Skip to Main content
Number of documents

170

Denis Favier- Univ. Grenoble Alpes- France


Journal articles60 documents

  • Estephanie Nobre Dantas Grassi, Grégory Chagnon, Henrique Ramos de Oliveira, Denis Favier. Anisotropy and Clausius-Clapeyron relation for forward and reverse stress-induced martensitic transformations in polycrystalline NiTi thin walled tubes. Mechanics of Materials, Elsevier, In press, ⟨10.1016/j.mechmat.2020.103392⟩. ⟨hal-02537803v2⟩
  • Henrique Ramos de Oliveira, Hervé Louche, Estephanie Nobre Dantas Grassi, Denis Favier. Specific forward/reverse latent heat and martensite fraction measurement during superelastic deformation of nanostructured NiTi wires. Materials Science and Engineering: A, Elsevier, 2020, 774, pp.138928. ⟨10.1016/j.msea.2020.138928⟩. ⟨hal-02470296⟩
  • Thierry Alonso, Denis Favier, Grégory Chagnon. Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis. Journal of Materials Engineering and Performance, Springer Verlag/ASM International, 2019, ⟨10.1007/s11665-019-04225-6⟩. ⟨hal-02195024⟩
  • Christopher Masri, Grégory Chagnon, Denis Favier, Hervé Sartelet, Edouard Girard. Experimental characterization and constitutive modeling of the biomechanical behavior of male human urethral tissues validated by histological observations. Biomechanics and Modeling in Mechanobiology, Springer Verlag, 2018, ⟨10.1007/s10237-018-1003-1⟩. ⟨hal-01807582⟩
  • Christopher Masri, Grégory Chagnon, Denis Favier. Influence of processing parameters on the macroscopic mechanical behavior of PVA hydrogels. Materials Science and Engineering: C, Elsevier, 2017, 75, pp.769-776. ⟨10.1016/j.msec.2017.02.045⟩. ⟨hal-01481365⟩
  • Nathanaël Connesson, Gabriel Antherieu, Denis Favier. A method to determine the shear and compressive stress-strain curves from torsion and bending tests of thin wires. Strain, Wiley-Blackwell, 2017, 53 (3), pp.e12227. ⟨hal-02005743⟩
  • Arthur Stricher, R.G. Rinaldi, Guilherme Machado, Grégory Chagnon, Denis Favier, et al.. Light-Induced Bulk Architecturation of PDMS Membranes. Macromolecular Materials and Engineering, Wiley-VCH Verlag, 2016, 301, pp.1151-1157. ⟨10.1002/mame.201600237⟩. ⟨hal-01399334⟩
  • Guilherme Machado, Arthur Stricher, Grégory Chagnon, Denis Favier. Mechanical behavior of architectured photosensitive silicone membranes: Experimental data and numerical analysis. Mechanics of Advanced Materials and Structures, Taylor & Francis, 2016, 24 (6), pp.524-533. ⟨10.1080/15376494.2016.1161096⟩. ⟨hal-01480538⟩
  • Quentin Breche, Grégory Chagnon, Guilherme Machado, Edouard Girard, Benjamin Nottelet, et al.. Mechanical behaviour'sevolution of a PLA-b-PEG-b-PLA triblock copolymer during hydrolytic degradation. Journal of the mechanical behavior of biomedical materials, Elsevier, 2016, 60, pp.288-300. ⟨10.1016/j.jmbbm.2016.02.015⟩. ⟨hal-01369301⟩
  • Quentin Breche, Grégory Chagnon, Guilherme Machado, Benjamin Nottelet, Xavier Garric, et al.. A non-linear viscoelastic model to describe the mechanical behavior's evolution of biodegradable polymers during hydrolytic degradation. Polymer Degradation and Stability, Elsevier, 2016, 131, pp.145-156. ⟨10.1016/j.polymdegradstab.2016.07.014⟩. ⟨hal-01369282⟩
  • Rémi Samuel, Edouard Girard, Grégory Chagnon, Stéphane Dejean, Denis Favier, et al.. Radiopaque poly(e-caprolactone) as additive for X-ray imaging of temporary implantable medical devices. RSC Advances, Royal Society of Chemistry, 2015, 5, pp.84125-84133. ⟨10.1039/c5ra19488a⟩. ⟨hal-01369275⟩
  • Vincent Delobelle, Denis Favier, Hervé Louche, Nathanael Connesson. Determination of Local Thermophysical Properties and Heat of Transition from Thermal Fields Measurement During Drop Calorimetric Experiment. Experimental Mechanics, Society for Experimental Mechanics, 2015, 55 (4), pp.711-723. ⟨10.1007/s11340-014-9877-z⟩. ⟨hal-01300519⟩
  • Marie Rebouah, Grégory Chagnon, Denis Favier. Development and modeling of filled silicone architectured membranes. Meccanica, Springer Verlag, 2015, 50 (1), pp.11-24. ⟨10.1007/s11012-014-0065-0⟩. ⟨hal-01480381⟩
  • Grégory Chagnon, Marie Rebouah, Denis Favier. Hyperelastic Energy Densities for Soft Biological Tissues: A Review. Journal of Elasticity, Springer Verlag, 2015, 120 (2), pp.129-160. ⟨10.1007/s10659-014-9508-z⟩. ⟨hal-01480510⟩
  • Guilherme Machado, Hervé Louche, Thierry Alonso, Denis Favier. Superelastic cellular NiTi tube-based materials: Fabrication, experiments and modeling. Materials and Design, Elsevier, 2015, 65, pp.212-220. ⟨10.1016/j.matdes.2014.09.007⟩. ⟨hal-01285370⟩
  • Luc Meunier, Grégory Chagnon, Denis Favier, Laurent Orgéas. Anisotropic large deformation of geometrically architectured unfilled silicone membranes. European Journal of Mechanics - A/Solids, Elsevier, 2015, 50, pp.87-99. ⟨10.1016/j.euromechsol.2014.11.002⟩. ⟨hal-01480397⟩
  • Vincent Delobelle, Grégory Chagnon, Denis Favier, Thierry Alonso. Study of electropulse heat treatment of cold worked NiTi wire: From uniform to localised tensile behaviour. Journal of Materials Processing Technology, Elsevier, 2015, 227, pp.244-250. ⟨10.1016/j.jmatprotec.2015.08.011⟩. ⟨hal-01480523⟩
  • Vincent Delobelle, Hervé Louche, D Favier. Numerical study on the effect of the paint layer used for infrared thermography on heat source estimation. Quantitative InfraRed Thermography Journal, Taylor and Francis, 2014, 11 (2), pp.233-249. ⟨10.1080/17686733.2014.971618⟩. ⟨hal-01280470⟩
