materials, Versita, 2009, 54 (1), pp.7-17. ⟨emse-00465209⟩
  • Michel Bornert, Fabrice Brémand, Pascal Doumalin, Jean-Christophe Dupré, Marina Fazzini, et al.. Assessment of digital image correlation measurement errors: methodology and results. Experimental Mechanics, Society for Experimental Mechanics, 2009, 49, pp.353-370. ⟨10.1007/s11340-008-9204-7⟩. ⟨hal-00881043⟩
  • Marco Gigliotti, Jérôme Molimard, Frédéric Jacquemin, Alain Vautrin. Maximum curvatures of 0/90 plates under thermal stress: Modelling and experimental validation. Composites Science and Technology, Elsevier, 2009, 69 (1), pp.93-96. ⟨10.1016/j.compscitech.2007.10.054⟩. ⟨emse-00475540⟩
  • Christian Gogu, Raphael Haftka, Rodolphe Le Riche, Jérôme Molimard, Alain Vautrin, et al.. Comparison between the basic least squares and the bayesian approach for elastic constants identification. Journal of Physics: Conference Series, IOP Publishing, 2008, Vol 135 (N° 1), 8 p. ⟨10.1088/1742-6596/135/1/012045⟩. ⟨hal-00409731⟩
  • M. Gigliotti, J. Molimard, F. Jacquemin, A. Vautrin. Maximum curvatures of 0/90 plates under thermal stress: modelling and experimental validation. Composites Science and Technology, Elsevier, 2008, 69 (1), pp.93. ⟨10.1016/j.compscitech.2007.10.054⟩. ⟨hal-00499002⟩
  • Jérôme Molimard, Raul Cordero, Alain Vautrin. Signal-to-noise based local decorrelation compensation for speckle interferometry applications. Applied optics, Optical Society of America, 2008, 47 (19), pp.3535-3542. ⟨10.1364/AO.47.003535⟩. ⟨emse-00502172⟩
  • Jérôme Molimard, Raul Cordero, Alain Vautrin. A Signal to Noise Optimization Algorithm for Speckle Interferometry Applications. Applied Mechanics and Materials, Trans Tech Publications, 2008, 13-14, pp.29-38. ⟨10.4028/www.scientific.net/AMM.13-14.29⟩. ⟨emse-00502174⟩
  • S.V Lomov, Dmitry Ivanov, Ignaas Verpoest, Masaru Zako, Tetsusei Kurashiki, et al.. Full-field strain measurements for validation of meso-FE analysis of textile composites. Composites Part A: Applied Science and Manufacturing, Elsevier, 2007, 39 (6), pp.1218-1231. ⟨10.1016/j.compositesa.2007.09.011⟩. ⟨emse-00502167⟩
  • Raul Cordero, Jérôme Molimard, Amalia Martínez, Fernando Labbe. Uncertainty analysis of temporal phase-stepping algorithms for interferometry. Optics Communications, Elsevier, 2007, 275 (1), pp.144-155. ⟨10.1016/j.optcom.2007.02.057⟩. ⟨hal-00294751⟩
  • Marco Gigliotti, Frédéric Jacquemin, Jérôme Molimard, Alain Vautrin. Transient and cyclical hygrothermoelastic stress in laminated composite plates: Modelling and experimental assessment. Mechanics of Materials, Elsevier, 2007, 39 (8), pp.729-745. ⟨10.1016/j.mechmat.2006.12.006⟩. ⟨hal-00294710⟩
  • Marco Gigliotti, Frédéric Jacquemin, Jérôme Molimard, Alain Vautrin. Modelling and Experimental Characterisation of Hygrothermoelastic Stress in Polymer Matrix Composites. Macromolecular Symposia, Wiley-VCH Verlag, 2007, 247 (1), pp.199-210. ⟨10.1002/masy.200750123⟩. ⟨hal-00294736⟩
  • Jung-Ryul Lee, Jérôme Molimard, Alain Vautrin, Yves Surrel. Diffraction grating interferometers for mechanical characterisations of advanced fabric laminates. Optics and Laser Technology, Elsevier, 2006, 38 (1), pp.51-66. ⟨10.1016/j.optlastec.2004.10.002⟩. ⟨hal-00293005⟩
