Accéder directement au contenu

Denis Favier

170
Documents

Présentation

Publications

Image document

Anisotropy and Clausius-Clapeyron relation for forward and reverse stress-induced martensitic transformations in polycrystalline NiTi thin walled tubes

Estephanie Nobre Dantas Grassi , Grégory Chagnon , Henrique Martinni Ramos de Oliveira , Denis Favier
Mechanics of Materials, 2020, 146, ⟨10.1016/j.mechmat.2020.103392⟩
Article dans une revue hal-02537803v2
Image document

Specific forward/reverse latent heat and martensite fraction measurement during superelastic deformation of nanostructured NiTi wires

Henrique Martinni Ramos de Oliveira , Hervé Louche , Estephanie Nobre Dantas Grassi , Denis Favier
Materials Science and Engineering: A, 2020, 774, pp.138928. ⟨10.1016/j.msea.2020.138928⟩
Article dans une revue hal-02470296v1
Image document

Evaluation of a biodegradable PLA–PEG–PLA internal biliary stent for liver transplantation: in vitro degradation and mechanical properties

Edouard Girard , Grégory Chagnon , Alexandre Moreau-Gaudry , Christian Letoublon , Denis Favier
Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2020, ⟨10.1002/jbm.b.34709⟩
Article dans une revue hal-02961051v1
Image document

Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis

Thierry Alonso , Denis Favier , Grégory Chagnon
Journal of Materials Engineering and Performance, 2019, ⟨10.1007/s11665-019-04225-6⟩
Article dans une revue hal-02195024v1
Image document

Experimental characterization and constitutive modeling of the biomechanical behavior of male human urethral tissues validated by histological observations

Christopher Masri , Grégory Chagnon , Denis Favier , Hervé Sartelet , Edouard Girard
Biomechanics and Modeling in Mechanobiology, 2018, ⟨10.1007/s10237-018-1003-1⟩
Article dans une revue hal-01807582v1
Image document

Influence of processing parameters on the macroscopic mechanical behavior of PVA hydrogels

Christopher Masri , Grégory Chagnon , Denis Favier
Materials Science and Engineering: C, 2017, 75, pp.769-776. ⟨10.1016/j.msec.2017.02.045⟩
Article dans une revue hal-01481365v1
Image document

A method to determine the shear and compressive stress-strain curves from torsion and bending tests of thin wires

Nathanaël Connesson , Gabriel Antherieu , Denis Favier
Strain, 2017, 53 (3), pp.e12227
Article dans une revue hal-02005743v1
Image document

Mechanical behavior of architectured photosensitive silicone membranes: Experimental data and numerical analysis

Guilherme Machado , Arthur Stricher , Grégory Chagnon , Denis Favier
Mechanics of Advanced Materials and Structures, 2016, 24 (6), pp.524-533. ⟨10.1080/15376494.2016.1161096⟩
Article dans une revue hal-01480538v1
Image document

Light-Induced Bulk Architecturation of PDMS Membranes

Arthur Stricher , R.G. Rinaldi , Guilherme Machado , Grégory Chagnon , Denis Favier
Macromolecular Materials and Engineering, 2016, 301, pp.1151-1157. ⟨10.1002/mame.201600237⟩
Article dans une revue hal-01399334v1
Image document

Mechanical behaviour'sevolution of a PLA-b-PEG-b-PLA triblock copolymer during hydrolytic degradation

Quentin Breche , Grégory Chagnon , Guilherme Machado , Edouard Girard , Benjamin Nottelet
Journal of the mechanical behavior of biomedical materials, 2016, 60, pp.288-300. ⟨10.1016/j.jmbbm.2016.02.015⟩
Article dans une revue hal-01369301v1
Image document

A non-linear viscoelastic model to describe the mechanical behavior's evolution of biodegradable polymers during hydrolytic degradation

Quentin Breche , Grégory Chagnon , Guilherme Machado , Benjamin Nottelet , Xavier Garric
Polymer Degradation and Stability, 2016, 131, pp.145-156. ⟨10.1016/j.polymdegradstab.2016.07.014⟩
Article dans une revue hal-01369282v1
Image document

Development and modeling of filled silicone architectured membranes

Marie Rebouah , Grégory Chagnon , Denis Favier
Meccanica, 2015, 50 (1), pp.11-24. ⟨10.1007/s11012-014-0065-0⟩
Article dans une revue hal-01480381v1
Image document

Superelastic cellular NiTi tube-based materials: Fabrication, experiments and modeling

Guilherme Machado , Hervé Louche , Thierry Alonso , Denis Favier
Materials & Design, 2015, 65, pp.212-220. ⟨10.1016/j.matdes.2014.09.007⟩
Article dans une revue hal-01285370v1
Image document

Study of electropulse heat treatment of cold worked NiTi wire: From uniform to localised tensile behaviour

Vincent Delobelle , Grégory Chagnon , Denis Favier , Thierry Alonso
Journal of Materials Processing Technology, 2015, 227, pp.244-250. ⟨10.1016/j.jmatprotec.2015.08.011⟩
Article dans une revue hal-01480523v1
Image document

Radiopaque poly(e-caprolactone) as additive for X-ray imaging of temporary implantable medical devices

Rémi Samuel , Edouard Girard , Grégory Chagnon , Stéphane Dejean , Denis Favier
RSC Advances, 2015, 5, pp.84125-84133. ⟨10.1039/c5ra19488a⟩
Article dans une revue hal-01369275v1
Image document

Hyperelastic Energy Densities for Soft Biological Tissues: A Review

Grégory Chagnon , Marie Rebouah , Denis Favier
Journal of Elasticity, 2015, 120 (2), pp.129-160. ⟨10.1007/s10659-014-9508-z⟩
Article dans une revue hal-01480510v1
Image document

Determination of Local Thermophysical Properties and Heat of Transition from Thermal Fields Measurement During Drop Calorimetric Experiment

Vincent Delobelle , Denis Favier , Hervé Louche , Nathanael Connesson
Experimental Mechanics, 2015, 55 (4), pp.711-723. ⟨10.1007/s11340-014-9877-z⟩
Article dans une revue hal-01300519v1
Image document

Anisotropic large deformation of geometrically architectured unfilled silicone membranes

Luc Meunier , Grégory Chagnon , Denis Favier , Laurent Orgéas
European Journal of Mechanics - A/Solids, 2015, 50, pp.87-99. ⟨10.1016/j.euromechsol.2014.11.002⟩
Article dans une revue hal-01480397v1
Image document

