Nombre de documents

210

Publications Eric Maire


Article dans une revue156 documents

  • Clementine Helfenstein-Didier, Damien Taïnoff, Julien Viville, Jérôme Adrien, Eric Maire, et al.. Tensile rupture of medial arterial tissue studied by X-ray micro-tomography on stained samples. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 78, pp.362 - 368. 〈10.1016/j.jmbbm.2017.11.032〉. 〈hal-01659507〉
  • Clémence Petit, Eric Maire, Sylvain Meille, Jérome Adrien. Two-scale study of the fracture of an aluminum foam by X-ray tomography and finite element modeling. Materials & Design, 2017, 120, pp.117--127. 〈hal-01538187〉
  • Pierre Manil, François Nunio, Yamen Othmani, Véronique Aubin, Jean-Yves Buffiere, et al.. A Numerical Approach for the Mechanical Analysis of Superconducting Rutherford-Type Cables Using Bimetallic Description. IEEE Transactions on Applied Superconductivity, Institute of Electrical and Electronics Engineers, 2017, 27 (4), pp.1 - 6. 〈10.1109/TASC.2017.2664803〉. 〈hal-01647116〉
  • Pierre Manil, François Nunio, Yamen Othmani, Véronique Aubin, Jean-Yves Buffière, et al.. A Numerical Approach for the Mechanical Analysis of Superconducting Rutherford-Type Cables Using Bimetallic Description. IEEE Transactions on Applied Superconductivity, Institute of Electrical and Electronics Engineers, 2017, 27 (4), 〈10.1109/TASC.2017.2664803〉. 〈hal-01528578〉
  • Amine Bouterf, Jérome Adrien, Eric Maire, Xavier Brajer, François Hild, et al.. Identification of the crushing behavior of brittle foam: From indentation to oedometric tests. Journal of the Mechanics and Physics of Solids, Elsevier, 2017, 98, pp.181--200. 〈hal-01538015〉
  • Clémence Petit, Sylvain Meille, Eric Maire, Laurent Gremillard, Jérome Adrien, et al.. Fracture behavior of robocast HA/β-TCP scaffolds studied by X-ray tomography and finite element modeling. Journal of the European Ceramic Society, Elsevier, 2017, 37 (4), pp.1735--1745. 〈hal-01538186〉
  • Morgane Mokhtari, Christophe Le Bourlot, Jérome Adrien, Sylvain Dancette, Takeshi Wada, et al.. Cold-rolling influence on microstructure and mechanical properties of NiCr-Ag composites and porous NiCr obtained by liquid metal dealloying. Journal of Alloys and Compounds, Elsevier, 2017, 707, pp.251--256. 〈hal-01538188〉
  • Éric Maire, Lionel Hernandez, Aurélien Etiemble, Thierry Douillard, Driss Mazouzi, et al.. A Facile and Very Effective Method to Enhance the Mechanical Strength and the Cyclability of Si-Based Electrodes for Li-Ion Batteries. Advanced Energy Materials, Wiley-VCH Verlag, 2017, 〈10.1002/aenm.201701787〉. 〈hal-01665952〉
  • Éric Maire, A. Bouterf, J. Adrien, E. Maire, X. Brajer, et al.. Identification of the crushing behavior of brittle foam: From indentation to oedometric tests. Journal of the Mechanics and Physics of Solids, Elsevier, 2017, 98, pp.181 - 200. 〈10.1016/j.jmps.2016.09.011〉. 〈hal-01665954〉
  • Éric Maire, F. Hannard, S. Castin, E. Maire, R. Mokso, et al.. Ductilization of aluminium alloy 6056 by friction stir processing. Acta Materialia, Elsevier, 2017, 130, pp.121 - 136. 〈10.1016/j.actamat.2017.01.047〉. 〈hal-01665949〉
  • Éric Maire, Pauline Delroisse, Pascal J. Jacques, Eric Maire, Olivier Rigo, et al.. Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. Scripta Materialia, Elsevier, 2017, 141, pp.32 - 35. 〈10.1016/j.scriptamat.2017.07.020〉. 〈hal-01665950〉
  • Mathilde Pigneret, Florian Mermillod-Blondin, Laurence Volatier, Caroline Romestaing, Eric Maire, et al.. Urban pollution of sediments: Impact on the physiology and burrowing activity of tubificid worms and consequences on biogeochemical processes. Science of the Total Environment, Elsevier, 2016, 568 ( 196–207), 〈10.1016/j.scitotenv.2016.05.174〉. 〈hal-01334156〉
  • Amine Bouterf, Jérome Adrien, Eric Maire, Xavier Brajer, François Hild, et al.. Failure Mechanisms of Plasterboard in Nail Pull Test Determined by X-ray Microtomography and Digital Volume Correlation. Experimental Mechanics, Society for Experimental Mechanics, 2016, 56, pp.1427 - 1437. 〈10.1007/s11340-016-0168-8〉. 〈hal-01383905〉
  • Mouhcine Kahziz, Thilo F. Morgeneyer, Matthieu Mazière, L. Helfen, Olivier Bouaziz, et al.. In situ 3D synchrotron laminography assessment of ddge fracture in dual-phase steels : quantitative and numerical analysis. Experimental Mechanics, Society for Experimental Mechanics, 2016, 56, pp.177-195. 〈10.1007/s11340-015-0076-3〉. 〈hal-01295524〉
  • Anran Guo, Martina Roso, Michele Modesti, Eric Maire, Jérôme Adrien, et al.. Characterization of porosity, structure, and mechanical properties of electrospun SiOC fiber mats. Journal of Materials Science, Springer Verlag, 2015, 50 (12), pp.4221--4231. 〈hal-01538025〉
  • Rezki Oughanem, Souhail Youssef, Daniela Bauer, Yannick Peysson, Eric Maire. A multi-scale investigation of pore structure impact on the mobilization of trapped oil by surfactant injection.. Transport in Porous Media, Springer Verlag, 2015, 109 (3), pp.673-692. 〈10.1007/s11242-015-0542-5〉. 〈hal-01266644〉
  • Amine Bouterf, Stéphane Roux, François Hild, Guillaume Vivier, Xavier Brajer, et al.. Damage law identification from full field displacement measurement: Application to four-point bending test for plasterboard. European Journal of Mechanics - A/Solids, Elsevier, 2015, 49, pp.60-66. 〈10.1016/j.euromechsol.2014.06.001〉. 〈hal-01068546〉
  • Damien Fabregue, Caroline Landron, Olivier Bouaziz, Eric Maire. Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography. Steel Research International, 2015, 86 (10), pp.1197-1203. 〈10.1002/srin.201500072〉. 〈hal-01514146〉
  • Tudor Balan, Xavier Lemoine, Eric Maire, Anne-Marie Habraken. Implementation of a damage evolution law for dual-phase steels in Gurson-type models. Materials and Design, Elsevier, 2015, 88, pp.1213-1222. 〈10.1016/j.matdes.2015.09.075〉. 〈hal-01273675〉
  • Anne Mertens, Aude Simar, Jérôme Adrien, Eric Maire, H-M Montrieux, et al.. Influence of fibre distribution and grain size on the mechanical behaviour of friction stir processed Mg―C composites. Materials Characterization, Elsevier, 2015, 107, pp.125--133. 〈hal-01538203〉
  • David Rousseau, Thomas Widiez, Sylvaine Tommaso, Hugo Rositi, Jérôme Adrien, et al.. Fast virtual histology using X-ray in-line phase tomography: application to the 3D anatomy of maize developing seeds. Plant Methods, BioMed Central, 2015, 11 (1), pp.55. 〈hal-01538205〉
  • Liza Lecarme, Éric Maire, A Kumar Kc, Christophe De Vleeschouwer, Laurent Jacques, et al.. Heterogenous void growth revealed by in situ 3-D X-ray microtomography using automatic cavity tracking. Acta Materialia, Elsevier, 2014, 63, pp.130--139. 〈hal-01538028〉
  • Trong-Son Cao, Éric Maire, Catherine Verdu, Christian Bobadilla, Patrice Lasne, et al.. Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model. Computational Materials Science, Elsevier, 2014, 84, pp.175 - 187. 〈10.1016/j.commatsci.2013.12.006〉. 〈hal-00944805〉
