Accéder directement au contenu

Fabrice Schmidt

173
Documents
Identifiants chercheurs

Présentation

Publications

Image document

Thermo-optical coupling applied to high luminance LED used in automotive front lighting

Clément Rongier , Rémi Gilblas , N. Rasoldier , Fabrice Schmidt , Yannick Le Maoult
International Journal of Thermal Sciences, 2023, 191, pp.108337. ⟨10.1016/j.ijthermalsci.2023.108337⟩
Article dans une revue hal-04067880v1
Image document

Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling

William Han , Quentin Govignon , Arthur Cantarel , Fabrice Schmidt
Polymer Engineering and Science, 2022, 62 (4), pp.999-1012. ⟨10.1002/pen.25901⟩
Article dans une revue hal-03563141v2
Image document

Infrared thermography applied to the validation of thermal simulation of high luminance LED used in automotive front lighting

Clément Rongier , Rémi Gilblas , Yannick Le Maoult , S. Belkessam , Fabrice Schmidt
Infrared Physics and Technology, 2022, 120, pp.103980. ⟨10.1016/j.infrared.2021.103980⟩
Article dans une revue hal-03466794v1
Image document

Infrared heating modeling of recycled PET preforms in injection stretch blow molding process

Anh-Duc Le , Rémi Gilblas , Vincent Lucin , Yannick Le Maoult , Fabrice Schmidt
International Journal of Thermal Sciences, 2022, 181, pp.107762. ⟨10.1016/j.ijthermalsci.2022.107762⟩
Article dans une revue hal-03712665v1
Image document

Determination of a degradation-induced limit for the consolidation of CF/PEEK composites using a thermo-kinetic viscosity model

Olivier de Almeida , Lisa Feuillerat , Jean-Charles Fontanier , Fabrice Schmidt
Composites Part A: Applied Science and Manufacturing, 2022, 158, pp.106943. ⟨10.1016/j.compositesa.2022.106943⟩
Article dans une revue hal-03637394v1
Image document

Effect of melt spinning on the integrity of poly(ether ether ketone) for commingled yarn based composite preforms

Lisa Feuillerat , Olivier de Almeida , Jean-Charles Fontanier , Carole Aubry , Pascal Rumeau
Polymer Degradation and Stability, 2021, 191, pp.109686. ⟨10.1016/j.polymdegradstab.2021.109686⟩
Article dans une revue hal-03306883v1
Image document

Effect of poly(ether ether ketone) degradation on commingled fabrics consolidation

Feuillerat Lisa , Olivier de Almeida , Fontanier Jean-Charles , Fabrice Schmidt
Composites Part A: Applied Science and Manufacturing, 2021, 149, pp.1-9/106482. ⟨10.1016/j.compositesa.2021.106482⟩
Article dans une revue hal-03247552v1
Image document

A combined experimental and numerical approach for radiation heat transfer in semi-crystalline thermoplastics

Sinan Boztepe , Olivier de Almeida , Rémi Gilblas , Yannick Le Maoult , Fabrice Schmidt
International Journal of Thermal Sciences, 2019, 142, pp.142-155. ⟨10.1016/j.ijthermalsci.2019.04.020⟩
Article dans une revue hal-02109750v1
Image document

Experimental characterization and modeling of the temperature and rate-dependent shear behaviour of powder-impregnated glass fiber/PA66 woven semipregs

Theo Baumard , Gary Menary , Olivier de Almeida , Peter Martin , Fabrice Schmidt
Composites Science and Technology, 2019, 180, pp.23-32. ⟨10.1016/j.compscitech.2019.05.011⟩
Article dans une revue hal-02134092v1
Image document

The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling

Sinan Boztepe , Rémi Gilblas , Olivier de Almeida , Christian Gerlach , Yannick Le Maoult
International Journal of Material Forming, 2018, 11 (5), pp.717-727. ⟨10.1007/s12289-017-1386-z⟩
Article dans une revue hal-01869104v1
Image document

BEM computation of 3D Stokes flow including moving front

M.-Q. Thai , Fabrice Schmidt , Gilles Dusserre , Arthur Cantarel , L. Silva
International Journal of Material Forming, 2017, 10 (4), pp.567-580. ⟨10.1007/s12289-016-1302-y⟩
Article dans une revue hal-02050982v1
Image document

Effect of the developed temperature field on the molecular interdiffusion at the interface in infrared welding of polycarbonate composites

Andre Chateau Akue Asseko , Benoît Cosson , Eric Lafranche , Fabrice Schmidt , Yannick Le Maoult
Composites Part B: Engineering, 2016, 97, p. 53-61. ⟨10.1016/j.compositesb.2016.04.064⟩
Article dans une revue hal-01609024v1
Image document

Numerical simulation of extruded clay paste compression

Jérémie Vignes , Fabrice Schmidt , Gilles Dusserre , Jean Frédéric Dalmasso
International Journal of Material Forming, 2015, 8 (1), pp.111-118. ⟨10.1007/s12289-013-1152-9⟩
Article dans une revue hal-02050978v1
Image document

Laser transmission welding of composites - Part B: Experimental validation of numerical model

Andre Chateau Akue Asseko , Benoît Cosson , Fabrice Schmidt , Yannick Le Maoult , Rémi Gilblas
Infrared Physics and Technology, 2015, 73, p. 304-311. ⟨10.1016/j.infrared.2015.10.005⟩
Article dans une revue hal-01611010v1
Image document

Laser transmission welding of composites-Part A: Thermo-physical and optical characterization of materials

Andre Chateau Akue Asseko , Benoît Cosson , Fabrice Schmidt , Yannick Le Maoult , Eric Lafranche
Infrared Physics and Technology, 2015, 72, p. 293-299. ⟨10.1016/j.infrared.2015.02.004⟩
Article dans une revue hal-01611009v1
Image document

Analytical and numerical modeling of light scattering in composite transmission laser welding process

Andre Chateau Akue Asseko , Benoit Cosson , Mylene Deleglise , Fabrice Schmidt , Yannick Le Maoult
International Journal of Material Forming, 2015, 8 (1), pp.127-135. ⟨10.1007/s12289-013-1154-7⟩
Article dans une revue hal-02050967v1
Image document

BEM-based models to simulate the resin flow at macroscale and microscale in LCM processes

Renaud Gantois , Arthur Cantarel , Benoit Cosson , Gilles Dusserre , Jean-Noël Felices
Polymer Composites, 2013, 34 (8), pp.1235-1244. ⟨10.1002/pc.22531⟩
Article dans une revue hal-01687314v1
Image document

An optimization method with experimental validation for the design of extrusion wire coating dies for a range of different materials and operating conditions

N. Lebaal , S. Puissant , Fabrice Schmidt , D. Schlaefli
Polymer Engineering and Science, 2012, 52 (12), pp.2675-2687. ⟨10.1002/pen.23203⟩
Article dans une revue hal-01687329v1
Image document

Efficient Mold Cooling Optimization by Using Model Reduction

Fabrice Schmidt , Nicolas Pirc , Marcel Mongeau , Francisco Chinesta
International Journal of Material Forming, 2011, 4 (1), pp.73-82. ⟨10.1007/s12289-010-0988-5⟩
Article dans une revue hal-01006784v1
Image document

Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests

Gilles Dusserre , Gérard Bernhart , Fabrice Schmidt , Gilles Dour
Journal of Non-Newtonian Fluid Mechanics, 2011, 166 (21-22), pp.1229-1238. ⟨10.1016/j.jnnfm.2011.08.001⟩
Article dans une revue hal-01716273v1
Image document