An original architectured NiTi silicone rubber structure for biomedical applications

Thierry Rey , Jean-Benoit Le Cam , Grégory Chagnon , Denis Favier , Marie Rebouah
Materials Science and Engineering: C, 2014, 45, pp.184-190. ⟨10.1016/j.msec.2014.08.062⟩
Article dans une revue hal-03690559v1
Image document

Numerical study on the effect of the paint layer used for infrared thermography on heat source estimation

Vincent Delobelle , Hervé Louche , D Favier
Quantitative InfraRed Thermography Journal, 2014, 11 (2), pp.233-249. ⟨10.1080/17686733.2014.971618⟩
Article dans une revue hal-01280470v1
Image document

Mechanical characterization and comparison of different NiTi/silicone rubber interfaces

Thierry Rey , Florence Razan , Eric Robin , Sylvain Faure , Jean-Benoît Le Cam
International Journal of Adhesion and Adhesives, 2014, 48, pp.67-74. ⟨10.1016/j.ijadhadh.2013.09.028⟩
Article dans une revue hal-00963798v1
Image document

A conical mandrel tube drawing test designed to assess failure criteria

Camille Linardon , Denis Favier , Grégory Chagnon , Benoit Gruez
Journal of Materials Processing Technology, 2014, pp.347-357
Article dans une revue hal-00936544v1
Image document

Young’s Modulus of Austenite and Martensite Phases in Superelastic NiTi Wires

Petr Šittner , Ludek Heller , Jan Pilch , Caroline Curfs , Thierry Alonso
Journal of Materials Engineering and Performance, 2014, 23 (7), pp.2303-2314. ⟨10.1007/s11665-014-0976-x⟩
Article dans une revue hal-02022634v1
Image document

Theory and identification of a constitutive model of induced anisotropy by the Mullins effect

Guilherme Machado , Grégory Chagnon , Denis Favier
Journal of the Mechanics and Physics of Solids, 2014, 63, pp.29-39. ⟨10.1016/j.jmps.2013.10.008⟩
Article dans une revue hal-00958608v1
Image document

Hyperelasticity with rate-independent microsphere hysteresis model for rubberlike materials

Thierry Rey , Grégory Chagnon , Denis Favier , Jean-Benoit Le Cam
Computational Materials Science, 2014, 90, pp.89-98. ⟨10.1016/j.commatsci.2014.03.068⟩
Article dans une revue hal-01063253v1
Image document

NiTi based stent for the treatment of acute urinary retention due to benign prostatic hyperplasia: a preliminary study on NiTi wires and tubes under pure bending

Gabriel Antherieu , Nathanaël Connesson , Yohan Payan , Denis Favier , Pierre Mozer
Computer Methods in Biomechanics and Biomedical Engineering, 2014, 17, pp.190 - 191. ⟨10.1080/10255842.2014.931679⟩
Article dans une revue hal-01108621v1
Image document

Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers

Thierry Rey , G. Chagnon , Jean-Benoit Le Cam , Denis Favier
Polymer Testing, 2013, 32 (3), pp.492 - 501. ⟨10.1016/j.polymertesting.2013.01.008⟩
Article dans une revue hal-01073891v1

Resistance welding of NiTi shape memory alloy tubes

Vincent Delobelle , Patrick Delobelle , Yehan Liu , D. Favier , Hervé Louche
Journal of Materials Processing Technology, 2013, 213, pp.1139-1145. ⟨10.1016/j.jmatprotec.2013.01.013⟩
Article dans une revue hal-00835925v1
Image document

Anisotropic Mullins stress softening of a deformed silicone holey plate

Marie Rebouah , Guilherme Machado , Grégory Chagnon , Denis Favier
Mechanics Research Communications, 2013, 49, pp.36-43. ⟨10.1016/j.mechrescom.2013.02.002⟩
Article dans une revue hal-01974917v1
Image document

Heat Estimation from Infrared Measurement Compared to DSC for Austenite to R Phase Transformation in a NiTi Alloy

Vincent Delobelle , Denis Favier , Hervé Louche
Journal of Materials Engineering and Performance, 2013, 22 (6), pp.1688-1693. ⟨10.1007/s11665-012-0466-y⟩
Article dans une revue hal-01300481v1
Image document

Cold drawing of 316L stainless steel thin-walled tubes: experiments and finite element analysis

Muriel Palengat , Grégory Chagnon , Denis Favier , Hervé Louche , Camille Linardon
International Journal of Mechanical Sciences, 2013, 70, pp.69-78. ⟨10.1016/j.ijmecsci.2013.02.003⟩
Article dans une revue hal-00936527v1
Image document

Induced anisotropy by the Mullins effect in filled silicone rubber

Guilherme Machado , Grégory Chagnon , Denis Favier
Mechanics of Materials, 2012, 50, pp.70-80. ⟨10.1016/j.mechmat.2012.03.006⟩
Article dans une revue hal-01974831v1
Image document

Membrane Curvatures and Stress-strain Full Fields of Axisymmetric Bulge Tests from 3D-DIC Measurements. Theory and Validation on Virtual and Experimental results

Guilherme Machado , Denis Favier , Grégory Chagnon
Experimental Mechanics, 2012, 52 (7), pp.865-880. ⟨10.1007/s11340-011-9571-3⟩
Article dans une revue hal-01974147v1
Image document

An osmotically inflatable seal to treat endoleaks of type 1, following endovascular aneurysm repair

Grégory Chagnon , Vincent Gaudin , Denis Favier , Laurent Orgéas , Philippe Cinquin
Journal of Mechanics in Medicine and Biology, 2012, 12 (4), pp.1250070. ⟨10.1142/S0219519412004958⟩
Article dans une revue hal-01974834v1
Image document

Heat Source Processing for Localized Deformation With Non-Constant Thermal Conductivity. Application to Superelastic Tensile Tests of NiTi Shape Memory Alloys

Hervé Louche , Pauline Schlosser , Denis Favier , Laurent Orgéas
Experimental Mechanics, 2012, 52 (9), pp.1313-1328. ⟨10.1007/s11340-012-9607-3⟩
Article dans une revue hal-00787054v1

Assessment of tension-compression asymmetry of NiTi using circular bulge testing of thin plates

Vincent Grolleau , Hervé Louche , Vincent Delobelle , A. Penin , Gérard Rio
Scripta Materialia, 2011, 65 (4), pp.347-350. ⟨10.1016/j.scriptamat.2011.05.003⟩
Article dans une revue hal-00757982v1
Image document