  • Jérôme Molimard, Rodolphe Le Riche, Alain Vautrin, J. Lee. Identification of the Four Orthotropic Plate Stiffnesses Using a Single Open-hole Tensile Test. Experimental Mechanics, Society for Experimental Mechanics, 2005, 45 (5), pp.404-411. ⟨10.1007/BF02427987⟩. ⟨hal-00409735⟩
  • Jérôme Molimard, Michel Querry, Philippe Vergne, I. Krupka, M. Hartl. Calculation of pressure distribution in EHD point contacts from experimentally determinated film thickness. Tribology International, Elsevier, 2005, 38 (4), pp.391-401. ⟨10.1016/j.triboint.2003.11.011⟩. ⟨hal-00143011⟩
  • Marco Gigliotti, F. Jacquemin, Jérôme Molimard, Alain Vautrin. Transition Saddle-Cylinder Shape of Thin Unsymmetric [0/90] Square Plates under Hygrothermal Loads: Fringe Projection Method and Variational Approach. Applied Mechanics and Materials, Trans Tech Publications, 2005, 3-4, pp.217-222. ⟨10.4028/www.scientific.net/AMM.3-4.217⟩. ⟨hal-00294703⟩
  • J. Molimard, K. Derrien, K. Triconnet, Y. Surrel, D. Baptiste. Détermination des champs de déformations par Moiré interférométrique dans les constituants d'un matériau composite. Instrumentation, Mesure, Métrologie, Lavoisier, 2004, pp. ⟨hal-00114054⟩
  • Jérôme Molimard, Rodolphe Le Riche. Identification de piézoviscosité en lubrification. Mechanics & Industry, EDP Sciences, 2003, 4 (6), pp.645-653. ⟨10.1016/j.mecind.2003.09.006⟩. ⟨emse-00686912⟩
  • Isabelle Jubault, J. Molimard, Antonius Lubrecht, J.L. Mansot, Philippe Vergne. In situ pressure and film thickness measurements in rolling/sliding lubricated point contacts. Tribology Letters, Springer Verlag, 2003, pp.1CDRom. ⟨hal-00454709⟩
  • J. Molimard, Michel Querry, Philippe Vergne, I. Krupka, M. Hartl, et al.. Differential colorimetry: A tool for the analysis of fluid film lubrication. Mécanique et Industries, Elsevier, 2002, pp.571-581. ⟨hal-00454890⟩

Chapitre d'ouvrage5 documents

  • Fanette Chassagne, Pierre Badel, Jérôme Molimard. Lower leg compression and its biomechanical effects on the soft tissues of the leg. Innovations and Emerging Technologies in Wound Care, Elsevier, pp.55-85, 2020, ⟨10.1016/B978-0-12-815028-3.00004-3⟩. ⟨hal-02929909⟩
  • Rébecca Bonnaire, Woo-Suck Han, Paul Calmels, Reynald Convert, Jérôme Molimard. Parametric study of lumbar belts in the case of low back pain: effect of patients' specific characteristics. Computational Biomechanics for Medicine, Springer International Publishing, pp.43-59, 2020, ⟨10.1007/978-3-030-15923-8_4⟩. ⟨hal-02929902⟩
  • Fanny Frauziols, Pierre Badel, Laurent Navarro, Jérôme Molimard, Nicolas Curt, et al.. Subject-specific computational prediction of the effects of elastic compression in the calf. Elsevier-Academic Press book "Biomechanics of Living Organs - Volume 1: Hyperelastic Constitutive Laws for Finite Element Modeling", 2017. ⟨hal-01671439⟩
  • Jérôme Molimard, Yves Surrel. Grid Method, Moiré and Deflectometry. Grediac, Michel and Hild, François. Full-Field Measurements and Identification in Solid Mechanics, Wiley, 2012. ⟨hal-01080734⟩
  • Michel Querry, Philippe Vergne, J. Molimard. Relevance of Colorimetric Interferometry for Thin Surface Film Contaminants. Developments in Surface Contamination and Cleaning, William Andrew Publisher, pp.675-690, 2007. ⟨hal-00381273⟩

