Didier Rémond
220
Documents
Publications
|
Time and angle analysis of Instantaneous Angular Speed signal: impact on average velocity and order spectrumsSurveillance, Vibrations, Shock and Noise, Institut Supérieur de l'Aéronautique et de l'Espace [ISAE-SUPAERO], Jul 2023, Toulouse, France
Communication dans un congrès
hal-04165673v1
|
|
Effective Identification of Cyclic Excitation and Resonance in Non-stationary Gearbox Vibration MonitoringSurveillance, Vibrations, Shock and Noise, Institut Supérieur de l'Aéronautique et de l'Espace [ISAE-SUPAERO], Jul 2023, Toulouse, France
Communication dans un congrès
hal-04165641v1
|
|
Impacts de l’hypothèse de vitesse de rotation constante dans l'analyse et la modélisation du comportement de machines tournantes25e Congrès Français de Mécanique, Nantes, 29 août-2 septembre 2022, Aug 2022, Nantes, France
Communication dans un congrès
hal-04280077v1
|
|
Angular modeling of a rotating machine: Application to study the dynamic behavior of an electric powertrain in non-stationary conditionsInternational Conference on Noise and Vibration Engineering (ISMA 2022), KU Leuven, Departement Werktuigkunde, LMSD (Mecha(tro)nic System Dynamics), Sep 2022, Lueven, Belgium
Communication dans un congrès
hal-03943190v1
|
Angular based modeling of a planetary gear set with a tooth crack17th International Conference on Condition Monitoring and Asset Management, CM 2021, Jun 2021, London, United Kingdom
Communication dans un congrès
hal-03660205v1
|
|
|
Analysis of Unbalanced Magnetic Pull in a multi-physic model of induction machine with an eccentric rotor2nd World Congress on Condition Monitoring, Dec 2019, Singapore, Singapore. ⟨10.3850/978-981-11-0744-3⟩
Communication dans un congrès
hal-02977541v1
|
|
Coupled bending torsional vibrations of non-ideal energy source rotors going through critical speedsSurveillance, Vishno and AVE conferences, INSA-Lyon, Université de Lyon, Jul 2019, Lyon, France
Communication dans un congrès
hal-02188558v1
|
|
Experimental identification of the corrective effect of a non-circular pulley : application to timing belt drive dynamicsSurveillance, Vishno and AVE conferences, INSA-Lyon, Université de Lyon, Jul 2019, Lyon, France
Communication dans un congrès
hal-02190161v1
|
|
Vibration Control of Cable-Driven Parallel Robot for 3D PrintingSurveillance, Vishno and AVE conferences, INSA-Lyon, Université de Lyon, Jul 2019, Lyon, France
Communication dans un congrès
hal-02190261v1
|
|
Bond graph/Digraph matching procedure and symbolic determination of state space descriptor systemsICBGM, Jul 2018, Bordeaux, France
Communication dans un congrès
hal-01870111v1
|
|
A novel identification tool for rotors working under non-stationary conditions based on the IAS28th International Conference on Noise and Vibration Engineering, ISMA 2018 and 7th International Conference on Uncertainty in Structural Dynamics, USD 2018, Sep 2018, Louvain, Belgium. pp.2005-2012
Communication dans un congrès
hal-03243279v1
|
|
Definition of Essential Order on Descriptor Systems and its Bond Graph DeterminationICBGM'16, International Conference on Bond Graph Modeling and Simulation, Jul 2016, Montréal, Canada. pp.133-142, ⟨10.22360/SummerSim.2016.ICBGM.015⟩
Communication dans un congrès
hal-01863697v1
|
|
Identification of a time-varying mechanical system using the Akaike information criterion22e Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès
hal-01212368v1
|
Identification of time varying parameters using numerical differentiation by integration.21st International Congress on Sound and Vibration, Jul 2014, Beijing, China. pp.1-8
Communication dans un congrès
hal-01059007v1
|
|
Detection of gearbox rattle noise in run-up conditionsXIX-th symposium VIbrations, SHocks & NOise (VISHNO), Jun 2014, Aix-en-Provence, France. pp.173
Communication dans un congrès
hal-01016741v1
|
|
Effects of Electric Component Dynamics on Energy Management for Various Vehicle ArchitecturesFISITA 2014 World Automotive Congress, Jun 2014, Maastricht, Netherlands. pp.1-10
Communication dans un congrès
hal-01017574v1
|
|
Identification of time varying stiffness using derivative estimator and polynomial basisISMA International conference on Noise and Vibration Engineering, Sep 2014, LEUVEN, Belgium
