Nombre de documents

26

Émile Roux


Article dans une revue6 documents

  • Amélie Cuynet, Daniel Scida, Émile Roux, Franck Toussaint, Rezak Ayad, et al.. Damage characterisation of flax fibre fabric reinforced epoxy composites during low velocity impacts using high-speed imaging and Stereo Image Correlation. Composite Structures, Elsevier, 2018, 〈10.1016/j.compstruct.2018.05.090〉. 〈hal-01814975〉
  • Emile Roux, Pierre-Olivier Bouchard. On the interest of using full field measurements in ductile damage model calibration. International Journal of Solids and Structures, Elsevier, 2015, 72, pp.50-62. 〈10.1016/j.ijsolstr.2015.07.011〉. 〈hal-01183968〉
  • Emile Roux, Modesar Shakoor, Marc Bernacki, Pierre-Olivier Bouchard. A new finite element approach for modelling ductile damage void nucleation and growth—analysis of loading path effect on damage mechanisms. Modelling and Simulation in Materials Science and Engineering, IOP Publishing, 2014, 22 (7), pp.Article 075001. 〈10.1088/0965-0393/22/7/075001〉. 〈hal-01090403〉
  • Michel Saby, Marc Bernacki, Emile Roux, Pierre-Olivier Bouchard. Three-dimensional analysis of real void closure at the meso-scale during hot metal forming processes. Computational Materials Science, Elsevier, 2013, 77, pp.194-201. 〈10.1016/j.commatsci.2013.05.002〉. 〈hal-00831553〉
  • Emile Roux, Pierre-Olivier Bouchard. Kriging metamodel global optimization of clinching joining processes accounting for ductile damage. Journal of Materials Processing Technology, Elsevier, 2013, 213 (7), pp.1038-1047. 〈10.1016/j.jmatprotec.2013.01.018〉. 〈hal-00805670〉
  • Emile Roux, Marc Bernacki, Pierre-Olivier Bouchard. A level-set and anisotropic adaptive remeshing strategy for the modeling of void growth under large plastic strain. Computational Materials Science, Elsevier, 2013, 68, pp.32-46. 〈10.1016/j.commatsci.2012.10.004〉. 〈hal-00756435〉