Communication dans un congrès45 documents

  • Jérôme Molimard, Tristan Delettraz, Etienne Ojardias. Development of a miniaturized motion sensor for tracking warning signs of low-back pain. 14th International Conference on Biomedical Electronics and Devices, Feb 2021, Online Streaming, Portugal. pp.129-134, ⟨10.5220/0010291701290134⟩. ⟨hal-03191240⟩
  • Fanette Chassagne, Pierre Badel, Reynald Convert, Pascal Giraux, Jérôme Molimard. SIMULATION/MODELISATION OF THE ACTION OF COMPRESSION BANDAGES ON THE LOWER LEG . SOFMER, Oct 2016, Saint-Etienne, France. ⟨hal-01406605⟩
  • Jérôme Molimard, Rébecca Bonnaire, Reynald Convert, W.S Han, P Calmels. ROLE AND LIMIT OF BIOMECHANICAL MODELING IN THE STUDY OF MEDICAL DEVICES. 31ème Congrès de la Société Française de Médecine Physique et de Réadaptation (SOFMER 2016), Oct 2016, Saint-Etienne, France. ⟨hal-01406619⟩
  • Fanette Chassagne, Pierre Badel, Reynald Convert, Pascal Giraux, Jérôme Molimard. BIOMECHANICAL STUDY OF PRESSURE APPLIED ON THE LOWER LEG BY ELASTIC COMPRESSION BANDAGES . 22nd Congress of the European Society of Biomechanics, Jul 2016, Lyon, France. ⟨hal-01406596⟩
  • Fanny Frauziols, Fanette Chassagne, Pierre Badel, Laurent Navarro, Jérôme Molimard, et al.. IN VIVO INDENTIFICATION OF THE PASSIVE MECHANICAL PROPERTIES OF DEEP SOFT TISSUES IN THE HUMAN LEG . 22nd Congress of the European Society of Biomechanics, Jul 2016, Lyon, France. ⟨hal-01406615⟩
  • Rébecca Bonnaire, Jérôme Molimard, W.S Han, Reynald Convert, Paul Calmels. PREDICTING STRATEGY OF LUMBAR BELTS MECHANICAL PERFORMANCE AT DESIGN STAGE. 22nd Congress of the European Society of Biomechanics, Jul 2016, Lyon, France. ⟨hal-01406590⟩
  • Rébecca Bonnaire, W.-S Han, J Molimard, P Calmels, R Convert. Parametric study of lumber belts in the case of low back pain with effects of patients' specific characteristics. 13th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2015) and 2015 Conference on Imaging and Visualization, Sep 2015, Montréal, Canada. ⟨hal-01406487⟩
  • Rébecca Bonnaire, Jérome Molimard, W.S Han, R Convert, P Calmels. Étude biomécanique du comportement mécanique des ceintures lombaires par méthodes de champ. 22éme Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01406581⟩
  • Rébecca Bonnaire, J Molimard, W.S. Han, R Convert, P Calmels. Étude biomécanique du comportement mécanique des ceintures lombaires par méthodes de champ. 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01411586⟩
  • Rébecca Bonnaire, Jérôme Molimard, Woo Suck Han, Reynald Convert, Paul Calmels. Étude biomécanique du comportement mécanique des ceintures lombaires par méthodes de champ. Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01415642⟩
  • Rébecca Bonnaire, Marion Verhaeghe, Jérôme Molimard, Paul Calmels, Reynald Convert. Mesure de pression d’interface pour l’évaluation des ceintures de soutien lombaire. 29ème congrès de la Société Française de Médecine Physique et de Réadaptation, May 2014, Marseille, France. ⟨hal-01411258⟩
  • Rébecca Bonnaire, M Verhaeghe, J Molimard, P Calmels, R Convert. EVALUATION OF PRESSURE MAPPING SYSTEM FOR TESTING MEDICAL DEVICES. 16th International Conference on Experimental Mechanics, Jul 2014, Cambridge, United Kingdom. ⟨hal-01411275⟩
