Bruno CASTANIÉ

193

Documents

Publications

	Multiaxial loading of aeronautic composite structures at intermediate scale: A review of VERTEX developments Bruno Castanié , Jean-Charles Passieux , Jean-Noël Périé , Christophe Bouvet , John-Eric Dufour Composites Part C: Open Access, inPress, pp.100439. ⟨10.1016/j.jcomc.2024.100439⟩ Article dans une revue hal-04477158v1
	Wood and Plywood as eco-materials for sustainable mobility:a review B. Castanié , A. Peignon , C. Marc , F. Eyma , A. Cantarel Composite Structures, 2024, pp.117790. ⟨10.1016/j.compstruct.2023.117790⟩ Article dans une revue hal-04337282v1
	Characterization of mode II delamination behaviour of poplar plywood and LVL H. Hadiji , J. Serra , R. Curti , D. Gebrehiwot , Bruno Castanié Theoretical and Applied Fracture Mechanics, inPress, pp.104354. ⟨10.1016/j.tafmec.2024.104354⟩ Article dans une revue hal-04485916v1
	Design and Testing of Impacted Stiffened CFRP Panels under Compression with the VERTEX Test Rig Florent Grotto , Christophe Bouvet , Bruno Castanié , Joël Serra Aerospace, 2023, 10 (4), pp.327. ⟨10.3390/aerospace10040327⟩ Article dans une revue hal-04080629v1
	Effect of defects combined with impact damage on compressive residual strength in curved CFRP specimen P. Journoud , C. Bouvet , B. Castanié , L. Ratsifandrihana Thin-Walled Structures, 2023, 184, pp.110484. ⟨10.1016/j.tws.2022.110484⟩ Article dans une revue hal-04205741v1
	Mode I delamination R-Curve in poplar laminated veneer lumber Axel Peignon , Joël Serra , L. Gélard , Arthur Cantarel , Florent Eyma Theoretical and Applied Fracture Mechanics, 2023, ⟨10.1016/j.tafmec.2023.103982⟩ Article dans une revue hal-04141431v2
	Experimental behaviour of aeronautical notched carbon fibre reinforced thermoplastic panels under combined tension-shear-pressure loadings Florent Grotto , Christophe Bouvet , Bruno Castanié , Joël Serra Engineering Failure Analysis, inPress, 146, pp.107075. ⟨10.1016/j.engfailanal.2023.107075⟩ Article dans une revue hal-03958248v1
	Local buckling on large sandwich panels applied to light aviation: Experimental and computation dialogue M. Ginot , C. Bouvet , B. Castanié , M. d'Ottavio , Joël Serra International Journal of Solids and Structures, 2023, 268, pp.112170. ⟨10.1016/j.ijsolstr.2023.112170⟩ Article dans une revue hal-04080624v1
	Static and dynamic crushing of sandwich tubes with composite skins and three plywood cores (poplar, birch, and oak) Romain Guélou , Florent Eyma , Arthur Cantarel , Samuel Rivallant , Bruno Castanié International Journal of Crashworthiness, 2023, pp.1-22. ⟨10.1080/13588265.2023.2270189⟩ Article dans une revue hal-04259629v1
	Local buckling on large sandwich panels used in light aviation M. Ginot , C. Bouvet , Bruno Castanié , Joël Serra , N. Mahuet Composite Structures, inPress, 304 (Part 1), pp.116439. ⟨10.1016/j.compstruct.2022.116439⟩ Article dans une revue hal-03859793v1
	Experimental and numerical compressive tests on curved laminate structures with embedded wrinkles Pierre Journoud , Christophe Bouvet , Bruno Castanié , Leon Ratsifandrihana Mechanics of Advanced Materials and Structures, inPress, pp.1-21. ⟨10.1080/15376494.2022.2116665⟩ Article dans une revue hal-03859768v1
	A comparison of three wood species (poplar, birch and oak) for crash application R. Guélou , Florent Eyma , Arthur Cantarel , Samuel Rivallant , Bruno Castanié European Journal of Wood and Wood Products, inPress, ⟨10.1007/s00107-022-01871-x⟩ Article dans une revue hal-03859779v1
	Experimental analysis of the effects of wrinkles in the radius of curvature of L-shaped carbon-epoxy specimens on unfolding failure Pierre Journoud , Christophe Bouvet , Bruno Castanié , Léon Ratsifandrihana Composites Part A: Applied Science and Manufacturing, 2022, 158, pp.106975. ⟨10.1016/j.compositesa.2022.106975⟩ Article dans une revue hal-03685778v1
	Numerical analysis of the effects of wrinkles in the radius of curvature of L-shaped CFRP specimens on unfolding failure P. Journoud , Christophe Bouvet , Bruno Castanié , L. Ratsifandrihana Composite Structures, 2022, 299, pp.116107. ⟨10.1016/j.compstruct.2022.116107⟩ Article dans une revue hal-03847451v1
	Manufacturing and impact behaviour of aeronautic overmolded grid-stiffened thermoplastic carbon plates F. Neveu , C. Cornu , P. Olivier , Bruno Castanié Composite Structures, 2022, 284, pp.115228. ⟨10.1016/j.compstruct.2022.115228⟩ Article dans une revue hal-04108752v1
	Dynamic crushing of wood-based sandwich composite tubes Romain Guélou , Florent Eyma , Arthur Cantarel , Samuel Rivallant , Bruno Castanié Mechanics of Advanced Materials and Structures, 2021, pp.1-21. ⟨10.1080/15376494.2021.1991533⟩ Article dans une revue hal-03407710v1
	Static crushing of wood based sandwich composite tubes R. Guélou , Florent Eyma , Arthur Cantarel , Samuel Rivallant , Bruno Castanié Composite Structures, 2021, 273, pp.114317. ⟨10.1016/j.compstruct.2021.114317⟩ Article dans une revue hal-03286667v1
	Crashworthiness of poplar wood veneer tubes R. Guélou , Florent Eyma , Arthur Cantarel , Samuel Rivallant , Bruno Castanié International Journal of Impact Engineering, 2021, 147, pp.103738. ⟨10.1016/j.ijimpeng.2020.103738⟩ Article dans une revue hal-02975947v1
	Benchmark of wrinkling formulae and methods for pre-sizing of aircraft lightweight sandwich structures M. Ginot , Michele d'Ottavio , Olivier Polit , Christophe Bouvet , Bruno Castanié Composite Structures, 2021, 273, pp.114387. ⟨10.1016/j.compstruct.2021.114387⟩ Article dans une revue hal-03407730v1
	Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates Laure Moretti , Philippe Olivier , Bruno Castanié , Gérard Bernhart Composites Part A: Applied Science and Manufacturing, 2021, 142, ⟨10.1016/j.compositesa.2020.106224⟩ Article dans une revue hal-03078389v1
	Combined loadings after medium velocity impact on large CFRP laminated plates: Discrete ply model simulations Joel Serra , A Trellu , Christophe Bouvet , Samuel Rivallant , Bruno Castanié Composites Part C: Open Access, 2021, 6, ⟨10.1016/j.jcomc.2021.100203⟩ Article dans une revue hal-03512437v1
	Review of composite sandwich structure in aeronautic applications Bruno Castanié , Christophe Bouvet , Malo Ginot Composites Part C: Open Access, 2020, 1, pp.0. ⟨10.1016/j.jcomc.2020.100004⟩ Article dans une revue hal-02952087v1
	On the potting failure of inserts for sandwich panels: Review of defects and experimental analysis Juan de Dios Rodríguez-Ramírez , Bruno Castanié , Christophe Bouvet Mechanics of Advanced Materials and Structures, 2020, pp.1-19. ⟨10.1080/15376494.2020.1724352⟩ Article dans une revue hal-02975995v1
	Damage Mechanics Modelling of the shear nonlinear behavior of Nomex honeycomb core. Application to sandwich beams Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet Mechanics of Advanced Materials and Structures, 2020, 27 (1), pp.0. ⟨10.1080/15376494.2018.1472351⟩ Article dans une revue hal-01880448v1
	Effect of milled notches on the strength of open hole, filled holes, single and double lap shear CFRP tension coupons Bruno Castanié , Victor Achard , Clément Chirol Composite Structures, 2020, 254, pp.112872. ⟨10.1016/j.compstruct.2020.112872⟩ Article dans une revue hal-02975936v1
	Characterization and modelling of cure-dependent properties and strains during composites manufacturing Laure Moretti , Bruno Castanié , Gérard Bernhart , Philippe Olivier Journal of Composite Materials, 2020, 54 (22), pp.3109-3124. ⟨10.1177/0021998320912470⟩ Article dans une revue hal-02514952v1
	Insert of sandwich panels sizing through a failure mode map Juan de Dios Rodríguez Ramírez , Bruno Castanié , Christophe Bouvet Composite Structures, 2020, 234, pp.0. ⟨10.1016/j.compstruct.2019.111724⟩ Article dans une revue hal-02952824v1
	Effective Static and Dynamic Finite Element Modeling of a Double Swept Composite Rotor Blade Matteo Filippi , Enrico Zappino , Erasmo Carrera , Bruno Castanié Journal of the American Helicopter Society, 2020, 65 (3), pp.1-12. ⟨10.4050/JAHS.65.032003⟩ Article dans une revue hal-02975961v1
	Combined loadings after medium velocity impact on large CFRP laminate plates: Tests and enhanced computation/testing dialogue Antoine Trellu , Guillaume Pichon , Christophe Bouvet , Samuel Rivallant , Bruno Castanié Composites Science and Technology, 2020, 196, pp.108194. ⟨10.1016/j.compscitech.2020.108194⟩ Article dans une revue hal-02954087v1
	Visuo-tactile and topographic characterizations of finished wood surface quality by French consumers and industrials: acceptability thresholds for raised grain Miora Ramanakoto , Tahiana Ramananantoandro , Florent Eyma , Bruno Castanié Annals of Forest Science, 2019, 76 (1), pp.26. ⟨10.1007/s13595-019-0807-1⟩ Article dans une revue hal-02078596v1
	Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures Laurent Mezeix , Simon Dols , Christophe Bouvet , Bruno Castanié , Jean-Paul Giavarini Journal of Sandwich Structures and Materials, 2019, 21 (1), pp.135-153. ⟨10.1177/1099636216687582⟩ Article dans une revue hal-01828703v1
	The GAP methodology: A new way to design composite structures Florian Neveu , Bruno Castanié , Philippe Olivier Materials & Design, 2019, 172, pp.107755. ⟨10.1016/j.matdes.2019.107755⟩ Article dans une revue hal-02104764v1
	Experimental and numerical analysis of unfolding failure of L-shaped CFRP specimens Pierre Journoud , Christophe Bouvet , Bruno Castanié , Frédéric Laurin , Léon Ratsifandrihana Composite Structures, 2019, 232, 111563, p. 1-13. ⟨10.1016/j.compstruct.2019.111563⟩ Article dans une revue hal-02382912v1
	Experimental investigation of compression and compression after impact of wood-based sandwich structures John Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Christophe Bouvet Composite Structures, 2019, 220, pp.236-249. ⟨10.1016/j.compstruct.2019.03.095⟩ Article dans une revue hal-02104770v1
	Numerical modeling of impact on wood-based sandwich structures John Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Bruno Castanié Mechanics of Advanced Materials and Structures, 2019, pp.0. ⟨10.1080/15376494.2018.1519619⟩ Article dans une revue hal-02053251v1
	An aeronautics and space-oriented research group Bruno Castanié JEC Composites Magazine, 2018, pp.41-47 Article dans une revue hal-02024409v1
	Experimental and numerical analysis of the shear nonlinear behaviour of Nomex honeycomb core: Application to insert sizing Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet Composite Structures, 2018, vol. 193, pp. 121-139. ⟨10.1016/j.compstruct.2018.03.076⟩ Article dans une revue hal-01793199v1
	Experimental investigation of impact behavior of wood-based sandwich structures John Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Bruno Castanié Composites Part A: Applied Science and Manufacturing, 2018, vol. 109, pp. 10-19. ⟨10.1016/j.compositesa.2018.02.029⟩ Article dans une revue hal-01826277v1
	Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 2: Load envelopes for the assessment of panels with large notches Joël Serra , Jean-Emmanuel Pierré , Jean-Charles Passieux , Jean-Noël Périé , Christophe Bouvet Composite Structures, 2017, 180, pp.550-567. ⟨10.1016/j.compstruct.2017.08.055⟩ Article dans une revue hal-01617966v1
	Bearing fatigue of composite laminates: Damage monitoring and fatigue life prediction Cyril Sola , Bruno Castanié , Laurent Michel , Frederic Lachaud , Arnaud Delabie Composites Part B: Engineering, 2017, 110, pp.487-496. ⟨10.1016/j.compositesb.2016.11.031⟩ Article dans une revue hal-02160873v1