  • Thierry Rey, Florence Razan, Eric Robin, Sylvain Faure, Jean-Benoît Le Cam, et al.. Mechanical characterization and comparison of different NiTi/silicone rubber interfaces. International Journal of Adhesion and Adhesives, Elsevier, 2014, 48, pp.67-74. ⟨10.1016/j.ijadhadh.2013.09.028⟩. ⟨hal-00963798⟩
  • Petr Šittner, Ludek Heller, Jan Pilch, Caroline Curfs, Thierry Alonso, et al.. Young’s Modulus of Austenite and Martensite Phases in Superelastic NiTi Wires. Journal of Materials Engineering and Performance, Springer Verlag/ASM International, 2014, 23 (7), pp.2303-2314. ⟨10.1007/s11665-014-0976-x⟩. ⟨hal-02022634⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Theory and identification of a constitutive model of induced anisotropy by the Mullins effect. Journal of the Mechanics and Physics of Solids, Elsevier, 2014, 63, pp.29-39. ⟨10.1016/j.jmps.2013.10.008⟩. ⟨hal-00958608⟩
  • Thierry Rey, Grégory Chagnon, Denis Favier, Jean-Benoit Le Cam. Hyperelasticity with rate-independent microsphere hysteresis model for rubberlike materials. Computational Materials Science, Elsevier, 2014, 90, pp.89-98. ⟨10.1016/j.commatsci.2014.03.068⟩. ⟨hal-01063253⟩
  • Gabriel Antherieu, Nathanaël Connesson, Yohan Payan, Denis Favier, Pierre Mozer. NiTi based stent for the treatment of acute urinary retention due to benign prostatic hyperplasia: a preliminary study on NiTi wires and tubes under pure bending. Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 2014, 17, pp.190 - 191. ⟨10.1080/10255842.2014.931679⟩. ⟨hal-01108621⟩
  • Camille Linardon, Denis Favier, Grégory Chagnon, Benoit Gruez. A conical mandrel tube drawing test designed to assess failure criteria. Journal of Materials Processing Technology, Elsevier, 2014, pp.347-357. ⟨hal-00936544⟩
  • Muriel Palengat, Grégory Chagnon, Denis Favier, Hervé Louche, Camille Linardon, et al.. Cold drawing of 316L stainless steel thin-walled tubes: experiments and finite element analysis. International Journal of Mechanical Sciences, Elsevier, 2013, 70, pp.69-78. ⟨10.1016/j.ijmecsci.2013.02.003⟩. ⟨hal-00936527⟩
  • Marie Rebouah, Guilherme Machado, Grégory Chagnon, Denis Favier. Anisotropic Mullins stress softening of a deformed silicone holey plate. Mechanics Research Communications, Elsevier, 2013, 49, pp.36-43. ⟨hal-01974917⟩
  • Vincent Delobelle, Denis Favier, Hervé Louche. Heat Estimation from Infrared Measurement Compared to DSC for Austenite to R Phase Transformation in a NiTi Alloy. Journal of Materials Engineering and Performance, Springer Verlag/ASM International, 2013, 22 (6), pp.1688-1693. ⟨10.1007/s11665-012-0466-y⟩. ⟨hal-01300481⟩
  • Thierry Rey, G. Chagnon, Jean-Benoit Le Cam, Denis Favier. Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers. Polymer Testing, Elsevier, 2013, 32 (3), pp.492 - 501. ⟨10.1016/j.polymertesting.2013.01.008⟩. ⟨hal-01073891⟩
  • Vincent Delobelle, Patrick Delobelle, Yehan Liu, D. Favier, Hervé Louche. Resistance welding of NiTi shape memory alloy tubes. Journal of Materials Processing Technology, Elsevier, 2013, 213, pp.1139-1145. ⟨10.1016/j.jmatprotec.2013.01.013⟩. ⟨hal-00835925⟩
  • Guilherme Machado, Denis Favier, Grégory Chagnon. Membrane Curvatures and Stress-strain Full Fields of Axisymmetric Bulge Tests from 3D-DIC Measurements. Theory and Validation on Virtual and Experimental results. Experimental Mechanics, Society for Experimental Mechanics, 2012, 52 (7), pp.865-880. ⟨10.1007/s11340-011-9571-3⟩. ⟨hal-01974147⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Induced anisotropy by the Mullins effect in filled silicone rubber. Mechanics of Materials, Elsevier, 2012, 50, pp.70-80. ⟨10.1016/j.mechmat.2012.03.006⟩. ⟨hal-01974831⟩
  • Hervé Louche, Pauline Schlosser, Denis Favier, Laurent Orgéas. Heat Source Processing for Localized Deformation With Non-Constant Thermal Conductivity. Application to Superelastic Tensile Tests of NiTi Shape Memory Alloys. Experimental Mechanics, Society for Experimental Mechanics, 2012, 52 (9), pp.1313-1328. ⟨10.1007/s11340-012-9607-3⟩. ⟨hal-00787054⟩
  • Grégory Chagnon, Vincent Gaudin, Denis Favier, Laurent Orgéas, Philippe Cinquin. An osmotically inflatable seal to treat endoleaks of type 1, following endovascular aneurysm repair. Journal of Mechanics in Medicine and Biology, World Scientific Publishing, 2012, 12 (4), pp.1250070. ⟨10.1142/S0219519412004958⟩. ⟨hal-01974834⟩
  • Vincent Grolleau, Hervé Louche, Vincent Delobelle, A. Penin, Gérard Rio, et al.. Assessment of tension-compression asymmetry of NiTi using circular bulge testing of thin plates. Scripta Materialia, Elsevier, 2011, 65 (4), pp.347-350. ⟨10.1016/j.scriptamat.2011.05.003⟩. ⟨hal-00757982⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Analysis of the isotropic models of the Mullins effect based on filled silicone rubber experimental results. Mechanics of Materials, Elsevier, 2010, 42 (9), pp.841-851. ⟨10.1016/j.mechmat.2010.07.001⟩. ⟨hal-01974135⟩
  • Pierre J.J. Dumont, D. Favier, S. Le Corre, Laurent Orgéas. A numerical analysis of the evolution of bundle orientation in concentrated fibre-bundle suspensions. Journal of Non-Newtonian Fluid Mechanics, Elsevier, 2009, 160, pp.76-92. ⟨hal-00511761⟩
  • Pierre J.J. Dumont, Steven Le Corre, Laurent Orgéas, Denis Favier. A numerical analysis of the evolution of bundle orientation in concentrated fibre-bundle suspensions. Journal of Non-Newtonian Fluid Mechanics, Elsevier, 2009, 160 (2-3), pp.76-92. ⟨10.1016/j.jnnfm.2009.03.001⟩. ⟨hal-01004927⟩
  • Pierre J.J. Dumont, D. Favier, T.H. Le, Laurent Orgéas. Lubricated compression of BMC, a concentrated and fibre-reinforced granular polymer suspension. Rheologica Acta, Springer Verlag, 2008, 47 (5-6), pp.677-688. ⟨hal-00449005⟩