  • Éric Maire, Jérôme Adrien, Clémence Petit. Structural characterization of solid foams. Comptes Rendus Physique, Elsevier Masson, 2014, 15 (8), pp.674--682. 〈hal-01538209〉
  • Florian Bouville, Eric Maire, Sylvain Deville. Lightweight and stiff cellular ceramic structures by ice templating. Journal of Materials Research, Cambridge University Press (CUP), 2014, 29 (2), pp.175-181. 〈hal-01133210〉
  • Éric Maire, Philip John Withers. Quantitative X-ray tomography. International Materials Reviews, ASM International, 2014, 59 (1), pp.1--43. 〈hal-01538208〉
  • Amine Bouterf, Stéphane Roux, François Hild, Jérôme Adrien, Eric Maire, et al.. Digital volume correlation applied to X-ray tomography images from spherical indentation tests on lightweight gypsum. Strain, Wiley-Blackwell, 2014, 50 (5), pp.444-453. 〈10.1111/str.12101〉. 〈hal-01068402〉
  • Florian Bouville, Etienne Portuguez, Yunfei Chang, Gary L. Messing, Adam J. Stevenson, et al.. Templated Grain Growth in Macroporous Materials. Journal of the American Ceramic Society, Wiley, 2014, 97 (6), pp.1736-1742. 〈hal-01133200〉
  • Florian Bouville, Eric Maire, Sylvain Deville. Self-Assembly of Faceted Particles Triggered by a Moving Ice Front. Langmuir, American Chemical Society, 2014, 30 (29), pp.8656-8663. 〈hal-01133186〉
  • G. Requena, Éric Maire, Claire Leguen, Sandrine Thuillier. Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography. Materials Science and Engineering: A, Elsevier, 2014, 589, pp.242-251. 〈10.1016/j.msea.2013.09.084〉. 〈hal-00985804〉
  • Thilo F. Morgeneyer, Henry Proudhon, Peter Cloetens, Wolfgang Ludwig, Quentin Roirand, et al.. Nanovoid morphology and distribution in deformed HDPE studied by magnified synchrotron radiation holotomography. Polymer, Elsevier, 2014, 55, pp.6439-6443. 〈10.1016/j.polymer.2014.10.022〉. 〈hal-01102339〉
  • Julien Favre, Damien Fabregue, Éric Maire, Akihiko Chiba. Grain growth and static recrystallization kinetics in Co-20Cr-15W-10Ni (L-605) cobalt-base superalloy. Philosophical Magazine, Taylor & Francis, 2014, 94 (18, A), pp.1992-2008. 〈10.1080/14786435.2014.903342〉. 〈hal-01503883〉
  • Florian Bouville, Eric Maire, Sylvain Meille, Bertrand Van de Moortèle, Adam J. Stevenson, et al.. Strong, tough and stiff bioinspired ceramics from brittle constituents. Nature Materials, Nature Publishing Group, 2014, 13, pp.5008-514. 〈10.1038/nmat3915〉. 〈hal-00988803〉
  • Olivier Caty, Philippe Ibarroule, Mathieu Herbreteau, Francis Rebillat, Éric Maire, et al.. Application of X-ray computed micro-tomography to the study of damage and oxidation kinetics of thermostructural composites. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Elsevier, 2014, 324, pp.113--117. 〈hal-01538029〉
  • Rezki Oughanem, Souhail Youssef, Yannick Peysson, Brigitte Bazin, Eric Maire, et al.. Pore-scale to core-scale study of capillary desaturation curves using multi-scale 3D imaging. Int. Sym. of the Society of Core Analysts, 2013. 〈hal-01538217〉
  • Eric Maire, Sylvain Dancette, Antoine Ferré. Caractérisation de l’endommagement dans les matériaux composites amorphe/cristallin frittés au SPS. Poudres et Matériaux Frittés 2013 22 au 24 mai 2013 Belfort, 2013. 〈hal-01558489〉
  • Akihide Hosokawa, David S Wilkinson, Jidong Kang, Eric Maire. Onset of void coalescence in uniaxial tension studied by continuous X-ray tomography. Acta Materialia, Elsevier, 2013, 61 (4), pp.1021--1036. 〈hal-01538035〉
  • S. Deville, J. Adrien, Eric Maire, M. Scheele, M. Di Michiel. Time-lapse, three-dimensional in situ imaging of ice crystal growth in a colloidal silica suspension. Acta Materialia, Elsevier, 2013, 61 (6), pp.2077-2086. 〈10.1016/j.actamat.2012.027〉. 〈hal-00850901〉
  • Laurent Babout, Krzysztof Grudzien, Eric Maire, Philip J Withers. Influence of wall roughness and packing density on stagnant zone formation during funnel flow discharge from a silo: An X-ray imaging study. Chemical Engineering Science, Elsevier, 2013, 97, pp.210--224. 〈hal-01538038〉
  • Yu-Chen Karen Chen-Wiegart, Takeshi Wada, Nikita Butakov, Xianghui Xiao, Francesco De Carlo, et al.. 3D morphological evolution of porous titanium by X-ray micro-and nano-tomography. Journal of Materials Research, Cambridge University Press (CUP), 2013, 28 (17), pp.2444--2452. 〈hal-01538034〉
  • Amine Bouterf, Stéphane Roux, François Hild, Eric Maire, Sylvain Meille, et al.. Identification d'une loi d'endommagement de plâtre à partir de mesures de champs de déplacements. 21ème Congrès Français de Mécanique, 26 au 30 août 2013, Bordeaux, France (FR), 2013. 〈hal-01538039〉
  • Clémence Petit, Sylvain Meille, Eric Maire. Cellular solids studied by x-ray tomography and finite element modeling―a review. Journal of Materials Research, Cambridge University Press (CUP), 2013, 28 (17), pp.2191--2201. 〈hal-01538214〉
  • Éric Maire, Withers Phil. Quantitative tomography. International Materials Reviews, ASM International, 2013, 〈10.1179/1743280413Y.0000000023 〉. 〈hal-01537600〉
  • Benoît Revil-Baudard, Oana Cazacu, Sandrine Thuillier, Éric Maire. Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data. Mechanics Research Communications, Elsevier, 2013, 50, pp.77-82. 〈10.1016/j.mechrescom.2013.04.005〉. 〈hal-00985576〉
  • Paul Leplay, Julien Rethore, Sylvain Meille, Marie-Christine Baietto, Jerome Adrien, et al.. Three-dimensional analysis of an in situ double-torsion test by x-ray computed tomography and digital volume correlation. Experimental Mechanics, Society for Experimental Mechanics, 2013, 50, pp.1265-1275. 〈hal-00938623〉
  • Joseph Fansi, X. Lemoine, Éric Maire, Caroline Landron, Olivier Bouaziz, et al.. Numerical investigation and experimental validation of physically based advanced GTN model for DP steels. Materials Science and Engineering: A, Elsevier, 2013, 569, pp.1-12. 〈10.1016/j.msea.2013.01.019,〉. 〈hal-00790173〉
  • Sandrine Cottrino, Yves Jorand, Eric Maire, Jérôme Adrien. Characterization by X-ray tomography of granulated alumina powder during in situ die compaction. Materials Characterization, Elsevier, 2013, 81, pp.111--123. 〈hal-01538037〉
  • Julien Favre, Damien Fabregue, David Piot, Ning Tang, Yuichiro Koizumi, et al.. Modeling Grain Boundary Motion and Dynamic Recrystallization in Pure Metals. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2013, 44A (Issue : 13), pp.5861-5875. 〈10.1007/s11661-013-1914-5〉. 〈emse-00967248〉
  • Julien Favre, Yuichiro Koizumi, Akihiko Chiba, Damien Fabregue, Eric Maire. Deformation Behavior and Dynamic Recrystallization of Biomedical Co-Cr-W-Ni (L-605) Alloy. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2013, 44A (6), pp.2819-2830. 〈10.1007/s11661-012-1602-x〉. 〈hal-01500813〉
  • Jean-Yves Buffière, Eric Maire, Nicolas Vanderesse. 3 D Characterization and Modeling of the Influence of Porosity on Fatigue Properties of a Cast Al Alloy. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Jul, 2012. 〈hal-01538047〉
