Accéder directement au contenu
Nombre de documents

73

Liste de Publication


Article dans une revue30 documents

  • Grégoire Corre, Arthur Lebée, Karam Sab, Mohammed Khalil Ferradi, Xavier Cespedes. A new higher-order elastoplastic beam model for reinforced concrete. Meccanica, Springer Verlag, 2020, 55 (4), pp.791-813. ⟨10.1007/s11012-019-01003-5⟩. ⟨hal-02886351⟩
  • Olivier Perret, Cyril Douthe, Arthur Lebée, Karam Sab. A shear strength criterion for the buckling analysis of CLT walls. Engineering Structures, Elsevier, 2020, 211, pp.110344. ⟨10.1016/j.engstruct.2020.110344⟩. ⟨hal-02523678⟩
  • Pierre Margerit, Arthur Lebée, Jean-François Caron, Kerem Ege, Xavier Boutillon. The High-Resolution Wavevector Analysis for the characterization of the dynamic response of composite plates. Journal of Sound and Vibration, Elsevier, 2019, 458, pp.177-196. ⟨10.1016/j.jsv.2019.06.026⟩. ⟨hal-02162864⟩
  • Olivier Perret, Arthur Lebée, Cyril Douthe, Karam Sab. Equivalent stiffness of timber used in CLT: closed-form estimates and numerical validation. European Journal of Wood and Wood Products, Springer Verlag, 2019, ⟨10.1007/s00107-019-01395-x⟩. ⟨hal-02055968⟩
  • Ricardo Maia Avelino, Olivier Baverel, Arthur Lebée. Design Strategies for Gridshells with Singularities. Journal of the International Association for Shell and Spatial Structures, International Association for Shell and Spatial Structures, 2019, 60 (3), pp.189-200. ⟨10.20898/j.iass.2019.201.023⟩. ⟨hal-02888490⟩
  • Grégoire Corre, Arthur Lebée, Karam Sab, Mohammed Khalil Ferradi, Xavier Cespedes. The Asymptotic Expansion Load Decomposition elasto-plastic beam model. International Journal for Numerical Methods in Engineering, Wiley, 2018, ⟨10.1002/nme.5926⟩. ⟨hal-01830425⟩
  • Grégoire Corre, Arthur Lebée, Karam Sab, Mohammed Ferradi, Xavier Cespedes. Higher-order beam model with eigenstrains: theory and illustrations. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, Wiley-VCH Verlag, 2018, ⟨10.1002/zamm.201700180⟩. ⟨hal-01709881⟩
  • Olivier Perret, Arthur Lebée, Cyril Douthe, Karam Sab. Experimental determination of the equivalent-layer shear stiffness of CLT through four-point bending of sandwich beams. Construction and Building Materials, Elsevier, 2018, 186, pp.1132-1143. ⟨10.1016/j.conbuildmat.2018.07.102⟩. ⟨hal-01978755⟩
  • Arthur Lebée, Gilles Forêt, Florent Lyon, Lorenzo Franzoni. Closed-form solutions for predicting the thick elastic plate behavior of CLT and timber panels with gaps. Engineering Structures, Elsevier, 2018, 164, pp.290-304. ⟨10.1016/j.engstruct.2018.02.073⟩. ⟨hal-01978742⟩
  • Pierre Margerit, Arthur Lebée, Jean-François Caron, Xavier Boutillon. High-Resolution Wavenumber Analysis (HRWA) for the mechanical characterization of viscoelastic beams. Journal of Sound and Vibration, Elsevier, 2018, 443, pp.198-211. ⟨10.1016/j.jsv.2018.06.062⟩. ⟨hal-01825733⟩
  • Tulio Honorio, Laurent Brochard, Matthieu Vandamme, Arthur Lebée. Flexibility of nanolayers and stacks: implications in the nanostructuration of clays. Soft Matter, Royal Society of Chemistry, 2018, 14 (36), pp.7354 - 7367. ⟨10.1039/C8SM01359D⟩. ⟨hal-01896675⟩
  • Nadine Bejjani, Karam Sab, Joanna Bodgi, Arthur Lebée. The Bending-Gradient Theory for Thick Plates: Existence and Uniqueness Results. Journal of Elasticity, Springer Verlag, 2018, ⟨10.1007/s10659-017-9669-7⟩. ⟨hal-01698051⟩
  • Arthur Lebée, Karam Sab. On the Generalization of Reissner Plate Theory to Laminated Plates, Part II: Comparison with the Bending-Gradient Theory. Journal of Elasticity, Springer Verlag, 2017, 126 (1), pp.67 - 94. ⟨10.1007/s10659-016-9580-7⟩. ⟨hal-01691087⟩
  • Lorenzo Franzoni, Dhionis Dhima, Florent Lyon, Arthur Lebée, Gilles Forêt. A Stiffness-based Approach to Analyze the Fire Behaviour of Cross-Laminated Timber Floors. Structural Engineering International, Iabse, Eth-honggerberg, 2017, 27 (2), pp.238 - 245. ⟨10.2749/101686617X14881932435411⟩. ⟨hal-01691117⟩