Communication dans un congrès17 documents

  • Aurélien Carré, Émile Roux, Laurent Tabourot, Pierre Vacher, Ludovic Charleux. Comparison of samaras movement between free falls and constrained rotation, using high speed imaging and stereocorrelation. 12th European Fluid Mechanics Conference, Sep 2018, Vienna, Austria. 〈hal-01813218〉
  • Florian Huet, Emile Roux, Aurélien Carré. Small nomadic counter-rotating wind turbine : design and experimentation. 7èmes Journées Nationales sur la Récupération et le Stockage d'Energie (JNRSE 2017), May 2017, Lyon, France. 〈hal-01659271〉
  • Amélie Cuynet, Franck Toussaint, Emile Roux, Manuel Lagache, Daniel Scida, et al.. Etude du comportement à l'impact et en post impact d'agro-composites renforcés de fibres de lin. Journées Nationales sur les Composites 2017, Jun 2017, 77455 Champs-sur-Marne, France. 〈hal-01623265〉
  • Emile Roux, Patrice Longère, Thierry Millot. Analyse numérique d'une séquence d'images ultra-rapides: application à la fissuration dynamique de structures impactées. 12e Colloque national en calcul des structures, May 2015, Giens, France. 12e Colloque national en calcul des structures, 2015. 〈hal-01516462〉
  • Modesar Shakoor, Marc Bernacki, Émile Roux, Pierre-Olivier Bouchard. Numerical modelling of the effect of nonproportional loading on ductile fracture at the microscale. 20th European Conference on fracture (ECF20), Jun 2014, Trondheim, Norway. 〈hal-01866405〉
  • Emile Roux, Marc Bernacki, Pierre-Olivier Bouchard. Modélisation des micro mécanismes d'endommagement ductile par une approche couplant fonctions level-set et adaptation anisotrope de maillage. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 〈hal-00861396〉
  • Pierre-Olivier Bouchard, Emile Roux, Marc Bernacki. Finite Element Modeling of Void Nucleation, Growth and Coalescence for Large Plastic Strain and Complex Loading Paths. The Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Jun 2013, Prague, Czech Republic. pp.Page 94, 2013. 〈hal-00845437〉
  • Pierre-Olivier Bouchard, Émile Roux, Marc Bernacki. Influence of loading conditions on ductile damage nucleation, growth and coalescence mechanisms. COMPLAS 2013, Sep 2013, Barcelona, Spain. 〈hal-01866462〉
  • Émile Roux, Pierre-Olivier Bouchard, Marc Bernacki. A new level-set framework for the modelling of nucleation, growth and coalescence of voids at the micro-scale. ECCOMAS 2012, Sep 2012, Vienna, Austria. 〈hal-01866485〉
  • Pierre-Olivier Bouchard, Émile Roux, Marc Bernacki. Analysis of ductile damage mechanisms for different voids/particles configurations and under various loading conditions. ECCOMAS 2012, Sep 2012, Vienna, Austria. 〈hal-01866509〉
  • Pierre-Olivier Bouchard, Michel Saby, Marc Bernacki, Émile Roux. A multiscale analysis of void closure during hot forming processes. Forging Industry Association 2012 (FIA 2012), Sep 2012, Cleveland, United States. 〈hal-01866505〉
  • Pierre-Olivier Bouchard, Emile Roux, Rachid El Khaoulani, Guillaume Lebret, Marc Bernacki. Anisotropic mesh adaptation for ductile damage and fracture modelling. CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failures - Center for Numerical Methods in Engineering., Jun 2011, Barcelona, Spain. 〈hal-00677780〉
  • Pierre-Olivier Bouchard, Jean-Marie Gachet, Emile Roux. Ductile damage parameters identification for cold metal forming applications. Gary Menary Editor. The 14th International Esaform Conference on Material Forming: ESAFORM 2011, Apr 2011, Belfast, United Kingdom. 1353 (1), pp.47-52 - ISBN 978-0-7354-0911-8, 2011, 〈10.1063/1.3589490〉. 〈hal-00590272〉
  • Jean-Loup Chenot, Pierre-Olivier Bouchard, Lionel Fourment, Patrice Lasne, Emile Roux. Optimization of Metal Forming Processes for Improving Final Mechanical Strength. E. Oñate, D.R.J. Owen, D. Peric and B. Suárez Editors. XI International Conference on Computational Plasticity. Fundamentals and Applications - COMPLAS XI, Sep 2011, Barcelona, Spain. International Center for Numerical Methods in Engineering, 14 p., 2011. 〈hal-00675507〉
  • Emile Roux, Marc Bernacki, Pierre-Olivier Bouchard. Numerical modelling of ductile damage voids growth mechanism using a level-set technique and anisotropic mesh adaptation. CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failures - Center for Numerical Methods in Engineering., Jun 2011, Barcelona, Spain. 〈hal-00677783〉
  • Emile Roux, Pierre-Olivier Bouchard. Numerical investigation of ductile damage parameters identification: benefit of local measurements. Alain J. Kassab, Eduardo A. Divo Editors. The 7th International Conference on Inverse Problems in Engineering (ICIPE), May 2011, Orlando, United States. Centecorp Publishing, p. 221-226 - ISBN 978-0615471006, 2011. 〈hal-00676849〉
  • Émile Roux, Pierre-Olivier Bouchard. Ductile Damage Material Parameter Identification: Numerical Investigation. Edited by B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero. Tenth International Conference on Computational Structures Technology, Sep 2010, Valencia, Spain. Civil-Comp Press, Paper 135 - ISBN 978-1-905088-38-6, 2010, Civil-Comp Proceedings. 〈10.4203/ccp.93.135〉. 〈hal-00685303〉

Poster1 document

  • Florian Huet, Emile Roux, Aurélien Carré. Small nomadic counter-rotating wind turbine : design and experimentation. 7èmes Journées Nationales sur la Récupération et le Stockage d'Energie (JNRSE 2017), May 2017, Lyon, France. 〈hal-01659277〉

Chapitre d'ouvrage1 document

  • J.M. Rodriguez-Ibabe, M.C. Revilla, N. Gonzalez, P.M. Lardizabal, D.C.J. Farrugia, et al.. The prediction and avoidance of cracking in long products hot rolling (PACROLP Phase 2). Pacrolp-II, 26321, Publications Office, 2013, 978-92-79-34585-2. 〈10.2777/50283〉. 〈hal-01871081〉

Thèse1 document

  • Émile Roux. Assemblage mécanique : stratégies d'optimisation des procédés et d'identification des comportements mécaniques des matériaux. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. 〈NNT : 2011ENMP0025〉. 〈pastel-00628034〉