  • Rébecca Bonnaire, M.O Lapointe, Y Roumieu, J Molimard, P Calmels, et al.. Mechanical characterization of lumbar belts by measuring stress and interface pressure . 29ème congrès de la Société Française de Médecine Physique et de Réadaptation, May 2014, Marseille, France. ⟨hal-01411268⟩
  • T.T.Q Nguyen, J Molimard, A Vautrin, J Béraud. Failure mode of thermohydroscopically aged composites: case of NC2 © carbon fibre laminates. 16th International Conference on Experimental Mechanics, Jul 2014, Cambridge, United Kingdom. ⟨hal-01406449⟩
  • Sam Evans, Gaetan Boyer, Jerome Molimard, Hassan Zahouani. IDENTIFICATION OF MATERIAL PROPERTIES OF HUMAN SKIN IN VIVO. 11th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Apr 2013, Salt Lake City, United States. ⟨hal-01406391⟩
  • Rébecca Bonnaire, Jérôme Molimard, Paul Calmels, Reynald Convert. Simulation of a low back pain treatment using a generic finite element model. 19th Congress of the European Society of Biomechanics, ESB 2013, Aug 2013, Patras, Greece. pp.S- 31.3. ⟨hal-00875216⟩
  • Fanny Frauziols, Pierre-Yves Rohan, Pierre Badel, Stéphane Avril, Jérôme Molimard, et al.. Patient-specific modeling of the calf muscle under elastic compression using magnetic resonance imaging and ultrasound elastography. 38e Congrès de la Société de Biomécanique, SB 2013, Sep 2013, Marseille, France. pp. 332-333, ⟨10.1080/10255842.2013.815955⟩. ⟨hal-00874540⟩
  • Baptiste Pierrat, Jérôme Molimard, Laurent Navarro, Stéphane Avril, Paul Calmels. Evaluation of the mechanical efficiency of knee braces: A combined experimental-numerical approach. 19th Congress of the European Society of Biomechanics, ESB 2013, Aug 2013, Patras, Greece. pp.S- 55.2. ⟨hal-00875150⟩
  • Jérôme Molimard, Laurent Navarro. Using a Monte-Carlo-based approach to evaluate the uncertainty on fringe projection technique. PhotoMechanics 2013, May 2013, Montpellier, France. ⟨hal-00842886⟩
  • Jérôme Molimard, Wajdi Dandach, Pascal Picart. Direct strain and slope measurement using 3D DSPSI. PhotoMechanics 2013, May 2013, Montpellier, France. ⟨hal-00842895⟩
  • Rébecca Bonnaire, Jérôme Molimard, Paul Calmels, Reynald Convert. Biomechanical caracterisation of lumbar belt by full-field techniques: Preliminary results. PhotoMechanics 2013, May 2013, Montpellier, France. ⟨hal-00842833⟩
  • Rébecca Bonnaire, Jérôme Molimard, Paul Calmels, Reynald Convert. Biomechanical analysis and modeling of lumbar belt: Preliminary study.. 38e Congrès de la Société de Biomécanique, SB 2013, Sep 2013, Marseille, France. pp. 219-221, ⟨10.1080/10255842.2013.815880⟩. ⟨hal-00879662⟩
  • Aaron Romo, Stéphane Avril, Pierre Badel, Jérôme Molimard, Ambroise Duprey, et al.. Mechanical characterization of the thoracic ascending aortae. IRCOBI (International Research Council on Biomechanics of Injury), Sep 2012, France. IRC 12-72 pp. 638-649. ⟨hal-00778322⟩
  • Baptiste Pierrat, Jérôme Molimard, Paul Calmels, Laurent Navarro, Stéphane Avril. Efficiency and comfort of knee braces: A parametric study based on computational modelling. 10th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Apr 2012, Berlin, Germany. ⟨hal-00777915⟩