	Manufacturing and quasi-static bending behavior of wood-based sandwich structures. John Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Bruno Castanié Composite Structures, 2017, 182, pp.487-504. ⟨10.1016/j.compstruct.2017.09.034⟩ Article dans une revue hal-01657898v1
	Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading Joël Serra , Christophe Bouvet , Bruno Castanié , Caroline Petiot Composite Structures, 2017, 181, pp.145-157. ⟨10.1016/j.compstruct.2017.08.090⟩ Article dans une revue hal-01828727v1
	Spring-in prediction for carbon/epoxy aerospace composite structure M. Fiorina , A. Seman , Bruno Castanié , K. M. Ali , C. Schwob Composite Structures, 2017, 168, pp.739--745 Article dans une revue hal-01950756v1
	Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures Joël Serra , Jean-Emmanuel Pierré , Jean-Charles Passieux , Jean-Noël Périé , Christophe Bouvet Composite Structures, 2017, 179, p.224-244. ⟨10.1016/j.compstruct.2017.07.080⟩ Article dans une revue hal-01617903v1
	Static and dynamic analysis of bending–torsion coupling of a CFRP sandwich beam Loïc Bernard , Guilhem Michon , Rached El Fatmi , Bruno Castanié Composite Structures, 2016, 145, pp.26 - 36. ⟨10.1016/j.compstruct.2016.02.055⟩ Article dans une revue hal-01924062v1
	Scaling effect in notched composites: The Discrete Ply Model approach Joël Serra , Christophe Bouvet , Bruno Castanié , Caroline Petiot Composite Structures, 2016, 148, pp.127-143. ⟨10.1016/j.compstruct.2016.03.062⟩ Article dans une revue hal-01828731v1
	On the role of kinking in the bearing failure of composite laminates Cyril Sola , Bruno Castanié , Laurent Michel , Frederic Lachaud , Arnaud Delabie Composite Structures, 2016, 141, pp.184-193. ⟨10.1016/j.compstruct.2016.01.058⟩ Article dans une revue hal-02163496v1
	Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites M. Haddad , Redouane Zitoune , Florent Eyma , Bruno Castanié Experimental Mechanics, 2015, 55 (3), p. 519-528. ⟨10.1007/s11340-014-9967-y⟩ Article dans une revue hal-01611014v1
	Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates Soraya Catche , Robert Piquet , Frederic Lachaud , Bruno Castanié , Audrey Benaben Journal of Composite Materials, 2015, 49 (10), pp.1223-1240. ⟨10.1177/0021998314532668⟩ Article dans une revue hal-01951221v1
	Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process L. Mezeix , A. Seman , M. N. M. Nasir , Y. Aminanda , A. Rivai Composite Structures, 2015, 124, pp.196--205 Article dans une revue hal-01951243v1
	Tolérance aux dommages de perçages dans les assemblages boulonnés composites Robert Piquet , Frederic Lachaud , Soraya Catché , Bruno Castanié Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2014, 24 (4), pp.481--493 Article dans une revue hal-01952586v1
	Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range Madjid Haddad , Redouane Zitoune , Florent Eyma , Bruno Castanié Composites Part A: Applied Science and Manufacturing, 2014, 66, pp.142--154 Article dans une revue hal-01952583v1
	Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior Madjid Haddad , Redouane Zitoune , H. Bougherara , Florent Eyma , Bruno Castanié Composites Part B: Engineering, 2014, 57, pp.136--143 Article dans une revue hal-01952584v1
	Discrete ply modelling of open hole tensile tests Victor Achard , Christophe Bouvet , Bruno Castanié , Clément Chirol Composite Structures, 2014, vol. 113, pp. 369-381. ⟨10.1016/j.compstruct.2014.03.031⟩ Article dans une revue hal-01063573v1
	Experimental Analysis of Debonding of Skin/Stringer Interfaces under Cyclic Loading and Ageing Ahmed Abbadi , Laurent Michel , Bruno Castanié Advanced composites letters, 2014, 23 (6), pp.142-148. ⟨10.1177/096369351402300602⟩ Article dans une revue hal-01952562v2
	Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage Redouane Zitoune , N. Cadorin , Bruno Castanié , M. Sève Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2013, 23 (3), pp.387--404 Article dans une revue hal-02180500v1
	Machinability and surface quality during high speed trimming of multi directional CFRP Madjid Haddad , Redouane Zitoune , Florent Eyma , Bruno Castanié International Journal of Machining and Machinability of Materials, 2013, 13 (2/3), pp.289. ⟨10.1504/IJMMM.2013.053229⟩ Article dans une revue hal-02078611v1
	An adaptive model reduction strategy for post-buckling analysis of stiffened structures Ludovic Barrière , Steven Marguet , Bruno Castanié , Philippe Cresta , Jean-Charles Passieux Thin-Walled Structures, 2013, 73, pp.81-93. ⟨10.1016/j.tws.2013.07.009⟩ Article dans une revue hal-00870773v1
	Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven Alvine Njionhou , Florentin Berthet , Bruno Castanié International Journal of Advanced Manufacturing Technology, 2013, 65 (9-12), pp.1289-1302. ⟨10.1007/s00170-012-4257-2⟩ Article dans une revue hal-01687311v1
	Application of high-performance computing to a bolt static tensile test Louis Adam , Alain Daidié , Bruno Castanié , Elodie Bonhomme International Journal on Interactive Design and Manufacturing, 2012, 6 (3), pp.195-203. ⟨10.1007/s12008-012-0153-0⟩ Article dans une revue hal-02048303v1
	Discrete ply model of circular pull-through test of fasteners in laminates Louis Adam , Christophe Bouvet , Bruno Castanié , Alain Daidié , Elodie Bonhomme Composite Structures, 2012, vol. 94, pp. 3082-3091. ⟨10.1016/j.compstruct.2012.05.008⟩ Article dans une revue hal-00759881v1
	Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates Alvine Njionhou , Florentin Berthet , Bruno Castanié , Christophe Bouvet Applied Composite Materials, 2012, vol. 19, pp. 885-899. ⟨10.1007/s10443-011-9241-8⟩ Article dans une revue hal-00759285v1
	Multi-level analysis of low-cost Z-pinned composite joints: Part 2 : Joint Behavior Javier Toral-Vasquez , Bruno Castanié , Jean-Jacques Barrau , Nicolas Swiergiel Composites Part A: Applied Science and Manufacturing, 2011, 42 (12), pp.2082-2092 Article dans une revue hal-02048289v1
	MULTI-LEVEL ANALYSIS OF LOW-COST Z-PINNED COMPOSITE JUNCTIONS. PART 1 : SINGLE Z-PIN BEHAVIOR Javier Toral-Vasquez , Bruno Castanié , Jean-Jacques Barrau , Nicolas Swiergiel Composites Part A: Applied Science and Manufacturing, 2011, 42 (12), pp.2070-2081. ⟨10.1016/j.compositesa.2011.09.017⟩ Article dans une revue hal-02048256v1
	EXPERIMENTAL ANALYSIS OF FAILURES IN FILLED HOLE COMPRESSION TESTS OF CARBON/EPOXY LAMINATE Bruno Castanié , Serge Crézé , Jean-Jacques Barrau , Frederic Lachaud , Laurent Risse Composite Structures, 2010, 92 (5), pp.1192-1199 Article dans une revue hal-02048231v1
	Optimisation de la résistance au cisaillement interlaminaire (RCIL) des matériaux composites fabriqués par LRI en fonction des paramètres de fabrication Alvine Njionhou Kepnang , Florentin Berthet , Bruno Castanié Matériaux & Techniques, 2010, 98 (2), p.151-163. ⟨10.1051/mattech/2010019⟩ Article dans une revue hal-01847797v1
	Multi-level experimental and numerical analysis of composite stiffener debonding. Part 1: Non-specific specimen level Julien Bertolini , Bruno Castanié , Jean-Jacques Barrau , Jean-Philippe Navarro Composite Structures, 2009, 90 (4), pp.381-391. ⟨10.1016/j.compstruct.2009.04.001⟩ Article dans une revue hal-02048193v1
	Multi-level experimental and numerical analysis of composite stiffener debonding. Part 2: Element and panel level Julien Bertolini , Bruno Castanié , Jean-Jacques Barrau , Jean-Philippe Navarro , Caroline Petiot Composite Structures, 2009, 90 (4), pp.392-403. ⟨10.1016/j.compstruct.2009.04.002⟩ Article dans une revue hal-02048203v1
	Experimental and numerical study of compression after impact of sandwichs structures with metallic skins Y. Aminanda , Bruno Castanié , J-J. Barrau , P. Thevenet Composites Science and Technology, 2009, 69 (1), pp.50. ⟨10.1016/j.compscitech.2007.10.045⟩ Article dans une revue hal-00563494v1
	Experimental and numerical study of compression after impact of sandwich structures with metallic skins Y. Aminanda , Bruno Castanié , J.-J. Barrau , P. Thévenet Composites Science and Technology, 2009, 69 (1), pp.50-59 Article dans une revue hal-02025736v1
	Low velocity impact modelling in laminate composite panels with discrete interface elements Christophe Bouvet , Bruno Castanié , Matthieu Bizeul , Jean-Jacques Barrau International Journal of Solids and Structures, 2009, 46 (14-15), pp.2809-2821. ⟨10.1016/j.ijsolstr.2009.03.010⟩ Article dans une revue hal-01851855v1
	CORE CRUSH CRITERION TO DETERMINE THE STRENGTH OF SANDWICH COMPOSITE STRUCTURES SUBJECTED TO COM-PRESSION AFTER IMPACT Bruno Castanié , Yulfian Aminanda , Christophe Bouvet , Jean-Jacques Barrau Composite Structures, 2008, 86 (1-3), pp.243-250 Article dans une revue hal-02025726v1
	Non-linear finite element analysis of inserts in composite sandwich structures P. Bunyawanichakul , Bruno Castanié , J.-J. Barrau Composites Part B: Engineering, 2008, 39 (7-8), pp.1077-1092 Article dans une revue hal-02025740v1
	An experimental and numerical study on omega stringer debonding Julien Bertolini , Bruno Castanié , Jean-Jacques Barrau , Jean-Philippe Navarro Composite Structures, 2008, 86 (1-3), pp.233-242 Article dans une revue hal-02025719v1
	Modelling of low energy/low velocity impact on Nomex honeycomb sandwich structures with metallic skins Bruno Castanié , Christophe Bouvet , Y. Aminanda , J.-J. J.-J. Barrau , P. Thevenet International Journal of Impact Engineering, 2008, 35 (7), pp.620. ⟨10.1016/j.ijimpeng.2007.02.008⟩ Article dans une revue hal-00499100v1
	Buckling and post-buckling of beams with flat webs Jean-Jacques Barrau , Serge Crézé , Bruno Castanié Thin-Walled Structures, 2005, 43 (6), pp.877-894 Article dans une revue hal-02025706v1
	Experimental and Numerical Analysis of Inserts in Sandwich Structures P. Bunyawanichakul , Bruno Castanié , J. -J. Barrau Applied Composite Materials, 2005, 12 (3-4), pp.177-191 Article dans une revue hal-02025700v1
	Experimental Analysis and Modeling of the Crushing of Honeycomb Cores Y. Aminanda , Bruno Castanié , J. -J. Barrau , P. Thévenet Applied Composite Materials, 2005, 12 (3-4), pp.213-227 Article dans une revue hal-02025694v1
	Modélisation de l'indentation des structures sandwichs à peaux métalliques Y. Aminanda , Bruno Castanié , J.-J. Barrau , P. Thévenet Mécanique et Industries, 2005, 6 (5), pp.487-498 Article dans une revue hal-02025709v1
	Combined shear/compression structural testing of asymmetric sandwich structures Bruno Castanié Experimental Mechanics, 2004, 44 (5), pp.461-472 Article dans une revue hal-01983384v1
	Theoretical and experimental analysis of asymmetric sandwich structures Bruno Castanié , J.-J. Barrau , J.-P. Jaouen Composite Structures, 2002, 55 (3), pp.295-306. ⟨10.1016/S0263-8223(01)00156-8⟩ Article dans une revue hal-01983376v1
	Analytical theory for an approach calculation of non-balanced composite box beams Jean-François Ferrero , Jean-Jacques Barrau , Jean Marie Segura , Michel Sudre , Bruno Castanié Thin-Walled Structures, 2001, 39 (8), pp.709 - 729. ⟨10.1016/S0263-8231(01)00018-0⟩ Article dans une revue hal-01894183v1
	Torsion of thin-walled composite beams with midplane symmetry Jean-François Ferrero , Jean-Jacques Barrau , Jean Marie Segura , Bruno Castanié , Michel Sudre Composite Structures, 2001, 54 (1), pp.111 - 120. ⟨10.1016/S0263-8223(01)00075-7⟩ Article dans une revue hal-01894151v1