  • Pauline Schlosser, Denis Favier, Hervé Louche, Laurent Orgéas. Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements. Advances in Science and Technology, 2008, 59, pp.140-149. ⟨10.4028/3-908158-16-8.140⟩. ⟨hal-00336736⟩
  • Luc Meunier, Grégory Chagnon, Denis Favier, Laurent Orgéas, Pierre Vacher. Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber. Polymer Testing, Elsevier, 2008, 27, pp.765-777. ⟨10.1016/j.polymertesting.2008.05.011⟩. ⟨hal-00328231⟩
  • Thaihung Le, Pierre J.J. Dumont, L. Orgéas, D. Favier, Luc Salvo, et al.. X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites. Composites Part A: Applied Science and Manufacturing, Elsevier, 2008, 39, pp.91-103. ⟨10.1016/j.compositesa.2007.08.027⟩. ⟨hal-00374957⟩
  • Pierre J.J. Dumont, D. Favier, J.A.E. Manson, L. Orgeas, J.P. Vassal, et al.. Processing, characterization and rheology of transparent concentrated fibre-bundle suspensions. Rheologica Acta, Springer Verlag, 2007, 46 (5), pp.639-651. ⟨hal-00292089⟩
  • Pauline Schlosser, Hervé Louche, Denis Favier, Laurent Orgéas. Image processing to estimate the heat sources related to phase transformations durint tensile test of NiTi tubes. Strain, Wiley-Blackwell, 2007, 43, pp.260-271. ⟨10.1111/j.1475-1305.2007.00350.x⟩. ⟨hal-00180898⟩
  • Pierre J.J. Dumont, L. Orgeas, D. Favier, P. Pizette, C. Venet. Compression moulding of SMC : in situ experiments, modelling and simulation. Composites Part A: Applied Science and Manufacturing, Elsevier, 2007, 38A (2), pp.353-368. ⟨hal-00292081⟩
  • Denis Favier, Hervé Louche, Pauline Schlosser, Laurent Orgéas, Pierre Vacher, et al.. Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8 at% Ni thin tube under tension. Investigation via temperature and strain fields measurements. Acta Materialia, Elsevier, 2007, 55 (16), pp.5310-5322. ⟨10.1016/j.actamat.2007.05.027⟩. ⟨hal-00336739⟩
  • D. Favier, Yehan Liu, L. Orgeas, Arnaud Sandel, L. Debove, et al.. Influence of thermomechanical processing on the superelastic properties of a Ni-rich nitinol shape memory alloy. Materials Science and Engineering: A, Elsevier, 2006, pp.130-136. ⟨hal-00383401⟩
  • Steven Le Corre, Pierre J.J. Dumont, Laurent Orgéas, Denis Favier. Une approche multi-échelle de la rhéologie des suspensions concentrées de fibres. Revue des composites et des matériaux avancés, Lavoisier, 2005, 15 (3), pp.355-369. ⟨hal-01007422⟩
  • Steven Le Corre, Denis Caillerie, Laurent Orgéas, Denis Favier. Behaviour of a net of fibers linked by viscous interactions: theory and mechanical properties. Journal of the Mechanics and Physics of Solids, Elsevier, 2004, 52 (2), pp.395-421. ⟨10.1016/S0022-5096(03)00090-5⟩. ⟨hal-01005308⟩
  • L. Orgeas, Alexandre Vivet, D. Favier, Christian Lexcellent, Yehan Liu. Hysteretic behavior of a CuZnAl single crystal during super elastic shear deformation. Scripta Materialia, Elsevier, 2004, 51, pp. 297-302. ⟨hal-00019772⟩
  • Steven Le Corre, Denis Caillerie, Laurent Orgéas, Denis Favier. Behavior of a net of fibers linked by viscous interactions: theory and mechanical properties. Journal of the Mechanics and Physics of Solids, Elsevier, 2004, 52 (2), pp.395-421. ⟨10.1016/S0022-5096(03)00090-5⟩. ⟨hal-00531571⟩
  • Pierre J.J. Dumont, Laurent Orgéas, Steven Le Corre, Denis Favier. Anisotropic viscous behavior of sheet molding compounds (SMC) during compression molding. International Journal of Plasticity, Elsevier, 2003, 19 (5), pp.625-646. ⟨10.1016/S0749-6419(01)00077-8⟩. ⟨hal-01005261⟩
  • Pierre J.J. Dumont, Steven Le Corre, Laurent Orgeas, Denis Favier. Un modèle biphasique pour simuler la mise en forme par compression des composites à fibres courtes. Revue des composites et des matériaux avancés, Lavoisier, 2002, 12 (3), pp.477-497. ⟨10.3166/rcma.12.477-497⟩. ⟨hal-01007421⟩
  • Steven Lecorre, Laurent Orgéas, Denis Favier, Ali Tourabi, Abderrahim Maazouz, et al.. Shear and compression behaviour of sheet moulding compounds. Composites Science and Technology, Elsevier, 2002, 62 (4), pp.571 - 577. ⟨10.1016/S0266-3538(01)00151-8⟩. ⟨hal-01007302⟩
  • L. Orgéas, Yehan Liu, D. Favier. Experimental Study of Mechanical Hysteresis of NiTi During Ferroelastic and Superelastic Deformation. Journal de Physique IV Colloque, 1997, 07 (C5), pp.C5-477-C5-482. ⟨10.1051/jp4:1997575⟩. ⟨jpa-00255675⟩
  • P. Manach, D. Favier, G. Rio. Finite Element Simulations of Internal Stresses Generated During the Ferroelastic Deformation of NiTi Bodies. Journal de Physique IV Colloque, 1996, 06 (C1), pp.C1-235-C1-244. ⟨10.1051/jp4:1996123⟩. ⟨jpa-00254155⟩
  • G. Rio, D. Favier, H. Desplats. Finite Elements Simulation of Mechanical Behaviour of Shape Memory Alloys Coupled with a Non-Stationary Thermal Field. Journal de Physique IV Colloque, 1995, 05 (C8), pp.C8-215-C8-220. ⟨10.1051/jp4:1995829⟩. ⟨jpa-00254078⟩
  • D. Favier, Yehan Liu, P. Manach. Influence of Prior Thermomechanical Treatment on the Training Behaviour of a NiTi Alloy. Journal de Physique IV Colloque, 1995, 05 (C2), pp.C2-391-C2-396. ⟨10.1051/jp4:1995260⟩. ⟨jpa-00253645⟩
  • L. Orgeas, D. Favier. Application of the Beam Theory to Model the Pseudoelastic and Ferroelastic Bending of SMA Beams. Journal de Physique IV Colloque, 1995, 05 (C2), pp.C2-519-C2-524. ⟨10.1051/jp4:1995280⟩. ⟨jpa-00253666⟩
  • Gérard Rio, Pierre-Yves Manach, Denis Favier. Finite element simulation of 3D mechanical behaviour of NiTi shape memory alloys. Archives of Mechanics, 1995, 47 (3), pp.537-556. ⟨hal-00648791⟩