Mold Filling Simulation of Resin Transfer Molding Combining BEM and Level Set Method

Renaud Gantois , Arthur Cantarel , Gilles Dusserre , Jean Noel Félices , Fabrice Schmidt
Applied Mechanics and Materials, 2011, 62, pp.57-65. ⟨10.4028/www.scientific.net/AMM.62.57⟩
Article dans une revue hal-02050956v1
Image document

Infrared heating stage simulation of semi-transparent media (PET) using ray tracing method

Benoit Cosson , Fabrice Schmidt , Yannick Le Maoult , Maxime Bordival
International Journal of Material Forming, 2011, 4 (1), pp.1-10. ⟨10.1007/s12289-010-0985-8⟩
Article dans une revue hal-01709492v1
Image document

Simulations of an Infrared Composite Curing Process

Sawsane Nakouzi , Johann Pancrace , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
Advanced Engineering Materials, 2011, Materials Process Engineering: Nantes 2010, 13 (7), pp.604-608. ⟨10.1002/adem.201000344⟩
Article dans une revue hal-01716274v1
Image document

Application of a response surface method to the optimal design of the wall temperature profiles in extrusion die

Nadhir Lebaal , Stephan Puissant , Fabrice Schmidt
International Journal of Material Forming, 2010, 3 (1), pp.47-58. ⟨10.1007/s12289-009-0416-x⟩
Article dans une revue hal-01716275v1
Image document

Curing simulation of composites coupled with infrared heating

Sawsane Nakouzi , J. Pancrace , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
International Journal of Material Forming, 2010, 3 (1), pp.587-590. ⟨10.1007/s12289-010-0838-5⟩
Article dans une revue hal-01709496v1
Image document

Coupled visco-mechanical and diffusion void growth modelling during composite curing

Y. Ledru , Gérard Bernhart , Robert Piquet , Fabrice Schmidt , Laurent Michel
Composites Science and Technology, 2010, 70 (15), pp.2139-2145. ⟨10.1016/j.compscitech.2010.08.013⟩
Article dans une revue hal-00690067v1
Image document

A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult , B. Cosson , B. Plantamura
International Journal of Material Forming, 2010, 3 (Suppl. 1), pp.809-812. ⟨10.1007/s12289-010-0893-y⟩
Article dans une revue hal-01709495v1
Image document

Numerical simulation of resin transfer molding using BEM and level set method

R. Gantois , Arthur Cantarel , Gilles Dusserre , Jean-Noël Felices , Fabrice Schmidt
International Journal of Material Forming, 2010, 3 (Supp 1), pp.635-638. ⟨10.1007/s12289-010-0850-9⟩
Article dans une revue hal-01716278v1
Image document

Optimisation of extrusion flat die design and die wall temperature distribution, using Kriging and response surface method

Nadhir Lebaal , Fabrice Schmidt , Stephan Puissant
International Journal of Materials and Product Technology, 2010, 38 (2-3), pp.307-322. ⟨10.1504/IJMPT.2010.032107⟩
Article dans une revue hal-01716277v1
Image document

Design and optimization of three-dimensional extrusion dies, using constraint optimization algorithm

Nadhir Lebaal , Fabrice Schmidt , Stephan Puissant
Finite Elements in Analysis and Design, 2009, 45 (5), pp.333-340. ⟨10.1016/j.finel.2008.10.008⟩
Article dans une revue hal-01716280v1
Image document

Optimization of Preform Temperature Distribution for the Stretch-Blow Molding of PET Bottles: Infrared Heating and Blowing Modeling

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult , Vincent Velay
Polymer Engineering and Science, 2009, 49 (4), pp.783-793. ⟨10.1002/pen.21296⟩
Article dans une revue hal-01703247v1
Image document

Numerical infrared heating of semi transparent thermoplastic using ray tracing method

B. Cosson , Fabrice Schmidt , Yannick Le Maoult
International Journal of Material Forming, 2009, 2 (1), pp.267-270. ⟨10.1007/s12289-009-0544-3⟩
Article dans une revue hal-01709498v1
Image document

Optimization of 3D Cooling Channels in Injection Molding using DRBEM and Model Reduction

Nicolas Pirc , Fabrice Schmidt , Marcel Mongeau , Florian Bugarin , Francisco Chinesta
International Journal of Material Forming, 2009, 2 (1), pp.271-274. ⟨10.1007/s12289-009-0598-2⟩
Article dans une revue hal-01349395v1
Image document

Design of Optimal Extrusion Die for a Range of Different Materials

Nadhir Lebaal , Fabrice Schmidt , Stephan Puissant , Daniel Schlaefli
Polymer Engineering and Science, 2009, 49 (3), pp.432-440. ⟨10.1002/pen.21298⟩
Article dans une revue hal-01716281v1
Image document

Optimization of BEM-Based Cooling Channels Injection Moulding Using Model Reduction

Nicolas Pirc , Fabrice Schmidt , Marcel Mongeau , Florian Bugarin , Francisco Chinesta
International Journal of Material Forming, 2008, 1 (Supplément 1), pp 1043-1046. ⟨10.1007/s12289-008-0197-7⟩
Article dans une revue hal-01008628v1
Image document

A Simplified Method to Determine the 3D Orientation of an Injection Molded Fiber-Filled Polymer

G. Regnier , D. Dray , Eric Jourdain , Sabine Le Roux , Fabrice Schmidt
Polymer Engineering and Science, 2008, 48 (11), pp.2159-2168. ⟨10.1002/pen.21161⟩
Article dans une revue hal-01716282v1
Image document

3D BEM-based cooling-channel shape optimization for injection moulding processes

Nicolas Pirc , Fabrice Schmidt , Marcel Mongeau , Florian Bugarin
International Journal for Simulation and Multidisciplinary Design Optimization, 2008, 2 (3), pp.245-252. ⟨10.1051/ijsmdo:2008033⟩
Article dans une revue hal-01349672v1
Image document

Optimisation of Preform Temperature Distribution For the Stretch-Blow Moulding of PET Bottles

Maxime Bordival , Yannick Le Maoult , Fabrice Schmidt
International Journal of Material Forming, 2008, 1 (Suppl 1), pp.1023-1026. ⟨10.1007/s12289-008-0232-8⟩
Article dans une revue hal-01709503v1
Image document

Identification des contraintes de rupture et de cisaillement à l'interface polymère injecté-moule métallique à l'aide du test couronne

Maelle Guichon , Christine Boher , Bouchra Hassoune Rhabbour , Fabrice Schmidt , Yves Baziard
Matériaux & Techniques, 2008, 96 (n°1-2), p.65-78. ⟨10.1051/mattech:2008024⟩
Article dans une revue hal-01851421v1
Image document

Identification de paramètres de comportement de membranes en polymères durant le procédé de soufflage

Samia Hmida Maamar , Fabrice Schmidt , Laurent Robert , Vincent Velay , Daniel Mercier
Matériaux & Techniques, 2007, 94 (5), pp.371-378. ⟨10.1051/mattech:2007010⟩
Article dans une revue hal-01851430v1
Image document

Thermo-mechanical stresses in cast steel dies during glass pressing process

Gilles Dusserre , Fabrice Schmidt , Gilles Dour , Gérard Bernhart
Journal of Materials Processing Technology, 2005, 162 (SI), pp.484-491. ⟨10.1016/j.jmatprotec.2005.02.088⟩
Article dans une revue hal-01716285v1
Image document

Rheological parameters identification using in situ experimental data of a flat die extrusion