  • L. Franzoni, Arthur Lebée, F. Lyon, Gilles Forêt. Elastic behavior of Cross Laminated Timber and timber panels with regular gaps: Thick-plate modeling and experimental validation. Engineering Structures, Elsevier, 2017, 141, pp.402 - 416. ⟨10.1016/j.engstruct.2017.03.010⟩. ⟨hal-01691125⟩
  • Arthur Lebée, Karam Sab. On the Generalization of Reissner Plate Theory to Laminated Plates, Part I: Theory. Journal of Elasticity, Springer Verlag, 2017, 126 (1), pp.39 - 66. ⟨10.1007/s10659-016-9581-6⟩. ⟨hal-01691085⟩
  • Hussein Nassar, Arthur Lebée, Laurent Monasse. Curvature, metric and parametrization of origami tessellations: Theory and application to the eggbox pattern. Proceedings of the Royal Society of Edinburgh: Section A Mathematics, Cambridge University Press (CUP), 2017, 473 (2197), ⟨10.1098/rspa.2016.0705⟩. ⟨hal-01368009⟩
  • Olivier Perret, Arthur Lebée, Cyril Douthe, Karam Sab. Extension of the Bending-Gradient theory to thick plates buckling: application to Cross Laminated Timber walls. Matériaux & Techniques, EDP Sciences, 2016, 104 (4), ⟨10.1051/mattech/2016021⟩. ⟨hal-01712210⟩
  • Lorenzo Franzoni, Arthur Lebée, Florent Lyon, Gilles Forêt. Influence of orientation and number of layers on the elastic response and failure modes on CLT floors: modeling and parameter studies. European Journal of Wood and Wood Products, Springer Verlag, 2016, ⟨10.1007/s00107-016-1038-x⟩. ⟨hal-01306593⟩
  • Olivier Perret, Arthur Lebée, Cyril Douthe, Karam Sab. The Bending–Gradient theory for the linear buckling of thick plates: Application to Cross Laminated Timber panels. International Journal of Solids and Structures, Elsevier, 2016, 87, pp.139 - 152. ⟨10.1016/j.ijsolstr.2016.02.021⟩. ⟨hal-01712204⟩
  • Mohammed Khalil Ferradi, Arthur Lebée, Agnès Fliscounakis, Xavier Cespedes, Karam Sab. A model reduction technique for beam analysis with the asymptotic expansion method. Computers and Structures, Elsevier, 2016, 172, pp.11 - 28. ⟨10.1016/j.compstruc.2016.05.013⟩. ⟨hal-01691129⟩
  • Arthur Lebée. From Folds to Structures, a Review. International Journal of Space Structures, Multi-Science Publishing, 2015, 30 (2), pp.55-74. ⟨10.1260/0266-3511.30.2.55⟩. ⟨hal-01266686⟩
  • Arthur Lebée, Karam Sab. Homogenization of a space frame as a thick plate: Application of the Bending-Gradient theory to a beam lattice. Computers and Structures, Elsevier, 2013, pp.88-101. ⟨hal-00938967⟩
  • Arthur Lebée, Karam Sab. Application de la théorie Bending-Gradient aux plaques stratifiées. Revue des composites et des matériaux avancés, Lavoisier, 2012, 22 (3), pp.433--444. ⟨10.3166/rcma.22.433-444⟩. ⟨hal-00794204⟩
  • Arthur Lebée, Karam Sab. Homogenization of cellular sandwich panels. Comptes Rendus Mécanique, Elsevier Masson, 2012, 340 (4-5), pp.320--337. ⟨10.1016/j.crme.2012.02.014⟩. ⟨hal-00794221⟩
  • Arthur Lebée, Karam Sab. Homogenization of thick periodic plates: Application of the Bending-Gradient plate theory to a folded core sandwich panel. International Journal of Solids and Structures, Elsevier, 2012, 49 (19-20), pp.2778--2792. ⟨10.1016/j.ijsolstr.2011.12.009⟩. ⟨hal-00794194⟩
  • Arthur Lebée, Karam Sab. A bending-gradient model for thick plates, I : theory. International Journal of Solids and Structures, Elsevier, 2011, 48, pp.2878-2888. ⟨10.1016/j.ijsolstr.2011.06.006⟩. ⟨hal-00661326⟩
  • Arthur Lebée, Karam Sab. A bending-gradient model for thick plates, II : Closed-form solutions for cylinfrical bending of laminates. International Journal of Solids and Structures, Elsevier, 2011, 48, pp.2889-2901. ⟨10.1016/j.ijsolstr.2011.06.005⟩. ⟨hal-00661336⟩
  • Arthur Lebée, Karam Sab. A Cosserat multiparticle model for periodically layered materials. Mechanics Research Communications, Elsevier, 2010, 37 (3), pp.293-297. ⟨10.1016/j.mechrescom.2010.01.007⟩. ⟨hal-00524675⟩
  • Arthur Lebée, Karam Sab. Transverse shear stiffness of a chevron folded core used in sandwich construction. International Journal of Solids and Structures, Elsevier, 2010, 47 (18-19), pp.2620--2629. ⟨10.1016/j.ijsolstr.2010.05.024⟩. ⟨hal-00814766⟩

