Jean-Luc Bouvard

Documents

Publications

noelle-billon

	Time–Temperature Superposition Principle in Shearing Tests Compared to Tension Conditions for Polymers Close to Glass Transition Noëlle Billon , Carlos Eloy Federico , Guilhem Rival , Jean-Luc Bouvard , Alain Burr International Journal of Molecular Sciences, 2023, 24 (4), pp.3944. ⟨10.3390/ijms24043944⟩ Article dans une revue hal-04014924v1
	Thermo-Hydro-Glycol Ageing of Polyamide 6,6: Microstructure-Properties Relationships Clément Laügt , Jean-Luc Bouvard , Gilles Robert , Noëlle Billon Polymers, 2022, 14 (19), pp.4097. ⟨10.3390/polym14194097⟩ Article dans une revue hal-04389118v1
	Thermo-Hydro-Glycol Ageing of Polyamide 6,6: Microstructure-Properties Relationships Clément Laügt , Jean-Luc Bouvard , Gilles Robert , Noëlle Billon Polymers, 2022, 14 (19), pp.4097. ⟨10.3390/polym14194097⟩ Article dans une revue hal-03874082v1
	Modelling strain rate and temperature dependent mechanical response of PMMAs at large deformation from below to above Tg C.E. Federico , Jean-Luc Bouvard , Christelle Combeaud , N. Billon Polymer, 2020, 202, pp.122710. ⟨10.1016/j.polymer.2020.122710⟩ Article dans une revue hal-03081954v1
	Strain and filler ratio transitions from chains network to filler network damage in EPDM during single and cyclic loadings Nicolas Candau , Oguzhan Oguz , Edith Peuvrel-Disdier , Jean-Luc Bouvard , Christophe Pradille Polymer, 2020, 197, pp.122435. ⟨10.1016/j.polymer.2020.122435⟩ Article dans une revue hal-03047083v1
	Heat source and voiding signatures of Mullins damage in filled EPDM Nicolas Candau , Oguzhan Oguz , Edith Peuvrel-Disdier , Jean-Luc Bouvard , María Lluïsa Maspoch Polymer Testing, 2020, 91, pp.106838. ⟨10.1016/j.polymertesting.2020.106838⟩ Article dans une revue hal-03047223v2
	Modeling the effective viscoelastic properties of PEEK matrix reinforced by arbitrary oriented short glass fibers Boris Burgarella , Aurelien Maurel-Pantel , Noël Lahellec , Jean-Luc Bouvard , Noëlle Billon Mechanics of Time-Dependent Materials, 2020, ⟨10.1007/s11043-020-09475-9⟩ Article dans une revue hal-03000114v1
	Effect of the Strain Rate on Damage in Filled EPDM during Single and Cyclic Loadings Nicolas Candau , Oguzhan Oguz , Edith Peuvrel-Disdier , Jean-Luc Bouvard , María Lluïsa Maspoch Polymers, 2020, 12 (12), pp.3021. ⟨10.3390/polym12123021⟩ Article dans une revue hal-03092362v1
	Strain-induced network chains damage in carbon black filled EPDM Nicolas Candau , Oguzhan Oguz , Edith Peuvrel-Disdier , Jean-Luc Bouvard , Christophe Pradille Polymer, 2019, 175, pp.329-338. ⟨10.1016/j.polymer.2019.05.017⟩ Article dans une revue hal-02346121v1
	Large strain/time dependent mechanical behaviour of PMMAs of different chain architectures. Application of time-temperature superposition principle Carlos Eloy Federico Fernandez , Jean-Luc Bouvard , Christelle Combeaud , Noëlle Billon Polymer, 2018, 139, pp.177 - 187. ⟨10.1016/j.polymer.2018.02.021⟩ Article dans une revue hal-01723367v1
	Effective viscoelastic behavior of short fibers composites using virtual DMA experiments Boris Burgarella , Aurelien Maurel-Pantel , Noël Lahellec , Jean-Luc Bouvard , Noëlle Billon Mechanics of Time-Dependent Materials, 2018, 23 (3), pp.337-360. ⟨10.1007/s11043-018-9386-z⟩ Article dans une revue hal-01806389v1
	Mechanical Behavior—Microstructure Relationships in Injection-Molded Polyamide 66 Noëlle Billon , Joan Giraudeau , Jean-Luc Bouvard , Gilles Robert Polymers, 2018, 10 (10), pp.1047 Article dans une revue hal-01979944v1
	On the use of a four-cameras stereovision system to characterize large 3D deformation in elastomers Nicolas Candau , Christophe Pradille , Jean-Luc Bouvard , Noëlle Billon Polymer Testing, 2016, 56, pp.314 - 320. ⟨10.1016/j.polymertesting.2016.10.017⟩ Article dans une revue hal-01414261v1
	Modeling of time dependent mechanical behavior of polymers: Comparison between amorphous and semicrystalline polyethylene terephthalate Florian Gehring , Jean-Luc Bouvard , Noëlle Billon Journal of Applied Polymer Science, 2016, 133 (35), pp.43837. ⟨10.1002/app.43837⟩ Article dans une revue hal-01353996v1
	Influence of fabrics’ design parameters on the morphology and 3D permeability tensor of quasi-unidirectional non-crimp fabrics Boris Martin , Sébastien Comas-Cardona , Christophe Binetruy , Noëlle Billon , Jean-Luc Bouvard Composites Part A: Applied Science and Manufacturing, 2016, 90, pp.470-479. ⟨10.1016/j.compositesa.2016.08.013⟩ Article dans une revue hal-01368853v1
	A thermo-mechanical large deformation constitutive model for polymers based on material network description: Application to a semi-crystalline polyamide 66 Aurelien Maurel-Pantel , Erwan Baquet , Jérôme Bikard , Jean-Luc Bouvard , Noëlle Billon International Journal of Plasticity, 2015, 67, pp.102-126. ⟨10.1016/j.ijplas.2014.10.004⟩ Article dans une revue hal-01083213v1