Communication dans un congrès
hal-01074979v1
|
|
Estimation of the size of a spall defect on a rolling bearing outer ring using Instantaneous Angular Speed measurementsISMA International conference on Noise and Vibration Engineering, KU Leuven, Sep 2014, LEUVEN, Belgium
Communication dans un congrès
hal-01074976v1
|
|
Detection of rattle noise with optical encoders in run-up conditionsISMA 2014, Sep 2014, Belgium. pp.254
Communication dans un congrès
hal-01018905v1
|
|
Non-stationary statistical fault indicators estimation applied on IAS machine surveillanceISMA International conference on Noise and Vibration Engineering, Sep 2014, LEUVEN, Belgium
Communication dans un congrès
hal-01075123v1
|
|
Détection du bruit de grenaille par analyse cyclo-non-stationnaireCFA 2014, Apr 2014, Poitiers, France. pp.1-6
Communication dans un congrès
hal-00995004v1
|
|
Evaluation of energy efficiency of electric vehicle with different actuator architectures16th IEEE ITSC, Oct 2013, The Hague, Netherlands. pp.1680-1685, ⟨10.1109/ITSC.2013.6728471⟩
Communication dans un congrès
hal-00873705v1
|
|
Contribution of Angular Measurements in the Diagnosis of Gear Faults by Artificial Neural NetworksSurveillance 7 International Conference, Oct 2013, CHARTRES, France. pp.1-18
Communication dans un congrès
hal-00905102v1
|
|
Optimzation of commande inputs of delivery vehicle by using a control allocation under nonlinear constraintsTruck & Bus World Forum, Nov 2013, Lyon, France
Communication dans un congrès
hal-00959573v1
|
|
An Analysis of Instantaneous Angular Speed Measurement ErrorsSurveillance 7 International Conference, Oct 2013, CHARTRES, France. pp.1-11
Communication dans un congrès
hal-00905103v1
|
|
Reconstruction of the Instantaneous Angular Speed Variations caused by a spall defect on a rolling bearing outer ring correlated with the length of the defectCondition Monitoring of Machinery in Non-Stationary Operations, May 2013, FERRARA, Italy. pp.335-345
Communication dans un congrès
hal-00905088v1
|
|
Application de l'allocation de contrôle sous contraintes non-linéaires pour optimiser les entrées de commande d'un véhicule industriel21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. pp.1
Communication dans un congrès
hal-00873926v1
|
|
Estimation of structural damping using an expansion in the Chebyshev orthogonal basisMEDYNA 2013: 1st Euro-Mediterranean Conference on Structural Dynamics and Vibroacoustics, Apr 2013, Marrakech, Morocco. pp.1-4
Communication dans un congrès
hal-00828176v1
|
|
Excitation/transfer Separation in Non-stationary ConditionsSurveillance 7 International Conference, Oct 2013, CHARTRES, France. pp.1-10
Communication dans un congrès
hal-00905100v1
|
|
Vibration control of electronic boards using active and semiadaptive modal controlVibrations, Shocks and Noise, Jul 2012, Clamart, France. pp.1-7
Communication dans un congrès
hal-00731801v1
|
|
Analyse cyclo-nonstationnaire des bruits de systèmes à engrenagesJournées Jeunes Chercheurs en vibro-Acoustique et contrôle du Bruit, Nov 2012, LeMans, France
Communication dans un congrès
hal-00941418v1
|
|
Numerical investigations on the magnitude of disturbance that could be detected through IASInternational Conference on Condition Monitoring of Machinery in Non-Stationary Operations, Mar 2012, HAMMAMMET, France. pp.231-238
Communication dans un congrès
hal-00694856v1
|
|
Conditional self-adaptive modal control of discrete structures18th Symposium Vibrations, Shocks and Noise, Jul 2012, Clamart, France. paper N° 34
Communication dans un congrès
hal-00720096v1
|
|
Identification of Time-Varying Parameters Using the Derivative Formulation of Chebyshev Polynomials16th IFAC Symposium on System identification, Jul 2012, Brussels, Belgium. pp.1288-1293
Communication dans un congrès
hal-00720109v1
|
|
Advanced Chebyshev expansion for identification of smart structures16th IFAC Symposium on System identification, Jul 2012, Brussels, Belgium. pp.1049-1053
Communication dans un congrès
hal-00720110v1
|
|
Introduction of Angularly Periodic Disturbances in Dynamic Models of Rotating Systems under Non-Stationary Conditions18th Symposium Vibrations, Shocks and Noise, Jul 2012, Clamart, France. paper N° 24
Communication dans un congrès
hal-00720100v1