N Lebaal , S Puissant , Fabrice Schmidt
Journal of Materials Processing Technology, 2005, 164, pp.1524-1529. ⟨10.1016/j.jmatprotec.2005.02.218⟩
Article dans une revue hal-01716286v1
Image document

Quantitative infrared thermography applied to blow moulding process: measurement of a heat transfer coefficient

Serge Monteix , Yannick Le Maoult , Fabrice Schmidt , Jean Paul Arcens
Quantitative InfraRed Thermography Journal, 2004, 1 (2), pp.133-150. ⟨10.3166/qirt.1.133-150⟩
Article dans une revue hal-02050658v1
Image document

Modelling of infrared heating of thermoplastic sheet used in thermoforming process

Fabrice Schmidt , Yannick Le Maoult , S Monteix
Journal of Materials Processing Technology, 2003, 143 (SI), pp.225-231. ⟨10.1016/S0924-0136(03)00291-7⟩
Article dans une revue hal-01709512v1
Image document

Voids in short fibre-reinforced injection-moulded parts: density control vs. mass control

G Saint-Martin , Fabrice Schmidt , Pierre Devos , Christophe Levaillant
Polymer Testing, 2003, 22 (8), pp.947-953. ⟨10.1016/S0142-9418(03)00045-X⟩
Article dans une revue hal-01716289v1
Image document

Elastomer biaxial characterization using bubble inflation technique. II: Numerical investigation of some constitutive models

M Rachik , Fabrice Schmidt , N Reuge , Yannick Le Maoult , F Abbe
Polymer Engineering and Science, 2001, 41 (3), pp.532-541. ⟨10.1002/pen.10750⟩
Article dans une revue hal-01709516v1
Image document

Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations

N Reuge , Fabrice Schmidt , Yannick Le Maoult , M Rachik , F Abbe
Polymer Engineering and Science, 2001, 41 (3), pp.522-531. ⟨10.1002/pen.10749⟩
Article dans une revue hal-01709517v1
Image document

Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating

S. Monteix , Yannick Le Maoult , Fabrice Schmidt , R. Ben Yedder , R. W Diraddo
Journal of Materials Processing Technology, 2001, 119 (1-3, SI), pp.90-97. ⟨10.1016/S0924-0136(01)00882-2⟩
Article dans une revue hal-02051043v1
Image document

Analytical models for the inflation of a polymeric tube

Fabrice Schmidt , A. Rodriguez-Villa , Jean-François Agassant , Michel Bellet
European Journal of Mechanics - A/Solids, 2000, 19 (1), pp.89-104. ⟨10.1016/S0997-7538(00)00150-9⟩
Article dans une revue hal-02051036v1
Image document

Numerical simulation of resin transfer molding using linear boundary element method

Fabrice Schmidt , P Lafleur , Florentin Berthet , Pierre Devos
Polymer Composites, 1999, 20 (6), pp.725-732. ⟨10.1002/pc.10396⟩
Article dans une revue hal-01716290v1
Image document

Numerical simulation of failure prediction for ceramic tools: comparison with forging test results

Frédéric Deschaux-Beaume , Fabrice Schmidt , Nicole Fréty , Thierry Cutard , Jean-Claude Boyer
Journal of Materials Processing Technology, 1999, 92-93, pp.502-507. ⟨10.1016/S0924-0136(99)00225-3⟩
Article dans une revue hal-02050668v1
Image document

Moulage par transfert de resine de composites structuraux (C/Ep) : influence des paramètres du procédé et de constitution sur le comportement sous impact et la résistance en compression après impact

Florentin Berthet , Pierre Devos , Fabrice Schmidt , Thierry Ansart
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 1998, 8 (1), p.25-52
Article dans une revue hal-01847834v1
Image document

Failure prediction for ceramic dies in the hot-forging process using FEM simulation

Frédéric Deschaux-Beaume , Fabrice Schmidt , N. Fréty , J.C. Boyer , C. Levaillant
Journal of Materials Processing Technology, 1998, 75 (1-3), pp.100-110. ⟨10.1016/S0924-0136(97)00298-7⟩
Article dans une revue hal-02051047v1
Image document

Experimental study and numerical simulation of the injection stretch/blow molding process

Fabrice Schmidt , Jean-François Agassant , Michel Bellet
Polymer Engineering and Science, 1998, 38 (9), p.1399-1412. ⟨10.1002/pen.10310⟩
Article dans une revue hal-00617038v1
Image document

Viscoelastic simulation of PET stretch/blow molding process

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
Journal of Non-Newtonian Fluid Mechanics, 1996, 64 (1), pp.19 - 42. ⟨10.1016/0377-0257(95)01420-9⟩
Article dans une revue hal-01420909v1
Image document

Dual-scale flow simulation for LCM processes

William Han , Quentin Govignon , Arthur Cantarel , Fabrice Schmidt
ICCM23 - Twenty-third international conference on composite materials, Jul 2023, Belfast, Ireland
Communication dans un congrès hal-04198689v1
Image document

Etude de l'interaction fluide-structure d'un renfort mat avec une résine thermoplastique

Gautier Allusse , Olivier de Almeida , Quentin Govignon , Fabrice Schmidt
JNC23-Journées Nationales sur les composites 2023, association pour les matériaux composites (AMAC), Jul 2023, Besançon, France
Communication dans un congrès hal-04220643v1
Image document

Laser transmission welding of PEKK: Influence of material properties and process parameters on the weld strength

Marcela Matus-Aguirre , Christian Garnier , Rémi Gilblas , Cosson Benoit , Andre Chateau Akue Asseko
ESAFORM 2023 - 26th International Conference on Material Forming, Apr 2023, Cracovie, Poland. pp.1829-1840, ⟨10.21741/9781644902479-198⟩
Communication dans un congrès hal-04086486v1
Image document

Study of the fluid-structure interaction of a mat reinforcement with a thermoplastic resin

Gautier Allusse , Olivier de Almeida , Quentin Govignon , Fabrice Schmidt
ICCM-23-23st international conference on composite materials, Jul 2023, Belfast, Ireland
Communication dans un congrès hal-04216912v1

Thermal conductivity of glass/talc filled Polyamide 12 as function of tapping level

Dylan Seigler , J. Lopez-Cuesta , Yannick Le Maoult , Marcos Batistella , Arnaud Regazzi
PPS 38 - The 38th International Conference of the Polymer Processing Society, May 2023, St Gallen, Switzerland
Communication dans un congrès hal-04172475v1
Image document

Influence of fiber/matrix interface on gas permeability properties of CF/TP composites

Gautier Allusse , Olivier de Almeida , Quentin Govignon , Fabrice Schmidt
ECCM20- Proceedings of the 20th European Conference on Composite Materials, Jun 2022, Lausanne, Switzerland. p. 577-584, ⟨10.5075/epfl-298799_978-2-9701614-0-0⟩
Communication dans un congrès hal-03948387v1
Image document

Numerical Simulation of Recycled PET Preforms Infrared Heating Including Force Convection Effect in the Industrial ISBM Ovens

Anh-Duc Le , Rémi Gilblas , Yannick Le Maoult , Fabrice Schmidt
ESAFORM 2022 - 25th International Conference on Material Forming, Apr 2022, Braga, Portugal. pp.1842-1849, ⟨10.4028/p-66pzhr⟩
Communication dans un congrès hal-03737542v1
Image document

Modeling the reactive PA6 flow for LCM processes

William Han , Quentin Govignon , Arthur Cantarel , Cédric Samuel , Fabrice Schmidt
ESAFORM 2021 - 24th International Conference on Material Forming, Apr 2021, En ligne, Belgium. ⟨10.25518/esaform21.4351⟩
Communication dans un congrès hal-03202647v1
Image document