  • Baptiste Pierrat, Jérôme Molimard, Paul Calmels, Laurent Navarro, Stéphane Avril, et al.. Efficiency of knee braces: A biomechanical approach based on computational modeling.. ESDA 2012 ( ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis), Jul 2012, Nantes, France. pp.ESDA2012-82451. ⟨hal-00778268⟩
  • Baptiste Pierrat, Jérôme Molimard, Paul Calmels, Laurent Navarro, Stéphane Avril. Experimental analysis of skin sliding on the knee joint using orthosis device.. ICEM 15 (International Conference on Experimental Mechanics), Jul 2012, Porto, Portugal. ⟨hal-00778265⟩
  • Baptiste Pierrat, Jérôme Molimard, Paul Calmels, Laurent Navarro, Stéphane Avril. L'évaluation mécanique des orthèses du genou : modélisation par éléments finis. Données préliminaires.. 27ème Congrès de Médecine Physique et de Réadaptation de la SOFMER, Oct 2012, Toulouse, France. ⟨hal-00778269⟩
  • J Molimard. Estimation directe des déformations à partir d'une paire d'images de motif aléatoire par analyse fréquencielle. 20ème congrès Français de Mécanique, Aug 2011, Besançon, France. ⟨hal-01092844⟩
  • Christian Gogu, W. Yin, R.T. Haftka, P.G. Ifju, J. Molimard, et al.. Approche bayesienne pour gérer les incertitudes dans l’identification à partir de mesures de champ. 20ème Congrès Français de Mécanique, Besançon, 29 août - 2 sept., 2011, Besançon, France. ⟨hal-02187947⟩
  • Christian Gogu, W. Yin, Raphael Haftka, P. Ifju, Jérôme Molimard, et al.. Applying a Bayesian Approach to Identification of Orthotropic Elastic Constants from Full Field Displacement Measurements. ICEM 14 - 14th International Conference on Experimental Mechanics, Jul 2010, Poitiers, France. 2p, 37005, ⟨10.1051/epjconf/20100637005⟩. ⟨emse-00686511⟩
  • J. Molimard, Claudiu Badulescu, Michel Bornert, J.C. Dupré, S. Equis, et al.. Metrological analysis of several algorithms used to demodulate images with spatial carrier. 14th International Conference on Experimental Mechanics, Jul 2010, Poitiers, France. ⟨hal-00545555⟩
  • Alain Vautrin, Gustavo Silva, Jérôme Molimard, Rodolphe Le Riche. Localisation et identification de l'hétérogénéité de comportement mécanique de matériaux. 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France. 753, 6p. ⟨emse-00686762⟩
  • Christian Gogu, Raphael Haftka, Rodolphe Le Riche, Jérôme Molimard, Alain Vautrin, et al.. Bayesian Statistical Identification of Orthotropic Elastic Constants Accounting for Measurement and Modeling Errors. 11th AIAA Non-Deterministic Approaches Conference, May 2009, Palm Springs, United States. pp.No. AIAA-2009-2258. ⟨emse-00686558⟩
  • Christian Gogu, Raphael Haftka, Rodolphe Le Riche, Jérôme Molimard, Alain Vautrin. Dimensionality reduction of full fields by the principal components analysis. 17th International Conference on Composite Materials, Jul 2009, Edinburgh, United Kingdom. pp.F14.7. ⟨emse-00686753⟩
  • Christian Gogu, Raphael Haftka, Rodolphe Le Riche, Jérôme Molimard. High Fidelity Frequency Response Surface Approximations for Vibration Based Elastic Constants Identification. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO8), Jun 2009, Lisbon, Portugal. ⟨emse-00686548⟩