	Evaluation du taux de restitution d'énergie en mode I d'un LVL de peuplier Axel Peignon , Joël Serra , Gelard Léo , Arthur Cantarel , Florent Eyma 12èmes journées du GDR 3544 « Sciences du bois » (2023), Université de Limoges, Nov 2023, Limoges, France. à paraître Communication dans un congrès hal-04287252v1
	Mechanical characterization and modelling of poplar plywood Axel Peignon , Bruno Castanié , Eyma Florent , Arthur Cantarel , Joël Serra JNC23 : Journées Nationales sur les Composites 2023, Jul 2023, Besançon (France), France Communication dans un congrès hal-04206181v1
	Prédictions numériques de la tolérance aux dommages d'impact d'une structure composite soumise à des chargements complexes Joel Serra , Antoine Trellu , Christophe Bouvet , Samuel Rivallant , Bruno Castanie 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, Giens, France Communication dans un congrès hal-03717685v1
	On the crashworthiness properties of plywood. Bruno Castanié , Romain Guélou , Arthur Cantarel , Samuel Rivallant , Florent Eyma SECOND EUROPEAN CONFERENCE ON CRASHWORTHINESS OF COMPOSITE STRUCTURES (ECCCS-2), Nov 2022, Toulouse, France Communication dans un congrès hal-03859833v1
	Structural testing of local buckling for the design of sandwich aircraft structures Malo Ginot , Bruno Castanié , Christophe Bouvet , Mahuet Nicolas 20th European Conference on Composite Materials (ECCM20), Jun 2022, Lausanne, Switzerland. 9 p Communication dans un congrès hal-03859844v1
	Wood as a sustainable material for transportation industry. Bruno Castanié 25th International Conference on Composite Structures. ICCS-25, Jul 2022, Porto, Portugal Communication dans un congrès hal-03859803v1
	Le bois, un matériau pour la mobilité durable? Bruno Castanié , Christophe Bouvet , Joël Serra , Florent Eyma , Arthur Cantarel 2éme Conférence sur les Eco-Matériaux en Afrique – CEMA’2022, Jun 2022, Saly, Senegal Communication dans un congrès hal-03859861v1
	Le bois, un matériau pour la mobilité durable ? Bruno Castanié , Christophe Bouvet , Joël Serra , Florent Eyma , Arthur Cantarel 2éme Conférence sur les Eco-Matériaux en Afrique – CEMA’2022, Jun 2022, Saly, Sénégal Communication dans un congrès hal-03909308v1
	Mechanical characterization and modelling of poplar plywood. Bruno Castanié , Axel Peignon , Arthur Cantarel , Florent Eyma , Joel Serra 25th International Conference on Composite Structures. ICCS-25, Jul 2022, Porto, Portugal Communication dans un congrès hal-03859814v1
	Structural testing of impacted stiffened panels on the VERTEX test rig Florent Grotto , Christophe Bouvet , Bruno Castanié , Joël Serra 2nd European Conference on Crashworthiness of Composite Structures ECCCS2, Nov 2022, Toulouse, France Communication dans un congrès hal-03909279v1
	Damage tolerance analysis of impacted composite structures subjected to multiaxial loadings Joël Serra , Antoine Trellu , Christophe Bouvet , Samuel Rivallant , Bruno Castanié 2nd European Conference on Crashworthiness of Composite Structures ECCCS2, Nov 2022, Toulouse, France Communication dans un congrès hal-03909290v1
	EFFECT OF PROCESS PARAMETERS ON IMPACT ON COMPOSITES AND COMPRESSION AFTER IMPACT Florentin Berthet , Alvine Njionhou , Bruno Castanié , Christophe Bouvet ECCCS 2022 - 2nd European Conference on Crashworthiness of Composite Structures, Nov 2022, Toulouse, France Communication dans un congrès hal-03869022v1
	Effect of release agent on process-induced deformation in autoclave curing of laminate composites Bruno Castanié , Lerdwongpaisan Arnon , Philippe Olivier 20th European Conference on Composite Materials (ECCM20),, Jun 2022, Lausanne, Switzerland. 8 p Communication dans un congrès hal-03859825v1
	Static and dynamic crushing of sandwich tubes with a birch core and carbon skins Romain Guélou , Florent Eyma , Samuel Rivallant , Bruno Castanié , Arthur Cantarel 20th European Conference on Composite Materials (ECCM20), Jun 2022, Lausanne, Switzerland. 6 p Communication dans un congrès hal-03859853v1
	Wood as a structural material for transportation industry: Past example and recent advances Bruno Castanié , Romain Guélou , Arthur Cantarel , Samuel Rivallant , Florent Eyma 24th International Conference on Composite Structures Faculty of Engineering, University of Porto, Portugal, Jun 2021, Porto, Portugal Communication dans un congrès hal-03407651v1
	Experimental Study on the Out-of-Plane Deformation of Symmetrical Flat Laminate Composites Manufactured through Autoclave Process Lerdwongpaisan Arnon , Bruno Castanié , Philippe Olivier 24th International Conference on Composite Structures (ICCS24) Faculty of Engineering, University of Porto, Portugal, Jun 2021, Porto, Portugal Communication dans un congrès hal-03407609v1
	From small coupons to mid-scale impacted specimens, how to predict laminate failure? Joël Serra , Antoine Trellu , Guillaume Pichon , Christophe Bouvet , Samuel Rivallant 10th International Conference on Composites Testing and Model Identification, May 2021, Lille, France Communication dans un congrès hal-03909317v1
	Analyse du flambage local des structures sandwich appliqué aux avions légers Ginot Malo , Bruno Castanié , Christophe Bouvet , Mahuet Nicolas JNC 22 – Conférence virtuelle – 28 - 30 juin 2021, Jun 2021, Besancon, France Communication dans un congrès hal-03286681v1
	Etude de l'influence d'ondulations hors-plan sur la rupture d'une cornière sous sollicitation de flexion quatre points Pierre Journoud , Bruno Castanié , Christophe Bouvet , Léon Ratsifandrihana JNC 22 (22es Journées Nationales sur les Composites ), Jun 2021, Besançon ( Conférence virtuelle ), France Communication dans un congrès hal-03286691v1
	Structural testing of large notched composite specimens under combined shear and pressure Florent Grotto , Joël Serra , Christophe Bouvet , Bruno Castanié 24th International Conference on Composite Structures Faculty of Engineering, University of Porto, Portugal, Jun 2021, Porto, Portugal Communication dans un congrès hal-03407636v1
	Essais structurels de grandes plaques composites entaillées sous cisaillement et pression combinés Florent Grotto , Joel Serra , Christophe Bouvet , Bruno Castanié JNC 22 – Conférence virtuelle – 28 - 30 juin 2021, Jun 2021, Besancon, France Communication dans un congrès hal-03286686v1
	On the efficiency of some analytic wrinkling models Bruno Castanié , Malo Ginot , Christophe Bouvet 24th International Conference on Composite Structures Faculty of Engineering, University of Porto, Portugal, Jun 2021, Porto, Portugal Communication dans un congrès hal-03407671v1
	Failure simulation of four point bending CFRP laminate specimen including wrinkles Bruno Castanié , Pierre Journoud , Christophe Bouvet , Léon Ratsifandrihana 24th International Conference on Composite Structures Faculty of Engineering, University of Porto, Portugal, Jun 2021, Porto, Portugal Communication dans un congrès hal-03407665v1
	Caractérisation de tubes sandwichs bois-carbone pour des applications de crash Romain Guélou , Florent Eyma , Arthur Cantarel , Bruno Castanié , Samuel Rivallant JNC 22 – Conférence virtuelle – 28 - 30 juin 2021, Jun 2021, Besancon, France Communication dans un congrès hal-03286689v1
	Insert sizing of sandwich panels by means of a failure mode map Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet MECHCOMP 5 International Conference on Mechanics of Composites 5, Lisboa, 1 - 4 July 2019, Jul 2019, Lisboa, Portugal Communication dans un congrès hal-02044394v1
	Large damage tolerance analysis with the VERTEX multiaxial test rig Joël Serra , Christophe Bouvet , Bruno Castanié New Trends in Fatigue and Fracture, Oct 2019, Tucson, United States Communication dans un congrès hal-02472363v1
	Développement et caractérisation d'éco-structures composites à base de bois Romain Guélou , Florent Eyma , Arthur Cantarel , Bruno Castanié , Christophe Bouvet 21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France Communication dans un congrès hal-02421456v1
	Implementation of a Simulation Tool of Strains Induced During the Co-bonding of Autoclave-cured Parts Philippe Olivier , Laure Moretti , Bruno Castanié , Léonard Serrano , Gérard Bernhart ASC 2019 - 34th Technical Conference of the American Society for Composites, Oct 2019, Atlanta, United States. ⟨10.12783/asc34/31293⟩ Communication dans un congrès hal-02906323v1
	Mise en place d'un outil de simulation des déformations induites lors du co-collage de pièces composites en autoclave Laure Moretti , Bruno Castanié , Gérard Bernhart , Léonard Serrano , Philippe Olivier JNC21 : Journées Nationales sur les Composites 2019, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. 10 p Communication dans un congrès hal-02420729v1
	Continuum Damage Modeling of Shear Postbuckling in Honeycomb Core Juan de Dios Rodriguez , Bruno Castanié , Christophe Bouvet ICMAMS 2018 First International Conference on Mechanics of Advanced Materials and Structures, Jun 2018, Torino, Italy Communication dans un congrès hal-02133965v1
	Analysis of the influence of the adhesive on process distortions of the co-bonded stringer foot specimens Laure Moretti , Gilles Dusserre , Bruno Castanié , Philippe Olivier ECCM18 - 18th European Conference on Composite Materials, Jun 2018, Athènes, Greece. 8 p Communication dans un congrès hal-01867828v1
	Validation of aeronautic structures by single multiaxial testing Joël Serra , Jean-Emmanuel Pierré , Jean-Noël Périé , Jean-Charles Passieux , Christophe Bouvet ECCM18 - European Conference on Composite Materials, Jun 2018, Athens, Greece Communication dans un congrès hal-02454556v1