Vers un modèle thermo-optique des LEDs utilisées dans les systèmes d’éclairage automobile

Clément Rongier , Rémi Gilblas , Fabrice Schmidt , Yannick Le Maoult
SFT 2021 - 29 ème congrès Franças de Thermique, Jun 2021, Belfort (online), France. pp.191-199, ⟨10.25855/SFT2021-024⟩
Communication dans un congrès hal-03260561v1
Image document

Effect of PEEK degradation on commingled fabrics consolidation

Lisa Feuillerat , Olivier de Almeida , Jean-Charles Fontanier , Fabrice Schmidt
ESAFORM 2021 - 24th International Conference on Material Forming, Apr 2021, En ligne, Belgium. ⟨10.25518/esaform21.1985⟩
Communication dans un congrès hal-03202801v1
Image document

Modeling of IR lamps with coated reflector used in the slurry powder impregnation process of composite tapes

Jennifer Mackie , Olivier de Almeida , Fabrice Schmidt , Karine Labastie
ESAFORM 2019 - 22nd International ESAFORM Conference on Material Forming, May 2019, Vitoria-Gasteiz, Spain. ⟨10.1063/1.5112665⟩
Communication dans un congrès hal-02196898v1
Image document

Modélisation de lampes IR avec réflecteur intégré utilisées dans le procédé de fabrication de pré-imprégné thermoplastique

Jennifer Mackie , Olivier de Almeida , Fabrice Schmidt , Karine Labastie
JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 7 p
Communication dans un congrès hal-02421155v1
Image document

Integrity of PEEK in composite semi-finished products and its impact on impregnation

Lisa Feuillerat , Olivier de Almeida , Jean-Charles Fontanier , Fabrice Schmidt
JNC 21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 10 p
Communication dans un congrès hal-02424003v1
Image document

Modelling the shape of an adhesive joint during assembly

William Han , Florentin Berthet , Gilles Dusserre , Fabrice Schmidt
ICSAAM 2018 - The 8th International Conference on Structural Analysis of Advanced Materials, Aug 2018, Tarbes, France
Communication dans un congrès hal-02057725v1
Image document

Inverse method to estimate the size of scatterers in semi-crystalline thermoplastics via laser scattering and spectroscopic analyses

Sinan Boztepe , Rémi Gilblas , Olivier de Almeida , Fabrice Schmidt , Yannick Le Maoult
26éme congrès de la Société Française de Thermique ( SFT ), May 2018, Pau, France
Communication dans un congrès hal-02064311v1
Image document

Cost-effective computational method for radiation heat transfer in semi-crystalline polymers

Sinan Boztepe , Rémi Gilblas , Olivier de Almeida , Yannick Le Maoult , Fabrice Schmidt
ESAFORM 2018 - 21st International ESAFORM Conference on Material Forming, Apr 2018, Palermo, Italy. pp.art.120005, ⟨10.1063/1.5034973⟩
Communication dans un congrès hal-01818602v1
Image document

Characterisation and modelling of the temperature and rate dependent shear behaviour of a non-consolidated powder impregnated fabric

T. Baumard , G. H. Menary , Olivier de Almeida , Fabrice Schmidt , J Bikard
ECCM18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. pp.24 - 28
Communication dans un congrès hal-02064283v1
Image document

A non-invasive experimental approach for surface temperature measurements on semi-crystalline thermoplastics

Sinan Boztepe , Rémi Gilblas , Olivier de Almeida , Yannick Le Maoult , Fabrice Schmidt
ESAFORM 2017 - 20h International ESAFORM conference on Material Forming, Apr 2017, Dublin, Ireland. pp.060007, ⟨10.1063/1.5008070⟩
Communication dans un congrès hal-01613022v1
Image document

The role of microcrystalline structure on the temperature-dependent thermo-optical properties of semi-crystalline thermoplastics and non-invasive temperature measurements

Sinan Boztepe , Rémi Gilblas , Olivier de Almeida , Fabrice Schmidt , Yannick Le Maoult
SFT 2017 - Congrès annuel de la Société Française de Thermique, May 2017, Marseille, France
Communication dans un congrès hal-01617169v1
Image document

Simulation de la mise en forme de tissus préimprégnés par thermoformage

T. Baumard , Olivier de Almeida , G. Menary , Fabrice Schmidt , J. Bikard
JST Mise en Oeuvre des Composites à Matrice Thermoplastique, 2017, Toulouse, France
Communication dans un congrès hal-02047624v1
Image document

Towards a coupled heating-forming simulation of the thermoforming of thermoplastic composites

Theo Baumard , Gary H. Menary , Olivier de Almeida , Fabrice Schmidt , Peter Martin
ESAFORM 2017 - 20h International ESAFORM conference on Material Forming, Apr 2017, Dublin, France. ⟨10.1063/1.5008022⟩
Communication dans un congrès hal-01629284v2

Infrared Radiation applied to Blow Molding and thermoforming

Yannick Le Maoult , Fabrice Schmidt
32nd International Conference of the POLYMER PROCESSING SOCIETY, Jul 2016, Lyon, France
Communication dans un congrès hal-02049835v1

Identification of the temperature dependent relation between thermo-optical properties and morphology of semi-crystalline thermoplastics for thermoforming process

Sinan Boztepe , Olivier de Almeida , Yannick Le Maoult , Fabrice Schmidt
32nd International Conference of the POLYMER PROCESSING SOCIETY, Jul 2016, Lyon, France
Communication dans un congrès hal-02081025v1
Image document

Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics

Sinan Boztepe , Abdoulahad Thiam , Olivier de Almeida , Yannick Le Maoult , Fabrice Schmidt
ESAFORM 2016 - 19th International ESAFORM Conference on Material Forming, Apr 2016, Nantes, France. art. 020006 - 7 p., ⟨10.1063/1.4963410⟩
Communication dans un congrès hal-01609025v1
Image document

Determination of Thermal Contact Conductance in Vacuum-Bagged Thermoplastic Prepreg Stacks Using Infrared Thermography

Theo Baumard , Olivier de Almeida , Gary Menary , Yannick Le Maoult , Fabrice Schmidt
ESAFORM 2016 - PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING, Apr 2016, Nantes, France. art. 110002- 6 p., ⟨10.1063/1.4963511⟩
Communication dans un congrès hal-01609112v1
Image document

Infrared welding process on composite: Effect of interdiffusion at the welding interface

Andre Chateau Akue Asseko , Eric Lafranche , Benoît Cosson , Fabrice Schmidt , Yannick Le Maoult
ESAFORM 2016 - 19th International ESAFORM Conference on Material Forming, Apr 2016, Nantes, France. art.020011 - 6 p., ⟨10.1063/1.4963415⟩
Communication dans un congrès hal-01609023v1
Image document

Coupled heating-forming simulation of the thermoforming of thermoplastic composites

Theo Baumard , Olivier de Almeida , Gary Menary , Fabrice Schmidt , Peter Martin
ITHEC 2016 - 3rd International conference & exhibition on thermoplastic composites, Oct 2016, Bremen, Germany. p.20-23
Communication dans un congrès hal-01719631v1
Image document

Thermal modeling in composite transmission laser welding process: light scattering and absorption phenomena coupling

Andre Chateau Akue Asseko , Benoît Cosson , Fabrice Schmidt , Rémi Gilblas , Yannick Le Maoult
ESAFORM 2014 - 17th Conference of the European Scientific Association on Material forming, 2014, Espoo, Finland. p.1560-1567, ⟨10.4028/www.scientific.net/KEM.611-612.1560⟩
Communication dans un congrès hal-01625032v1
Image document