Communication dans un congrès28 documents

  • Pierre Margerit, Arthur Lebée, Jean-François Caron. Identification de la raideur locale en flexion d'un empilement anisotrope par analyse en vecteurs d'onde. Application à une table d'harmonie de piano innovante.. 21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. ⟨hal-02420701⟩
  • Nadine Bejjani, Pierre Margerit, Karam Sab, Arthur Lebée, Joanna Bodgi. La théorie du Bending-Gradient pour la propagation des ondes dans les plaques composites. 21ème Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. ⟨hal-02420742⟩
  • Arthur Lebée, Laurent Monasse, H. Nassar. Fitting surfaces with the Miura tessellation. 7th International Meeting on Origami in Science, Mathematics and Education (7OSME), Sep 2018, Oxford, United Kingdom. pp.811. ⟨hal-01978795⟩
  • Grégoire Corre, Arthur Lebée, Karam Sab, Mohammed Khalil Ferradi, Xavier Cespedes. Modèle de poutre enrichi soumis à des déformations imposées. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01899335⟩
  • Rawad Baroud, Karam Sab, Arthur Lebée. La théorie Bending-Gradient dans le code d'élément finis. Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France. ⟨hal-01621529⟩
  • Pierre Margerit, Arthur Lebée, Jean-François Caron, Kerem Ege, Xavier Boutillon. Identification haute résolution de nombres d'ondes pour la caractérisation des stratifiés anisotropes. Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France. pp.151985. ⟨hal-01621542⟩
  • Grégoire Corre, Arthur Lebée, Karam Sab, Mohammed Khalil Ferradi, Xavier Cespedes. Higher order elastoplastic beam model. COMPLAS 2017, Sep 2017, Barcelone, Spain. ⟨hal-01691226⟩
  • Hussein Nassar, Arthur Lebée, Laurent Monasse. Macroscopic deformation modes of origami tessellations and periodic pin-jointed trusses: the case of the eggbox. IASS Annual Symposium 2017 “Interfaces: architecture, engineering, science”, Sep 2017, Hambourg, Germany. ⟨hal-01691183⟩
  • Olivier Perret, Cyril Douthe, Arthur Lebée, Karam Sab. Buckling of cross laminated timber walls. WCTE 2016 - World Conference on Timber Engineering, Aug 2016, Vienne, Austria. ⟨hal-01712292⟩
  • Lorenzo Franzoni, Arthur Lebée, Florent Lyon, Gilles Forêt. Bending behavior of regularly spaced CLT panels. WCTE 2016 - World Conference on Timber Engineering, Aug 2016, Vienne, Austria. ⟨hal-01691273⟩
  • Olivier Perret, Arthur Lebée, Cyril Douthe, Karam Sab. Extension of the Bending-Gradient theory to thick plates buckling: application to Cross-Laminated-Timber panels. 19ème Journées Nationales Composites, Jun 2015, Lyon, France. ⟨hal-01270811⟩
  • Lorenzo Franzoni, Arthur Lebée, Florent Lyon, Gilles Forêt. Bending behaviour of massive and aerated timber floors. Orgagec 2015 - Matériaux organiques dans le Génie civil, Nov 2015, Champs-sur-Marne, France. ⟨hal-01233252⟩
  • Lorenzo Franzoni, Arthur Lebée, Florent Lyon, Gilles Forêt. Advanced modelling of Cross Laminated Timber (CLT) panels in bending. Euromech Colloquim 556 Theoretical Numerical and Experimental Analyses of Wood Mechanics, May 2015, Dresde, Germany. ⟨hal-01270289⟩