|
|
Source identification on a reduction gearbox using acoustical measurements in a non-anechoic environment19th International Congress on Sound and Vibration, Jul 2012, Vilnius, Lithuania. paper N° 445
Communication dans un congrès
hal-00720151v1
|
|
Instantaneous Angular Speed monitoring of a 2MW wind turbine using a parametrization processInternational Conference on Condition Monitoring of Machinery in Non-Stationary Operations, Mar 2012, HAMMAMMET, France. pp.415-423
Communication dans un congrès
hal-00694857v1
|
|
Improved acoustical sources location in gear power transmissions18th Symposium Vibrations, Shocks and Noise, Jul 2012, Clamart, France. paper N° 40
Communication dans un congrès
hal-00720098v1
|
|
Boundary condition identification using spatial discrete differentiation with annihilatorsInter-Noise 2012, Aug 2012, New York, United States. pp.1-6
Communication dans un congrès
hal-00731789v1
|
|
Precision of the IAS monitoring system based on the elapsed time method in the spectral domainISAM 2012, Sep 2012, Belgium. pp.645-659
Communication dans un congrès
hal-00737645v1
|
|
Identification à temps continu sur structure continueCongrès Français de Mécanique, Aug 2011, Besançon, France. pp.466
Communication dans un congrès
hal-00628490v1
|
|
Heavy vehicle reference trajectory generation for rollover prevention : development of the control and comparison with alternative approach16th International Congress SIA Dynamique du Véhicule, Oct 2011, Mulhouse, France. pp.1-7
Communication dans un congrès
hal-00694855v1
|
|
|
Utilisation de Polynômes de Chebychev pour l'Identification à Temps ContinuJIME, Apr 2011, Douai, France. pp.CD
Communication dans un congrès
hal-00619025v1
|
Augmentation de la durée de vie opérationnelle de cartes électroniques embarquéesJournée de Printemps 2011 : Comportement en fatigue sous environnement vibratoire, May 2011, Paris, France. pp.1-8
Communication dans un congrès
hal-00628504v1
|
|
Continuous-time identification in a space frameJournée d'identification Modélisation Expérimentale, Apr 2011, Douai, France. pp.1-6
Communication dans un congrès
hal-00628508v1
|
|
On the use of the Instantaneous Angular Speed measurement in non-stationary mechanism monitoringASME 2011 International Design Engineering Technical Conferences, Aug 2011, Washington, United States. pp.DETC2011/MECH-47470
Communication dans un congrès
hal-00694854v1
|
|
Détection de l'usure des outils de coupe en fraisage par vitesse instantanée28th CMVA seminar, Oct 2010, Québec, Canada. pp.CDRom
Communication dans un congrès
hal-00504795v1
|
|
Modal control using real-time identification for time-varying structures17° Colloque Vibrations Chocs et Bruit, Jun 2010, Ecully, France. pp.CDRom
Communication dans un congrès
hal-00504806v1
|
|
Comparison between angular sampling and angular resampling methods applied on the vibration monitoring of a gear meshing in non stationary conditionsInternational Conference on Noise and Vibration Engineering, Sep 2010, Leuven, Belgium. pp.CDRom
Communication dans un congrès
hal-00504789v1
|
|
Global Chassis Control for active safety of heavy vehiclesWorld Automotive Congress FISITA 2010, May 2010, Budapest, Hungary. pp. F2010-D-057
Communication dans un congrès
hal-00504769v1
|
|
Direct identification of linear systems using wavelet analysis17° Colloque Vibrations Chocs et Bruit, Jun 2010, Ecully, France. pp.CDRom
Communication dans un congrès
hal-00504801v1
|
|
A new method for detecting tool wear and breakage in milling13th International ESAFORM Conference on Material Forming, Apr 2010, Brescia, Italy. pp.CDRom
Communication dans un congrès
hal-00504766v1
|
|
Predictive Driver Interpreter by Using Inverse Model for Heavy Vehicles13th International IEEE Conference on Intelligent Transportation Systems, Sep 2010, Madeyra island, Portugal. pp.CDRom
Communication dans un congrès
hal-00504775v1
|
|
Natural roller bearing fault detection by angular measurement of true instantaneous angular speedInternational Conference on Noise and Vibration Engineering ISMA, Sep 2010, Leuven, Belgium. pp.CDRom
Communication dans un congrès
hal-00504788v1
|
|
A New way of writing motion equation in rotating machines by translation into the angular domain8th IFToMM International Conference on Rotordynamics, KIST, Sep 2010, Séoul, South Korea. pp.CDRom