Micro-scale modeling of resin flow by BEM- Permeability computation

M.Q. Thai , Fabrice Schmidt , Gilles Dusserre , Arthur Cantarel , L. Silva
International conference on COmputational methods in Manufacturing Processes, 2014, Saint-Etienne, France
Communication dans un congrès hal-02053410v1
Image document

Effect of moisture on the behaviour of an extruded clay paste

Jérémie Vignes , Fabrice Schmidt , Gilles Dusserre , Jean Frederic Dalmasso
ESAFORM 2013 - 16th Annual ESAFORM conference on material forming, Apr 2013, Aveiro, Portugal. pp.2230-2236, ⟨10.4028/www.scientific.net/KEM.554-557.2230⟩
Communication dans un congrès hal-01687320v1
Image document

Modélisation des échanges radiatifs dans un système d'éclairage automobile par la méthode de Monte-Carlo

Myriam Dauphin , Stéphane Albin , Christine Roucoules , Yannick Le Maoult , Fabrice Schmidt
SFT ( Congrès Société Française de Thermique), May 2013, Gérardmer, France
Communication dans un congrès hal-02057100v1
Image document

Simulation of IR Heating for Composite Stamping

Abdelmagid El Bakali , Olivier de Almeida , Jérôme Bikard , Maxime Villière , Fabrice Schmidt
ESAFORM 2013 - 16th Annual ESAFORM conference on material forming, Apr 2013, Aveiro, Portugal. p.1523-1529, ⟨10.4028/www.scientific.net/KEM.554-557.1523⟩
Communication dans un congrès hal-01578974v1
Image document

Simulations of an Infrared Composite Curing Process

Sawsane Nakouzi , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
ESAFORM 2013 - 16th Annual ESAFORM conference on material forming, Apr 2013, Aveiro, Portugal. pp.1517-1522, ⟨10.4028/www.scientific.net/KEM.554-557.1517⟩
Communication dans un congrès hal-01687312v1
Image document

Experimental determination and modeling of thermal conductivity tensor of carbon/epoxy composite.

Damien Lecointe , Maxime Villiere , Sawsane Nakouzi , Vincent Sobotka , Nicolas Boyard
ESAFORM 2012 - 15th International ESAFORM Conference on material forming, Mar 2012, Erlangen, Germany. pp.1091-1096, ⟨10.4028/www.scientific.net/KEM.504-506.1091⟩
Communication dans un congrès hal-01687331v1
Image document

Optimization of the incident IR heat flux upon a 3D geometry composite part (Carbon/Epoxy)

Sawsane Nakouzi , Florentin Berthet , D. Delaunay , Yannick Le Maoult , Fabrice Schmidt
15th International ESAFORM Conference on material forming (ESAFORM 2012), Mar 2012, Erlangen, Germany. pp.1085-1090, ⟨10.4028/www.scientific.net/KEM.504-506.1085⟩
Communication dans un congrès hal-01687330v1
Image document

Numerical simulations of clay tiles compression

Jérémie Vignes , Fabrice Schmidt , Gilles Dusserre , Olivier de Almeida , Jean Frederic Dalmasso
ESAFORM 2012 - 15th International ESAFORM Conference on material forming, Mar 2012, Erlangen, Germany. pp.1403-1408, ⟨10.4028/www.scientific.net/KEM.504-506.1403⟩
Communication dans un congrès hal-01687321v1
Image document

Towards thermal model of automotive lamps

Myriam Dauphin , Stéphane Albin , Mouna El-Hafi , Yannick Le Maoult , Fabrice Schmidt
QIRT 2012 -11th International conference on Quantitative InfraRed Thermography, Jun 2012, Naples, Italy. 10 p., ⟨10.21611/qirt.2012.262⟩
Communication dans un congrès hal-01741831v1
Image document

Infrared curing simulations of liquid composites molding

Sawsane Nakouzi , J. Pancrace , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
ESAFORM - 14th International Esaform conference on material forming, Apr 2011, Belfast, United Kingdom. pp.1125-1130, ⟨10.1063/1.3589667⟩
Communication dans un congrès hal-01709493v1
Image document

Cartes de température maximum lors de la simulation de la réticulation de la résine RTM 6 dans une plaque composite

Florentin Berthet , Sawsane Nakouzi , Fabrice Schmidt , Yannick Le Maoult
17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.57
Communication dans un congrès hal-00597932v1
Image document

Simulation de la polymérisation par infrarouge du composite

Sawsane Nakouzi , Johann Pancrace , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
SFT, May 2011, Perpignan, France
Communication dans un congrès hal-02057091v1
Image document

Evolution de la microstructure et influence de la pollution atmosphérique lors de la mise en oeuvre d'une résine thermodurcissable

Johann Pancrace , Pascal Lamesle , Élisabeth Rodier , Fabrice Schmidt , Yannick Le Maoult
Matériaux 2010, Oct 2010, Nantes, France. 9 p
Communication dans un congrès hal-01768699v1
Image document

A ray tracing method to simulate the infrared heating of semi-transparent thermoplastics

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult , Benoît Cosson , B. Plantamura
ESAFORM 2010 -13th International ESAFORM conference on material forming, Apr 2010, Brescia, Italy. 4 p
Communication dans un congrès hal-01760283v1
Image document

Mold filling simulation of resin transfer molding combining BEM and level set method

Renaud Gantois , Arthur Cantarel , Gilles Dusserre , Jean-Noël Felices , Fabrice Schmidt
ACMA 2010 -International symposium on composites and aircraft materials, May 2010, Marrakech, Morocco. 8 p
Communication dans un congrès hal-01764788v1
Image document

Simulation du chauffage infrarouge des composites

Sawsane Nakouzi , Johann Pancrace , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
Matériaux 2010, Oct 2010, Nantes, France. 11 p
Communication dans un congrès hal-01771341v1
Image document

Curing simulation of composites coupled with infrared heating

Sawsane Nakouzi , Johann Pancrace , Fabrice Schmidt , Yannick Le Maoult , Florentin Berthet
ESAFORM 2010 -13th International ESAFORM conference on material forming, Apr 2010, Brescia, Italy. 4 p
Communication dans un congrès hal-01760278v1
Image document

Numerical simulation of resin transfer molding using BEM and level set method

Renaud Gantois , Arthur Cantarel , Gilles Dusserre , Jean-Noël Felices , Fabrice Schmidt
ESAFORM 2010 -13th International ESAFORM conference on material forming, Apr 2010, Brescia, Italy. 4 p
Communication dans un congrès hal-01764786v1
Image document

BEM Simulation Of 3D Updated Resin Front For LCM Processes

R. Gantois , Arthur Cantarel , Jean-Noël Felices , Nicolas Pirc , Fabrice Schmidt
ICSAAM 2009 - International Conference on Structural Analysis of Advanced Materials, Sep 2009, Tarbes, France. pp.131-136, ⟨10.4028/www.scientific.net/KEM.446.131⟩
Communication dans un congrès hal-01716279v1

Thickness Optimisation of Inflated Preforms by Varying Infrared Heating Coefficients

Maxime Bordival , Yannick Le Maoult , Fabrice Schmidt
3ème congrès Rotomoulage, Thermoformage et Soufflage, Mar 2009, Albi, France
Communication dans un congrès hal-02194626v1
Image document