  • P. Manach, D. Favier. EXPERIMENTAL STUDY FOR THE IDENTIFICATION OF A TENSORIAL SCHEME FOR SHAPE MEMORY ALLOYS. Journal de Physique IV Colloque, 1991, 01 (C4), pp.C4-415-C4-420. ⟨10.1051/jp4:1991462⟩. ⟨jpa-00250616⟩

Conference papers101 documents

  • Thierry Alonso, Denis Favier, Nathanaël Connesson. An experimental set-up to perform uniform tensile tests of superelastic NiTi tubes or wires. International Conference on Shape Memory and Superelastic Technologies (SMST), May 2019, Konstanz, Germany. ⟨hal-02133239⟩
  • Nathanaël Connesson, Gabriel Antherieu, Thierry Alonso, Denis Favier. Influence Of Heat Treatment Temperature On Tension, Compression And Bending Behavior Of Nanostructured NiTi Wires. The International Conference on Shape Memory and Superelastic Technologies, May 2019, Konstanz, Germany. ⟨hal-02314555⟩
  • Estephanie Grassi, Denis Favier, Grégory Chagnon. Influence of anisotropy on strain localization phenomenon in tension of superelastic NiTi thin walled tubes. European Symposium on Martensitic Transformations, Aug 2018, Metz, France. ⟨hal-01872343⟩
  • Nathanaël Connesson, Gabriel Antherieu, Denis Favier. Method to extract Stress-Strain functions from pure torsion/bending experimental tests. EMMC16 16th European Mechanics of Materials Conference, Mar 2018, Nantes, France. ⟨hal-02006079⟩
  • Estephanie Grassi, Denis Favier, Grégory Chagnon. Anisotropy and temperature dependence of superelastic behavior of NiTi shape memory alloy thin walled tubes. 10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy. ⟨hal-01872398⟩
  • Henrique Martinni Ramos de Oliveira, Hervé Louche, Denis Favier. Thermomechanical analysis of the deformation in tension of a nanocrystalline superelastic NiTi thin wire. 10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy. ⟨hal-01816031⟩
  • Estephanie Grassi, Denis Favier, Grégory Chagnon. Anisotropic tensile behavior of NiTi Tubes and its dependence on temperature experimental results. International Conference on Shape Memory and Superelastic Technologies (SMST), May 2017, San Diego, United States. ⟨hal-01872416⟩
  • Thierry Alonso, Denis Favier, Grégory Chagnon. How the evolution of the dynamic elastic modulus during isothermal tensile tests can bring new information on mechanisms deformation of a NiTi superelastic wire. International Conference on Shape Memory and Superelastic Technologies (SMST), May 2017, San Diego, United States. ⟨hal-01872409⟩
  • Grégory Chagnon, Denis Favier, Luc Meunier, Guilherme Machado, Marie Rebouah, et al.. Lois hyper-viscoélastiques anisotropes des élastomères architecturès aux tissus du vivant. Groupe de travail Mécanique des Polymères, Mar 2016, Paris, France. ⟨hal-01986502⟩
  • Nathanaël Connesson, Gabriel Antherieu, Denis Favier. METHOD TO EXTRACT STRESS-STRAIN FUNCTIONS FROM PURE TORSION OR PURE BENDING EXPERIMENTAL TESTS. 17th International Conference on Experimental Mechanics (ICEM17), Jul 2016, Rhodes, Greece. ⟨hal-02006055⟩
  • Estephanie Grassi, Denis Favier, Grégory Chagnon. Anisotropic thermomechanical properties of a superelastic Nickel-Titane thin tube. 15th European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium. ⟨hal-01872428⟩
  • Christopher Masri, Grégory Chagnon, Denis Favier, Edouard Girard. Caractérisation mécanique In Vitro de tissus mous. MECAMAT 2016, Jan 2016, Aussois, France. ⟨hal-01807463⟩
  • Quentin Breche, Edouard Girard, Guilherme Machado, Grégory Chagnon, Denis Favier, et al.. Modelling of mechanical properties of a PLA-b-PEG-b-PLA biodegradable triblock copolymer during hydrolytic degradation. European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium. ⟨hal-01872434⟩
  • Henrique Ramos de Oliveira, Hervé Louche, Denis Favier. Internal heat sources and transformation enthalpy of a nanostructured superelastic NiTi wire. EMMC15, Sep 2016, Bruxelles, Belgium. ⟨hal-01772389⟩
  • Christopher Masri, Grégory Chagnon, Denis Favier. Experimental investigation of anisotropic mechanical behavior of ex vivo human urethral tissues. 15th European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium. ⟨hal-01872440⟩
  • Marie Rebouah, Grégory Chagnon, Denis Favier. Elaboration, modélisation et simulation de membranes architecturées. 22e Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01807467⟩
  • Grégory Chagnon, Guilherme Machado, Denis Favier. Use of digital image correlation to analyse a membrane bulge test. Flexible Materials and Large Deformations, May 2015, Rennes, France. ⟨hal-01986504⟩
  • Grégory Chagnon, Guilherme Machado, Marie Rebouah, Thierry Rey, Denis Favier. Modeling of mechanical properties of silicone elastomers. 10th International Workshop on Silicon-Based Polymers, Apr 2015, Aussois, France. ⟨hal-01986507⟩
  • Nathanaël Connesson, François Tissot, Denis Favier, Ludek Heller. Biaxial testing of Knitted NiTi textiles: adapted image processing vs DIC. Photomechanics 2015, May 2015, Delf, Netherlands. ⟨hal-02006098⟩
  • Christopher Masri, Géraldine Penven, Grégory Chagnon, Denis Favier. Caractérisation et modélisation de polymères PVA. 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01872446⟩
  • Quentin Breche, Edouard Girard, Benjamin Nottelet, Xavier Garric, Guilherme Machado, et al.. Evolution du comportement viscoélastique de copolymères triblocs PLA-PEG-PLA au cours de la dégradation par hydrolyse. 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01872452⟩
  • Grégory Chagnon, Arthur Stricher, Guilherme Machado, R.G. Rinaldi, François Ganachaud, et al.. Development and characterization of architectured silicone membranes. 9th European Solid Mechanics Conference (ESMC 2015), Jul 2015, Madrid, Spain. ⟨hal-01872476⟩