Communication dans un congrès
hal-00504763v1
|
|
A new technique for cutting characterisation and monitoring in milling17° Colloque Vibrations Chocs et Bruit, Jun 2010, Ecully, France. pp.CDRom
Communication dans un congrès
hal-00504796v1
|
|
An original approach for in situ measurement of cutting force and monitoring in milling2nd International Conference Process Machine Interactions, Jun 2010, Vancouver, Canada. pp.CDRom
Communication dans un congrès
hal-00504765v1
|
|
Contrôle actif modal par éléments piézolélectriques: Cas d'aplication et validations expérimentalesJournée Contrôle passif et actif des structures, Nov 2010, Toulouse, France
Communication dans un congrès
hal-00628511v1
|
|
Experimental determination of gearbox sensibility to rattle noise6th Symposium Automobile and Railroad Comfort - Acoustics, Vibrations & Thermal issues, Oct 2010, Le Mans, France. pp.1-7
Communication dans un congrès
hal-00694865v1
|
|
Predictive driver interpreter by using inverse model for heavy vehicles13th International IEEE Conference on Intelligent Transportation Systems, Sep 2010, Madeira island, Portugal. pp.174 - 179
Communication dans un congrès
hal-00721845v1
|
|
Instantaneous Angular Speed Measurement in Machine Monitoring for Mechatronic1st Congrès International de Mécanique Avancée, May 2010, Annaba, Algeria. pp.CDRom
Communication dans un congrès
hal-00504773v1
|
|
Surveillance de l'usure et de l'endommagement d'outils en usinage grande vitesse à l'aide de la mesure de vitesse instantanée2° congrès international sur l'ingénierie des risques industriels, May 2009, Reims, France. pp.CDRom
Communication dans un congrès
hal-00486224v1
|
|
Le dynamomètre KISTLER au delà des limites officielles : cas d'une utilisation en fraisage à grande vitesse11° Colloque AIP PRIMECA, Apr 2009, LaPlagne, France. pp.1-7
Communication dans un congrès
hal-00694864v1
|
|
Wavelets or Chebyshev polynomials continuous-time identification of mechanical systems15th IFAC symposium on System Identification, Sep 2009, Saint-Malo, France. pp.CDRom
Communication dans un congrès
hal-00504730v1
|
|
Modal Behavior Monitoring of a Discrete Evolutive Structure15th IFAC symposium on System Identification, Jul 2009, Saint-Malo, France. pp.CDRom
Communication dans un congrès
hal-00486226v1
|
|
High frequency caracterisation of milling, 16°Colloque Vibrations Chocs et Bruit, Jun 2008, France
Communication dans un congrès
hal-00506221v1
|
|
Contrôle actif modal de cartes électroniques embarquées Réduction du dommage et augmentation de la durée de vieASTELAB 2008, Sep 2008, France
Communication dans un congrès
hal-00506178v1
|
|
Cahier des charges d'un PLM pour l'enseignementJournées REX-PLM '08, Mar 2008, France
Communication dans un congrès
hal-00506186v1
|
|
Caractérisation à haute fréquence de la coupe en fraisageXVIème colloque VCB (Vibrations, Choc et Bruit), Jun 2008, France
Communication dans un congrès
hal-00506207v1
|
|
Mise au point doutils de caractérisation à haute fréquence de la coupe en fraisage, en vue dapplication à des cas dUGV13ème session MANUFACTURING 21, Apr 2008, France
Communication dans un congrès
hal-00506181v1
|
|
Vibration damage reduction of on-board electronic boards using modal active controlCIMTEC, 3rd Conference Smart materials structures systems, Jun 2008, Italie. pp.1-6
Communication dans un congrès
hal-00506223v1
|
|
Contribution à la caractérisation à haute frequence de la coupe ugv5èmes assises MUGV (Machine et Usinage à Grande Vitesse), Jun 2008, France
Communication dans un congrès
hal-00506208v1
|
|
Robustness improvement of modal active control on on-board electronic boards using inline identification methodCIMTEC, 3rd Conference Smart materials structures systems, Jun 2008, Italie. pp.1-6
Communication dans un congrès
hal-00506222v1
|
|
Detection of Rolling Element Bearing Faults by Analysis of the Motor Current, in proceeding of IMechE9th International Conference on Vibrations in Rotating Machinery, Sep 2008, London, United Kingdom. pp.0
Communication dans un congrès
hal-00553851v1
|
|