	Numerical Modeling of the Phase Transformation and Morphology Evolution of Polyamide 12 in Laser Powder Bed Fusion Process at Particle Scale Zhongfeng Xu , Lionel Freire , Noëlle Billon , Yancheng Zhang , Jean-Luc Bouvard Sim-Am2023, Jul 2023, Munich (Allemagne), Germany Communication dans un congrès hal-04500387v1
	On the use of time-temperature superposition principle to characterize polymers at large deformation Carlos Eloy Federico Fernandez , Jean-Luc Bouvard , Christelle Combeaud , Noëlle Billon International Conference on Advanced Computational Engineering and Experimenting, Jul 2019, Athenes, Greece Communication dans un congrès hal-02428879v1
	A study of the multi-axial fatigue damage mechanisms for a glass fibre reinforced thermoplastics (pa66) Fang Lu , Sabine Cantournet , Noëlle Billon , Jean-Luc Bouvard , Marc Bernacki FATIGUE 2018, May 2018, Poitiers, France Communication dans un congrès hal-01814105v1
	Short Fiber Reinforced Thermoplastic Composite Modelling using Full Field Computing, Application to Glass Fiber Reinforced PEEK Boris Burgarella , Aurelien Maurel-Pantel , Noël Lahellec , Jean-Luc Bouvard , Noëlle Billon 10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy Communication dans un congrès hal-03560992v1
	Generation and homogenization of RVEs for thermoplastics reinforced with discontinuous reinforcements Jean-Luc Bouvard , Ivan Coppo , Fang Lu , Modesar Shakoor , Sabine Cantournet SEM Annual Conference, The Society for Experimental Mechanics, Jun 2017, Indianapolis, United States Communication dans un congrès hal-01558420v1
	Génération et homogénéisation de vers pour composites thermoplastiques à renforts discontinus. Ivan Coppo , Fang Lu , Modesar Shakoor , Sabine Cantournet , Noëlle Billon 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France Communication dans un congrès hal-01504510v1
	Modélisation du comportement visco-élastique d'un composite thermoplastique renforcé par des fibres courtes de verre. Boris Burgarella , Aurélien Maurel Pantel , Noel Lahellec , Jean-Luc Bouvard , Hervé Moulinec Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France Communication dans un congrès hal-01621563v1
	Short Fiber Reinforced Thermoplastic Composite Modelling Using Full Field Computing, Application to Glass Fiber Reinforced PEEK Boris Burgarella , Aurelien Maurel-Pantel , Noel Lahellec , Hervé Moulinec , Frédéric Lebon 14th U.S. National Congress on Computational Mechanics, Jul 2017, Montréal, Canada Communication dans un congrès hal-01697470v1
	Linearization and implementation of venu model in small strain theory for polyamide 6.6 Dimitrios S. Anagnostou , Georges Chatzigeorgiou , Jean-Luc Bouvard , Yves Chemisky , Fodil Meraghni ECCM17 - 17 th European Conference on Composite Materials, Jun 2016, Munich, Germany Communication dans un congrès hal-01361930v1
	Coupled thermal and volume change measurements during stretching of filled epdm rubbers Nicolas Candau , Jean-Luc Bouvard , Edith Peuvrel-Disdier , Rudy Valette , Christophe Pradille International Conference on Mechanics of Time Dependent Materials, 2016, Paris, France Communication dans un congrès hal-01487254v1
	Time-dependent thermomechanical constitutive model for polymers based on network theory: application to thermoplastic polymers Florian Gehring , Jean-Luc Bouvard , Noëlle Billon 10th International Conference on Mechanics of Time-Dependent Materials (MTDM2016), May 2016, Paris, France Communication dans un congrès hal-01499450v1
	Coupled thermal and volume change measurements during stretching of filled EPDM rubbers Nicolas Candau , Jean-Luc Bouvard , Edith Peuvrel-Disdier , Rudy Valette , Christophe Pradille 10th International Conference on the Mechanics of Time Dependent Materials, May 2016, Paris, France. 2 p Communication dans un congrès hal-01500698v1