Analysis of the isotropic models of the Mullins effect based on filled silicone rubber experimental results

Guilherme Machado , Grégory Chagnon , Denis Favier
Mechanics of Materials, 2010, 42 (9), pp.841-851. ⟨10.1016/j.mechmat.2010.07.001⟩
Article dans une revue hal-01974135v1
Image document

A numerical analysis of the evolution of bundle orientation in concentrated fibre-bundle suspensions

Pierre J.J. Dumont , Steven Le Corre , Laurent Orgéas , Denis Favier
Journal of Non-Newtonian Fluid Mechanics, 2009, 160 (2-3), pp.76-92. ⟨10.1016/j.jnnfm.2009.03.001⟩
Article dans une revue hal-01004927v1
Image document

X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites

Thaihung Le , Pierre J.J. Dumont , L. Orgéas , D. Favier , Luc Salvo
Composites Part A: Applied Science and Manufacturing, 2008, 39, pp.91-103. ⟨10.1016/j.compositesa.2007.08.027⟩
Article dans une revue hal-00374957v1
Image document

Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements

Pauline Schlosser , Denis Favier , Hervé Louche , Laurent Orgéas
Advances in Science and Technology, 2008, 59, pp.140-149. ⟨10.4028/3-908158-16-8.140⟩
Article dans une revue hal-00336736v1
Image document

Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber

Luc Meunier , Grégory Chagnon , Denis Favier , Laurent Orgéas , Pierre Vacher
Polymer Testing, 2008, 27, pp.765-777. ⟨10.1016/j.polymertesting.2008.05.011⟩
Article dans une revue hal-00328231v1

Lubricated compression of BMC, a concentrated and fibre-reinforced granular polymer suspension

Pierre J.J. Dumont , D. Favier , T.H. Le , Laurent Orgéas
Rheologica Acta, 2008, 47 (5-6), pp.677-688
Article dans une revue hal-00449005v1
Image document

Image processing to estimate the heat sources related to phase transformations durint tensile test of NiTi tubes

Pauline Schlosser , Hervé Louche , Denis Favier , Laurent Orgéas
Strain, 2007, 43, pp.260-271. ⟨10.1111/j.1475-1305.2007.00350.x⟩
Article dans une revue hal-00180898v1
Image document

Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8 at% Ni thin tube under tension. Investigation via temperature and strain fields measurements

Denis Favier , Hervé Louche , Pauline Schlosser , Laurent Orgéas , Pierre Vacher
Acta Materialia, 2007, 55 (16), pp.5310-5322. ⟨10.1016/j.actamat.2007.05.027⟩
Article dans une revue hal-00336739v1

Processing, characterization and rheology of transparent concentrated fibre-bundle suspensions

Pierre J.J. Dumont , D. Favier , J.A.E. Manson , L. Orgeas , J.P. Vassal
Rheologica Acta, 2007, 46 (5), pp.639-651
Article dans une revue hal-00292089v1
Image document

Compression moulding of SMC: in situ experiments, modelling and simulation

Pierre J.J. Dumont , Laurent Orgéas , Denis Favier , Patrick Pizette , Cécile Venet
Composites Part A: Applied Science and Manufacturing, 2007, 38A (2), pp.353-368. ⟨10.1016/j.compositesa.2006.03.010⟩
Article dans une revue hal-00292081v1

Influence of thermomechanical processing on the superelastic properties of a Ni-rich nitinol shape memory alloy

D. Favier , Yehan Liu , L. Orgeas , Arnaud Sandel , L. Debove
Materials Science and Engineering: A, 2006, pp.130-136
Article dans une revue hal-00383401v1
Image document

Une approche multi-échelle de la rhéologie des suspensions concentrées de fibres

Steven Le Corre , Pierre J.J. Dumont , Laurent Orgéas , Denis Favier
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2005, 15 (3), pp.355-369. ⟨10.3166/rcma.15.355-369⟩
Article dans une revue hal-01007422v1
Image document

Behaviour of a net of fibers linked by viscous interactions: theory and mechanical properties

Steven Le Corre , Denis Caillerie , Laurent Orgéas , Denis Favier
Journal of the Mechanics and Physics of Solids, 2004, 52 (2), pp.395-421. ⟨10.1016/S0022-5096(03)00090-5⟩
Article dans une revue hal-01005308v1
Image document

Behavior of a net of fibers linked by viscous interactions: theory and mechanical properties

Steven Le Corre , Denis Caillerie , Laurent Orgéas , Denis Favier
Journal of the Mechanics and Physics of Solids, 2004, 52 (2), pp.395-421. ⟨10.1016/S0022-5096(03)00090-5⟩
Article dans une revue hal-00531571v1
Image document

Hysteretic behavior of a CuZnAl single crystal during super elastic shear deformation

Laurent Orgéas , Alexandre Vivet , Denis Favier , Christian Lexcellent , Yehan Liu
Scripta Materialia, 2004, 51 (4), pp. 297-302. ⟨10.1016/j.scriptamat.2004.04.033⟩
Article dans une revue hal-00019772v1
Image document

Anisotropic viscous behavior of sheet molding compounds (SMC) during compression molding

Pierre J.J. Dumont , Laurent Orgéas , Steven Le Corre , Denis Favier
International Journal of Plasticity, 2003, 19 (5), pp.625-646. ⟨10.1016/S0749-6419(01)00077-8⟩
Article dans une revue hal-01005261v1
Image document

Un modèle biphasique pour simuler la mise en forme par compression des composites à fibres courtes

Pierre J.J. Dumont , Steven Le Corre , Laurent Orgeas , Denis Favier
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (3), pp.477-497. ⟨10.3166/rcma.12.477-497⟩
Article dans une revue hal-01007421v1
Image document

Shear and compression behaviour of sheet moulding compounds

Steven Lecorre , Laurent Orgéas , Denis Favier , Ali Tourabi , Abderrahim Maazouz
Composites Science and Technology, 2002, 62 (4), pp.571 - 577. ⟨10.1016/S0266-3538(01)00151-8⟩
Article dans une revue hal-01007302v1
Image document

Experimental Study of Mechanical Hysteresis of NiTi During Ferroelastic and Superelastic Deformation

L. Orgéas , Yehan Liu , D. Favier
Journal de Physique IV Proceedings, 1997, 07 (C5), pp.C5-477-C5-482. ⟨10.1051/jp4:1997575⟩
Article dans une revue jpa-00255675v1
Image document