	Caractéristiques des surfaces du bois poncé pour une finition performante et durable Miora Ramanakoto , Florent Eyma , Tahiana Ramananantoandro , Jeremy Geisler , Bruno Castanié MUGV & Manuf'21, Jun 2018, Bordeaux, France Communication dans un congrès hal-02139594v1
	WOOD-BASED COMPOSITE SANDWICH STRUCTURES John Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Bruno Castanié ECCM18 - 18th European Conference on Composite Materials, Jun 2018, Athènes, Greece. pp.24 - 28 Communication dans un congrès hal-02133948v1
	Virtual testing of metallic inserts for sandwich structures Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet 18th European Conference on Composite Materials (ECCM 18), Jun 2018, Athens, Greece Communication dans un congrès hal-02133941v1
	Shear nonlinear behavior of the Nomex honeycomb core Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet 12th International Conference on Sandwich Structures (ICSS-12), Aug 2018, Lausanne, Switzerland Communication dans un congrès hal-02133918v1
	Experimental and numerical analysis of notched CFRP composites under multiaxial loadings Joël Serra , Jean-Emmanuel Pierré , Jean-Noël Périé , Jean-Charles Passieux , Christophe Bouvet ICCS20 - 20th International Conference on Composite Structures, Sep 2017, Paris, France Communication dans un congrès hal-02454562v1
	Analysis of nonlinear behavior on honeycomb cores Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet 21st International Conference on Composite Materials ( ICCM 21 ), Aug 2017, Xi’an, China Communication dans un congrès hal-02177061v1
	A NEW PRE-DESIGN METHODOLOGY FOR INNOVATIVE COMPOSITE STRUCTURES Florian Neveu , Bruno Castanié , Philippe Olivier International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, 2017, Xi'an, China Communication dans un congrès hal-02044391v1
	DISCRETE PLY MODELLING OF NOTCHED CFRP PLATES UNDER TENSION Joël Serra , Christophe Bouvet , Bruno Castanié , C. Petiot International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, 2017, Xi'an, China Communication dans un congrès hal-02044392v1
	Finishing of wood machined surfaces. Which characteristics for which performance? M. Ramanakoto , Florent Eyma , T. Ramananantoandro , J. Geisler , Bruno Castanié 23rd International Wood Machining Seminar, 2017, Québec, Canada Communication dans un congrès hal-02052448v1
	Shear testing of honeycomb cores for inserts Juan de Dios Rodriguez-Ramirez , Bruno Castanié , Christophe Bouvet International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017, 2017, Paris, France Communication dans un congrès hal-02044382v1
	Etude expérimentale et numérique de la propagation de coupure dans des stratifiés composites soumis à de la traction simple Joël Serra , Christophe Bouvet , Bruno Castanié , Caroline Petiot 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01926728v1
	Discrete modeling strategies for aeronautic composite structures: from failure scenario to certification Bruno Castanié International Conference on composite Structures (ICCS 20), Paris, 4-8 septembre 2017, 2017, Paris, France Communication dans un congrès hal-02024373v1
	Sur le dialogue essais-calcul dans les essais structuraux complexes Joël Serra , Jean-Emmanuel Pierré , Jean-Noël Périé , Jean-Charles Passieux , Christophe Bouvet 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01926867v1
	Nouvelle méthodologie de conception pour les structures composites Florian Neveu , Bruno Castanié , Philippe Olivier Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France Communication dans un congrès hal-01623257v1
	The VERTEX program: complex loading and validation of aeronautic composite structures Joël Serra , J.-E. Pierré , Jean-Charles Passieux , Jean-Noël Périé , Christophe Bouvet International Conference of Composite Materials (ICCM 21),Xi'an China, August 20-25, 2017, Xi'an, China Communication dans un congrès hal-02044393v1
	Modélisation d'essais structuraux sur plaques entaillées Joël Serra , Jean-Emmanuel Pierré , Jean-Noël Périé , Jean-Charles Passieux , Christophe Bouvet Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France Communication dans un congrès hal-01623260v1
	Safety failure envelops to validate composite structure Bruno Castanié Proceedings of ICCS19 19th International Conference on Composite Structures, 2016, Porto, Portugal Communication dans un congrès hal-02047918v1
	Enhanced nonlinear insert model Juan de Dios Rodriguez-Ramirez , Christophe Bouvet , Bruno Castanié , Mathieu Deloubes , Jean-Paul Giavarini 19th International Conference on Composite structures, Sep 2016, Porto, Portugal Communication dans un congrès hal-02179268v1
	POST-IMPACT BEHAVIOR OF INSERT IN SANDWICH STRUCTURES S. Dols , Christophe Bouvet , Bruno Castanié , L. Mezeix , J.-P. Giavarinni 11th International Conference on Sandwich Structures ICSS-11, 2016, Florida, United States Communication dans un congrès hal-02048650v1
	Experimental investigation on impact behaviour of wood-based sandwich structures J.P. Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Bruno Castanié Proceedings of 1st International Conference on Impact Loading of Structures and Materials (ICILSM 2016), 2016, Turin, Italy Communication dans un congrès hal-02048286v1
	Scaling effect in notched composites: the Discrete Ply Model approach Joël Serra , Christophe Bouvet , Bruno Castanié , Caroline Petiot ECCM17 - European Conference on Composite Materials, Jun 2016, Munich, Germany Communication dans un congrès hal-02454601v1
	IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES John Susainathan , Florent Eyma , Emmanuel de Luycker , Arthur Cantarel , Bruno Castanié International Conference on Sandwich Structures, Mar 2016, Floride, United States Communication dans un congrès hal-02139593v1
	Dynamic bending-twisting coupling of an horizontally graded CFRP sandwich beam L. Bernard , Bruno Castanié , Guilhem Michon 11th International Conference on Sandwich Structures ICSS-11, 2016, Florida, United States Communication dans un congrès hal-02048649v1
	COMPOSITE STRUCTURES IN AERONAUTICS: PAST, PRESENT AND FUTURE Bruno Castanié The 5th Burapha University International Conference 2016, July 28-29, Pattaya, Thailand,, 2016, Pattaya, Thailand Communication dans un congrès hal-02047980v1
	Comportement en matage de stratifiés quasi-isotropes à renforts tissés ou quasi-UD. C. Sola , Laurent Michel , Frederic Lachaud , Bruno Castanié , A. Delabie JNC 19, Journées Nationales sur les Composites, Lyon, 29 Juin-1er juillet2013 2015, 2015, Lyon, France Communication dans un congrès hal-02051998v1
	Digital Image Correlation and Thermography analysis of notched CFRP under tension Bruno Castanié , Christophe Bouvet , C. Petiot , Joël Serra ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015, 2015, Porto, Portugal Communication dans un congrès hal-02052191v1
	BEARING RESPONSE OF CFRPs : COMPARATIVE STUDY OF WOVEN AND UD FABRIC QUASI ISOTROPIC LAMINATES UNDER STATIC AND FATIGUE LOAD C. Sola , Laurent Michel , Frederic Lachaud , Bruno Castanié , A. Delabie Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, 2015, Porto, Portugal Communication dans un congrès hal-02052195v1
	Modélisation Discrète de la Rupture des Stratifiés Composites Trouée Carbone V. Achard , Christophe Bouvet , Bruno Castanié 22éme Congrés francais de mécanique, Lyon 24-28 Aout 2015, 2015, Lyon, France Communication dans un congrès hal-02051914v1
	Discrete ply modelling of failure scenario of open-hole tensile test V. Achard , Christophe Bouvet , Bruno Castanié Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, 2015, Porto, Portugal Communication dans un congrès hal-02052194v1
	Calcul des inserts de structures sandwichs : état de l'art et perspectives. Bruno Castanié , J.D.D. Rodriguez Ramirez , Christophe Bouvet , J.-P. Giavarini Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca Saint-Ouen, 2015, Saint-Ouen, France Communication dans un congrès hal-02051999v1
	Application de la méthode de modélisation discrète des plis aux problématiques d'arrachement et de rupture trouée des structures stratifiées. Bruno Castanié , Alain Daidié , Christophe Bouvet , Victor Achard , Louis Adam Les assemblages mécaniques : Evolutions récentes et perspectives. 1 et 2 juillet 2015, Supméca, Saint-Ouen, France, 2015, Saint-Ouen, France Communication dans un congrès hal-02052000v1
	THE VERTEX PROJECT: COMPLEX LOADING ANALYSIS AND VALIDATION OF COMPOSITE STRUCTURES Bruno Castanié Proceedings of ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015 2015, 2015, Porto, Portugal Communication dans un congrès hal-02052193v1
	Wood surfaces characteristics for an acceptable bonding strength M. Ramanakoto , Florent Eyma , T. Ramanantoandro , Philippe Gallien , Bruno Castanié 22th International Wood Machining Seminar, 2015, Québec, Canada Communication dans un congrès hal-02052458v1
	Analyse Dynamique et Statique du Couplage Flexion-Torsion d’une Poutre Sandwich L. Bernard , Guilhem Michon , Bruno Castanié , R. El Fatmi , V. Negre JNC 19, Journées Nationales sur les Composites, Lyon, France, 2015, Lyon, France Communication dans un congrès hal-02051997v1
	Spring-back Prediction of CRFP Composite Laminate Ribs Y. Aminanda , K. Mansur Ali , M. Nasir , M. Nazreen , A. Rivai Conference on Advances in Composite Materials and Structures, Istanbul, April 2015, 2015, Istanbul, Turkey Communication dans un congrès hal-02052449v1
	Discrete Ply Modelling analysis of notched CFRP under tension Bruno Castanié , Christophe Bouvet , C. Petiot , Joël Serra ICCS18 - 18th International Conference on Composite Structures, Porto, June 15-17 2015, 2015, Porto, Portugal Communication dans un congrès hal-02052192v1