  • Jérôme Molimard, Andrés Dolinko, Guillermo Kaufmann. Experimental study of thick composites stability under thermal loading using 3D ESPI set-up. 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS2009), May 2009, Antwerp, Belgium. pp.255-264. ⟨hal-00849723⟩
  • J Molimard, Claudiu Badulescu, Michel Bornert, Jean-Christophe Dupré, S. Esquis, et al.. Méthodologie d’analyse métrologique d’algorithmes de traitement d’images à porteuse : résolution et résolution spatiale. XIXième Congrès Français de Mécanique, Aug 2009, Marseille, France. ⟨hal-01579561⟩
  • Christian Gogu, Raphael Haftka, Rodolphe Le Riche, Jérôme Molimard, Alain Vautrin. A Bayesian Framework for Orthotropic Elastic Constants Identification Accounting for both Error and Variability. 8th. World Congress on Computational Mechanics (WCCM8) 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Jun 2008, Venise, Italy. pp.1601. ⟨emse-00686773⟩
  • Christian Gogu, Raphael T. Hafkta, Rodolphe Le Riche, Jérôme Molimard, Alain Vautrin. Illustrating the advantages of a Bayesian over a least squares approach to material properties identification. ESM Centennial Mechanics Conference: Liviu Librescu Session, May 2008, Blacksburg, United States. ⟨emse-00687650⟩
  • J. Molimard, C. Badalescu, Michel Bornert, J.C. Dupré, S. Equis, et al.. Caractérisation métrologique du décodage de l’information dans les méthodes optiques de champ : application à l’inter-comparaison de méthodes à codage périodique.. Colloque Mesures et Techniques Optiques pour l’Industrie, Nov 2008, Nantes, France. ⟨hal-01585943⟩
  • Jérôme Molimard, Rodolphe Le Riche. Application of the Open Hole Tensile Test to the Identification of the in- plane Characteristics of Orthotropic Plates. 2nd International Conference on Composites Testing and Model Identification, Sep 2004, Bristol, United Kingdom. ⟨emse-00691585⟩
  • Jérôme Molimard, Rodolphe Le Riche, Alain Vautrin, J.R Lee. Identification of the four orthotropic plate stiffnesses using a single open-hole tensile test. 2004 SEM X International Congress & Exposition on Experimental & Applied Mechanics, Jun 2004, Costa Mesa, United States. pp.24829. ⟨emse-00687052⟩
  • Jérôme Molimard, Rodolphe Le Riche. Identification de piézoviscosité en lubrification. AFM (Association Française de Mécanique) : Identification des propriétés mécaniques à partir de mesures de champs, Apr 2002, Clermont-Ferrand, France. pp.645-653, ⟨10.1016/j.mecind.2003.09.006⟩. ⟨emse-00691661⟩
  • J. Molimard, Michel Querry, Philippe Vergne, I. Krupka, M. Hartl. Inverse evaluation of pressure distribution in elastohydrodynamic point contacts. Society of Experimental mechanics Annual Conference, Jun 2002, États-Unis. ⟨hal-00507967⟩
  • Isabelle Jubault, J.L. Mansot, Philippe Vergne, Antonius Lubrecht, J. Molimard. In situ pressure measurements in an elastohydrodynamically lubricated point contact using Raman microspectrometry. Comparision with numerical calculations.. 29th Leeds-Lyon Symposium on Tribology, Sep 2002, Royaume-Uni. ⟨hal-00507947⟩

Rapport1 document

  • Rodolphe Le Riche, Alexandre Boyer, Joël Monnatte, Jérôme Molimard, Gustavo Silva. Préconception d'arcs à relâchement d'effort. [Rapport de recherche] Mines Saint-Etienne. 2008. ⟨emse-00687638⟩