Finite Element Simulations of Internal Stresses Generated During the Ferroelastic Deformation of NiTi Bodies

P. Manach , D. Favier , G. Rio
Journal de Physique IV Proceedings, 1996, 06 (C1), pp.C1-235-C1-244. ⟨10.1051/jp4:1996123⟩
Article dans une revue jpa-00254155v1
Image document

Influence of Prior Thermomechanical Treatment on the Training Behaviour of a NiTi Alloy

D. Favier , Yehan Liu , P. Manach
Journal de Physique IV Proceedings, 1995, 05 (C2), pp.C2-391-C2-396. ⟨10.1051/jp4:1995260⟩
Article dans une revue jpa-00253645v1
Image document

Finite Elements Simulation of Mechanical Behaviour of Shape Memory Alloys Coupled with a Non-Stationary Thermal Field

G. Rio , D. Favier , H. Desplats
Journal de Physique IV Proceedings, 1995, 05 (C8), pp.C8-215-C8-220. ⟨10.1051/jp4:1995829⟩
Article dans une revue jpa-00254078v1
Image document

Finite element simulation of 3D mechanical behaviour of NiTi shape memory alloys

Gérard Rio , Pierre-Yves Manach , Denis Favier
Archives of Mechanics, 1995, 47 (3), pp.537-556
Article dans une revue hal-00648791v1
Image document

Application of the Beam Theory to Model the Pseudoelastic and Ferroelastic Bending of SMA Beams

L. Orgeas , D. Favier
Journal de Physique IV Proceedings, 1995, 05 (C2), pp.C2-519-C2-524. ⟨10.1051/jp4:1995280⟩
Article dans une revue jpa-00253666v1
Image document

EXPERIMENTAL STUDY FOR THE IDENTIFICATION OF A TENSORIAL SCHEME FOR SHAPE MEMORY ALLOYS

P. Manach , D. Favier
Journal de Physique IV Proceedings, 1991, 01 (C4), pp.C4-415-C4-420. ⟨10.1051/jp4:1991462⟩
Article dans une revue jpa-00250616v1

Influence Of Heat Treatment Temperature On Tension, Compression And Bending Behavior Of Nanostructured NiTi Wires

Nathanaël Connesson , Gabriel Antherieu , Thierry Alonso , Denis Favier
The International Conference on Shape Memory and Superelastic Technologies, May 2019, Konstanz, Germany
Communication dans un congrès hal-02314555v1

An experimental set-up to perform uniform tensile tests of superelastic NiTi tubes or wires

Thierry Alonso , Denis Favier , Nathanaël Connesson
International Conference on Shape Memory and Superelastic Technologies (SMST), May 2019, Konstanz, Germany
Communication dans un congrès hal-02133239v1

Influence of anisotropy on strain localization phenomenon in tension of superelastic NiTi thin walled tubes

Estephanie Nobre Dantas Grassi , Denis Favier , Grégory Chagnon
European Symposium on Martensitic Transformations, Aug 2018, Metz, France
Communication dans un congrès hal-01872343v1

Thermomechanical analysis of the deformation in tension of a nanocrystalline superelastic NiTi thin wire

Henrique Martinni Ramos de Oliveira , Hervé Louche , Denis Favier
10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy
Communication dans un congrès hal-01816031v1

Anisotropy and temperature dependence of superelastic behavior of NiTi shape memory alloy thin walled tubes

Estephanie Nobre Dantas Grassi , Denis Favier , Grégory Chagnon
10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy
Communication dans un congrès hal-01872398v1

Method to extract Stress-Strain functions from pure torsion/bending experimental tests

Nathanaël Connesson , Gabriel Antherieu , Denis Favier
EMMC16 16th European Mechanics of Materials Conference, Mar 2018, Nantes, France
Communication dans un congrès hal-02006079v1
Image document

How the evolution of the dynamic elastic modulus during isothermal tensile tests can bring new information on mechanisms deformation of a NiTi superelastic wire

Thierry Alonso , Denis Favier , Grégory Chagnon
International Conference on Shape Memory and Superelastic Technologies (SMST), May 2017, San Diego, United States
Communication dans un congrès hal-01872409v1
Image document

Anisotropic tensile behavior of NiTi Tubes and its dependence on temperature experimental results

Estephanie Nobre Dantas Grassi , Denis Favier , Grégory Chagnon
International Conference on Shape Memory and Superelastic Technologies (SMST), May 2017, San Diego, United States
Communication dans un congrès hal-01872416v1

Internal heat sources and transformation enthalpy of a nanostructured superelastic NiTi wire

Henrique Martinni Ramos de Oliveira , Hervé Louche , Denis Favier
EMMC15, Sep 2016, Bruxelles, Belgium
Communication dans un congrès hal-01772389v1
Image document

METHOD TO EXTRACT STRESS-STRAIN FUNCTIONS FROM PURE TORSION OR PURE BENDING EXPERIMENTAL TESTS

Nathanaël Connesson , Gabriel Antherieu , Denis Favier
17th International Conference on Experimental Mechanics (ICEM17), Jul 2016, Rhodes, Greece
Communication dans un congrès hal-02006055v1

Anisotropic thermomechanical properties of a superelastic Nickel-Titane thin tube

Estephanie Nobre Dantas Grassi , Denis Favier , Grégory Chagnon
15th European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium
Communication dans un congrès hal-01872428v1
Image document

Caractérisation mécanique In Vitro de tissus mous

Christopher Masri , Grégory Chagnon , Denis Favier , Edouard Girard
MECAMAT 2016, Jan 2016, Aussois, France
Communication dans un congrès hal-01807463v1

Experimental investigation of anisotropic mechanical behavior of ex vivo human urethral tissues

Christopher Masri , Grégory Chagnon , Denis Favier
15th European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium
Communication dans un congrès hal-01872440v1

Modelling of mechanical properties of a PLA-b-PEG-b-PLA biodegradable triblock copolymer during hydrolytic degradation

Quentin Breche , Edouard Girard , Guilherme Machado , Grégory Chagnon , Denis Favier
European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium
Communication dans un congrès hal-01872434v1

Lois hyper-viscoélastiques anisotropes des élastomères architecturès aux tissus du vivant

Grégory Chagnon , Denis Favier , Luc Meunier , Guilherme Machado , Marie Rebouah
Groupe de travail Mécanique des Polymères, Mar 2016, Paris, France
Communication dans un congrès hal-01986502v1