  • Eric Maire. X-ray tomography applied to the characterization of highly porous materials. Annual Review of Materials Research, 2012, 42, pp.163--178. 〈hal-01538223〉
  • Audrey Lasalle, Christian Guizard, Eric Maire, Jérôme Adrien, Sylvain Deville. Particle redistribution and structural defect development during ice templating. Acta Biomaterialia, Elsevier, 2012, 60 (11), pp.4594-4603. 〈10.1016/j.actamat.2012.02.023〉. 〈hal-01133901〉
  • Audrey Lasalle, Christian Guizard, Eric Maire, Jérôme Adrien, Sylvain Deville. Particle redistribution and structural defect development during ice templating. Acta Materialia, Elsevier, 2012, 60 (11), pp.4594-4603. 〈hal-00728196〉
  • Akihide Hosokawa, David S Wilkinson, Jidong Kang, Eric Maire. Effect of triaxiality on void growth and coalescence in model materials investigated by X-ray tomography. Acta Materialia, Elsevier, 2012, 60 (6), pp.2829--2839. 〈hal-01538041〉
  • Lingfei Zhang, José Mf Ferreira, Susana Olhero, Loïc Courtois, Tao Zhang, et al.. Modeling the mechanical properties of optimally processed cordierite―mullite―alumina ceramic foams by X-ray computed tomography and finite element analysis. Acta Materialia, Elsevier, 2012, 60 (10), pp.4235--4246. 〈hal-01538225〉
  • Éric Maire, Thilo F. Morgeneyer, Caroline Landron, Jérôme Adrien, Lukas Helfen. Bulk evaluation of ductile damage development using high resolution tomography and laminography. Comptes Rendus Physique, Elsevier Masson, 2012, 13, pp.328-336. 〈10.1016/j.crhy.2011.12.009〉. 〈hal-00685034〉
  • Michel Suéry, Sofiane Terzi, Bastien Mireux, Luc Salvo, Jérôme Adrien, et al.. Fast in situ X-Ray microtomography observations of solidification and semisolid deformation of Al-Cu alloys. JOM, 2012, 64 (1), pp.83--88. 〈hal-01538220〉
  • Caroline Landron, Eric Maire, J. Adrien, Heikki Suhonen, Peter Cloetens, et al.. Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography. Scripta Materialia, Elsevier, 2012, 66, pp.1077-1080. 〈10.1016/j.scriptamat.2012.03.003〉. 〈hal-00714419〉
  • Audrey Lasalle, Christian Guizard, Jérôme Leloup, Sylvain Deville, Eric Maire, et al.. Ice-Templating of Alumina Suspensions: Effect of Supercooling and Crystal Growth During the Initial Freezing Regime. Journal of the American Ceramic Society, Wiley, 2012, 95 (2), pp.799-804. 〈10.1111/j.1551-2916.2011.04993.x〉. 〈hal-00661396〉
  • Vincent Fernandez, Eric Buffetaut, Eric Maire, Jérôme Adrien, Varavudh Suteethorn, et al.. Phase contrast synchrotron microtomography: improving noninvasive investigations of fossil embryos in ovo. Microscopy and Microanalysis, Cambridge University Press (CUP), 2012, 18 (01), pp.179--185. 〈hal-01538042〉
  • Sandrine Thuillier, Eric Maire, Michel Brunet. Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling. Materials Science and Engineering: A, Elsevier, 2012, 558, pp.217-225. 〈10.1016/j.msea.2012.07.116〉. 〈hal-00987155〉
  • Lucien Laiarinandrasana, Thilo F. Morgeneyer, Henry Proudhon, Franck N'Guyen, Éric Maire. Effect of multiaxial stress state on morphology and spatial distribution of voids in deformed semicrystalline polymer assessed by x-ray tomography. Macromolecules, American Chemical Society, 2012, 45, pp.4658-4668. 〈10.1021/ma3005247〉. 〈hal-00725911〉
  • Krzysztof Grudzien, Maciej Niedostatkiewicz, Jérôme Adrien, Eric Maire, Laurent Babout. Analysis of the bulk solid flow during gravitational silo emptying using X-ray and ECT tomography. Powder Technology, Elsevier, 2012, 224, pp.196--208. 〈hal-01538044〉
  • Nicolas Vanderesse, Jean-Yves Buffière, Eric Maire, Amaury Chabod. Effect of Porosity on the Fatigue Life of a Cast Al Alloy. Optical Measurements, Modeling, and Metrology, Volume 5, 2011, pp.55--61. 〈hal-01538232〉
  • Olivier Caty, Jean-Yves Buffière, Eric Maire, Jérôme Adrien. 3D characterization of the influence of porosity on fatigue properties of a cast Al alloy. Advanced Engineering Materials, Wiley-VCH Verlag, 2011, 13 (3), pp.194--198. 〈hal-01538053〉
  • Eric Maire, Suxia Zhou, Jérôme Adrien, Marco Dimichiel. Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography. Engineering Fracture Mechanics, Elsevier, 2011, 78 (15), pp.2679--2690. 〈hal-01538237〉
  • François Hild, Alain Fanget, Jérôme Adrien, Eric Maire, Stéphane Roux. Three-dimensional analysis of a tensile test on a propellant with digital volume correlation. Archives of Mechanics, 2011, 63 (5-6), pp.1-20. 〈hal-00634714〉
  • Shingo Kurosu, Hiroaki Matsumoto, Akihiko Chiba, Caroline Landron, Damien Fabrègue, et al.. The damage process in a biomedical Co―29Cr―6Mo―0.14 N alloy analyzed by X-ray tomography and electron backscattered diffraction. Scripta Materialia, Elsevier, 2011, 64 (5), pp.367--370. 〈hal-01538056〉
  • Hiroaki Matsumoto, Hiroshi Yoneda, Damien Fabrègue, Eric Maire, Akihiko Chiba, et al.. Mechanical behaviors of Ti―V―(Al, Sn) alloys with α′ martensite microstructure. Journal of Alloys and Compounds, Elsevier, 2011, 509 (6), pp.2684--2692. 〈hal-01538228〉
  • Hiroaki Matsumoto, Hiroshi Yoneda, Kazuhisa Sato, Shingo Kurosu, Eric Maire, et al.. Room-temperature ductility of Ti―6Al―4V alloy with α′ martensite microstructure. Materials Science and Engineering: A, Elsevier, 2011, 528 (3), pp.1512--1520. 〈hal-01538227〉
  • Nihan Tuncer, Gursoy Arslan, Eric Maire, Luc Salvo. Influence of cell aspect ratio on architecture and compressive strength of titanium foams. Materials Science and Engineering: A, Elsevier, 2011, 528 (24), pp.7368-7374. 〈10.1016/j.msea.2011.06.028〉. 〈hal-00632698〉
  • Nicolas Moulin, Estelle Parra-Denis, Dominique Jeulin, Christophe Ducottet, Annabelle Bigot, et al.. Constituent particle break-up during hot rolling of AA 5182. Advanced Engineering Materials, Wiley-VCH Verlag, 2010, 12 (1-2), pp.20-29. 〈10.1002/adem.200900241〉. 〈hal-00681824〉
  • Emmanuelle Vidal-Sallé, Pierre Badel, Nahiene Hamila, Eric Maire, Philippe Boisse. From macro to meso-scale modelling of forming textile reinforcements. World Journal of Engineering, 2010, 7 (1), pp.42-52. 〈hal-00850045〉
  • Emmanuelle Vidal-Sallé, Pierre Badel, Eric Maire, Philippe Boisse. Meso-scale modelling of forming textile reinforcements. World Journal of Engineering, 2010, 7 (1), pp.34-41. 〈hal-00850046〉
  • K Grudzień, Eric Maire, Jérôme Adrien, Dominik Sankowski. Analysis of funnel flow in rectangular silo based on ECT data. Automatyka/Akademia Górniczo-Hutnicza im. Stanislawa Staszica w Krakowie, 2010, 14, pp.681--694. 〈hal-01538059〉
  • Michel Suéry, Jérôme Adrien, Caroline Landron, Sofiane Terzi, Eric Maire, et al.. Fast in-situ x-ray micro tomography characterisation of microstructural evolution and strain-induced damage in alloys at various temperatures: Dedicated to professor dr. h.-p. degischer on the occasion of his 65th birthday. International Journal of Materials Research, 2010, 101 (9), pp.1080--1088. 〈hal-01538239〉
  • C. Landron, Olivier Bouaziz, Eric Maire, Jérôme Adrien. Characterization and modeling of void nucleation by interface decohesion in dual phase steels. Scripta Materialia, Elsevier, 2010, 63, pp.973-976. 〈10.1016/j.scriptamat.2010.07.021〉. 〈hal-00523143〉