	Spring-back prediction through numerical simulation for composite manufacturing using autoclave process L. Mezeix , M.N. Nasir , L. Aminanda , A. Rivai , Bruno Castanié Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, 2014, Harbin, China Communication dans un congrès hal-02053995v1
	Experimental and analytical study of flat laminate composite spring-back manufactured through autoclave process S. Adam , L. Mezeix , A. Rivai , Y. Aminanda , Philippe Olivier Computational and experimental methods for composite materials and structures, Harbin (China), September 2014, 2014, Harbin, China Communication dans un congrès hal-02053906v1
	Failure analysis of open hole tensile specimens with discrete ply modelling V. Achard , Christophe Bouvet , Bruno Castanié , C. Chirol International Symposium on Dynamic Response and Failure of Composite Materials, Draf 2014, Ischia (Italy), 2014, Ischia, Italy Communication dans un congrès hal-02053996v1
	Couplage Aéroélastique Flexion-Torsion de Pale d’Hélicoptère L. Bernard , D. Cornette , V. Nègre , B. Kerdreux , Bruno Castanié ViSHNO XIXth - VIbrations SHocks and NOise (Aix en Provence, Fr), 2014, Aix en Provence, France Communication dans un congrès hal-02054262v1
	Discrete ply modelling of impact and compression after impact on composite laminates Christophe Bouvet , Samuel Rivallant , J.-J. Barrau , N. Hongkarnjanakul , Bruno Castanié Workshop « New modelling strategies of damage and failure of composites structures: a breakthrough in composite sizing », Toulouse, France, 30 June - 1 July, 2014, Toulouse, France Communication dans un congrès hal-02053448v1
	Influence géométrique de la présence de fils de couture sur la perméabilité d'un stratifié Florentin Berthet , Alvine Njionhou Kepnang , Bruno Castanié JNC 18 - 18èmes Journées Nationales sur les Composites, Jun 2013, Nantes, France. 9 p Communication dans un congrès hal-01745521v1
	Impact et tenue résiduelle des inserts de structures sandwichs S. Dols , Christophe Bouvet , Bruno Castanié , L. Mezeix , J.-P. Giavarini JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013, 2013, Nantes, France Communication dans un congrès hal-02183455v1
	Décomposition de domaine et réduction de modèle: stratégie de résolution pour le post-flambement local des structures raidies Ludovic Barrière , Steven Marguet , Philippe Cresta , Bruno Castanié , Jean-Charles Passieux 11e colloque national en calcul des structures, CSMA, May 2013, Giens, France Communication dans un congrès hal-01717836v1
	Experimental analysis of impact and pull-through after impact in insert in sandwich structures S. Dols , Christophe Bouvet , Bruno Castanié , L. Mezeix , J.-P. Giavarini 16th International Conference on Composite Structures, ICCS 16, Porto, June 17-20, 2013, 2013, Porto, Portugal Communication dans un congrès hal-02183454v1
	Modeling strategies for postbuckilig of large stiffened structures L. Barrière , Steven Marguet , Jean-Charles Passieux , Bruno Castanié , P. Cresta ICCS 16, Intenational Conference on Composite Structure, June 17-20, 2013, Porto, Portugal Communication dans un congrès hal-02059343v1
	Etude expérimentale de l'influence des paramètres de coupe et de l'usure de l'outil sur la qualité de percage d'un composite tissé 3D. N. Cadorin , Redouane Zitoune , Bruno Castanié , Francis Collombet , M. Seve JNC 18, Journées Nationales sur les composites, Nantes, 12-14 Juin 2013, 2013, Nantes, France Communication dans un congrès hal-02183456v1
	Offset Failure in Filled Hole Compression Tests Bruno Castanié , S. Crézé , J.-J. Barrau , L. Risse 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2., 2013, Montréal, Canada Communication dans un congrès hal-02183343v1
	Influence of trimming process on the surface quality and on the mechanical behavior of CFRP structures. M. Haddad , Redouane Zitoune , H. Bougherara , Florent Eyma , Bruno Castanié 19th International Conference on Composite Materials., 2013, Montréal, Canada Communication dans un congrès hal-02183244v1
	Influence of cutting parameters and wear in drilling of 3D wowen carbon/epoxy composite N. Cadorin , Redouane Zitoune , Francis Collombet , Bruno Castanié , M. Seve 19th International Conference on Composite Materials, ICCM 19, 2013 Montréal, Canada, July 28, August 2, 2013, Montréal, Canada Communication dans un congrès hal-02183342v1
	Influence du procédé d'usinage sur l'usinabilité et le comportement mécanique de pièces composites M. Haddad , Redouane Zitoune , Florent Eyma , Bruno Castanié JNC 18, Journées Nationales sur les Composites, Nantes, 12-14 Juin 2013, 2013, Nantes, France Communication dans un congrès hal-02183457v1
	Modelling Of Impact On Sandwich Structure For Fast Maintenance Loops Bruno Castanié , Y. Aminanda , C. Schwob ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012., 2012, Brisbane, Australia Communication dans un congrès hal-02186308v1
	Nonlinear Response of Symmetric Sandwich structures Subjected to in-plane loads Bruno Castanié , Jean-François Ferrero ICSS 10, 10th International Conference On Sandwich Structures. Nantes, France, 27-29 August 2012, 2012, Nantes, France Communication dans un congrès hal-02187103v1
	Effect of Machining Parameters on high speed trimming of CFRP M. Haddad , Redouane Zitoune , Florent Eyma , Bruno Castanié 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 2012, Venice, Italy Communication dans un congrès hal-02186859v1
	A Computational Strategy For Post-buckling Analysis Of Large Stiffened Structures L. Barrière , Steven Marguet , Bruno Castanié , P. Cresta ICAS 2012, 28th International Congress Of The Aeronautical Sciences. Brisbane, Australia, 24-28 September 2012, 2012, Brisbane, Australia Communication dans un congrès hal-02186309v1
	Influence de l'état de surface du trou après perçage sur le comportement en matage de matériaux composite à fibres de carbone unidirectionnelles et résine en époxy Soraya Catché , Robert Piquet , Frederic Lachaud , Bruno Castanié , A. Bénaben 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.97 Communication dans un congrès hal-00598141v1
	Modélisation par éléments cohésifs de l'essai d'arrachement de fixations dans un stratifié Louis Adam , Christophe Bouvet , Bruno Castanié , Alain Daidié , Elodie Bonhomme 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.22 Communication dans un congrès hal-00597885v1
	Etude du comportement à l'impact et en compression après impact des stratifiés infusés cousus et non-cousus K. Alvine Njionhou , Florentin Berthet , Bruno Castanié , Christophe Bouvet 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.32 Communication dans un congrès hal-00597896v1
	Relation between surface roughness indicators and static strengh of drilled laminates S. Catche , R. Piquet , Frederic Lachaud , Bruno Castanié , A. Benaben 15th International Conference on Composite Structures, ICCS 16, Porto, June 28-30, 2011, Porto, Portugal Communication dans un congrès hal-02187953v1
	Recent advances on aeronautique structures Bruno Castanié International Conference on Mechanical, Automotive and Aerospace Engineering 2011,ICMAAE '11, Kuala-Lumpur, May 17-19, 2011., 2011, Kuala-Lumpur, Malaysia Communication dans un congrès hal-02191453v1
	Experimental and numerical analysis of pull-through of fasteners in laminates L. Adam , Christophe Bouvet , Bruno Castanié , Alain Daidié , E. Bonhomme ICCS16, Porto (Portugal), 28-30 juin, 2011, Porto, Portugal Communication dans un congrès hal-02188028v1
	Relationships between process parameters and mechanical properties of laminated plates made by L.R.I. Alvine Njionhou Kepnang , Florentin Berthet , Bruno Castanié FPCM 10 -10th International conference on Flow Processes in Composite Materials, Jul 2010, Monte Verita, Switzerland. 9 p Communication dans un congrès hal-01764783v1
	Explicit simulation and high-performance computing, application to a bolt tensile test L. Adam , Alain Daidié , Bruno Castanié , E. Bonhomme IDMME-Virtual Concept 2010, Bordeaux, France, 2010, Bordeaux, France Communication dans un congrès hal-02193365v1
	Experimental Analysis of Composite Structures Debonding under Cyclic Loading A. Abbadi , Laurent Michel , Bruno Castanié ICCE-18 Anchorage, Alaska,USA, July 4-10, 2010, 2010, Alaska, United States Communication dans un congrès hal-02193466v1
	Composites NCF carbone epoxy infusés : matériaux -procédés -propriétés Florentin Berthet , Alvine Njionhou Kepnang , Bruno Castanié Matériaux 2010, Oct 2010, Nantes, France. 11 p Communication dans un congrès hal-01771350v1
	A New Sandwich Structured Composite With Entangled Carbon Fibres As Core Material: Processing And Mechanical Properties L. Mézeix , Dominique Poquillon , Christophe Bouvet , Bruno Castanié Icss 9, Pasadena, California, June 14-16, 2010, California, United States Communication dans un congrès hal-02193477v1
	Parameters affecting mechanical properties of composite manufactured by liquid resin infusion (LRI) Alvine Njionhou Kepnang , Florentin Berthet , Bruno Castanié ICCM 17 -17th International Conference on Composite Materials, Jul 2009, Edinburg, United Kingdom. 10 p Communication dans un congrès hal-01764792v1
	Analyse multi-niveau de jonctions économiques par cloutage = Multi-level analysis of low-cost Z-pinned junctions Javier Toral , Bruno Castanié , Jean-Jacques Barrau , Sébastien Didierjean JNC16, Jun 2009, Toulouse, France. 10 p Communication dans un congrès hal-00429567v1
	experimental analysis of pull-out strength of z-pins and screws in carbon-epoxy laminate J. Bertolini , Bruno Castanié , J.-J. Barrau , J.-P. Navarro 15th International Conference on Composite Structures, ICCS 15, Porto, June 15-17, 2009., 2009, Porto, Portugal Communication dans un congrès hal-02194561v1