Modeling of mechanical properties of silicone elastomers

Grégory Chagnon , Guilherme Machado , Marie Rebouah , Thierry Rey , Denis Favier
10th International Workshop on Silicon-Based Polymers, Apr 2015, Aussois, France
Communication dans un congrès hal-01986507v1
Image document

Elaboration, modélisation et simulation de membranes architecturées

Marie Rebouah , Grégory Chagnon , Denis Favier
22e Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-01807467v1

Use of digital image correlation to analyse a membrane bulge test

Grégory Chagnon , Guilherme Machado , Denis Favier
Flexible Materials and Large Deformations, May 2015, Rennes, France
Communication dans un congrès hal-01986504v1
Image document

Caractérisation et modélisation de polymères PVA

Christopher Masri , Géraldine Penven , Grégory Chagnon , Denis Favier
22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-01872446v1
Image document

Développement et modélisation de membranes silicones architecturées

Grégory Chagnon , Marie Rebouah , Denis Favier
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01514292v1
Image document

Development and characterization of architectured silicone membranes

Grégory Chagnon , Arthur Stricher , Guilherme Machado , R.G. Rinaldi , François Ganachaud
9th European Solid Mechanics Conference (ESMC 2015), Jul 2015, Madrid, Spain
Communication dans un congrès hal-01872476v1
Image document

Evolution du comportement viscoélastique de copolymères triblocs PLA-PEG-PLA au cours de la dégradation par hydrolyse

Quentin Breche , Edouard Girard , Benjamin Nottelet , Xavier Garric , Guilherme Machado
22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-01872452v1
Image document

Biaxial testing of Knitted NiTi textiles: adapted image processing vs DIC

Nathanaël Connesson , François Tissot , Denis Favier , Ludek Heller
Photomechanics 2015, May 2015, Delf, Netherlands
Communication dans un congrès hal-02006098v1
Image document

Etude de l'interface NiTi/silicone

Thierry Rey , Jean-Benoit Le Cam , Grégory Chagnon , Denis Favier
3e journée thématique sur la caractérisation mécanique des élastomères : nouvelles approches, Sep 2014, Nantes, France
Communication dans un congrès hal-01079804v1

Alliages à mémoire de forme Nickel-Titane architecturés et à gradient. Applications médicales

Denis Favier , Thierry Alonso , Gabriel Antherieu , Grégory Chagnon , Nathanaël Connesson
Entretiens Jacques Cartier, Oct 2014, Montréal, Canada
Communication dans un congrès hal-01872510v1
Image document

An innovative NiTi based stent as an emergency treatment for acute urinary retention in case of benign prostatic hyperplasia

Gabriel Antherieu , Yohan Payan , Denis Favier , Nathanaël Connesson , Pierre Mozer
Surgetica 2014, 2014, Chambéry, France
Communication dans un congrès hal-01092754v1

Multimaterials and Architectured Materials for Medical Applications

Nathanaël Connesson , Grégory Chagnon , Denis Favier , Thierry Alonso , Quentin Breche
Architectured Biomaterials, Medical and Tissue Engineering, Dec 2014, Berlin, Germany
Communication dans un congrès hal-01872503v1
Image document

Développement et caractérisation mécanique de membranes silicone architecturées

Guilherme Machado , Arthur Stricher , R.G. Rinaldi , François Ganachaud , Denis Favier
3ème Journée Thématique sur la caractérisation mécanique des élastomères : nouvelles approches, Sep 2014, Nantes, France
Communication dans un congrès hal-01079792v1
Image document

An original method to estimate local thermophysical properties and latent heat from Thermal Field Measurement (TFM)

Vincent Delobelle , Denis Favier , Hervé Louche , N. Connesson
PhotoMechanics Conference, May 2013, Montpellier, France. pp.149-151
Communication dans un congrès hal-00942926v1
Image document

Dynamic Mechanical Spectroscopy of Nanograined Thin NiTi Wires

Thierry Alonso , Denis Favier , Grégory Chagnon , Petr Sittner , Liu Yinong
The International Conference on Shape Memory and Superelastic Technologies (SMST), May 2013, Prague, Czech Republic
Communication dans un congrès hal-01872585v1

Architectured biomaterials for medical devices

Nathanaël Connesson , Grégory Chagnon , Denis Favier , Thierry Alonso , Marie Rebouah
Architectured biomaterials for medical devices, Sep 2013, Grenoble, France
Communication dans un congrès hal-01872546v1
Image document

FE Modeling of NiTi Elastomeric Composites for Use as Biomaterials

François Tissot , Denis Favier , Nathanaël Connesson , Grégory Chagnon , Thierry Rey
Shape Memory and Superelastic Technologies, May 2013, Prague, Czech Republic
Communication dans un congrès hal-01872597v1
Image document

Etude du comportement thermomécanique d'un fil fin de NiTi par spectromètre dynamique mécanique et thermique

Thierry Alonso , Denis Favier , Grégory Chagnon
21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. pp.1-6
Communication dans un congrès hal-00963807v1
Image document

Effects of temperature on the mechanical behavior of filled and unfilled silicone rubbers

Thierry Rey , Grégory Chagnon , Jean-Benoit Le Cam , Denis Favier
8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.511-514
Communication dans un congrès hal-00936536v1

Design of specific experimental tests to evaluate formability prediction of cold drawing CoCr Tubes

Camille Linardon , Denis Favier , Grégory Chagnon , Benoit Gruez
Plasticity, Jan 2013, Nassau, Bahamas
Communication dans un congrès hal-01978923v1
Image document

Modeling of hysteresis by means of a directional approach. Constitutive Models

Thierry Rey , Grégory Chagnon , Denis Favier , Jean-Benoit Le Cam
8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sabastian, Spain. pp.107-110
Communication dans un congrès hal-00936538v1

Modélisation de l'adoucissement anisotrope dans le comportement hyperélastique des milieux du vivant

Guilherme Machado , Marie Rebouah , Grégory Chagnon , Denis Favier
GDR Mécanotransduction, Sep 2013, Grenoble, France
Communication dans un congrès hal-01872528v1
Image document

Development of constitutive equation of filled silicone architectured membrane

Marie Rebouah , Grégory Chagnon , Denis Favier
8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.431-435
Communication dans un congrès hal-00936541v1
Image document

Anisotropic modeling of the Mullins effect and the residual strain of filled silicone rubber

Marie Rebouah , Grégory Chagnon , Denis Favier
8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.431-435
Communication dans un congrès hal-00936540v1

Validation de LASTIC (Light Aspiration device for in vivo Soft TIssue Characterization) sur des élastomères

Vincent Luboz , Emmanuel Promayon , Grégory Chagnon , Thierry Alonso , Christine Barthod
2e Journée thématique sur la caractérisation mécanique des élastomères, May 2012, Grenoble, France. pp.1
Communication dans un congrès hal-00739433v1

Validation d'un modèle anisotrope de l'effet Mullins par l'étude d'une plaque trouée en silicone chargé

Marie Rebouah , Guilherme Machado , Grégory Chagnon , Denis Favier
2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France
Communication dans un congrès hal-01875143v1
Image document

Comparison of LASTIC (Light Aspiration device for in vivo Soft TIssue Characterization) with classic Tensile Tests.