  • François Hild, Eric Maire, Stéphane Roux, Jean-François Witz. Three dimensional analysis of a compression test on stone wool. Acta Materialia, Elsevier, 2009, 57, pp.3310-3320. 〈hal-00371354〉
  • Ana Morales Rodriguez, Pascal Reynaud, Gilbert Fantozzi, Jérôme Adrien, Eric Maire. Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography. Scripta Materialia, Elsevier, 2009, pp.388-390. 〈hal-00431386〉
  • Sylvain Deville, Eric Maire, Audrey Lasalle, Agnès Bogner, Catherine Gauthier, et al.. In situ X-ray radiography and tomography observations of the solidification of aqueous alumina particle suspensions. Part II: Steady state. Journal of the American Ceramic Society, Wiley, 2009, 92 (11), pp.2497-2503. 〈hal-00903929〉
  • Sylvain Deville, Eric Maire, Audrey Lasalle, Agnès Bogner, Catherine Gauthier, et al.. In situ X-ray radiography and tomography observations of the solidification of aqueous alumina particle suspensions. Part I: Initial instants. Journal of the American Ceramic Society, Wiley, 2009, 92 (11), pp.2489-2496. 〈hal-00903925〉
  • Olivier Caty, Eric Maire, A. Douillard, P. Bertino, R. Dejaeger, et al.. Experimental determination of the macroscopic fatigue properties of metal hollow sphere structures. Materials Letters, Elsevier, 2009, pp.1131-1134. 〈hal-00431375〉
  • M. Loretz, Eric Maire, D. Baillis. Analytical modelling of the radiative properties of metallic foams: Contribution of X-ray tomography. Advanced Engineering Materials, Wiley-VCH Verlag, 2008, pp.352-360. 〈hal-00434026〉
  • Olivier Caty, Eric Maire, Régis Bouchet. Fatigue of metal hollow spheres structures. Advanced Engineering Materials, Wiley-VCH Verlag, 2008, pp.179-184. 〈hal-00434025〉
  • A. Weck, D.S. Wilkinson, Eric Maire. Visualization by x-ray tomography of void growth and coalescence leading to fracture in model materials. Acta Materialia, Elsevier, 2008, pp.2919-2928. 〈hal-00433967〉
  • Eric Maire, O. Bouaziz, M. Di Michiel, Catherine Verdu. Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Materialia, Elsevier, 2008, pp.4954-4964. 〈hal-00433954〉
  • P. Badel, E. Vidal-Salle, Eric Maire, P. Boisse. Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. Composites Science and Technology, Elsevier, 2008, pp.2433-2440. 〈hal-00433970〉
  • Pierre Badel, Emmanuelle Vidal-Salle, Eric Maire, Philippe Boisse. Simulation and tomography analyzis of textile composite reinforcement deformation at the mesoscopic scale. Composites Science and Technology, Elsevier, 2008, 68, pp.2433-2440. 〈hal-00381447〉
  • Pierre-Olivier Bouchard, L. Bourgeon, H. Lachapèle, Eric Maire, Catherine Verdu, et al.. On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels. Materials Science & Engineering, AStructural Materials: Properties, Microstructure and Processing, 2008, pp.223-233. 〈hal-00433956〉
  • O. Bouaziz, Eric Maire, Martial Giton. A model for initiation and growth of damage in dual-phase steels identified by X-ray micro-tomography. Revue de Métallurgie, 2008, pp.102-107. 〈hal-00433959〉
  • A. Weck, D.S. Wilkinson, Eric Maire. Observation of void nucleation growth and coalescence in a model metal matrix composite using x-ray tomography. Materials Science and Engineering, Elsevier, 2008, pp.435-445. 〈hal-00433966〉
  • O Bouaziz, Éric Maire, Martial Giton, J Lamarre, Y Salingue, et al.. A model for initiation and growth of damage in dualphase steels identified by X-ray micro-tomography. Revue de Métallurgie, 2008, 105 (2), pp.102--107. 〈hal-01538069〉
  • Nicolas Vanderesse, Éric Maire, Michel Darrieulat, Frank Montheillet, Maxime Moreaud, et al.. Three-dimensional microtomographic study of Widmanstätten microstructures in an alpha/beta titanium alloy. Scripta Materialia, Elsevier, 2008, 58 (6), pp.512-515. 〈10.1016/j.scriptamat.2007.11.005〉. 〈hal-00261263〉
  • Jean-Yves Buffiere, P. Cloetens, W. Ludwig, Eric Maire, L. Salvo. In situ X-ray tomography studies of microstructural evolution combined with 3D modeling. MRS Bulletin, Cambridge University Press (CUP), 2008, pp.611-619. 〈hal-00433981〉
  • M. Loretz, R. Coquard, D. Baillis, Eric Maire. Metallic foams: Radiative properties/comparison between different models. Journal of Quantitative Spectroscopy and Radiative Transfer, Elsevier, 2008, pp.16-27. 〈hal-00434002〉
  • Pierre-Olivier Bouchard, Ludovic Bourgeon, H. Lachapèle, Éric Maire, Catherine Verdu, et al.. On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels. Materials Science and Engineering: A, Elsevier, 2008, 496 (1-2), pp.Pages 223-233. 〈10.1016/j.msea.2008.05.033〉. 〈hal-00521992〉
  • A.B. Phillion, P.D. Lee, Eric Maire, S.L. Cockcroft. Quantitative assessment of deformation-induced damage in a Semisolid aluminum alloy via X-ray microtomography. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2008, pp.2459-2469. 〈hal-00433955〉
  • Vincent Carmona, Joël Courbon, Eric Maire. Tomographie X et émission acoustique appliquées à la traction de composites à matrice métallique. 18ème Congrès Français de Mécanique (Grenoble 2007), 2007. 〈hal-01538070〉
  • Jérôme Adrien, Eric Maire, Nelly Gimenez, Valérie Sauvant-Moynot. Experimental study of the compression behaviour of syntactic foams by in situ X-ray tomography. Acta Materialia, Elsevier, 2007, pp.1667-1679. 〈hal-00434200〉
  • Eric Maire, Vincent Carmona, Joël Courbon, Wolfgang Ludwig. Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests. Acta Materialia, Elsevier, 2007, pp.6806-6815. 〈hal-00434199〉
  • Eric Maire, Vincent Carmona, W. Ludwig, M. Di Michiel. Fast tomography during continuous tensile tests. Materia Japan, 2007, pp.822. 〈hal-00434148〉
  • M. Kobayashi, H. Toda, Y. Kawai, T. Kobayashi, K. Uesugi, et al.. Measurement of 3-D strain distribution by means of high-resolution X-ray CT image and tracking of microstructural features. Journal of the Japan Institute of Metals Nippon Kinzoku Gakkaishi, 2007, pp.181-186. 〈hal-00434196〉
  • R. Mokso, P. Cloetens, Eric Maire, Jean-Yves Buffiere, Wolfgang Ludwig. Nanoscale zoom tomography with hard x rays using Kirkpatrick-Baez optics. Applied Physics Letters, American Institute of Physics, 2007, pp.1. 〈hal-00434198〉
  • Eric Maire, P. Colombo, Jérôme Adrien, Laurent Babout, L. Biasetto. Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography. Journal of the European Ceramic Society, Elsevier, 2007, pp.1973-1981. 〈hal-00434154〉
  • Eric Maire, Nelly Gimenez, Valérie Sauvant-Moynot, Henri Sautereau. X-ray tomography and three-dimensional image analysis of epoxy-glass syntactic foams. Philosophical Transactions: Mathematical, Physical and Engineering Sciences (Series A), 2006, pp.69-88. 〈hal-00436211〉
  • A. Weck, D.S. Wilkinson, H. Toda, Eric Maire. 2D and 3D visualization of ductile fracture. Advanced Engineering Materials, Wiley-VCH Verlag, 2006, pp.469-472. 〈hal-00436182〉