	Collage et finition des surfaces bois usinées. Quelles caractéristiques pour quelles performances? M. Ramanakoto , Florent Eyma , T. Ramananantoandro , J. Geisler , Bruno Castanié 5èmes Journées scientifiques du GDR 3544 Sciences du bois, 2016, Bordeaux, France Poster de conférence hal-02057323v1
	Caractérisation de l'état de surface du bois usinée pour un collage acceptable M. Ramanakoto , T. Ramananantoandro , J. Geisler , Bruno Castanié , Florent Eyma 4èmes Journées scientifiques du GDR 3544 Sciences du bois, 2015, Clermont Ferrand, France Poster de conférence hal-02057695v1
	Calcul des inserts de structures sandwichs : état de l'art et perspectives Bruno Castanié , Juan de Dios Rodriguez-Ramirez , Christophe Bouvet , Jean-Paul Giavarini SUPMECA Assemblages mécaniques - Evolutions récentes et perspectives 2015, Jul 2015, Saint-Ouen, France Poster de conférence hal-02177040v1
	Analyse du comportement en traction de stratifiés composites entaillés en utilisant la corrélation d'images ainsi que le suivi infrarouge Bruno Castanié , Christophe Bouvet , C. Petiot , Joël Serra Journées Nationales sur les Composites 2015, 2015, Villeurbanne, France Poster de conférence hal-02057722v1
	Adaptive Model Reduction for Local Post-Buckling Analysis L. Barrière , Jean-Charles Passieux , Steven Marguet , Bruno Castanié , P. Cresta 2nd International Workshop on Reduced Basis, POD and PGD model (Blois, Fr), 2013, Blois, France. 2013 Poster de conférence hal-02183553v1