  • Lorenzo Franzoni, Arthur Lebée, Gilles Forêt, Florent Lyon. Advanced modelling for design helping of heterogeneous CLT panels in bending. International Network on Timber Engineering Research - INTER - Meeting 48, Sibenik - Croatia, Aug 2015, Sibenik, Croatia. ⟨hal-01233249⟩
  • Arthur Lebée, Karam Sab. Introduction to modelization of thick and heterogeneous plates. Rencontres franciliennes de mécanique, Jun 2014, Paris, France. ⟨hal-01134568⟩
  • Arthur Lebée, Karam Sab. An error estimate for the Bending-Gradient plate model. Euromech563: Generalized Continua and their application to the design of composites and metamaterials, 2014, Cisterna di Latina, Italy. ⟨hal-01134564⟩
  • Lorenzo Greco, Arthur Lebée, Cyril Douthe. Investigation of the elastic behavior of reciprocal systems using homogenization techniques. 2013 IASS Annual Symposium : Beyond the Limit of Man, Sep 2013, Wroclaw, Poland. 9 p. ⟨hal-01063705⟩
  • Arthur Lebée, Gilles Forêt. Stiffness and stress efficiency of periodic reinforcing pads for FPSO's hull. Journées Nationales sur les Composites, Jun 2013, France. pp.# 170. ⟨hal-00938960⟩
  • Arthur Lebée, Karam Sab. Application of the Bending-Gradient theory to a beam lattice. 11e colloque national en calcul des structures, CSMA, May 2013, Giens, France. ⟨hal-01717097⟩
  • Arthur Lebée, Karam Sab. Homogenization of a beam lattice as a thick plate. 11eme colloque national en calcul des structures (CSMA2013), May 2013, France. ⟨hal-00938928⟩
  • Arthur Lebée. The Bending gradient theory for thick and heterogenous plates. Journées Nationales Composites, Jun 2013, France. ⟨hal-00938979⟩
  • Arthur Lebée, Karam Sab. Homogenization of a beam lattice as a thick plate. International Conference on Computational Mechanics for Spatial Structures, Apr 2012, Sarajevo, Bosnia and Herzegovina. ⟨hal-00921620⟩
  • Arthur Lebée, Karam Sab. Homogenization of cellular sandwich panels. International Conference on Sandwich Structures, Aug 2012, France. ⟨hal-00921621⟩
  • Arthur Lebée, Karam Sab. Thick Plate Homogenization of Sandwich Panels Including Folded Cellular Cores. IUTAM Symposium: Mechanics of Liquid and Solid Foams, May 2011, Austin, United States. ⟨hal-00921614⟩
  • Arthur Lebée, Karam Sab. Quelques exemples d'application aux composites stratitfiés de la théorie Bending-Gradient pour les plaques. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.167. ⟨hal-00597537⟩
  • Arthur Lebée, Karam Sab. Transverse shear stiffness for innovative sandwich panels. Journée annuelles de la société française de métallurgie et de matériaux, Jun 2010, France. ⟨hal-00921608⟩
  • Arthur Lebée, Karam Sab. A full bending gradient theory for thick plates. European Conference on Computational Mechanics IV, May 2010, France. ⟨hal-00921606⟩
  • Arthur Lebée, Karam Sab. Raideur en cisaillement transverse du module à chevrons utilisé comme âme de panneaux sandwich = Transverse Shear Stiffness of a Chevron Folded Core Used in Sandwich Construction. JNC 16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00384146⟩