  • Grégory Chagnon, Marie Rebouah, Denis Favier. Développement et modélisation de membranes silicones architecturées. 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France. ⟨hal-01514292⟩
  • Guilherme Machado, Arthur Stricher, R.G. Rinaldi, François Ganachaud, Denis Favier, et al.. Développement et caractérisation mécanique de membranes silicone architecturées. 3ème Journée Thématique sur la caractérisation mécanique des élastomères : nouvelles approches, Sep 2014, Nantes, France. ⟨hal-01079792⟩
  • Thierry Rey, Jean-Benoit Le Cam, Grégory Chagnon, Denis Favier. Etude de l'interface NiTi/silicone. 3e journée thématique sur la caractérisation mécanique des élastomères : nouvelles approches, Sep 2014, Nantes, France. ⟨hal-01079804⟩
  • Denis Favier, Thierry Alonso, Gabriel Antherieu, Grégory Chagnon, Nathanaël Connesson, et al.. Alliages à mémoire de forme Nickel-Titane architecturés et à gradient. Applications médicales. Entretiens Jacques Cartier, Oct 2014, Montréal, Canada. ⟨hal-01872510⟩
  • Gabriel Antherieu, Yohan Payan, Denis Favier, Nathanaël Connesson, Pierre Mozer. An innovative NiTi based stent as an emergency treatment for acute urinary retention in case of benign prostatic hyperplasia. Surgetica 2014, 2014, Chambéry, France. ⟨hal-01092754⟩
  • Nathanaël Connesson, Grégory Chagnon, Denis Favier, Thierry Alonso, Quentin Breche, et al.. Multimaterials and Architectured Materials for Medical Applications. Architectured Biomaterials, Medical and Tissue Engineering, Dec 2014, Berlin, Germany. ⟨hal-01872503⟩
  • Marie Rebouah, Grégory Chagnon, Denis Favier. Development of constitutive equation of filled silicone architectured membrane. 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.431-435. ⟨hal-00936541⟩
  • Marie Rebouah, Grégory Chagnon, Denis Favier. Anisotropic modeling of the Mullins effect and the residual strain of filled silicone rubber. 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.431-435. ⟨hal-00936540⟩
  • Guilherme Machado, Marie Rebouah, Grégory Chagnon, Denis Favier. Modélisation de l'adoucissement anisotrope dans le comportement hyperélastique des milieux du vivant. GDR Mécanotransduction, Sep 2013, Grenoble, France. ⟨hal-01872528⟩
  • Nathanaël Connesson, Grégory Chagnon, Denis Favier, Thierry Alonso, Marie Rebouah, et al.. Architectured biomaterials for medical devices. Architectured biomaterials for medical devices, Sep 2013, Grenoble, France. ⟨hal-01872546⟩
  • Thierry Alonso, Denis Favier, Grégory Chagnon, Petr Sittner, Liu Yinong. Dynamic Mechanical Spectroscopy of Nanograined Thin NiTi Wires. The International Conference on Shape Memory and Superelastic Technologies (SMST), May 2013, Prague, Czech Republic. ⟨hal-01872585⟩
  • Thierry Alonso, Denis Favier, Grégory Chagnon. Etude du comportement thermomécanique d'un fil fin de NiTi par spectromètre dynamique mécanique et thermique. 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. pp.1-6. ⟨hal-00963807⟩
  • Camille Linardon, Denis Favier, Grégory Chagnon, Benoit Gruez. Design of specific experimental tests to evaluate formability prediction of cold drawing CoCr Tubes. Plasticity, Jan 2013, Nassau, Bahamas. ⟨hal-01978923⟩
  • Vincent Delobelle, Denis Favier, Hervé Louche, N. Connesson. An original method to estimate local thermophysical properties and latent heat from Thermal Field Measurement (TFM). PhotoMechanics Conference, May 2013, Montpellier, France. pp.149-151. ⟨hal-00942926⟩
  • Thierry Rey, Grégory Chagnon, Denis Favier, Jean-Benoit Le Cam. Modeling of hysteresis by means of a directional approach. Constitutive Models. 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sabastian, Spain. pp.107-110. ⟨hal-00936538⟩
  • Thierry Rey, Grégory Chagnon, Jean-Benoit Le Cam, Denis Favier. Effects of temperature on the mechanical behavior of filled and unfilled silicone rubbers. 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.511-514. ⟨hal-00936536⟩
  • François Tissot, Denis Favier, Nathanaël Connesson, Grégory Chagnon, Thierry Rey, et al.. FE Modeling of NiTi Elastomeric Composites for Use as Biomaterials. Shape Memory and Superelastic Technologies, May 2013, Prague, Czech Republic. ⟨hal-01872597⟩
  • Emmanuel Promayon, Vincent Luboz, Grégory Chagnon, Thierry Alonso, Denis Favier, et al.. Comparison of LASTIC (Light Aspiration device for in vivo Soft TIssue Characterization) with classic Tensile Tests.. Advanced experimental approaches and inverse problems in tissue biomechanics., 2012, Saint-Etienne, France. pp.75-76. ⟨hal-00705487⟩
  • Thierry Alonso, Denis Favier, Grégory Chagnon, Petr Sittner. Measurement by DMA in Tension of Elastic Moduli and Transformation Behaviour of fine Nitinol Medical Wires as function of Stress and Temperature. 8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria. ⟨hal-01875138⟩
  • Marie Rebouah, Grégory Chagnon, Denis Favier. Modelling of the behaviour of filled silicone architectured membrane. Archimat - Architectured Materials Workshop, Oct 2012, Prague, Czech Republic. ⟨hal-01875136⟩
  • Marie Rebouah, Guilherme Machado, Grégory Chagnon, Denis Favier. Validation d'un modèle anisotrope de l'effet Mullins par l'étude d'une plaque trouée en silicone chargé. 2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France. ⟨hal-01875143⟩
  • François Tissot, Thierry Rey, Ludek Heller, Nathanaël Connesson, Grégory Chagnon, et al.. Experiments and modeling of smart silicone elastomer membranes reinforced with shaped NiTi textiles. 8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria. ⟨hal-01875139⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Caractérisation de l’anisotropie de l’effet Mullins sur des essais non classiques. 2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France. ⟨hal-01875140⟩