	Structures en Matériaux Composites Stratifiés Bruno Castanié , Christophe Bouvet , D. Guedra-Degeorges Techniques de l'Ingénieur, 2013 Ouvrages hal-02183464v1
	Recent advances in dynamic failure of composite and sandwich structures S. Abrate , Bruno Castanié , Y. Rajapakse Abrate, S. and Castanié, B. and Rajapakse, Y. Springer, 2012 Ouvrages hal-02185682v1

	Influence of Tool Geometry and Machining Parameters on the Surface Quality and the Effect of Surface Quality on Compressive Strength of Carbon Fibre Reinforced Plastic M. Haddad , Redouane Zitoune , Florent Eyma , Bruno Castanié Materials Science Forum - Vol 763, Trans Tech Publications, Switzerland, 2013 Chapitre d'ouvrage hal-02183466v1
	Discrete Modeling of the Crushing of Nomex Honeycomb Core and Application to Impact and Post-impact Behavior of Sandwich Structures Bruno Castanié , Yulfian Aminanda , Jean-Jacques Barrau , Pascal Thevenet Abrate S.; Castanié B.; Rajapakse Y. Dynamic Failure of Composite and Sandwich Structures, 192, 2013, 978-94-007-5329-7 Chapitre d'ouvrage hal-01654038v1