Emmanuel Promayon , Vincent Luboz , Grégory Chagnon , Thierry Alonso , Denis Favier
Advanced experimental approaches and inverse problems in tissue biomechanics., 2012, Saint-Etienne, France. pp.75-76
Communication dans un congrès hal-00705487v1

Caractérisation de l’anisotropie de l’effet Mullins sur des essais non classiques

Guilherme Machado , Grégory Chagnon , Denis Favier
2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France
Communication dans un congrès hal-01875140v1
Image document

Modelling of the Induced Anisotropy by Mullins Effect

Guilherme Machado , Marie Rebouah , Grégory Chagnon , Denis Favier
8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria
Communication dans un congrès hal-01875137v1

Measurement by DMA in Tension of Elastic Moduli and Transformation Behaviour of fine Nitinol Medical Wires as function of Stress and Temperature

Thierry Alonso , Denis Favier , Grégory Chagnon , Petr Sittner
8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria
Communication dans un congrès hal-01875138v1

Experimental characterization and modeling of the mechanical behavior of architectured tube-based NiTi materials

Guilherme Machado , Hervé Louche , Denis Favier , Yehan Liu
Archimat 2012, Oct 2012, Prague, Czech Republic
Communication dans un congrès hal-00809144v1

Mechanical behaviour of architectured NiTi materials in complex loading

Denis Favier , Thierry Alonso , Grégory Chagnon , Vincent Delobelle , Hervé Louche
CIMTEC, Jun 2012, Montecatini Terme, Italy
Communication dans un congrès hal-00809087v1

Modelling of the behaviour of filled silicone architectured membrane

Marie Rebouah , Grégory Chagnon , Denis Favier
Archimat - Architectured Materials Workshop, Oct 2012, Prague, Czech Republic
Communication dans un congrès hal-01875136v1
Image document

Experiments and modeling of smart silicone elastomer membranes reinforced with shaped NiTi textiles

François Tissot , Thierry Rey , Ludek Heller , Nathanaël Connesson , Grégory Chagnon
8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria
Communication dans un congrès hal-01875139v1

Influence de la température sur le comportement mécanique d' un élastomère silicone chargé

Thierry Rey , Grégory Chagnon , Jean-Benoit Le Cam , Denis Favier
2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France
Communication dans un congrès hal-01875141v1
Image document

EXPERIMENTAL AND NUMERICAL STUDY OF NITI HOLEY PLATES LOADED IN TENSION

Christophe Cellard , Gérard Rio , Shariat Bashir S. , Yinong Liu , Vincent Grolleau
ESOMAT 2012, Sep 2012, Sankt Peterburg, Russia
Communication dans un congrès hal-00761157v1

Use of resistance welding to join NiTi SMAs tubes

Vincent Delobelle , Denis Favier , Hervé Louche
Archimat 2011, May 2011, Grenoble, France
Communication dans un congrès hal-00809256v1

Anisotropy of the Mullins effect in particle-reinforced silicone rubber

Grégory Chagnon , Guilherme Machado , Denis Favier
Archimat 2011, May 2011, Autrans, France
Communication dans un congrès hal-01875145v1
Image document

From the experimental determination of stress-strain full fields during a bulge test thanks to 3D-DIC technique to the characterization of anisotropic Mullins effect

Guilherme Machado , Denis Favier , Grégory Chagnon
7th European Conference on Constitutive Models for Rubber, Sep 2011, Dublin, Ireland
Communication dans un congrès hal-01978920v1
Image document

Simulation of Drawing of Small Stainless Steel Platinum Medical Tubes-Influence of the Tool Parameters on the Forming Limit

Camille Linardon , Jean-Sébastien Affagard , Grégory Chagnon , Denis Favier , Benoit Gruez
THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011, Apr 2011, Belfast, Ireland. ⟨10.1063/1.3589553⟩
Communication dans un congrès hal-01978919v1
Image document

Validation expérimentale d'estimations de sources de chaleur - Cas uniforme

Vincent Delobelle , Denis Favier , Hervé Louche
CFM, Aug 2011, Besançon, France
Communication dans un congrès hal-00813097v1

Determination of heat capacity and thermal conductivity of NiTi

Vincent Delobelle , Denis Favier , Hervé Louche
International Conference on Martensitic Transformations (ICOMAT), Sep 2011, Osaka, Japan
Communication dans un congrès hal-00811428v1
Image document

Experimental validation of heat source field estimations

Hervé Louche , Vincent Delobelle , Denis Favier
Photomechanics 2011, Feb 2011, Belgium
Communication dans un congrès hal-00809159v1

A new approach to estimate heat fields during stress or temperature induced phase transformation on a NiTi SMA - Experimental validation

Vincent Delobelle , Hervé Louche , Denis Favier
International Conference on Shape Memory and Superelastic Technologies (SMST), Nov 2011, Hong Kong SAR China
Communication dans un congrès hal-00811423v1
Image document

Déformation en flexion d'une aiguille médicale dans les tissus mous

Thierry Alonso , Grégory Chagnon , Denis Favier
Mecamat, Jan 2010, Aussois, France
Communication dans un congrès hal-01978918v1

Analyse complète du bulge test grâce aux mesures 3D des champs de déplacements par stéréo-corrélation

Guilherme Machado , Grégory Chagnon , Denis Favier
Journée thématique sur la Caractérisation Mécanique des Elastomères 2010, Jun 2010, Clermont-Ferrand, France
Communication dans un congrès hal-01875146v1
Image document

Anisotropy of the Mullins effect in particle-reinforced silicone rubber

Guilherme Machado , Grégory Chagnon , Denis Favier
Mecamat, Jan 2010, Aussois, France
Communication dans un congrès hal-01978916v1
Image document