De lintérêt de lidentification dans le contrôle actif modal de structures Influence de la variation des paramètres modaux sur les performances et le coût énergétique du contrôleurJournées du GT Identification du GdR MACS, ENSAM, Mar 2008, France
Communication dans un congrès
hal-00506145v1
|
|
Contrôle actif modal de cartes électroniques embarquées Réduction du dommage et augmentation de la durée de vieASTELAB 2008, Sep 2008, France. pp.1-6
Communication dans un congrès
hal-00508241v1
|
|
Detection of rolling element bearing faults by analysis of the motor currentIMechE 9th International Conference on Vibrations in Rotating Machinery, Sep 2008, Royaume-Uni
Communication dans un congrès
hal-00506185v1
|
|
A self deployement hexapod model for a space applicationASME IDETC, Sep 2007, États-Unis
Communication dans un congrès
hal-00506277v1
|
|
A phenomenological direct dynamic model for a space hexapodASME IDETC, Sep 2007, LAS VEGAS, United States. pp.1-7
Communication dans un congrès
hal-00694853v1
|
|
From transmission error measurement to Pulley-Belt slip determination in serpentine belt drives: influence of tensioner and belt characteristics12th IFToMM World Congress, Jun 2007, France
Communication dans un congrès
hal-00506311v1
|
|
Formulation analytique de la dynamique de déploiement dun hexapode spatial8ème colloque national en calcul des structures, May 2007, France
Communication dans un congrès
hal-00506307v1
|
|
Conservation de la relation entre niveau d'expression des gènes et organisation du chromosome chez Buchnera aphidicola, symbiote primaire des pucerons : exemple d'un génome réduit mais non dégénéréXVème Colloque de Physiologie de l'Insecte, Jul 2007, Rennes, France. pp.1-1
Communication dans un congrès
hal-00373311v1
|
|
Simplified formulae for determining the width of gear wheels of face gears using DOESimplified formulae for determining the width of gear wheels of face gears using DOE, Sep 2007, États-Unis
Communication dans un congrès
hal-00506686v1
|
|
Numerical and experimental study of the Loaded Transmission Error of a worm gear with a plastic wheelASME Design Engineering Technical Conferences DETC'07, Sep 2007, États-Unis
Communication dans un congrès
hal-00506268v1
|
|
Transverse Vibration Instabilities In Multiribbed Belt Transmission Subjected To Multi-Frequency Excitations: Modelling And ExperimentsASME, IDETC/CIE 2007, Sep 2007, États-Unis
Communication dans un congrès
hal-00506315v1
|
|
|
Formulation analytique de la dynamique de déploiement d'un hexapode spatial8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Communication dans un congrès
hal-01504285v1
|
Simplified formulae for determining the width of gear wheels of face gears using DOEIDETC/CIE2007, Sep 2007, Las-Vegas, United States
Communication dans un congrès
hal-00506267v1
|
|
A model to predict the deployment of a space hexapod12th IFToMM World Congress, Jun 2007, France
Communication dans un congrès
hal-00506308v1
|
|
Face gear width prediction using the DOE methodASME Design Engineering Technical Conferences DETC'07, Sep 2007, États-Unis
Communication dans un congrès
hal-00506324v1
|
|
Time frequency method for designing magnetorheological bushes on a vehicle rear suspension interfaceEUROMECH Colloquium 483 Geometrically Non-linear Vibrations of Structures, Jul 2007, France. pp.1-4
Communication dans un congrès
hal-00140123v1
|
|
Bilan de l'enseignement avec Smarteam en GMD à l'INSA de LyonREX PLM'06, Apr 2006, Paris, France. pp.CDRom
Communication dans un congrès
hal-00505939v1
|
|
Rôle des tendeurs sur le comportement dynamiquedune transmission par courroieXVème colloque "Vibrations, Chocs et Bruit 2006, Jun 2006, France
Communication dans un congrès
hal-00506835v1
|
|
Modal evolution of a deployable tape-spring hexapodEUROMECH 483 Geometrically Non-linear Vibrations of Structures, Jul 2006, Portugal
Communication dans un congrès
hal-00506880v1
|
|
Bilan de lenseignement avec Smarteam en GMD à lINSA de LyonREX PLM'08, Apr 2006, France
Communication dans un congrès
hal-00506899v1
|
|
A tape-spring telescope structure: deployment modellingThe 57th International Astronautical Congress, Oct 2006, Espagne
Communication dans un congrès
hal-00506909v1
|
|
Spatial transcriptomic patterns in the genome of the endosymbiotic bacterium Buchnera aphidicolaTheoretical Approaches for the Genome Workshop, Nov 2006, France