  • D.R.-B. Aroush, Eric Maire, Catherine Gauthier, Souhail Youssef, P. Cloetens, et al.. A study of fracture of unidirectional composites using in situ high-resolution synchrotron X-ray microtomography. Composites Science and Technology, Elsevier, 2006, pp.1348-1353. 〈hal-00436178〉
  • J.P. Weiler, J.T. Wood, R.J. Klassen, Eric Maire, Jérôme Adrien, et al.. Tensile fracture characteristics of die cast magnesium alloy AM60B determined from high-resolution X-ray tomography. MAGNESIUM TECHNOLOGY, 2006, pp.405-410. 〈hal-00436210〉
  • O. Orlov, Eric Maire, Jérôme Adrien, Michael J. Worswick, D.J. Lloyd. Application of the three-dimensional damage percolation model and X-ray tomography for damage evolution prediction in aluminum alloys. Materials Science Forum, Trans Tech Publications Inc., 2006, pp.1011-1016. 〈hal-00436187〉
  • J. Baruchel, Jean-Yves Buffiere, P. Cloetens, M. Di Michel, Emilie Ferrie, et al.. Advances in synchrotron radiation microtomography. Scripta Materialia, Elsevier, 2006, pp.41-46. 〈hal-00436214〉
  • Eric Maire, Jean-Christophe Grenier, D. Babot, A. Baldacci, H. Klocker, et al.. Quantitative 3D characterization of intermetallic phases in an Al-Mg industrial alloy by X-ray microtomography. Scripta Materialia, Elsevier, 2006, pp.123-126. 〈hal-00436144〉
  • A. Prasad, H. Henein, Eric Maire, Charles-André Gandin. Understanding the rapid solidification of Al-4.3Cu and Al-17Cu using X-ray tomography. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2006, pp.249-257. 〈hal-00436216〉
  • J.J. Gammage, D.S. Wilkinson, J.D. Embury, Eric Maire. Damage studies in heterogeneous aluminium alloys using X-ray tomography. Phil Mag, 2005, pp.3191-3206. 〈hal-00436876〉
  • J.P. Weiler, J.T. Wood, R.J. Klassen, Eric Maire, G. Wang. Relationship between internal porosity and fracture strength of die-cast Magnesium AM60B alloy. Materials Science & Engineering, AStructural Materials: Properties, Microstructure and Processing, 2005, pp.315-322. 〈hal-00436852〉
  • Souhail Youssef, Eric Maire, Roger Gaertner. Finite element modelling of the actual structure of cellular materials determined by X-ray tomography. Acta Materialia, Elsevier, 2005, pp.719-730. 〈hal-00436799〉
  • Eric Maire, Cyril Bordreuil, Laurent Babout, J.C. Boyer. Damage initiation and growth in metals. Comparison between modelling and tomography experiments. Journal of the Mechanics and Physics of Solids, Elsevier, 2005, pp.2411-2434. 〈hal-00436860〉
  • Jean-Yves Buffiere, Henry Proudhon, Emilie Ferrie, W. Ludwig, Eric Maire, et al.. Three dimensional imaging of damage in structural materials using high resolution micro-tomography. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Elsevier, 2005, pp.75-82. 〈hal-00436877〉
  • Eric Maire. Damage in the bulk of metal matrix composites during a monotonic loading. Revue de Métallurgie, 2004, pp.637-649. 〈hal-00474478〉
  • Cs. Kadar, Eric Maire, A. Borbely, G. Peix, J. Lendvai, et al.. X-ray tomography and finite element simulation of the indentation behavior of metal foams. Materials Science & Engineering, AStructural Materials: Properties, Microstructure and Processing, 2004, pp.321-325. 〈hal-00474950〉
  • Eric Maire, Luc Salvo, Peter Cloetens, Marco Di Michiel. Tomographie à rayons X appliquée à l'étude des matériaux. Techniques de l'ingénieur. Matériaux métalliques, 2004. 〈hal-01538264〉
  • H. Toda, Ian Sinclair, Jean-Yves Buffiere, Eric Maire, K.H. Khor, et al.. A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography. Acta Materialia, Elsevier, 2004, pp.1305-1317. 〈hal-00474485〉
  • L. Salvo, P. Belestin, Eric Maire, Marie Jacquesson, C. Vecchionacci, et al.. Structure and mechanical properties of AFS sandwiches studied by in-situ compression tests in X-ray microtomography. Advanced Engineering Materials, Wiley-VCH Verlag, 2004, pp.411-415. 〈hal-00474951〉
  • Ian Sinclair, M. Preuss, Eric Maire, Jean-Yves Buffiere, P. Bowen, et al.. The effect of fibre fractures in the bridging zone of fatigue cracked Ti–6Al–4V SiC fibre composites. Acta Materialia, Elsevier, 2004, pp.1423-1438. 〈hal-00474483〉
  • Laurent Babout, Eric Maire, Roger Fougeres. Damage initiation in model metallic materials: X-ray tomography and modelling. Acta Materialia, Elsevier, 2004, pp.2475-2487. 〈hal-00474482〉
  • Jérôme Adrien, Eric Maire, Rafael Estevez, Jean-Christophe Ehrstrom, T. Warner. Influence of the thermomechanical treatment on the microplastic behaviour of a wrought Al–Zn–Mg–Cu alloy. Acta Materialia, Elsevier, 2004, pp.1653-1661. 〈hal-00474484〉
  • Laurent Babout, Yves Brechet, Eric Maire, Roger Fougeres. On the competition between particle fracture and particle decohesion in metal matrix composites. Acta Materialia, Elsevier, 2004, pp.4517-4525. 〈hal-00474481〉
  • Arvind Prasad, Hani Henein, Eric Maire, Charles-André Gandin. X-ray tomography study of atomized al-cu droplets . Canadian Metallurgical Quarterly, Canadian Institute of Mining, Metallurgy and Petroleum, 2004, 43 (2), pp.273 - 282. 〈10.1179/cmq.2004.43.2.273〉. 〈hal-01538267〉
  • Eric Maire, Jean-Christophe Grenier, Patrick Franciosi, Alain Vincent, D. Daniel. Experimental characterization of damage during cold forming of aluminium sheets by means of high resolution Xrays tomography. Aluminium Int. J., 2004, pp.696-701. 〈hal-00474934〉
  • Patrick Franciosi, Jean-Christophe Grenier, Eric Maire, D. Daniel, Alain Vincent. Modelling particle-induced damage during forming of aluminium alloys. Aluminium Int. J., 2004, pp.724-728. 〈hal-00474961〉
  • Michel Bornert, Jean-Marc Chaix, Pascal Doumalin, Jean-Christophe Dupré, Thierry Fournel, et al.. Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'analyse des matériaux et des structures. Instrumentation, Mesure, Métrologie, Lavoisier, 2004, 4 (3-4), pp.43-88. 〈hal-00156072〉
  • H Toda, Ian Sinclair, J-Y Buffière, Eric Maire, T Connolley, et al.. Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography. Philosophical Magazine, Taylor & Francis: STM, Behavioural Science and Public Health Titles, 2003, 83 (21), pp.2429--2448. 〈hal-01538270〉
  • Eric Maire, Arnaud Fazekas, L. Salvo, Rémi Dendievel, Souhail Youssef, et al.. X-ray Tomography applied to the characterization of cellular materials. Related Finite Element modeling problems. Composites Science and Technology, Elsevier, 2003, pp.2431-2443. 〈hal-00475150〉
  • L. Salvo, P. Cloetens, Eric Maire, S. Zabler, J.J. Blandin, et al.. X-ray micro-tomography an attractive characterisation technique in materials science. Nuclear Instrumentation and Methods in Physics Research B, 2003, pp.273-286. 〈hal-00475146〉
  • H. Toda, Ian Sinclair, Jean-Yves Buffiere, Eric Maire, B.J. Connolly, et al.. Assessment of fatigue crack closure phenomenon in damage tolerant aluminium alloy by in situ high-rsolution synchrotron x-ray microtomography. Phil Mag, 2003, pp.2429-2448. 〈hal-00475153〉
  • G. Geandier, A. Hazotte, S. Denis, A. Mocellin, Eric Maire. Microstructural analysis of alumina chromium composite by X-Ray tomography and 3-D finite element simulation of thermal stresses. Scripta Materialia, Elsevier, 2003, pp.1219-1224. 〈hal-00475087〉