A multiscale approach to model the mechanical behaviour of heterogeneous hyperelastic membranes

Luc Meunier , Laurent Orgéas , Grégory Chagnon , Denis Favier
Sixth European conference on constitutive models for rubber, Sep 2009, Dresde, Germany. pp.429-434
Communication dans un congrès hal-01395961v1
Image document

Thermomechanical modelling of cold drawing processes of small diameter tubes

Muriel Palengat , Pierre Latil , Grégory Chagnon , Denis Favier , Hervé Louche
7th EUROMECH - Solid Mechanics Conference, 2009, Lisbonne, Portugal
Communication dans un congrès hal-01875152v1

Thermomechanical modelling of cold drawing processes of Co-Cr small diameter tubes

Muriel Palengat , Grégory Chagnon , Denis Favier , Christelle Plaideau
Materials & Processes for Medical Devices Conference, 2009, Minneapolis, United States
Communication dans un congrès hal-01875149v1

Membranes élastomères anisotropie contrôlée par le design de microstructures locales. Applications à des muscles artificiels.

Luc Meunier , Grégory Chagnon , Denis Favier , Laurent Orgéas , Pierre Vacher
forum d'innovations - Matériaux, Nouveaux Concepts, Apr 2009, Le Bourget du Lac, France
Communication dans un congrès hal-01986514v1
Image document

Microtomographie à rayons X et essais d'extraction pour caractériser les contacts fibre-fibre dans des composites à fibres courtes lors de leur mise en forme = X-ray microtomography and pull-out test to characterise fibre-fibre contacts in short fibre-reinforced composites during their processing

Olivier Guiraud , Laurent Orgéas , Pierre J.J. Dumont , Denis Favier
JNC 16, Jun 2009, Toulouse, France. 10 p
Communication dans un congrès hal-00394723v1

Experimental Observation of Induced Anisotropy of the Mullins effect in particle-reinforced silicone rubber

Guilherme Machado , Grégory Chagnon , Denis Favier
HETMAT, 2009, Budapest, Hungary
Communication dans un congrès hal-01875148v1
Image document

Experimental observation of induced anisotropy of the Mullins effect in particle-reinforced silicone rubber

Guilherme Machado , Grégory Chagnon , Denis Favier
SIXTH EUROPEAN CONFERENCE ON CONSTITUTIVE MODELS FOR RUBBER, Sep 2009, Dresde, Germany. pp.511-515
Communication dans un congrès hal-01395960v1

Is the tensile test relevant to characterize NiTi shape memory alloy behaviour?

Pauline Schlosser , Denis Favier , Hervé Louche , Laurent Orgéas , Yehan Liu
Int. Conference for Shape Memory and Superelastic Technologies (SMST), Sep 2008, Stresa, Italy
Communication dans un congrès hal-00344267v1

Modélisation et simulation de la rhéologie de suspensions de fibres concentrées modèles lors de leur mise en forme

Pierre J.J. Dumont , D. Favier , O. Guiraud , Laurent Orgéas , J.P. Vassal
Colloque National MECAMAT, Jan 2008, Aussois, France
Communication dans un congrès hal-00507341v1

Rhéologie de suspensions modèles transparentes et très concentrées de fibres. Analyse par un rhéomètre transparent de compression en déformation plane

Pierre J.J. Dumont , D. Favier , O. Guiraud , Laurent Orgéas , J.P. Vassal
Rhéologie et Thermodynamique. 43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. pp.41-44
Communication dans un congrès hal-00455015v1

Conduction in composites with highly conductive short fibres: comparison between experiments, discrete element simulation and analytical solution

Pierre J.J. Dumont , D. Favier , V. Michaud , Laurent Orgéas , J.P. Vassal
ECCM 13 Conference, Jun 2008, Stockholm, Sweden. Paper n° 2012
Communication dans un congrès hal-00454996v1

Experimental study of segregation phenomena during compression of glass mat thermoplastics (GMT)

Pierre J.J. Dumont , D. Favier , V. Michaud , Laurent Orgéas
9th International Conference on Flow Processes in Composite Materials (FPCM9), Jul 2008, Montréal, Canada
Communication dans un congrès hal-00449656v1
Image document

Détermination du coefficient de frottement par analyse inverse pour l'étirage de tube

Muriel Palengat , Olivier Guiraud , Christophe Millet , Grégory Chagnon , Denis Favier
Mecmat, Jan 2008, Aussois, France
Communication dans un congrès hal-01978986v1

Modélisation de l'écoulement et des évolutions de microstructures des suspensions très concentrées de fibres

Pierre J.J. Dumont , D. Favier , Laurent Orgéas , S. Le Corre
Rhéologie et Thermodynamique. 43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. pp.45-48
Communication dans un congrès hal-00455009v1

Temperature full-field measurement and heat sources estimation during superelastic tests of NiTi samples

Pauline Schlosser , Hervé Louche , Denis Favier , Laurent Orgéas
Int. Conference for Shape Memory and Superelastic Technologies (SMST), Sep 2008, Stresa, Italy
Communication dans un congrès hal-00344275v1

Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements

Pauline Schlosser , Denis Favier , Hervé Louche , Laurent Orgéas
3st Int. Conf. Smart Materials structure systems (CIMTEC 2008), Invited speaker, Jun 2008, France
Communication dans un congrès hal-00344254v1

Elastohysteresis: an accurate phenomenological model for pseudoelasticity and ferroelasticity 3d simulation of shape memory alloys under complex loadings

Gérard Rio , D. Favier , Yehan Liu
International Conference on Shape Memory and Superelastic Technologies, 2008, Stresa, Italy
Communication dans un congrès hal-00404088v1

Segretation phenomena between the polymer matrix and the fibrous reinforcement of glass mat thermoplastics (GMT) during compression moulding

Pierre J.J. Dumont , D. Favier , V. Michaud , Laurent Orgéas
ESAFORM Conference, Apr 2008, Lyon, France
Communication dans un congrès hal-00453418v1

Modelling and simulation of the rheology of bulk moulding compounds (BMC) during mould filling

Pierre J.J. Dumont , D. Favier , T.H. Le , Laurent Orgéas , O. Guiraud
ECCM 13 Conference, Jun 2008, Stockholm, Sweden. Paper n° 1611
Communication dans un congrès hal-00449661v1