Bruno CASTANIÉ

Publications

Multiaxial loading of aeronautic composite structures at intermediate scale: A review of VERTEX developments

Wood and Plywood as eco-materials for sustainable mobility:a review

Characterization of mode II delamination behaviour of poplar plywood and LVL

Design and Testing of Impacted Stiffened CFRP Panels under Compression with the VERTEX Test Rig

Effect of defects combined with impact damage on compressive residual strength in curved CFRP specimen

Mode I delamination R-Curve in poplar laminated veneer lumber

Experimental behaviour of aeronautical notched carbon fibre reinforced thermoplastic panels under combined tension-shear-pressure loadings

Local buckling on large sandwich panels applied to light aviation: Experimental and computation dialogue

Static and dynamic crushing of sandwich tubes with composite skins and three plywood cores (poplar, birch, and oak)

Local buckling on large sandwich panels used in light aviation

Experimental and numerical compressive tests on curved laminate structures with embedded wrinkles

A comparison of three wood species (poplar, birch and oak) for crash application

Experimental analysis of the effects of wrinkles in the radius of curvature of L-shaped carbon-epoxy specimens on unfolding failure

Numerical analysis of the effects of wrinkles in the radius of curvature of L-shaped CFRP specimens on unfolding failure

Manufacturing and impact behaviour of aeronautic overmolded grid-stiffened thermoplastic carbon plates

Dynamic crushing of wood-based sandwich composite tubes

Static crushing of wood based sandwich composite tubes

Crashworthiness of poplar wood veneer tubes

Benchmark of wrinkling formulae and methods for pre-sizing of aircraft lightweight sandwich structures

Experimental study and in-situ FBG monitoring of process-induced strains during autoclave co-curing, co-bonding and secondary bonding of composite laminates

Combined loadings after medium velocity impact on large CFRP laminated plates: Discrete ply model simulations

Review of composite sandwich structure in aeronautic applications

On the potting failure of inserts for sandwich panels: Review of defects and experimental analysis

Damage Mechanics Modelling of the shear nonlinear behavior of Nomex honeycomb core. Application to sandwich beams

Effect of milled notches on the strength of open hole, filled holes, single and double lap shear CFRP tension coupons

Characterization and modelling of cure-dependent properties and strains during composites manufacturing

Insert of sandwich panels sizing through a failure mode map

Effective Static and Dynamic Finite Element Modeling of a Double Swept Composite Rotor Blade

Combined loadings after medium velocity impact on large CFRP laminate plates: Tests and enhanced computation/testing dialogue

Visuo-tactile and topographic characterizations of finished wood surface quality by French consumers and industrials: acceptability thresholds for raised grain

Experimental analysis of impact and post-impact behaviour of inserts in Carbon sandwich structures

The GAP methodology: A new way to design composite structures

Experimental and numerical analysis of unfolding failure of L-shaped CFRP specimens

Experimental investigation of compression and compression after impact of wood-based sandwich structures

Numerical modeling of impact on wood-based sandwich structures

An aeronautics and space-oriented research group

Experimental and numerical analysis of the shear nonlinear behaviour of Nomex honeycomb core: Application to insert sizing

Experimental investigation of impact behavior of wood-based sandwich structures

Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 2: Load envelopes for the assessment of panels with large notches

Bearing fatigue of composite laminates: Damage monitoring and fatigue life prediction

Manufacturing and quasi-static bending behavior of wood-based sandwich structures.

Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading

Spring-in prediction for carbon/epoxy aerospace composite structure

Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures

Static and dynamic analysis of bending–torsion coupling of a CFRP sandwich beam

Scaling effect in notched composites: The Discrete Ply Model approach

On the role of kinking in the bearing failure of composite laminates

Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites

Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates

Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process

Tolérance aux dommages de perçages dans les assemblages boulonnés composites

Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range

Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior

Discrete ply modelling of open hole tensile tests

Experimental Analysis of Debonding of Skin/Stringer Interfaces under Cyclic Loading and Ageing

Perçage d’un matériau composite tissé 3D : Influence des conditions d’usinage et de l’usure de l’outil sur les efforts de coupe et la qualité d’usinage

Machinability and surface quality during high speed trimming of multi directional CFRP

An adaptive model reduction strategy for post-buckling analysis of stiffened structures

Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven

Application of high-performance computing to a bolt static tensile test

Discrete ply model of circular pull-through test of fasteners in laminates

Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates

Multi-level analysis of low-cost Z-pinned composite joints: Part 2 : Joint Behavior

MULTI-LEVEL ANALYSIS OF LOW-COST Z-PINNED COMPOSITE JUNCTIONS. PART 1 : SINGLE Z-PIN BEHAVIOR

EXPERIMENTAL ANALYSIS OF FAILURES IN FILLED HOLE COMPRESSION TESTS OF CARBON/EPOXY LAMINATE

Optimisation de la résistance au cisaillement interlaminaire (RCIL) des matériaux composites fabriqués par LRI en fonction des paramètres de fabrication

Multi-level experimental and numerical analysis of composite stiffener debonding. Part 1: Non-specific specimen level

Multi-level experimental and numerical analysis of composite stiffener debonding. Part 2: Element and panel level

Experimental and numerical study of compression after impact of sandwichs structures with metallic skins

Experimental and numerical study of compression after impact of sandwich structures with metallic skins

Low velocity impact modelling in laminate composite panels with discrete interface elements

CORE CRUSH CRITERION TO DETERMINE THE STRENGTH OF SANDWICH COMPOSITE STRUCTURES SUBJECTED TO COM-PRESSION AFTER IMPACT

Non-linear finite element analysis of inserts in composite sandwich structures

An experimental and numerical study on omega stringer debonding

Modelling of low energy/low velocity impact on Nomex honeycomb sandwich structures with metallic skins

Buckling and post-buckling of beams with flat webs

Experimental and Numerical Analysis of Inserts in Sandwich Structures

Experimental Analysis and Modeling of the Crushing of Honeycomb Cores