	The influence of fabrics’ design parameters on the 3D permeability tensor of quasi-unidirectional non-crimp fabrics. Boris Martin , Sébastien Comas-Cardona , Christophe Binetruy , Noëlle Billon , Jean-Luc Bouvard The 13th International Conference on Flow Processes in Composite Materials (FPCM 13), Jul 2016, Kyoto, Japan Communication dans un congrès hal-01499459v1
	Short fiber reinforced thermoplastics modelling Boris Burgarella , Aurelien Maurel-Pantel , Noel Lahellec , Jean-Luc Bouvard , Hervé Moulinec MTDM2016: 10th International Conference on Mechanics of Time-Dependent Materials , May 2016, Paris, France Communication dans un congrès hal-01498814v1
	Coupled thermal and volume change measurements during stretching of filled EPDM rubbers Nicolas Candau , Jean-Luc Bouvard , Edith Peuvrel-Disdier , Rudy Valette , Christophe Pradille 10th International Conference on Mechanics of Time-Dependent Materials (MTDM2016), May 2016, Paris, France Communication dans un congrès hal-01499444v1
	Thermo-mechanical behavior in Poly(methyl methacrylate) with different molecular weights. Carlos Eloy Federico Fernandez , Jean-Luc Bouvard , Noëlle Billon , Christophe Pradille , Christelle Combeaud gfpmed2015 -14èmes journées scientifiques de la section Méditerranée du GFP, Oct 2015, Nice, France. 2 p Communication dans un congrès hal-01260858v1
	Effect of crystalline microstructure and moisture on local mechanical behaviour in injection moulded PA66 Giraudeau Joan , Jean-Luc Bouvard , Gilles Robert , Noëlle Billon DYFP2015, 16th International Conference on Deformation, Yield and Fracture of Polymers, Mar 2015, Kerkrade, Netherlands. 4 p Communication dans un congrès hal-01259589v1
	Effect of the stretching on the network structure of carbon black filled EPDM rubbers. Nicolas Candau , Jean-Luc Bouvard , Edith Peuvrel-Disdier , Rudy Valette , Noëlle Billon ELASTOMERY 2015, 16ème Conférence- Elaboration, Characterisation, Recycling and Durability, Nov 2015, Tours, France. 2 p Communication dans un congrès hal-01260847v1
	Thermo-mechanical behavior in Poly(methyl methacrylate) with different molecular weights. Carlos Eloy Federico Fernandez , Jean-Luc Bouvard , Noëlle Billon , Christophe Pradille , Christelle Combeaud JIP-JEPO2015 : 1st French-Spanish Joint Congress for Young Researchers in Polymers, Sep 2015, San Sebastian, Spain. 2 p Communication dans un congrès hal-01260877v1
	Mechanical testing and numerical modeling of a semi-crystalline PA66 under complex loading. Jean-Luc Bouvard , Noëlle Billon 2015 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Jun 2015, Costa Mesa, United States. 4 p Communication dans un congrès hal-01260839v1
	Effect of stretching on the network structure of carbon black filled EPDM rubbers. Nicolas Candau , Jean-Luc Bouvard , Edith Peuvrel-Disdier , Rudy Valette , Noëlle Billon 16ème Conférence Elastomery (Elastomery 2015), Nov 2015, Tours, France. 2 p Communication dans un congrès hal-01502249v1
	Viscoelastic characterization; how to fill experimental gap between solid and liquid techniques Coraly Cuminatto , Jean-Luc Bouvard , Rudy Valette , Michel Vincent , Noëlle Billon ICEM16 - International Conference on Experimental Mechanics, Jul 2014, Cambridge, United Kingdom Communication dans un congrès hal-01113524v1
	Modeling for time-dependant mechanical behavior of polymers close to glass transition: fundamentals and experimental validation Noëlle Billon , Audrey Durin , Jean-Luc Bouvard , Gilles Robert The 9th International Conference on the Mechanics of Time Dependent Materials, May 2014, Montreal, Canada Communication dans un congrès hal-01112548v1
	Validation du modèle « Visco-hyperelastic Network Unit » (VENU) pour la prédiction du comportement mécanique de polymères thermoplastiques Jean-Luc Bouvard , Noelle Billon CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France Communication dans un congrès hal-03439754v1