Poster4 documents

  • Olivier Perret, Cyril Douthe, Arthur Lebée, Karam Sab. Le flambement de panneaux en bois lamellé-croisé par un modèle de plaque épaisse. 4ème Journées Scientifiques du Groupe de Recherche 3544 Sciences du Bois, Nov 2015, Clermont-Ferrand, France. ⟨hal-01270796⟩
  • Lorenzo Franzoni, Arthur Lebée, Florent Lyon, Gilles Forêt. Comportement en flexion de panneaux en bois lamellé croisé hétérogènes. Journées Scientifiques du Groupe de Recherche Science du Bois, Nov 2015, Clermont Ferrand, France. ⟨hal-01233244⟩
  • Lorenzo Franzoni, Arthur Lebée, Florent Lyon, Gilles Forêt. Modélisation des panneaux CLT en flexion: vers un modèle de couche équivalente pour le bois?. Journées Scientifiques du Groupe de Recherche Science du Bois, Nov 2014, Nancy, France. ⟨hal-01123894⟩
  • Olivier Perret, Cyril Douthe, Arthur Lebée, Karam Sab. Instabilités de voilement des panneaux en lamellé-croisé. Journée Scientifique du Groupe de Recherche 3544 Sciences du Bois, Nov 2014, Nancy, France. ⟨hal-01135554⟩

Ouvrage (y compris édition critique et traduction)1 document

Chapitre d'ouvrage6 documents

  • Sébastien Brisard, Arthur Lebée. Direct Derivation of Plate Theories. Holm Altenbach; Andreas Öchsner. Encyclopedia of Continuum Mechanics, Springer, 2017, Section on plates, 978-3-662-53605-6. ⟨10.1007/978-3-662-53605-6_131-1⟩. ⟨hal-01685053⟩
  • Arthur Lebée, Sébastien Brisard. 3D Derivations of Static Plate Theories. Holm Altenbach; Andreas Öchsner; Karam Sab. Encyclopedia of Continuum Mechanics, Springer, 2017, Section on plates, 978-3-662-53605-6. ⟨10.1007/978-3-662-53605-6_132-1⟩. ⟨hal-01711973⟩
  • Arthur Lebée, Karam Sab. The Bending-Gradient Theory for Laminates and In-Plane Periodic Plates. Shell-like Structures, Volume 572 of the series CISM International Centre for Mechanical Sciences, 572, Springer, 2016, 978-3-319-42275-6. ⟨10.1007/978-3-319-42277-0_3⟩. ⟨hal-01691095⟩
  • Arthur Lebée, Karam Sab. Justification of the Bending-Gradient Plate Model Through Asymptotic Expansions. Altenbach, Holm and Forest, Samuel and Krivtsov, Anton. Generalized Continua as Models for Materials, Springer-Verlag Berlin Heidelberg, pp.217--236, 2013, ⟨10.1007/978-3-642-36394-8_12⟩. ⟨hal-00846894⟩
  • Arthur Lebée, Karam Sab. A Bending-Gradient theory for thick laminated plates homogenization. Altenbach, Holm and Maugin, Gérard and Erofeev, Vladimir. Mechanics of Generalized Continua, Springer Berlin Heidelberg, pp.77-95, 2011, 9783642192197. ⟨hal-00938939⟩
  • Arthur Lebée, Karam Sab. Reissner-Mindlin Shear Moduli of a Sandwich Panel with Periodic Core Material. MECHANICS OF GENERALIZED CONTINUA - ONE HUNDRED YEARS AFTER THE COSSERATS, Maugin GA; Metrikine AV, pp.169-177, 2010, Advances in Mechanics and Mathematics, ⟨10.1007/978-1-4419-5695-8_18⟩. ⟨hal-00524700⟩

Direction d'ouvrage, Proceedings, Dossier1 document

Brevet1 document

  • Arthur Lebée. Procede et dispositif pour la conformation de reliefs dans une feuille plane. France, N° de brevet: FR2008/001725. 2009. ⟨hal-00921593⟩

Thèse1 document

  • Arthur Lebée. Homogénéisation de plaques périodiques épaisses : application aux panneaux sandwichs à âme pliables en chevrons. Mécanique des matériaux [physics.class-ph]. Université Paris-Est, 2010. Français. ⟨NNT : 2010PEST1070⟩. ⟨tel-00557754v2⟩

Cours1 document

  • Arthur Lebée. The Bending-Gradient theory for laminates and in-plane periodic plates. Doctoral. Arpino, Italy. 2015. ⟨cel-01266716⟩