Rheology of bulk moulding compounds

Pierre J.J. Dumont , D. Favier , T.H. Le , L. Orgeas , C. Venet
4th Annual European Rheology Conference (AERC), Apr 2007, Naples, Italy
Communication dans un congrès hal-00292820v1
Image document

Tube Drawing Process Modelling By A Finite Element Analysis

Muriel Palengat , Grégory Chagnon , Christophe Millet , Denis Favier
9th international conference on numerical methods in industrial forming processes, Jun 2007, Porto, Portugal
Communication dans un congrès hal-01978983v1
Image document

Experimental and Numerical Study of the Mechanical Behaviour of an Unfilled Silicone Rubber

Luc Meunier , Grégory Chagnon , Denis Favier , Laurent Orgéas
5th European Conference on Constitutive Models for Rubber, ECCMR 2007, Sep 2007, Paris, France
Communication dans un congrès hal-01978981v1

Characterization of the fibrous microstructure of SMC during compression moulding using X-ray microtomography

Pierre J.J. Dumont , D. Favier , T.H. Le , L. Orgeas , L. Salvo
16th International Conference on Composite Materials (ICCM), Jul 2007, Kyoto, Japan
Communication dans un congrès hal-00292828v1

Physical mechanisms of the deformation of a polycrystalline Ni-Ti thin tube under tension studied through full-field measurements

Denis Favier , Hervé Louche , Pauline Schlosser , Laurent Orgéas
McMat 2007, ASME Applied Mechanics and Materials Conference, Jun 2007, Austin, United States
Communication dans un congrès hal-00344241v1
Image document

Modélisation de l'étirage à froid de tubes par analyse éléments-finis

Muriel Palengat , Grégory Chagnon , Christophe Millet , Denis Favier
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-01978980v1
Image document

Tube Drawing Process Modelling By A Finite Element Analysis

Muriel Palengat , Olivier Guiraud , Christophe Millet , Grégory Chagnon , Denis Favier
Materials & Processes for Medical Devices Conference, Sep 2007, Palm Desert, CA, United States. pp.65-72
Communication dans un congrès hal-01978976v1

A transparent compression rheometer for studying flow-induced microstructures of transparent fibre suspensions

Pierre J.J. Dumont , D. Favier , L. Orgeas , J.P. Vassal
4th Annual European Rheology Conference (AERC), Apr 2007, Naples, Italy
Communication dans un congrès hal-00292824v1

Strain and thermal Heterogeneities analyse during superelastic deformation of polycrystalline NiTi tube

Pauline Schlosser , Denis Favier , Hervé Louche , Laurent Orgéas , P. Comte-Gaz
ASME Applied Mechanics and Materials Conference (McMat 2007), Jun 2007, Austin, United States
Communication dans un congrès hal-00344270v1
Image document

Caractérisation du comportement mécanique d’ élastomères silicones chargés et non chargés

Luc Meunier , Grégory Chagnon , Denis Favier , Laurent Orgéas
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-01978979v1

Osmotic motor : Osmotor

Grégory Chagnon , Philippe Cinquin , Anne Devin , Vanessa Durrieu , Denis Favier
Nanobio, 2006, Grenoble, France
Communication dans un congrès hal-01986567v1
Image document

Conductivité thermique des composites à fort contraste de phase : approche théorique et numérique

Jean-Pierre Vassal , Laurent Orgéas , Steven Le Corre , Denis Favier , Jean-Louis Auriault
MATERIAUX 2006: "Nano Mat - Tech : des NanoMatériaux aux NanoSystèmes.", Nov 2006, Dijon, France
Communication dans un congrès hal-01008016v1

Influence of thermomechanical treatment on the superelastic properties of a Ti-50.8%atNi shape memory alloy.

D. Favier , Yehan Liu , L. Orgeas , Arnaud Sandel , L. Debove
Euromat 2005, Sep 2005, République tchèque
Communication dans un congrès hal-00507190v1

Conception d'un joint osmotique pour stents

Vincent Gaudin , Philippe Cinquin , Denis Favier , Laurent Orgéas , Grégory Chagnon
1ères Journées de modélisation numérique en biomécanique, 2005, Saint Etienne, France
Communication dans un congrès hal-01875155v1

A micro-macro analysis of the evolution of fibre orientation in highly concentrated planar fibre suspensions

P. Dumont , Steven Le Corre , L. Orgeas , D. Favier
AERC 2005 2nd Annual European Rheology Conference, 2005, Grenoble, France
Communication dans un congrès hal-01007754v1
Image document

Transferts de chaleur par conduction dans les milieux fibreux

Jean-Pierre Vassal , Laurent Orgéas , Steven Le Corre , Denis Favier , Jean-Louis Auriault
7es Journées d'Étude sur les Milieux Poreux, Oct 2005, Pessac, France
Communication dans un congrès hal-01009064v1

Influence of thermomechanical treatment processes on the superelastic properties of a Ni-rich nitinol shape memory alloy

D. Favier , Yehan Liu , L. Orgeas , Arnaud Sandel , L. Debove
EMMC - Mecamat, May 2003, France
Communication dans un congrès hal-00507919v1
Image document

Influence of the liquid flow through the solid skeleton on the overall deformation of a material in semi-solid state

Jean-Christophe Gebelin , Christian Geindreau , Laurent Orgéas , Pascale Royer , Denis Favier
6th International Conference on the Semi-Solid Processing of Alloys and Composites , Sep 2000, Turin, Italy
Communication dans un congrès hal-01717372v1
Image document

Overall behaviour of a truss of fibers linked by viscous joints

Steven Le Corre , Denis Caillerie , Denis Favier , Laurent Orgéas
Composites for the millenium (FRC2000), 2000, Newcastle-upon-Tyne, United Kingdom. pp.303 - 310, ⟨10.1533/9780857093134.303⟩
Communication dans un congrès hal-01008641v1

Finite element simulation of the influence of heat treatment temperature on tension, compression and bending behavior of nanostructured NiTi wires

Gérard Rio , Denis Favier , Nathanaël Connesson , Thierry Alonso
The International Conference on Shape Memory and Superelastic Technologies, May 2019, Konstanz, Germany
Poster de conférence hal-02314554v1
Image document

Osmotic Motor: OSMOTOR

Grégory Chagnon , Philippe Cinquin , Anne Devin , Vanessa Durrieu , Denis Favier
Entretiens Jacques Cartier, Nanobiotechnologie pour l'analyse et la conversion d''énergie., 2006, Grenoble, France
Poster de conférence hal-01986563v1