	Propriétés et comportement mécanique des polymères thermoplastiques Noëlle Billon , Jean-Luc Bouvard Techniques de l'Ingénieur, 26p., 2015, Référence AM3115 Chapitre d'ouvrage hal-01259577v1

Jean-Luc Bouvard

Publications

Time–Temperature Superposition Principle in Shearing Tests Compared to Tension Conditions for Polymers Close to Glass Transition

Thermo-Hydro-Glycol Ageing of Polyamide 6,6: Microstructure-Properties Relationships

Thermo-Hydro-Glycol Ageing of Polyamide 6,6: Microstructure-Properties Relationships

Modelling strain rate and temperature dependent mechanical response of PMMAs at large deformation from below to above Tg

Strain and filler ratio transitions from chains network to filler network damage in EPDM during single and cyclic loadings

Heat source and voiding signatures of Mullins damage in filled EPDM

Modeling the effective viscoelastic properties of PEEK matrix reinforced by arbitrary oriented short glass fibers

Effect of the Strain Rate on Damage in Filled EPDM during Single and Cyclic Loadings

Strain-induced network chains damage in carbon black filled EPDM

Large strain/time dependent mechanical behaviour of PMMAs of different chain architectures. Application of time-temperature superposition principle

Effective viscoelastic behavior of short fibers composites using virtual DMA experiments

Mechanical Behavior—Microstructure Relationships in Injection-Molded Polyamide 66

On the use of a four-cameras stereovision system to characterize large 3D deformation in elastomers

Modeling of time dependent mechanical behavior of polymers: Comparison between amorphous and semicrystalline polyethylene terephthalate

Influence of fabrics’ design parameters on the morphology and 3D permeability tensor of quasi-unidirectional non-crimp fabrics

A thermo-mechanical large deformation constitutive model for polymers based on material network description: Application to a semi-crystalline polyamide 66

Numerical Modeling of the Phase Transformation and Morphology Evolution of Polyamide 12 in Laser Powder Bed Fusion Process at Particle Scale

On the use of time-temperature superposition principle to characterize polymers at large deformation

A study of the multi-axial fatigue damage mechanisms for a glass fibre reinforced thermoplastics (pa66)

Short Fiber Reinforced Thermoplastic Composite Modelling using Full Field Computing, Application to Glass Fiber Reinforced PEEK

Generation and homogenization of RVEs for thermoplastics reinforced with discontinuous reinforcements

Génération et homogénéisation de vers pour composites thermoplastiques à renforts discontinus.

Modélisation du comportement visco-élastique d'un composite thermoplastique renforcé par des fibres courtes de verre.

Short Fiber Reinforced Thermoplastic Composite Modelling Using Full Field Computing, Application to Glass Fiber Reinforced PEEK

Linearization and implementation of venu model in small strain theory for polyamide 6.6

Coupled thermal and volume change measurements during stretching of filled epdm rubbers

Time-dependent thermomechanical constitutive model for polymers based on network theory: application to thermoplastic polymers

Coupled thermal and volume change measurements during stretching of filled EPDM rubbers

The influence of fabrics’ design parameters on the 3D permeability tensor of quasi-unidirectional non-crimp fabrics.

Short fiber reinforced thermoplastics modelling

Coupled thermal and volume change measurements during stretching of filled EPDM rubbers

Thermo-mechanical behavior in Poly(methyl methacrylate) with different molecular weights.

Effect of crystalline microstructure and moisture on local mechanical behaviour in injection moulded PA66

Effect of the stretching on the network structure of carbon black filled EPDM rubbers.

Thermo-mechanical behavior in Poly(methyl methacrylate) with different molecular weights.

Mechanical testing and numerical modeling of a semi-crystalline PA66 under complex loading.

Effect of stretching on the network structure of carbon black filled EPDM rubbers.

Viscoelastic characterization; how to fill experimental gap between solid and liquid techniques

Modeling for time-dependant mechanical behavior of polymers close to glass transition: fundamentals and experimental validation

Validation du modèle « Visco-hyperelastic Network Unit » (VENU) pour la prédiction du comportement mécanique de polymères thermoplastiques

Propriétés et comportement mécanique des polymères thermoplastiques