BEM simulation of 3D updated resin front for LCM processes

Renaud Gantois , Arthur Cantarel , Jean-Noël Felices , Nicolas Pirc , Fabrice Schmidt
ICSAAM 2009 -International Conference on Structural Analysis of Advanced Materials, Sep 2009, Tarbes, France. pp.131-136
Communication dans un congrès hal-01760285v1
Image document

Numerical Infrared Heating of semi-transparent Thermoplastic Using Ray Tracing Method

Cosson Benoit , Fabrice Schmidt , Yannick Le Maoult
ESAFORM CONFERENCE ON MATERIAL FORMING, Apr 2009, Enschede, Netherlands
Communication dans un congrès hal-02057084v1
Image document

Quantification 2-D et 3-D de la porosité par analyse d'images dans les matériaux composites stratifiés aéronautiques

Yohann Ledru , Robert Piquet , Laurent Michel , Fabrice Schmidt , Gérard Bernhart
JNC 16, Jun 2009, Toulouse, France. 11 p
Communication dans un congrès hal-00386035v1
Image document

Optimization of 3D Cooling Channels in Injection Molding using DRBEM and Model Reduction

Nicolas Pirc , Fabrice Schmidt , Marcel Mongeau , Florian Bugarin , Francisco Chinesta
12th International ESAFORM Conference on Material Forming, Apr 2009, Enschede, Netherlands
Communication dans un congrès hal-01008627v1
Image document

Comparaison between two designs of experiment using the response surface method in order to optimize the velocity distribution in a coat hanger die

Nadhir Lebaal , Stéphan Puissant , Fabrice Schmidt
AMPT 2008 -Advances in Materials and Processing Technologies, Nov 2008, Manama, Bahrain. 20 p
Communication dans un congrès hal-01760290v1

Infra-red sheet heating assisted Superplastic Forming

Gérard Bernhart , Thierry Cutard , Yannick Le Maoult , Fabrice Schmidt , Jean Paul Arcens
EuroSPF2008 - 6th European Conference on Superplastic Forming, Sep 2008, Carcassonne, France
Communication dans un congrès hal-02057069v1

Stress distribution measurement inside ball screw system using photoelasticity technique

Romuald Bertolaso , François Ronde Oustau , Mohammed Cheikh , Fabrice Schmidt
Photomechanics, Jul 2008, Loughborough, United Kingdom
Communication dans un congrès hal-02056740v1
Image document

Modeling of void growth mechanisms during the manufacturing of composite laminates

Yohann Ledru , Robert Piquet , Fabrice Schmidt , Laurent Michel , Gérard Bernhart
9th International Conference on Flow Processes in Composite Materials - FPCM-9 (2008), Jul 2008, Montréal, Canada. pp.1-9
Communication dans un congrès hal-01690568v1
Image document

Optimization of coat-hanger melt distributors for the wire coating process

Nadhir Lebaal , Fabrice Schmidt , Stephan Puissant , Daniel Schläfli
Proceedings of the Polymer Processing Society, Jun 2008, Salerno, Italy
Communication dans un congrès hal-02056716v1
Image document

Optimization of BEM-based cooling channels injection moulding using model reduction

Nicolas Pirc , Fabrice Schmidt , Marcel Mongeau , Florian Bugarin , Francisco Chinesta
ESAFORM 2008 -11th International ESAFORM conference on material forming, Apr 2008, Lyon, France. 4 p
Communication dans un congrès hal-01764796v1
Image document

Optimisation of preform temperature distribution for the stretch-blow moulding of PET bottles

Maxime Bordival , Yannick Le Maoult , Fabrice Schmidt
ESAFORM 2008 -The 11th international ESAFORM conference on material forming, Apr 2008, Lyon, France. 4 p
Communication dans un congrès hal-01764797v1
Image document

BEM-based cooling channel optimization for 3D injection molding

Nicolas Pirc , Florian Bugarin , Fabrice Schmidt , Marcel Mongeau
1st International conference on multidisciplinary design optimization and application, Apr 2007, Besançon, France. 6 p
Communication dans un congrès hal-01760294v1
Image document

Simulation of the two stages stretch-blow molding process: Infrared heating and blowing modeling

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult , Vincent Velay
NUMIFORM 2007 - 9th International conference on numerical methods in industrial forming processes, Jun 2007, Porto, Portugal. pp.519+
Communication dans un congrès hal-01703248v1
Image document

Cooling channel optimization for injection molding

Nicolas Pirc , Florian Bugarin , Fabrice Schmidt , Marcel Mongeau
NUMIFORM 07: Materials Processing and Design: Modeling, Simulation and Applications, Jun 2007, Porto, Portugal. p.525-530, ⟨10.1063/1.2740864⟩
Communication dans un congrès hal-01354303v1
Image document

Determination of the elongational properties of polymers using a mixed numerical-experimental method

Laurent Robert , Samia Hmida Maamar , Vincent Velay , Fabrice Schmidt
ICEM13 - 13th International conference on experimental mechanics, Jul 2007, Alexanroupolis, Greece. 8 p., ⟨10.1007/978-1-4020-6239-1_331⟩
Communication dans un congrès hal-01818874v1
Image document

Optimizations of coat-hanger die, using constraint optimization algorithm and Taguchi method

Nadhir Lebaal , Fabrice Schmidt , Stephan Puissant
NUMIFORM 2007 - 9th International conference on numerical methods in industrial forming processes, Jun 2007, Porto, Portugal. pp.537-542
Communication dans un congrès hal-01716283v1
Image document

Behaviour model identification based on inverse modeling and using Optical Full Field Measurements (OFFM): application on rubber and steel

Vincent Velay , Laurent Robert , Fabrice Schmidt , S. Hmida , T. Vallet
10th ESAFORM conference on material forming, Apr 2007, Zaragoza, Spain. pp.33-38
Communication dans un congrès hal-01703249v1
Image document

Measurement of thermal contact resistance between the mold and the polymer for the stretch-blow molding process

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult , Elian Coment
10th ESAFORM conference on material forming, Apr 2007, Zaragoza, Spain. p.1245-1250
Communication dans un congrès hal-01709507v1
Image document

Numerical modelling and optimization of infrared heating system for the blow moulding process

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult
ESAFORM 2006 -9th International conference on material forming, Apr 2006, Glasgow, United Kingdom. p.511-514
Communication dans un congrès hal-01788412v1

Parameters identification using field measurements of polymer membranes during bubble inflation technique

Samia Hmida Maamar , Fabrice Schmidt , Laurent Robert , Vincent Velay
Photomecanics 2006, Jul 2006, Clermont-Ferrand, France. 18 p
Communication dans un congrès hal-01788413v1
Image document

Optimization of 3D die extrusion using response surface method

Nadhir Lebaal , Fabrice Schmidt , Stéphan Puissant
ESAFORM 2006 -9th International conference on material forming, Apr 2006, Glasgow, United Kingdom. p.703-706
Communication dans un congrès hal-01788407v1

Optimisation of infrared heating system for thermoforming and blow molding processes

Maxime Bordival , Fabrice Schmidt , Yannick Le Maoult , Cédric Champin
PPS-2005: America Regional Meeting, Aug 2005, Québec, Canada
Communication dans un congrès hal-02056689v1
Image document

Thermo-mechanical stresses in cast steel dies during glass pressing process

Gilles Dusserre , Fabrice Schmidt , Gilles Dour , Gérard Bernhart
AMPT'2005 -8th International Conference on Advances in Materials and Processing Technologies, May 2005, Gliwice-WIsla, Poland. 4 p
Communication dans un congrès hal-01788416v1
Image document