  • Thierry Rey, Grégory Chagnon, Jean-Benoit Le Cam, Denis Favier. Influence de la température sur le comportement mécanique d' un élastomère silicone chargé. 2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France. ⟨hal-01875141⟩
  • Guilherme Machado, Marie Rebouah, Grégory Chagnon, Denis Favier. Modelling of the Induced Anisotropy by Mullins Effect. 8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria. ⟨hal-01875137⟩
  • Guilherme Machado, Hervé Louche, Denis Favier, Yehan Liu. Experimental characterization and modeling of the mechanical behavior of architectured tube-based NiTi materials. Archimat 2012, Oct 2012, Prague, Czech Republic. ⟨hal-00809144⟩
  • Denis Favier, Thierry Alonso, Grégory Chagnon, Vincent Delobelle, Hervé Louche, et al.. Mechanical behaviour of architectured NiTi materials in complex loading. CIMTEC, Jun 2012, Montecatini Terme, Italy. ⟨hal-00809087⟩
  • Christophe Cellard, Gérard Rio, Shariat Bashir S., Yinong Liu, Vincent Grolleau, et al.. EXPERIMENTAL AND NUMERICAL STUDY OF NITI HOLEY PLATES LOADED IN TENSION. ESOMAT 2012, Sep 2012, Sankt Peterburg, Russia. ⟨hal-00761157⟩
  • Vincent Luboz, Emmanuel Promayon, Grégory Chagnon, Thierry Alonso, Christine Barthod, et al.. Validation de LASTIC (Light Aspiration device for in vivo Soft TIssue Characterization) sur des élastomères. 2e Journée thématique sur la caractérisation mécanique des élastomères, May 2012, Grenoble, France. pp.1. ⟨hal-00739433⟩
  • Grégory Chagnon, Guilherme Machado, Denis Favier. Anisotropy of the Mullins effect in particle-reinforced silicone rubber. Archimat 2011, May 2011, Autrans, France. ⟨hal-01875145⟩
  • Vincent Delobelle, Hervé Louche, Denis Favier. A new approach to estimate heat fields during stress or temperature induced phase transformation on a NiTi SMA - Experimental validation. International Conference on Shape Memory and Superelastic Technologies (SMST), Nov 2011, Hong Kong SAR China. ⟨hal-00811423⟩
  • Vincent Delobelle, Denis Favier, Hervé Louche. Use of resistance welding to join NiTi SMAs tubes. Archimat 2011, May 2011, Grenoble, France. ⟨hal-00809256⟩
  • Guilherme Machado, Denis Favier, Grégory Chagnon. From the experimental determination of stress-strain full fields during a bulge test thanks to 3D-DIC technique to the characterization of anisotropic Mullins effect. 7th European Conference on Constitutive Models for Rubber, Sep 2011, Dublin, Ireland. ⟨hal-01978920⟩
  • Camille Linardon, Jean-Sébastien Affagard, Grégory Chagnon, Denis Favier, Benoit Gruez. Simulation of Drawing of Small Stainless Steel Platinum Medical Tubes-Influence of the Tool Parameters on the Forming Limit. THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011, Apr 2011, Belfast, Ireland. ⟨10.1063/1.3589553⟩. ⟨hal-01978919⟩
  • Vincent Delobelle, Denis Favier, Hervé Louche. Validation expérimentale d'estimations de sources de chaleur - Cas uniforme. CFM, Aug 2011, Besançon, France. ⟨hal-00813097⟩
  • Vincent Delobelle, Denis Favier, Hervé Louche. Determination of heat capacity and thermal conductivity of NiTi. International Conference on Martensitic Transformations (ICOMAT), Sep 2011, Osaka, Japan. ⟨hal-00811428⟩
  • Hervé Louche, Vincent Delobelle, Denis Favier. Experimental validation of heat source field estimations. Photomechanics 2011, Feb 2011, Belgium. ⟨hal-00809159⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Analyse complète du bulge test grâce aux mesures 3D des champs de déplacements par stéréo-corrélation. Journée thématique sur la Caractérisation Mécanique des Elastomères 2010, Jun 2010, Clermont-Ferrand, France. ⟨hal-01875146⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Anisotropy of the Mullins effect in particle-reinforced silicone rubber. Mecamat, Jan 2010, Aussois, France. ⟨hal-01978916⟩
  • Thierry Alonso, Grégory Chagnon, Denis Favier. Déformation en flexion d'une aiguille médicale dans les tissus mous. Mecamat, Jan 2010, Aussois, France. ⟨hal-01978918⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Experimental Observation of Induced Anisotropy of the Mullins effect in particle-reinforced silicone rubber. HETMAT, 2009, Budapest, Hungary. ⟨hal-01875148⟩
  • Muriel Palengat, Grégory Chagnon, Denis Favier, Christelle Plaideau. Thermomechanical modelling of cold drawing processes of Co-Cr small diameter tubes. Materials & Processes for Medical Devices Conference, 2009, Minneapolis, United States. ⟨hal-01875149⟩
  • Luc Meunier, Grégory Chagnon, Denis Favier, Laurent Orgéas, Pierre Vacher. Membranes élastomères anisotropie contrôlée par le design de microstructures locales. Applications à des muscles artificiels.. forum d'innovations - Matériaux, Nouveaux Concepts, Apr 2009, Le Bourget du Lac, France. ⟨hal-01986514⟩
  • Olivier Guiraud, Laurent Orgéas, Pierre J.J. Dumont, Denis Favier. Microtomographie à rayons X et essais d'extraction pour caractériser les contacts fibre-fibre dans des composites à fibres courtes lors de leur mise en forme = X-ray microtomography and pull-out test to characterise fibre-fibre contacts in short fibre-reinforced composites during their processing. JNC 16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00394723⟩
  • Muriel Palengat, Pierre Latil, Grégory Chagnon, Denis Favier, Hervé Louche, et al.. Thermomechanical modelling of cold drawing processes of small diameter tubes. 7th EUROMECH - Solid Mechanics Conference, 2009, Lisbonne, Portugal. ⟨hal-01875152⟩