  • Eric Maire, A. Elmoutaouakkail, Arnaud Fazekas, L. Salvo. In situ measurements of deformation and failure of metallic foams using X ray tomography. MRS Bulletin, Cambridge University Press (CUP), 2003, pp.284. 〈hal-00475149〉
  • Sa Mcdonald, M. Preuss, Eric Maire, Jean-Yves Buffiere, Pm Mummery, et al.. X-ray microtomography imaging of Ti-SiC composites. Journal of Microscopy, Wiley, 2003, pp.112. 〈hal-00475151〉
  • A. Elmoutaouakkail, L. Salvo, Eric Maire, G. Peix. 2D and 3D characterisation of metal foams using X-Ray tomography.. Advanced Engineering Materials, Wiley-VCH Verlag, 2002, pp.803-807. 〈hal-00475500〉
  • M. Preuss, P.J. Withers, Eric Maire, Jean-Yves Buffiere. SiC single fibre full-fragmentation during straining in a Ti-6Al-4V matrix studied by synchrotron X-rays.. Acta Materialia, Elsevier, 2002, pp.3175-3190. 〈hal-00475457〉
  • M. Preuss, G. Rauchs, P.J. Withers, Eric Maire, Jean-Yves Buffiere. Interfacial shear strength of Ti-SiC fibre composites measured by synchrotron strain measurement.. Composites, Elsevier, 2002, pp.1381-1385. 〈hal-00475515〉
  • Eric Maire, Jean-Yves Buffiere, P. Cloetens, W. Ludwig, G. Peix. High resolution x-ray tomography applied to the observation of the micro-structure of materials.. Practical Metallography, 2002, pp.155-168. 〈hal-00475512〉
  • J.B. Wishkel, K. Navel, H. Henein, Eric Maire. Solidification study of aluminium alloys using impulse Atomization : Solidification study of aluminium alloys using impulse Atomization : Part 2 : Effect of cooling rate on microstructure. Canadian Metallurgical Quaterly, 2002, pp.193-204. 〈hal-00475454〉
  • Eric Maire, Jean-Marc Chaix, N. Glandut, L. Salvo, Laurent Babout. Al-ZrO 2 model composites elaboration by powder metallurgy. Revue de Métallurgie, 2002, pp.1043-1049. 〈hal-00475469〉
  • J.B. Wishkel, H. Henein, Eric Maire. Solidification study of aluminium alloys using impulse Atomization :Part 1,Heta transfert analysis of an Atomized droplet. Canadian Metallurgical Quaterly, 2002, pp.97-110. 〈hal-00475456〉
  • Laurent Babout, Eric Maire, Jean-Yves Buffiere, Roger Fougeres. Characterization by x-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites. Acta Materialia, Elsevier, 2001, pp.2055-2063. 〈hal-00475312〉
  • Eric Maire, Jean-Yves Buffiere, L. Salvo, J.J. Blandin, W. Ludwig, et al.. On the application of x-ray microtomography in the field of materials science. Advanced Engineering Materials, Wiley-VCH Verlag, 2001, pp.539-546. 〈hal-00475297〉
  • Eric Maire, A. Owen, Jean-Yves Buffiere, P.J. Withers. A synchrotron x-ray study of a Ti-Si Cf composite during in situ straining. Acta Materialia, Elsevier, 2001, pp.153-163. 〈hal-00475288〉
  • Eric Maire, A Owen, J-Y Buffière, Pj Withers. A synchrotron X-ray study of a Ti/SiC f composite during in situ straining. Acta Materialia, Elsevier, 2001, 49 (1), pp.153--163. 〈hal-01538279〉
  • S. Kustov, S. Golyandin, K. Sapozhnikov, Alain Vincent, Eric Maire, et al.. Structural and transient internal friction due to thermal expansion mismatch between matrix and reinforcement in Al-Sic particulate composite. Materials Science and Engineering, Elsevier, 2001, pp.218-226. 〈hal-00475293〉
  • Jean-Yves Buffiere, Stéphane Savelli, Pierre-Henri Jouneau, Eric Maire, Roger Fougeres. Experimental study of porosity and its relation to fatigue mechanisms of a model Al-Si7-Mg0.3 cast Al alloy. Materials Science and Engineering, Elsevier, 2001, pp.115-126. 〈hal-00475354〉
  • Jean-Yves Buffiere, Stéphane Savelli, Pierre-Henri Jouneau, Eric Maire, Roger Fougeres. Experimental study of porosity and its relation to fatigue mechanisms of model Al―Si7―Mg0. 3 cast Al alloys. Materials Science and Engineering: A, Elsevier, 2001, 316 (1), pp.115--126. 〈hal-01538077〉
  • Jean-Yves Buffiere, Eric Maire, Robert Künzi, Gilles Peix, Peter Cloetens. Damage Evolution inside a Notched Sample of Metal Matrix Composite Studied by Synchrotron X-Ray Micro-Tomography. Microstructural Investigation and Analysis, Volume 4, 2000, pp.156--161. 〈hal-01538080〉
  • Eric Maire, Etienne Lelièvre, Daniel Brau, Andrew Lyons, Michael Woodward, et al.. Development of an ultralow-light-level luminescence image analysis system for dynamic measurements of transcriptional activity in living and migrating cells. Analytical Biochemistry, Elsevier Masson, 2000, 280 (1), pp.118--127. 〈hal-01538280〉
  • Jean-Yves Buffiere, Eric Maire, Gilles Peix, Jose Baruchel. Development of a non destructive characterisation technique for the 3D investigation of micro-heterogeneous structural materials. Matériaux & Techniques, EDP Sciences, 2000, 88 (9-10), pp.15--18. 〈hal-01538078〉
  • Peter Cloetens, Wolfgang Ludwig, Jose Baruchel, Jean-Pierre Guigay, Petra Pernot-Rejmánková, et al.. Hard x-ray phase imaging using simple propagation of a coherent synchrotron radiation beam. Journal of Physics D: Applied Physics, IOP Publishing, 1999, 32 (10A), pp.A145. 〈hal-01538083〉
  • Eric Maire, Catherine Verdu, Gérard Lormand, Roger Fougeres. Study of the damage mechanisms in an OSPREY™ Al alloy-SiCp composite by scanning electron microscope in situ tensile tests. Materials Science and Engineering: A, Elsevier, 1995, 196 (1-2), pp.135--144. 〈hal-01538293〉

Communication dans un congrès49 documents

  • Florent Hannard, Sidey Castin, Eric Maire, Rajmund Mokso, Thomas Pardoen, et al.. Effect of friction stir processing on the damage resistance of 6xxx series aluminium alloys. TMS 2017, 2017, Unknown, Unknown or Invalid Region. 2017. 〈hal-01538011〉
  • Pauline Delroisse, Nicolas Bruzy, Olivier Rigo, Sébastien Michotte, Eric Maire, et al.. Impact behavior of lattice structures produced by selective laser melting. TMS 2017, 2017, Unknown, Unknown or Invalid Region. 2017. 〈hal-01538016〉
  • Remi Giraudon, Stéphane Lips, Damien Fabregue, Laurent Gremillard, Eric Maire, et al.. Fabrication and characterization of efficient wicks for LHPs. Joint 18th IHPC and 12th IHPS, 2016, Jeju, Korea, South Korea. 2016. 〈hal-01481271〉
  • Nicolas Besnard, Bernard Lestriez, Aurélien Etiemble, Thierry Douillard, Olivier Dubrunfaut, et al.. Contribution of the dielectric spectroscopy to the multiscale study of the electrode materials. ECS, Sep 2016, Pise, Italy. 〈hal-01412791〉
  • Bernard Lestriez, Aurélien Etiemble, Nicolas Besnard, Pablo Jimenez-Manero, Pierre Tran Van, et al.. Multi-Scale Characterization of Electronic and Ionic Limitations to Power Performance of Composite Electrodes Toward Ultra-High Surface Capacities . IMLB, Jun 2016, Chicago, United States. 2016. 〈hal-01412785〉
  • Justine Papillon, Eric Maire, Olivier Ondel, Damien Fabregue, Michel Perez. Comparison of the Mechanical Properties of Crumpled Foils and Entangled Monofilaments. European Mechanics of Materials Conference (EMMC15), Sep 2016, Brussels, Belgium. 〈http://sites.uclouvain.be/emmc15/〉. 〈hal-01388161〉