Optimization of infrared heating system for the thermoforming process

Maxime Bordival , Sylvia Andrieu , Fabrice Schmidt , Yannick Le Maoult , Serge Monteix
ESAFORM 2005 -8th ESAFORM conference on material forming, Apr 2005, Cluj-Napoca, Romania. p.925-928
Communication dans un congrès hal-01788422v1
Image document

A study of polymer-mold contact during injection molding cycle

Maelle Guichon , Christine Boher , Fabrice Schmidt
PPS 2005 -America's regional meeting of the Polymer Processing Society, Aug 2005, Quebec City, Canada. 2 p
Communication dans un congrès hal-01796836v1
Image document

Identification des paramètres rhéologique à l'aide d'une méthode d'optimisation appliquée à l'extrusion en 3D

Nadhir Lebaal , Fabrice Schmidt , Stephan Puissant
17e Congrès Français de Mécanique, Aug 2005, Troyes, France
Communication dans un congrès hal-01798901v1
Image document

Rheological parameters identification using in-situ experimental data of a flat die extrusion

Nadhir Lebaal , Stéphan Puissant , Fabrice Schmidt
AMPT'2005 -8th International Conference on Advances in Materials and Processing Technologies, May 2005, Gliwice-WIsla, Poland. 4 p
Communication dans un congrès hal-01788421v1
Image document

3D finite modeling of the blow molding process

Cédric Champin , Michel Bellet , Fabrice Schmidt , Jean François Agassant , Yannick Le Maoult
ESAFORM 2005 -8th ESAFORM conference on material forming, Apr 2005, Cluj-Napoca, Romania. p.905-908
Communication dans un congrès hal-01796837v1
Image document

Mesures infrarouges appliquées à la modélisation du thermoformage

Sylvia Andrieu , Fabrice Schmidt , Yannick Le Maoult
Colloque photomécanique 2004, May 2004, Albi, France. p.177-184
Communication dans un congrès hal-01798903v1
Image document

3D finite element modeling of the blow molding process

Cédric Champin , Michel Bellet , Fabrice Schmidt , Jean François Agassant , Yannick Le Maoult
Polymer Processing Society 20th anniversary celebration, Jun 2004, Akron, United States. 14 p
Communication dans un congrès hal-01796840v1

Measurements of the full 3D orientation tensor of an injection molded fiber-filled polymer

G. Régnier , X. Bardet , D. Dray , E. Jourdain , Fabrice Schmidt
Europe-China Symposium on Reinforced Polymers, 2004, Nancy, France
Communication dans un congrès hal-00115699v1
Image document

Automatic optimization of the cooling of injection mold based on the boundary element method

E Mathey , Luc Penazzi , Fabrice Schmidt , F Ronde-Oustau
NUMIFORM 2004 - 8th International conference on numerical methods in industrial forming processes, Jun 2004, Columbus, United States. pp.222-227
Communication dans un congrès hal-01716287v1
Image document

Quantitative infrared thermography applied to blow moulding process : measurement of a heat transfer coefficient

Serge Monteix , Yannick Le Maoult , Fabrice Schmidt , Jean-Paul Arcens
QIRT'2004 -7th International Conference on Quantitative Infrared Thermography, Jul 2004, Rhode-St-Genèse, Belgium. p. F.2.1-F.2.7, ⟨10.3166/qirt.1.133-150⟩
Communication dans un congrès hal-01788430v1
Image document

Experimental and numerical infrared heating of thermoplastic sheet during thermoforming process

Sylvia Andrieu , Fabrice Schmidt , Yannick Le Maoult
Polymer Processing Society 20th anniversary celebration, Jun 2004, Akron (Ohio), United States. 9 p
Communication dans un congrès hal-01796841v1
Image document

Measurements of the full 3D orientation tensor of an injection molded fiber-filled polymer

X. Bardet , D. Dray , G. Régnier , E. Jourdain , Fabrice Schmidt
Europe-China Symposium on Reinforced Polymers, 2004, Nancy, France
Communication dans un congrès hal-04179330v1
Image document

Heat conditioning modelling of thermoforming process: comparison with experiments

Sylvia Andrieu , Fabrice Schmidt , Yannick Le Maoult
International Conference of Polymer Processing Society, Jul 2003, Melbourne, Australia
Communication dans un congrès hal-02056649v1
Image document

A quantitative comparison of experimental and numerical orientation and mechanical results in meldlines of short fibre reinforced thermoplastics

Eric Jourdain , Gilles Saint Martin , Fabrice Schmidt , Eric Haramburu
6th conference ESAFORM 2003, Apr 2003, Salerno, Italy. 4p
Communication dans un congrès hal-01796846v1
Image document

Comparaison du comportement thermique des moules d'injection plastique obtenus par stratoconception selon la technique d'assemblage

Eliette Mathey , Luc Penazzi , Fabrice Schmidt , François Ronde Oustau
Colloque national MECAMAT, Jan 2003, Aussois, France. 4 p
Communication dans un congrès hal-01798913v1
Image document

Thermal transfer in laminated injection moulds and comparison of the mould assembly techniques

Eliette Mathey , Luc Penazzi , Fabrice Schmidt , François Ronde Oustau
ESAFORM 2003 -6th ESAFORM conference on material forming, Apr 2003, Salerno, Italy. p.63-66
Communication dans un congrès hal-01788433v1
Image document

Advanced controls and measurements for the injection molding of a short fiber reinforced polymer

Gilles Saint Martin , Christophe Levaillant , P. Devos , Fabrice Schmidt
PPS-18 -18th annual meeting of polymer processing society, Jun 2002, Guimaraes, Portugal. 17p
Communication dans un congrès hal-01796850v1
Image document

Dispersive prediction of single-screw extruder with mixing head using Boundary Element Method

Ibrahim Busuladzic , Fabrice Schmidt , Pierre G. Lafleur
International Conference of Polymer Processing Society,, Jun 2002, Guimarès, Portugal
Communication dans un congrès hal-02056355v1
Image document

Short-fibre Reinforced Thermoplastic for Semi-structural Parts: Process-properties

Eric Haramburu , Francis Collombet , Bernard Ferret , Jean-Stéphane Vignes , Pierre Devos
Proceeding of the 8th Euro-Japanese Symposium, 2002, Toulouse, France
Communication dans un congrès hal-02057199v1
Image document

Infrared Heating Modeling of Thermoplastic Sheets in Thermoforming Process

Sylva Andrieu , Yannick Le Maoult , Fabrice Schmidt
International Conference of Polymer Processing Society, Jun 2002, Guimarès, Portugal
Communication dans un congrès hal-02056363v1
Image document

Recent Issues In Preform Radiative Heating Modelling

Serge Monteix , Fabrice Schmidt , Yannick Le Maoult , Gérard Denis , Murielle Vigny
International Conference of Polymer Processing Society, May 2001, Montréal, Canada
Communication dans un congrès hal-02056325v1
Image document

Modeling of Infrared Heating of Thermoplastic Sheet Used in Thermoforming Process

Fabrice Schmidt , Yannick Le Maoult , S Monteix
International Conference on Advances in Materials And Processing Technologies (AMPT), Sep 2001, Leganes, Spain. ⟨10.1016/S0924-0136(03)00291-7⟩
Communication dans un congrès hal-02055829v1
Image document

Comparison between a numerical model and an experimental approach of preform infrared radiative heating-recent results

S Monteix , Fabrice Schmidt , Yannick Le Maoult , G Denis , M Vigny
CHT'01 advances in computational heat transfer II, May 2001, Palm Cove, Australia. pp.1017-1024
Communication dans un congrès hal-01709515v1

L'approche probabiliste de la rupture en dimensionnement de structures fragiles : application à la conception d'outils de mise en forme en céramique

Frédéric Deschaux Beaume , Nicole Frety , Fabrice Schmidt , Thierry Cutard
MECAMAT, Jan 2001, Aussois, France. p.151-154
Communication dans un congrès hal-01798920v1
Image document

Comparison Between a Numerical Model and an Experimental Approach of Preform Infrared Radiative Heating – Recent Results

Serge Monteix , Fabrice Schmidt , Yannick Le Maoult , Gérard Denis , Murielle Vigny
CHT’01 (International Symposium on Advances in Computational Heat Transfer), May 2001, Queensland, Australia
Communication dans un congrès hal-02056307v1
Image document

Thermographie infrarouge appliquée à la mise en forme des bouteilles en P.E.T.