Communication dans un congrès
hal-00506911v1
|
|
Identification continue du comportement mécanique sur une base polynomiale de Chebyshev2° Journées Identification et Modélisation Expérimentale, Nov 2006, France
Communication dans un congrès
hal-00506825v1
|
|
Relationship between gene expression and genome properties in Buchnera aphidicola, the primary endosymbiont of the pea aphid Acyrthosiphon pisum5th International Symbiosis Society (ISS) Congress, 2006, Vienna (Autriche), août 2006, France. pp.1-1
Communication dans un congrès
hal-00391524v1
|
|
Hysteretic behaviour of tape-spring actuators : Influence on the deployment of an hexapodISMA2006 International Conference on Noise and Vibration Engineering, Sep 2006, Belgique
Communication dans un congrès
hal-00506820v1
|
|
Modal identification for modeling a deployed tape-spring hexapodThe 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, May 2006, États-Unis
Communication dans un congrès
hal-00506877v1
|
|
A Tape-spring hexapod for deployable telescopes: dynamicsThe 6th Internat. Conf. on Space Optics, ESA/ESTEC, Jun 2006, Pays-Bas
Communication dans un congrès
hal-00506882v1
|
|
Relationships between gene expression and genome properties in Buchnera aphidicola, the primary endosymbiont of the pea aphid5th International of Symbiosis Society Congress, Aug 2006, Autriche
Communication dans un congrès
hal-00506826v1
|
|
Spatial transcriptomic patterns in the genome of the endosymbiotic bacterium Buchnera aphidicolaWorkshop "Theoretical Approaches for the Genome", 2006, Annecy-le-Vieux (France), novembre 2006, France. pp.1-1
Communication dans un congrès
hal-00391525v1
|
|
Caractérisation du suivi de comportement modal d'une structure discrète évolutiveXVème colloque, Vibrations, chocs et bruits, Jun 2006, France
Communication dans un congrès
hal-00506821v1
|
|
Enseignement avec Smarteam en GMD à l'INSA de Lyon et jeu PLM - un TP entre deux école d'ingénieur : INSA - ENISEJournée de visibilité VISI30: Quel PLM/PDM avec CATIA V5, Jun 2006, France
Communication dans un congrès
hal-00506824v1
|
|
Enseignement des SGDT au Département Génie Mécanique Développement INSA de LyonConférence invitée à l'Atelier PLM, 9ème colloque AIP-PRIMECA, Apr 2005, France
Communication dans un congrès
hal-00507251v1
|
|
Systèmes mécaniques et paramétrage dans CATIA V51er Ateliers CATIA V5, Oct 2005, France
Communication dans un congrès
hal-00507253v1
|
|
|
Simulation numérique et mesure de l'erreur de transmission d'engrenage spiro-conique aéronautique17e Congrès Français de Mécanique, Aug 2005, Troyes, France
Communication dans un congrès
hal-04219969v1
|
L'enseignement des PLM avec SMARTEAM à l'INSA de LyonJournée SMARTEAM Academy, Jul 2005, France
Communication dans un congrès
hal-00507252v1
|
|
Numerical and experimental study of the loaded transmission error of a spiral bevel gearProceeding of DETC'05, ASME 2005 Design Engineering Technical Conferences and Computer and Information in Engineering Conference, Sep 2005, États-Unis
Communication dans un congrès
hal-00507247v1
|
|
|
L'enseignement de l’Ingénierie Simultanée par un « jeu collaboratif multimédia en réseau »17e Congrès Français de Mécanique, Aug 2005, Troyes, France. pp.1-6
Communication dans un congrès
hal-04226989v1
|
WEB educational portal for the teaching of mechanical design and manufacturing.EASED 2004 - In Perspectives from Europe and Asia on Engineering Design and Manufacture, Apr 2004, Chine. 1782pp
Communication dans un congrès
hal-00507324v1
|
|
Mesures de phénomènes non linéaires dans la façade accessoires d'un moteur thermiqueXIV ème colloque national "Vibrations, chocs et bruit" 2004, Jun 2004, France. pp.1-5
Communication dans un congrès
hal-00507439v1
|
|
Application pédagogique de l'ingenierie simultanée à partir d'un simulateur dédié à la maquette numérique (MECAGORA)AIP-PRIMECA - Institut ouvert, Sep 2004, France
Communication dans un congrès
hal-00507406v1
|
|
Measurement of non-linear phenomena on the front end accessory drive of an automotive engine14° Colloque Vibrations, chocs et bruits, Jun 2004, Lyon, France. pp.1-7
Communication dans un congrès
hal-00694863v1
|
|
Mesures d'erreur de transmission à l'aide de codeurs optiques et magnétiquesJournée ARATEM, Oct 2004, France