  • Luc Meunier, Laurent Orgéas, Grégory Chagnon, Denis Favier. A multiscale approach to model the mechanical behaviour of heterogeneous hyperelastic membranes. Sixth European conference on constitutive models for rubber, Sep 2009, Dresde, Germany. pp.429-434. ⟨hal-01395961⟩
  • Guilherme Machado, Grégory Chagnon, Denis Favier. Experimental observation of induced anisotropy of the Mullins effect in particle-reinforced silicone rubber. SIXTH EUROPEAN CONFERENCE ON CONSTITUTIVE MODELS FOR RUBBER, Sep 2009, Dresde, Germany. pp.511-515. ⟨hal-01395960⟩
  • Gérard Rio, D. Favier, Yehan Liu. Elastohysteresis: an accurate phenomenological model for pseudoelasticity and ferroelasticity 3d simulation of shape memory alloys under complex loadings. International Conference on Shape Memory and Superelastic Technologies, 2008, Stresa, Italy. ⟨hal-00404088⟩
  • Pauline Schlosser, Hervé Louche, Denis Favier, Laurent Orgéas. Temperature full-field measurement and heat sources estimation during superelastic tests of NiTi samples. Int. Conference for Shape Memory and Superelastic Technologies (SMST), Sep 2008, Stresa, Italy. ⟨hal-00344275⟩
  • Pierre J.J. Dumont, D. Favier, V. Michaud, Laurent Orgéas, J.P. Vassal. Conduction in composites with highly conductive short fibres: comparison between experiments, discrete element simulation and analytical solution. ECCM 13 Conference, Jun 2008, Stockholm, Sweden. Paper n° 2012. ⟨hal-00454996⟩
  • Pierre J.J. Dumont, D. Favier, Laurent Orgéas, S. Le Corre. Modélisation de l'écoulement et des évolutions de microstructures des suspensions très concentrées de fibres. Rhéologie et Thermodynamique. 43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. pp.45-48. ⟨hal-00455009⟩
  • Pierre J.J. Dumont, D. Favier, O. Guiraud, Laurent Orgéas, J.P. Vassal. Rhéologie de suspensions modèles transparentes et très concentrées de fibres. Analyse par un rhéomètre transparent de compression en déformation plane. Rhéologie et Thermodynamique. 43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. pp.41-44. ⟨hal-00455015⟩
  • Pierre J.J. Dumont, D. Favier, V. Michaud, Laurent Orgéas. Experimental study of segregation phenomena during compression of glass mat thermoplastics (GMT). 9th International Conference on Flow Processes in Composite Materials (FPCM9), Jul 2008, Montréal, Canada. ⟨hal-00449656⟩
  • Pauline Schlosser, Denis Favier, Hervé Louche, Laurent Orgéas, Yehan Liu. Is the tensile test relevant to characterize NiTi shape memory alloy behaviour?. Int. Conference for Shape Memory and Superelastic Technologies (SMST), Sep 2008, Stresa, Italy. ⟨hal-00344267⟩
  • Pierre J.J. Dumont, D. Favier, O. Guiraud, Laurent Orgéas, J.P. Vassal. Modélisation et simulation de la rhéologie de suspensions de fibres concentrées modèles lors de leur mise en forme. Colloque National MECAMAT, Jan 2008, Aussois, France. ⟨hal-00507341⟩
  • Pierre J.J. Dumont, D. Favier, V. Michaud, Laurent Orgéas. Segretation phenomena between the polymer matrix and the fibrous reinforcement of glass mat thermoplastics (GMT) during compression moulding. ESAFORM Conference, Apr 2008, Lyon, France. ⟨hal-00453418⟩
  • Pauline Schlosser, Denis Favier, Hervé Louche, Laurent Orgéas. Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements. 3st Int. Conf. Smart Materials structure systems (CIMTEC 2008), Invited speaker, Jun 2008, France. ⟨hal-00344254⟩
  • Pierre J.J. Dumont, D. Favier, T.H. Le, Laurent Orgéas, O. Guiraud. Modelling and simulation of the rheology of bulk moulding compounds (BMC) during mould filling. ECCM 13 Conference, Jun 2008, Stockholm, Sweden. Paper n° 1611. ⟨hal-00449661⟩
  • Muriel Palengat, Olivier Guiraud, Christophe Millet, Grégory Chagnon, Denis Favier. Détermination du coefficient de frottement par analyse inverse pour l'étirage de tube. Mecmat, Jan 2008, Aussois, France. ⟨hal-01978986⟩
  • Pierre J.J. Dumont, D. Favier, L. Orgeas, J.P. Vassal. A transparent compression rheometer for studying flow-induced microstructures of transparent fibre suspensions. 4th Annual European Rheology Conference (AERC), Apr 2007, Naples, Italy. ⟨hal-00292824⟩
  • Pierre J.J. Dumont, D. Favier, L. Orgeas, C. Venet, T.H. Le. Rhéologie des Bulk Moulding Compounds (BMC) lors de leur injection. 18ème Congrès Français de Mécanique (CFM), Aug 2007, Grenoble, France. ⟨hal-00292779⟩
  • Pierre J.J. Dumont, D. Favier, T.H. Le, L. Orgeas, C. Venet. Rheology of bulk moulding compounds. 4th Annual European Rheology Conference (AERC), Apr 2007, Naples, Italy. ⟨hal-00292820⟩
  • Pierre J.J. Dumont, D. Favier, T.H. Le, L. Orgeas, L. Salvo, et al.. Characterization of the fibrous microstructure of SMC during compression moulding using X-ray microtomography. 16th International Conference on Composite Materials (ICCM), Jul 2007, Kyoto, Japan. ⟨hal-00292828⟩
  • Pauline Schlosser, Denis Favier, Hervé Louche, Laurent Orgéas, P. Comte-Gaz. Strain and thermal Heterogeneities analyse during superelastic deformation of polycrystalline NiTi tube. ASME Applied Mechanics and Materials Conference (McMat 2007), Jun 2007, Austin, United States. ⟨hal-00344270⟩
  • Denis Favier, Hervé Louche, Pauline Schlosser, Laurent Orgéas. Physical mechanisms of the deformation of a polycrystalline Ni-Ti thin tube under tension studied through full-field measurements. McMat 2007, ASME Applied Mechanics and Materials Conference, Jun 2007, Austin, United States. ⟨hal-00344241⟩