  • Naïm Naouar, Emmanuelle Vidal-Sallé, Julien Schneider, Éric Maire, Philippe Boisse. Analysis of Composite Reinforcement at Mesoscopic Scale from X-Ray Microtomography. Key Engineering Materials, 2014, Unknown, Unknown or Invalid Region. 611, pp.316--323, 2014. 〈hal-01538207〉
  • Souhail Youssef, Elisabeth Rosenberg, Herve Deschamps, Rezki Oughanem, Éric Maire, et al.. Oil ganglia dynamics in natural porous media during surfactant flooding captured by ultra-fast x-ray microtomography. Proceedings of the Symposium of the Society of Core Analysts, Montpellier, France, 2014, Unknown, Unknown or Invalid Region. pp.11--18, 2014. 〈hal-01538211〉
  • Anouk Perret, Geneviève Foray, Lucian Roiban, Karine Masenelli-Varlot, Éric Maire, et al.. 3D Multiscale Characterization of Silica Aerogels Composites. Proceedings of the 2nd International Congress on 3D Materials Science, 2014, Unknown, Unknown or Invalid Region. pp.29--34, 2014. 〈hal-01538212〉
  • Souhail Youssef, Herve Deschamps, Jérémie Dautriat, Elisabeth Rosenberg, Rezki Oughanem, et al.. 4D imaging of fluid flow dynamics in natural porous media with ultra-fast X-ray microtomography. International Symposium of the SCA, Napa Valley, California, 2013, Unknown, Unknown or Invalid Region. 176, 2013. 〈hal-01538218〉
  • Mouhcine Kahziz, Thilo F. Morgeneyer, Matthieu Mazière, Lukas Helfen, Éric Maire, et al.. 3D synchrotron laminography assessment of damage evolution in blanked dual phase steels. 13th international conference on fracture, Jun 2013, Beijing, China. 8 p., 2013. 〈hal-00853561〉
  • Julien Troufflard, Guillermo Requena, Sandrine Thuillier, Eric Maire. Ductile Damage in Tension and Bending for DP980 Steel Sheets. Key Engineering Materials, 2013, Unknown, Unknown or Invalid Region. 554, pp.110--117, 2013. 〈hal-01538213〉
  • Hiroaki Matsumoto, Shingo Kurosu, Akihiko Chiba, Caroline Landron, Damien Fabregue, et al.. Deformation and Fracture Behaviors in a Biomedical Co-29Cr-6Mo-0.14 N Alloy Analyzed by X-Ray Tomography. Orthopaedic Proceedings, 2012, Unknown, Unknown or Invalid Region. 94 (SUPP XXV), pp.144--144, 2012. 〈hal-01538219〉
  • Maria Persson Gulda, Eric Maire, David Weitz, Frans Spaepen. Interactions of Dislocations with Twin Boundaries in Hard-Sphere Colloidal Crystals. APS Meeting Abstracts, 2012, Unknown, Unknown or Invalid Region. 2012. 〈hal-01538224〉
  • Joseph Fansi, Anne-Marie Habraken, Tudor Balan, Xavier Lemoine, Caroline Landron, et al.. Application of an Advanced GTN Model. ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, 2012, Unknown, Unknown or Invalid Region. pp.589--597, 2012. 〈hal-01538046〉
  • Marina Pushkareva, Jérôme Adrien, Eric Maire, Arnaud Weck. Three-dimensional investigation of void growth leading to fracture in commercially pure titanium. Proceedings of the 1st International Conference on 3D Materials Science, 2012, Unknown, Unknown or Invalid Region. pp.61--66, 2012. 〈hal-01538221〉
  • Akihide Hosokawa, David S Wilkinson, Jidong Kang, Eric Maire, Masakazu Kobayashi, et al.. OS05-2-2 Influences of stress triaxiality and work hardening on void growth and coalescence studied by X-ray tomography. Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics, 2011, Unknown, Unknown or Invalid Region. 2011 (10), 2011. 〈hal-01538055〉
  • David S Wilkinson, Akihide Hosokawa, Jidong Kang, Eric Maire, Hiroyuki Toda. OS05-4-1 Application of X-ray tomography to the study of void growth and coalescence during ductile fracture. Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics, 2011, Unknown, Unknown or Invalid Region. 2011 (10), 2011. 〈hal-01538231〉
  • Eric Maire, Jérôme Adrien, Caroline Landron, Marco Dimichiel, Luc Salvo. OS05-2-1 In situ experiments in Synchrotron X ray Tomography. Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics, 2011, Unknown, Unknown or Invalid Region. 2011 (10), 2011. 〈hal-01538233〉
  • Paul Leplay, Julien Réthoré, Sylvain Meille, Marie-Christine Baietto, Jérôme Adrien, et al.. Analyse d'un test in situ de double-torsion par tomographie X et corrélation d'images 3D. 10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB, 2011. 〈hal-00592842〉
  • Jérôme Adrien, Eric Maire, Joël Lachambre, Dominique Choqueuse, Valérie Sauvant-Moynot. OS05-3-3 Experimental study of the hydrostatic compression behaviour of syntactic foams by X-ray microtomography. Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics, 2011, Unknown, Unknown or Invalid Region. 2011 (10), 2011. 〈hal-01538052〉
  • Damien Fabrègue, Bassem Mouawad, Cyril Buttay, Maher Soueidan, Aude Lamontagne, et al.. Elaboration of Architectured Materials by Spark Plasma Sintering. THERMEC, Aug 2011, Québec, Canada. 706 - 709, pp.1885-1892, 2012, 〈10.4028/www.scientific.net/MSF.706-709.1885〉. 〈hal-00687142〉
  • Damien Fabregue, Julien Piallat, Eric Maire, Yves Jorand, Véronique Massardier-Jourdan. Nanograined Size Pure Iron Elaborated by Means of Spark Plasma Sintering. Materials Science Forum, 2010, Unknown, Unknown or Invalid Region. 638, pp.1691--1696, 2010. 〈hal-01538060〉
  • Hiroaki Matsumoto, Hiroshi Yoneda, Kazuhisa Sato, Toyohiko J Konno, Shingo Kurosu, et al.. Microstructure and Mechanical Properties of α’Martensite Type Ti-V-Al Alloy after Cold-or Hot Working Process. Key Engineering Materials, 2010, Unknown, Unknown or Invalid Region. 436, pp.171--177, 2010. 〈hal-01538241〉
  • Adrien Charmetant, Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Sallé, Eric Maire, et al.. Simulation and tomography analysis of textile composite reinforcement deformation ate the mesoscopic scale. TEXCOMP 10, Oct 2010, Lille, France. pp.135-142, 2010. 〈hal-00850082〉
  • A. Charmetant, Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Salle, Éric Maire, et al.. Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. 10th international conference on textile Composite (Texcomp), Oct 2010, Lilles, France. 2010. 〈hal-00635787〉
  • Nihan Tuncer, Eric Maire, Luc Salvo, Gursoy Arslan. Foams & Porous Materials: Investigation of PM Parameters' Effect on Architecture of Titanium Foams Using X-Ray Microtomography. European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings, 2010, Unknown, Unknown or Invalid Region. pp.1, 2010. 〈hal-01538240〉
  • Emmanuelle Vidal-Sallé, Quang Thanh Nguyen, Adrien Charmetant, Joël Bréard, Eric Maire, et al.. Use of numerical simulation of woven reinforcementforming at mesoscale: Influence of transversecompression on the global response. 13th ESAFORM Conference, Apr 2010, Brescia, Italy. 6 p., 2010. 〈hal-00850090〉
  • Emmanuelle Vidal-Salle, Pierre Badel, Eric Maire, Sébastien Gatouillat, Philippe Boisse. Simulation et analyse par tomographie X de la déformation à l'échelle mésoscopique de renforts textiles de composites en cours de mise en forme = Simulation and tomography analyses of textile composite reinforcement deformation during forming. Philippe OLIVIER et Jacques LAMON. JNC 16, Jun 2009, Toulouse, France. AMAC, 8 p., 2009. 〈hal-00391074〉