Communication dans un congrès
hal-00507405v1
|
|
De la CMAO aux SGDT: enseignement au département GMD-INSA LyonJournée thématique AIP-PRIMECA SGDT, May 2004, France
Communication dans un congrès
hal-00507375v1
|
|
Sensibilisation à l'intégration du savoir-faire sous CATIA V5 dans la formation en CMAOGFUC, journée visibilitéé VISI-26, Jun 2004, France
Communication dans un congrès
hal-00507380v1
|
|
Experimental/Numerical analysis of the timing belt drive of a V6 engineProceeding of DETC'03, 9th International Power Transmission and Gearing Conference 2003, ASME conference, Sep 2003, États-Unis
Communication dans un congrès
hal-00507896v1
|
|
Formation à l'ingénierie simultanée et aux SGDT au département GMD de l'INSA de LyonCommission formation du Groupement Francophone des Utilisateurs CATIA (GFUC), Apr 2003, France
Communication dans un congrès
hal-00507927v1
|
|
Mesures et réponses de machines tournantes présentant une géométrie périodique discrète2ème Colloque d'Analyse Vibratoire Expérimentale, Nov 2003, France
Communication dans un congrès
hal-00507902v1
|
|
l'Enseignement des SGDT avec SMARTEAM à l'INSA de LyonJournée AIP-PRIMECA "SMARTEAM", Oct 2003, France
Communication dans un congrès
hal-00507903v1
|
|
Experimental study of the transmission error for the detection of gears faultsASME TURBO EXPO 2003, IGTI Congress 2003, Jun 2003, États-Unis
Communication dans un congrès
hal-00507900v1
|
|
L'Ingénierie simultanée: Projet Mecagora Module M8Commission travail collaboratif du GFUC, Oct 2003, France
Communication dans un congrès
hal-00507904v1
|
|
Meshing stiffness and tooth root stress for internal cylindrical geears with thin rimASME, 9th International Power Transmission and Gearing Conference. DETC Computers and Information, Sep 2003, États-Unis
Communication dans un congrès
hal-00507926v1
|
|
Exemple d'application des TIC pour un projet de création de support pédagogique : OPALYSCongrès TICE 2002, Nov 2002, France
Communication dans un congrès
hal-00508011v1
|
|
Determination of Timing Belt Performances For Industrial ApplicationsJSME, International Conference on Motion and Power Transmissions (MPT 2001), Nov 2001, Japon
Communication dans un congrès
hal-00508105v1
|
|
Experimental modeling of gear noise : an hybrid model available for designerIDMME 2000, Forum 2000 SCGM/CSME, May 2000, Canada
Communication dans un congrès
hal-00508206v1
|
|
Conception et optimisation des engrenages par le contrôle de l'Erreur de TransmissionACFAS, Association Canadienne-Française pour l'Avancée de la Science, May 2000, Canada
Communication dans un congrès
hal-00508200v1
|
|
Advantages and perspectives of gear Transmission Error measurement with optical encodersCongrès Mondial des Engrenages et Transmissions, Mar 1999, Paris, France. pp.1789-1800
Communication dans un congrès
hal-00694850v1
|
|
Computation and measurement of the kinematical motion error of actual hypoid gears under loadCongrès Mondial des Engrenages et Transmissions, Mar 1999, Paris, France. pp.1935-1946
Communication dans un congrès
hal-00694849v1
|
|
Modélisation paramétrique du comportement acoustique d'un couple d'engrenages à partir de l'Erreur de TransmissionCongrès Mondial des Engrenages et Transmissions, Mar 1999, Paris, France. pp.1949-1960
Communication dans un congrès
hal-00694847v1
|
|
Mesures de l'Erreur de Transmission sur une boîte de vitesses automobileColloque Vibrations, Chocs et Bruit, Jun 1998, LYON, France. pp.1-7
Communication dans un congrès
hal-00694862v1
|
|
Condition monitoring : Experimental study of the Transmission Error for the detection of gear faultsIFToMM Conference, Sep 1998, Darmstadt, Germany. pp.1-6
Communication dans un congrès
hal-00694846v1
|
|
Modèles paramétriques et équations différentielles caractéristiques du transfert entre erreur de transmission et bruit d'engrènementColloque Vibrations, Chocs et Bruit, Jun 1998, LYON, France. pp.1-7
Communication dans un congrès
hal-00694861v1
|
|
Comparison of the calculated and measured kinematical motion error in hypoid gearsCongrès CANCAM 97, Jun 1997, Québec, Canada. pp.135-136
Communication dans un congrès
hal-00694859v1
|
|
Practical performances in high speed measurement of gear Transmission Error using optical encodersCongrès CANCAM 97, Jun 1997, Québec, Canada. pp.141-142