Serge Monteix , Yannick Le Maoult , Fabrice Schmidt , Jean-Paul Arcens
Thermogram' 2001, Oct 2001, Lieusaint, France. p.247-256
Communication dans un congrès hal-01798925v1
Image document

Analysis of influent parameters during infrared radiative heating of PET preform

Fabrice Schmidt , Serge Monteix , Yannick Le Maoult , Gérard Denis
International Conference of Polymer Processing Society, Jun 2000, Shangaï, China
Communication dans un congrès hal-02056287v1

Modélisation du chauffage infrarouge de préformes en PET

Serge Monteix , Fabrice Schmidt , Yannick Le Maoult , R. Ben Yedder , R. W. Diraddo
4ème colloque interuniversitaire franco-québécois, May 1999, Montréal, Canada. 9 p
Communication dans un congrès hal-01799205v1
Image document

Inflation Technique Optimization for an Elastomer Biaxial Characterization

Fabrice Schmidt , Nicolas Reuge , Yannick Le Maoult , Jean Paul Arcens , B. David
International Conference of Polymer Processing Society, May 1999, Hertogenbosch, Netherlands
Communication dans un congrès hal-02056274v1
Image document

Experimental study and numerical simulation of preform or sheet infra-red radiative heating

Serge Monteix , Fabrice Schmidt , Yannick Le Maoult
AMPT'99 -Advances in Materials and Processing Technologies, Aug 1999, Dublin, Iran. 10 p
Communication dans un congrès hal-01799141v1
Image document

Numerical simulation of RTM using boundary element method

Fabrice Schmidt , Pierre Lafleur , Florentin Berthet , Pierre Devos
NUMIFORM'98 -6th International Conference on Numerical Methods in Industrial Forming Processes, Jun 1998, Enschede, Netherlands. p.453-457
Communication dans un congrès hal-01799150v1
Image document

Profiled infrared radiative heating in blow moulding and thermoforming

Serge Monteix , Fabrice Schmidt , Yannick Le Maoult , R. W Diraddo
PPS’98 - North American Meeting, Aug 1998, Toronto, Canada
Communication dans un congrès hal-02056197v1
Image document

Numerical Simulation of Failure Prediction for Ceramics Tools: Comparison with Forging Test Results

Frédéric Deschaux-Beaume , Fabrice Schmidt , Nicole Fréty , Thierry Cutard , J.C. Boyer
Advances in Materials and Processing Technologies (AMPT) 1997, Jul 1997, Guimarães, Portugal
Communication dans un congrès hal-02053574v1
Image document

Measurement and Calculation of Preform Infrared Heating a first approach

Yannick Le Maoult , Fabrice Schmidt , V Laborde , Mouna El-Hafi , Philippe Lebaudy
4th International Workshop on Advanced Infrared Technology and Applications, Sep 1997, Florence, Italy
Communication dans un congrès hal-02056160v1

Modélisation du chauffage infrarouge de préformes

Vincent Laborde , Mouna El-Hafi , Yannick Le Maoult , Fabrice Schmidt
SFT 97 -Congrès annuel de la Société Française des Thermiciens, May 1997, Toulouse, France. p.699-706
Communication dans un congrès hal-01799211v1
Image document

Experimental Study of the injection stretch/blow molding process

Fabrice Schmidt , Jean-François Agassant , Michel Bellet
Proceeding of the ANTEC ‘97, Society of Plastics Engineers, Apr 1997, Toronto, Canada
Communication dans un congrès hal-02053552v1
Image document

RTM CARBON COMPOSITES: INFLUENCE OF PROCESS PARAMETERS ON COMPRESSION STRENGTH AFTER IMPACT

Florentin Berthet , Pierre Devos , Thierry Ansart , Fabrice Schmidt
ICCM 11 -11th International conference on composites materials, Jul 1997, Melbourne, Australia. 28 p
Communication dans un congrès hal-01799214v1

3D simulation of gob transfer in the delivery system on a glass bottle production machine

Norbert Feraud , Fabrice Schmidt , Christophe Levaillant
INTERNATIONAL USER'S CONFERENCE OF ABAQUS 96, May 1996, New-York, United States
Communication dans un congrès hal-01799158v1
Image document

Analytic Models for the Simultaneous Inflation and Extension of a Polymeric Tube

Fabrice Schmidt , Jean-François Agassant , Michel Bellet
12th International Conference of Polymer Processing Society, May 1996, Sorrentp, Italy
Communication dans un congrès hal-02053487v1
Image document

Thermomechanical Simulation of PET Stretch/Blow Molding

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
10th International Conference of Polymer Processing Society, Apr 1994, Akron, United States
Communication dans un congrès hal-02053547v1
Image document

Viscoelastic Simulation of P.E.T Stretch/Blow Molding

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
9th International Conference of the Polymer Processing Society, Apr 1993, Manchester, United Kingdom
Communication dans un congrès hal-02053322v1

Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
Colloque National GFP, Nov 1992, Lyon, France
Communication dans un congrès hal-02057172v1

Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Gérard Denis
Colloque National Matériaux: Science et industrie, Jun 1992, Paris, France
Communication dans un congrès hal-02057168v1
Image document

Numerical Simulation of Polyester Stretch/Blow Molding Process

Fabrice Schmidt , Jean François Agassant , Michel Bellet , G. Denis
Numerical Methods in Industrial Forming Processes, 1992, sophia-antipolis, France
Communication dans un congrès hal-02017895v1

Frittage sélectif par laser (SLS) : Compréhension des interactions rayonnement-matière par des caractérisations thermo-optiques du polyamide 12 chargé

Dylan Seigler , J. Lopez-Cuesta , Yannick Le Maoult , Marcos Batistella , Arnaud Regazzi
Colloque IMT - Modélisation, contrôle et optimisation des procédés : de la donnée au jumeau numérique, Mar 2023, Mines Saint-Étienne, France. 2023
Poster de conférence hal-04136232v1
Image document

Infrared radiation applied to polymer processes

Yannick Le Maoult , Fabrice Schmidt
Extrait de : Heat transfer in polymer composite materials (chap. 13) / sous la dir. de N. BOYARD, John Wiley; ISTE, p.385-423, 2016, Mechanical engineering and solid mechanics series, 978-1-84821-761-4. ⟨10.1002/9781119116288.ch13⟩
Chapitre d'ouvrage hal-01725430v1
Image document

On the use of reduced bases in optimization of injection molding

Francisco Chinesta , Fabrice Schmidt
José Antonio Covas; Antonio Gaspar-Cunha. Optimization in polymer processing, Nova Science Publishers, pp.169-194, 2011, 9781611228182
Chapitre d'ouvrage hal-01007527v1