  • Pierre-Olivier Bouchard, Ludovic Bourgeon, Roland E. Logé, Catherine Verdu, Éric Maire. A multiscale analysis of ductile steel grades damage and fracture mechanisms. International Congress on Fracture. 12th International Conference on Fracture 2009 - ICF-12, Jul 2009, Ottawa, Canada. National Research Council Canada, 9, pp.7166-7173 - ISBN 978-1-6173-227-7, 2010. 〈hal-00763063〉
  • Pierre Badel, Emmanuelle Vidal-Sallé, Eric Maire, Philippe Boisse. Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. 12nd ESAFORM Conference, Apr 2009, Enschede, Netherlands. 6 p., 2009. 〈hal-00850080〉
  • Florian Chalancon, Geneviève Foray, Anne Malchère, Jean-Yves Cavaillé, Eric Maire, et al.. Propriétés mécaniques de plaques en composite cimentaire renforcé par des fibres de verre = Mechanical properties of glass fibre-reinforced cement composite plates. Philippe OLIVIER et Jacques LAMON. JNC 16, Jun 2009, Toulouse, France. AMAC, 10 p., 2009. 〈hal-00389320〉
  • Pierre Badel, Eric Maire, Emmanuelle Vidal-Salle, Philippe Boisse. Computational Analyses of Mesocopic Composite Reinforcement Deformation During Preforming. FPCM9, Jul 2008, Canada. 〈hal-00506193〉
  • Pierre Badel, Eric Maire, Emmanuelle Vidal-Salle, Philippe Boisse. Computational determination of the mechanical behavior of textile composite reinforcement. Validation with x-ray tomography. ESAFORM 2008 in International Journal of Material Forming, Apr 2008, France. 〈hal-00506151〉
  • Éric Maire, Andrea Bareggi, Jérôme Adrien, Marco Dimichiel. Damage Assessment of Al Alloys Materials Using in Situ Tensile Tests in X Ray Tomography. Abstract Proceedings of the International Conference on Experimental Mechanics 2008 (ICEM 2008), 2008, Unknown, Unknown or Invalid Region. 2008. 〈hal-01538252〉
  • Suxia Zhou, Éric Maire, Jilong Xie, Andrea Bareggi, Jérôme Adrien, et al.. Damage assessment of Al alloys using in situ tensile tests in x-ray tomography. International Conference on Experimental Mechnics 2008 and Seventh Asian Conference on Experimental Mechanics, 2008, Unknown, Unknown or Invalid Region. pp.73756F--73756F, 2008. 〈hal-01538251〉
  • Jérémie Pourchez, Philippe Grosseau, Emilie Rouèche-Pourchez, Johan Debayle, Jean-Charles Pinoli, et al.. Impact of cellulose ethers on the cement paste microstructure. 10th International Conference and Exhibition of the European Ceramic Society, Jun 2007, Berlin, Germany. Göller Verlag, pp.2045-2050, 2007. 〈hal-00297256〉
  • Jp Weiler, Jt Wood, Rj Klassen, Eric Maire, R Berkmortel, et al.. Porosity, Damage Evolution and Fracture in Die-Cast Magnesium Alloy AM60B. Advanced Materials Research, 2007, Unknown, Unknown or Invalid Region. 15, pp.455--460, 2007. 〈hal-01538253〉
  • Pierre Badel, Eric Maire, Emmanuelle Vidal-Salle, Philippe Boisse. Mesoscopic mechanical analyses of textile composites. Validation with x-ray tomography. 11th EUROMECH-MECAMAT conference, Mar 2007, Italie. 〈hal-00506150〉
  • Eric Maire, Jean Yves Buffière, R Mokso, P Cloetens, Wolfgang Ludwig. Non Destructive Three Dimensional Imaging of Aluminium Alloys. Materials science forum, 2006, Unknown, Unknown or Invalid Region. 519, pp.1367--1372, 2006. 〈hal-01538254〉
  • Eric Maire, Jc Grenier, L Babout. Damage Investigation in Aluminium Alloys by X Ray Tomography. Materials science forum, 2006, Unknown, Unknown or Invalid Region. 519, pp.821--827, 2006. 〈hal-01538259〉
  • O Orlov, Eric Maire, Jérôme Adrien, Michael J Worswick, David J Lloyd. Application of the Three-Dimensional Damage Percolation Model and X-Ray Tomography for Damage Evolution Prediction in Aluminium Alloys. Materials science forum, 2006, Unknown, Unknown or Invalid Region. 519, pp.1011--1016, 2006. 〈hal-01538255〉
  • A. Marmottant, J.F. Despois, L. Salvo, Eric Maire, Michel Bornert, et al.. In-situ X-ray tomography investigation of replicated aluminium foams : quantitative analysis of localisation using 3D strain mapping. 4th International Conference on Porous Metals and Metal Foaming Technology, Sep 2005, Kyoto, Japan. 〈hal-01585967〉
  • Charlotte Bouchet, Félix Arnoldi, Jacques Besson, Suzanne Degallaix, Valérie Denner, et al.. Benchmark on the determination of the cleavage triggering sites in a RPV steel in the DBT range. International conference of fracture, Mar 2005, Turin, Italy. xx, 6 p., 2005. 〈hal-00157709〉
  • Michel Bornert, Pascal Doumalin, Éric Maire, Hervé Moulinec. Full 3D investigation of the local strain field in particulate metal matrix composites. 12th international conference on experimental mechanics, 2004, Italy. 2004. 〈hal-00114257〉
  • Cyril Bordreuil, Eric Maire, Laurent Babout, Emmanuelle Vidal-Salle, Jean-Claude Boyer. Constitutive modelling of orthotropic damage at finite strains: numerical modelling and experiments. Computational Plasticity VII-Fundamentals and Application, 2003, Unknown, Unknown or Invalid Region. 2003. 〈hal-01538074〉
  • Cyril Bordreuil, Eric Maire, Laurent Babout, Emmanuelle Vidal-Salle, Jean-Claude Boyer. Constitutive modelling of orthotropic damage at finite strains : numerical modelling and experiments. Computational Plasticity VII - Fundamentals and Application, Apr 2003, Espagne. 〈hal-00507856〉
  • Eric Maire, J David Embury, David S Wilkinson. Modelling of damage in particulate metal matrix composites. Key Engineering Materials, 1997, Unknown, Unknown or Invalid Region. 127, pp.1167--1174, 1997. 〈hal-01538288〉
  • Roger Fougeres, Eric Maire, Gérard Lormand, A Vincent. Experimental Evidences of Thermo-Elasto-Plastic Strain Incompatibilities in Microheterogeneous Metal Based Materials. IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials, 1996, Unknown, Unknown or Invalid Region. pp.59--66, 1996. 〈hal-01538091〉

Chapitre d'ouvrage5 documents

  • Eric Maire, Samuel Forest. Calcul de microstructures. dir. J.Y. Buffière, E. Maire. Imagerie 3D en mécanique des matériaux, Lavoisier-Hermès, pp.267-282, 2014, 978-2-7462-4556-3. 〈hal-01053961〉
  • Eric Maire, Jérôme Adrien, François Hild, Stéphane Roux, Jean-François Witz. Digital X-ray tomography Volume Correlation of Rock Wool During Compression. Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4, Springer New York, pp.315--316, 2013. 〈hal-01538215〉
  • Volodymyr Shatokha, Iurii Korobeynikov, Eric Maire. On the application of 3D x-ray microtomography for studies in the field of iron ore sintering technology. Sintering-Methods and Products, InTech, 2012. 〈hal-01538222〉
  • András Borbély, Peter Cloetens, Eric Maire, Guillermo Requena. Submicron tomography using high energy synchrotron radiation. Fabrication and Characterization in the Micro-Nano Range, Springer Berlin Heidelberg, pp.151--170, 2011. 〈hal-01538049〉
  • Pierre Badel, Éric Maire. X-ray tomography analyses of composite fibrous preforms.. Boisse, P. Composite reinforcements for optimum performance ISBN=978-1-84569-965-9, Woodhead Publishing Limited, pp.565-587, 2011. 〈hal-00666895〉