Communication dans un congrès
hal-00694860v1
|
|
Design of advanced mechanical systems, realistic gear dynamic modelisationInternational Conference on Gears, Apr 1996, Dresden, Germany. pp.115-127
Communication dans un congrès
hal-00694841v1
|
|
Dynamic Transmission Error of cylindrical gears comparison of experimental measurement and numerical calculationDesign Engineering, Oct 1996, SAN DIEGO, United States. pp.519-526
Communication dans un congrès
hal-00694844v1
|
|
Gear noise and Transmission Error correlations in real operating conditionsEuro Noise Conference, 1995, LYON, France. pp.1-7
Communication dans un congrès
hal-00694837v1
|
|
Comparison of experimental measurement and numerical calculation of gear Transmission Error under various dynamic conditions9th Congress International On the Theory of Machine and Mechanism, Aug 1995, Milano, Italy. pp.585-591
Communication dans un congrès
hal-00694839v1
|
|
Experimental study of faults influence on vibration and noise measurements in gear transmission mechanismsInternational Gearing Conference, 1994, Newcastle, United Kingdom. pp.1-6
Communication dans un congrès
hal-00694836v1
|
|
New Transmission Error Measurement for Heavy Load GearsInternational Gearing Conference, 1994, France
Communication dans un congrès
hal-00109090v1
|
|
Suivi du bruit d'engrènement : évolution avec les profils en contactCongrès Mondial Engrenages et Transmission, Feb 1992, Paris, France. pp.775-785
Communication dans un congrès
hal-00692577v1
|
|
A systematic approach of the effect design parameter on spectral and wavelet gear noise analysisMotion and Power Transmission Conference, Nov 1991, Hiroshima, Japan. pp.128-133
Communication dans un congrès
hal-00692576v1
|
|
Discrete wavelets and fast wavelet transformConference on Analysis of Controlled Dynamical Systems, 1991, Lyon, France. pp.88-97
Communication dans un congrès
hal-00692574v1
|
|
Dynamic characteristics of manipulator jointsInternational Computers in Engineering Conference and Exhibit, Aug 1989, Anheim, CA, United States. pp.447-451
Communication dans un congrès
hal-00692572v1
|
|
Simulation et analyse du bruit d'engrènement8° Colloque Vibrations Chocs et Bruit, 1989, LYON, France. pp.1-7
Communication dans un congrès
hal-00694858v1
|
Management de projets industrielsSciences humaines et technologie. Pôle éditorial UTBM, pp.1, 2008
Ouvrages
hal-00383663v1
|
|
Comportement dynamique et acoustique des transmissions par engrenages : synthèse bibliographiqueCETIM, pp.127, 1993
Ouvrages
hal-00694869v1
|
Reconstruction of the Instantaneous Angular Speed Variations Caused by a Spall Defect on a Rolling Bearing Outer Ring Correlated with the Length of the DefectAdvances in Condition Monitoring of Machinery in Non-Stationary Operations, Springer Berlin Heidelberg, pp.335-345, 2013, 978-3-642-39347-1. ⟨10.1007/978-3-642-39348-8_28⟩
Chapitre d'ouvrage
hal-00905092v1
|
|
Modèles paramétriques et Equations Différentielles Caractéristiques du transfert entre l'Erreur de Transmission et le Bruit d'EngrènementContributions en CMVAO mécanique, Transilvania, pp.13-25, 1998
Chapitre d'ouvrage
hal-00694866v1
|
|
Mesures et analyse de l'Erreur de Transmission d'engrenages avec défauts à haute vitesse à l'aide de codeurs optiquesContributions en CMVAO mécanique, Transilvania, pp.1-12, 1998
Chapitre d'ouvrage
hal-00694867v1
|
|
L'engrènement : une Liaison ExcitatriceUne expérience en CAO mécanique, TQMM, pp.195-232, 1997
Chapitre d'ouvrage
hal-00694868v1
|
CHARMILLES: Modélisation du comportement de platine de déroulement de fil d'une machine d'électroérosion2003
Autre publication scientifique
hal-00454879v1
|
|
SKF ERC HOLLANDE, Transmission error measurements on ES9 PSA Engine2001
Autre publication scientifique
hal-00455937v1
|
|
SEVA-PROBAR, Rapport final : Définition des profils de barrettes2000
Autre publication scientifique
hal-00450467v1
|
|
SEVA-PROBAR, Rapport final : Définition des profils de barrettes2000
Autre publication scientifique
hal-00450532v1
|
|
Contribution à l'étude et à l'analyse du bruit d'engrènement. Développement et application de la Transformée en OndelettesGénie mécanique [physics.class-ph]. INSA de Lyon, 1991. Français. ⟨NNT : ⟩
Thèse
tel-00692571v1
|