  • Muriel Palengat, Grégory Chagnon, Christophe Millet, Denis Favier. Modélisation de l'étirage à froid de tubes par analyse éléments-finis. 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. ⟨hal-01978980⟩
  • Muriel Palengat, Olivier Guiraud, Christophe Millet, Grégory Chagnon, Denis Favier. Tube Drawing Process Modelling By A Finite Element Analysis. Materials & Processes for Medical Devices Conference, Sep 2007, Palm Desert, CA, United States. pp.65-72. ⟨hal-01978976⟩
  • Muriel Palengat, Grégory Chagnon, Christophe Millet, Denis Favier. Tube Drawing Process Modelling By A Finite Element Analysis. 9th international conference on numerical methods in industrial forming processes, Jun 2007, Porto, Portugal. ⟨hal-01978983⟩
  • Luc Meunier, Grégory Chagnon, Denis Favier, Laurent Orgeas. Experimental and Numerical Study of the Mechanical Behaviour of an Unfilled Silicone Rubber. 5th European Conference on Constitutive Models for Rubber, ECCMR 2007, Sep 2007, Paris, France. ⟨hal-01978981⟩
  • Luc Meunier, Grégory Chagnon, Denis Favier, Laurent Orgeas. Caractérisation du comportement mécanique d’ élastomères silicones chargés et non chargés. 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. ⟨hal-01978979⟩
  • J.-P. Vassal, L. Orgeas, Steven Le Corre, D. Favier, J.-L. Auriault. Conductivité thermique des composites à fort contraste de phase : approche théorique et numérique. MATERIAUX 2006, 2006, Dijon, France. ⟨hal-01008016⟩
  • Grégory Chagnon, Philippe Cinquin, Anne Devin, Vanessa Durrieu, Denis Favier, et al.. Osmotic motor : Osmotor. Nanobio, 2006, Grenoble, France. ⟨hal-01986567⟩
  • J.-P. Vassal, L. Orgeas, Steven Le Corre, D. Favier. Transfert de chaleur par conduction dans les milieux fibreux. 7ème Journées d'Etude sur les Milieux Poreux, 2005, Bordeaux, France. ⟨hal-01009064⟩
  • P. Dumont, Steven Le Corre, L. Orgeas, D. Favier. A micro-macro analysis of the evolution of fibre orientation in highly concentrated planar fibre suspensions. AERC 2005 2nd Annual European Rheology Conference, 2005, Grenoble, France. ⟨hal-01007754⟩
  • D. Favier, Yehan Liu, L. Orgeas, Arnaud Sandel, L. Debove, et al.. Influence of thermomechanical treatment on the superelastic properties of a Ti-50.8%atNi shape memory alloy.. Euromat 2005, Sep 2005, République tchèque. ⟨hal-00507190⟩
  • Vincent Gaudin, Philippe Cinquin, Denis Favier, Laurent Orgéas, Grégory Chagnon, et al.. Conception d'un joint osmotique pour stents. 1ères Journées de modélisation numérique en biomécanique, 2005, Saint Etienne, France. ⟨hal-01875155⟩
  • D. Favier, Yehan Liu, L. Orgeas, Arnaud Sandel, L. Debove, et al.. Influence of thermomechanical treatment processes on the superelastic properties of a Ni-rich nitinol shape memory alloy. EMMC - Mecamat, May 2003, France. ⟨hal-00507919⟩
  • Steven Le Corre, Denis Caillerie, Denis Favier, Laurent Orgéas. Overall behaviour of a truss of fibers linked by viscous joints. Composites for the millenium (FRC2000), 2000, Newcastle-upon-Tyne, United Kingdom. pp.303 - 310, ⟨10.1533/9780857093134.303⟩. ⟨hal-01008641⟩
  • Jean-Christophe Gebelin, Christian Geindreau, Laurent Orgéas, Pascale Royer, Denis Favier, et al.. Influence of the liquid flow through the solid skeleton on the overall deformation of a material in semi-solid state. 6th International Conference on the Semi-Solid Processing of Alloys and Composites , Sep 2000, Turin, Italy. ⟨hal-01717372⟩

Poster communications2 documents

  • Gérard Rio, Denis Favier, Nathanaël Connesson, Thierry Alonso. Finite element simulation of the influence of heat treatment temperature on tension, compression and bending behavior of nanostructured NiTi wires. The International Conference on Shape Memory and Superelastic Technologies, May 2019, Konstanz, Germany. ⟨hal-02314554⟩
  • Grégory Chagnon, Philippe Cinquin, Anne Devin, Vanessa Durrieu, Denis Favier, et al.. Osmotic Motor: OSMOTOR. Entretiens Jacques Cartier, Nanobiotechnologie pour l'analyse et la conversion d''énergie., 2006, Grenoble, France. ⟨hal-01986563⟩

Book sections2 documents

  • Grégory Chagnon, Jacques Ohayon, Jean-Louis Martiel, Denis Favier. Hyperelasticity Modeling for Incompressible Passive Biological Tissues. Biomechanics of Living Organs, Elsevier, pp.3-30, 2017, ⟨10.1016/B978-0-12-804009-6.00001-8⟩. ⟨hal-01974109⟩
  • Vincent Luboz, Emmanuel Promayon, Grégory Chagnon, Thierry Alonso, Denis Favier, et al.. Validation of a Light Aspiration device for in vivo Soft TIssue Characterization (LASTIC). Yohan Payan. Soft Tissue Biomechanical Modeling for Computer Assisted Surgery, Springer-Verlag, pp.243-256, 2012, 978-3-642-29013-8. ⟨10.1007/8415_2012_123⟩. ⟨hal-00706828⟩

Patents5 documents

  • Denis Favier, Thierry Alonso, Grégory Chagnon, Yinong Liu, Alexandre Moreau-Gaudry. Device for guiding a medical needle. United States, Patent n° : US 10.039.568.B2. 2018. ⟨hal-02311643⟩
  • Nathanaël Connesson, Yohan Payan, Gabriel Antherieu, Denis Favier. Dispositif de test mécanique en flexion pure et procédé de mise en œuvre. . France, Patent n° : WO 2016/001426 A1. 2016. ⟨hal-01404149⟩
  • Philippe Cinquin, Denis Favier, Thierry Alonso, Aziz Bakri, Nawel Khalef, et al.. Dispositif de prise d'échantillon intestinal. France, Patent n° : FR1655187. 2016. ⟨hal-02010250⟩
  • Denis Favier, Pierre Mozer, Yohan Payan, Gabriel Antherieu, Nathanaël Connesson. Stent spacer. United States, Patent n° : US 2016/0151179 A1. 2016. ⟨hal-01404159⟩
  • Denis Favier, Pierre Mozer, Yohan Payan, Gabriel Antherieu, Nathanaël Connesson. Ecarteur de type stent. France, Patent n° : FR N°13/55935. 2013. ⟨hal-00996212⟩