Skip to Main content

Keywords

Number of documents

113

Parcours


 

Anne-Françoise GOURGUES-LORENZON - Professeur, Ecole nationale supérieure des mines de Paris - PSL                                                                                                                

Née en 1970

Mines Paris, PSL University, Centre des Matériaux, UMR CNRS 7633                                                                                             

CURSUS

·       1992 : Ingénieur Civil, Ecole des Mines de Paris, option « Sciences et Génie des Matériaux ».

·       1993 : DEA « Mécanique et Matériaux », Université Paris XIII.

·       1997 : Doctorat en Sciences et génie des matériaux, Ecole des Mines de Paris.

·       1998 : Post-doctorat, Imperial College (Londres).

·       1999 : Maître-assistant (1999) à l’Ecole des Mines de Paris, Centre des Matériaux.

·       2007 : HDR (Institut National Polytechnique de Lorraine).

·       Depuis 2008 : professeur à l’Ecole des Mines de Paris, Centre des Matériaux.

Encadrement : 23 stagiaires (deuxième et troisième années Ecole, DEA/M2R, mastère), 52 thèses (47 soutenues, 5 en cours) en collaboration interne et/ou externe au laboratoire, 2 post-doctorats. Trois de ces doctorants ont obtenu un prix Bodycote-SF2M : S. Dépinoy (2015), A. Hermant (2016), H. Godin (2019). Deux ont obtenu un Prix Jacquet SF2M : R. Chosson (2015), C. Varenne (2019). N. Cliche a obtenu le Prix Amiral Daveluy 2020 de la Marine Nationale et le Prix de thèse 2020 de l'Académie de marine (sciences exactes et naturelles).

DISTINCTIONS SCIENTIFIQUES 

·       2001 Cook-Ablett Award (Institute of Materials, London) : best paper in Materials Science and Technology.

·       2004 Prix Jean Rist (SF2M).

·       2004 Best Paper in Fatigue and Fracture of Engineering Materials and Structures.

·    2013 Prix du meilleur « Jeu sérieux - Etude de cas » pour les ECSPER - Rupture au Festival du Film Universitaire Pédagogique de 2013.

·       2019 Médaille Bastien-Guillet (SF2M).

 

Initiée au monde des matériaux par (entre autres) André Pineau dans le cycle Ingénieurs civils de l’Ecole des Mines de Paris, j’ai poursuivi ma formation par la recherche avec le DEA Mécanique et Matériaux (1993) puis une thèse de doctorat sous la direction d’Éric Andrieu, toujours à l’Ecole des Mines, portant sur la fissuration des alliages base nickel assistée par l’environnement. A l’occasion d’un post-doctorat à l’Imperial College de Londres, je plonge dans le vaste univers des aciers, m’initiant en particulier aux arcanes des transformations bainitiques ainsi qu’à un tout nouvel outil maintenant bien répandu : la diffraction des électrons rétrodiffusés (EBSD). De retour au Centre des Matériaux comme maître-assistant  puis professeur, j’y lance l’activité EBSD tout en abordant les relations entre transformations de phases, microstructures induites et propriétés mécaniques (plasticité, fluage, rupture) d’alliages métalliques : aciers, alliages d’aluminium, de zirconium.

 

Ma pratique d’enseignement comprend des activités traditionnelles (cours et TD, encadrement de projets de laboratoire, de stages, animation de l’option Sciences et Génie des Matériaux de l’Ecole des Mines jusqu'en 2021). Je participe aussi à des activités plus innovantes telles que l’élaboration d’un « serious game » sur la rupture (2013). Nous avons aussi l’opportunité de monter de nombreuses visites d’entreprises, mêlant de plus en plus doctorants et élèves ingénieurs, ainsi que des projets courts en entreprise, qui donnent aux élèves un aperçu du travail en groupe de projet ad hoc pour faire avancer rapidement une problématique en mobilisant tous les moyens « du bord ». La valorisation des supports pédagogiques (transparents et podcasts des cours, TD, études de cas détaillées) sur le site de l’Ecole des Mines est opérationnelle depuis plus de 12 ans. J’ai un petit « faible » pour les activités de type « ma (ou : sa) thèse en un exercice corrigé », qui a fourni une bonne douzaine d'études de cas, mises sur le même site après avoir servi de sujet d’examen.

 

Ma principale action d’enseignement reste la formation doctorale. La recherche d’un point de fonctionnement différent pour chaque doctorant(e), dans le contexte de ses travaux de recherche, de la manière de l’aider à « grandir » scientifiquement et à mûrir son projet professionnel, est pour moi aussi passionnante et indispensable que les avancées scientifiques apportées par les travaux de thèse des jeunes chercheurs. Je suis responsable de la spécialité doctorale "Sciences et génie des matériaux" de l'ED 621 ISMME depuis 2020.


Journal articles63 documents

  • Constance Chanh, Anaïs Gourment, Betrand Petit, Anne-Françoise Gourgues-Lorenzon. Experimental determination of 3D crack propagation scenario in resistance spot welds of a martensitic stainless steel. International Journal of Fracture, Springer Verlag, In press, ⟨10.1007/s10704-022-00626-2⟩. ⟨hal-03614191⟩
  • G. Trego, J.C. Brachet, V. Vandenberghe, L. Portier, L. Gélébart, et al.. Influence of grain size on the high-temperature creep behaviour of M5Framatome1 zirconium alloy under vacuum. Journal of Nuclear Materials, Elsevier, 2022, 560, pp.153503. ⟨10.1016/j.jnucmat.2021.153503⟩. ⟨hal-03517768⟩
  • Nicolas Jousset, Marine Gaumé, Florent Bridier, Julien Beaudet, Jean-Loup Heuzé, et al.. Effect of the Thermal History on Macrostructure and Microstructure Development in High-Strength Steel Welds. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, In press, ⟨10.1007/s11661-022-06686-2⟩. ⟨hal-03649371⟩
  • Anne-Françoise Gourgues-Lorenzon, N. Cliche, S. Ringeval, E. Georges, J. Bellus, et al.. Influence of the High-Temperature Mechanical Loading Mode on the Flow Behavior and Microstructural Evolution of a Nb-Stabilized Austenitic Stainless Steel. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, In press, ⟨10.1007/s11661-021-06536-7⟩. ⟨hal-03499953⟩
  • Chloé Varenne, Frédéric Prima, Cédrik Brozek, Julie Bourgon, Jacques Besson, et al.. High impact resistance of a TWIP β titanium alloy: linking the multi-scale deformation and fracture mechanisms. Journal of Materials Science, Springer Verlag, 2021, Journal of Materials Science, 56, pp.5201. ⟨10.1007/s10853-020-05582-7⟩. ⟨hal-03065280⟩
  • Chloé Varenne, Frédéric Prima, Cédrik Brozek, Julie Bourgon, Jacques Besson, et al.. Deformation and fracture behavior of new strain-transformable titanium alloys: a multi-scale investigation. MATEC Web of Conferences, EDP sciences, 2020, 321, pp.11006. ⟨10.1051/matecconf/202032111006⟩. ⟨hal-03065300⟩
  • Quentin Tonizzo, Matthieu Mazière, Astrid Perlade, Anne-Françoise Gourgues-Lorenzon. Effect of austenite stability on the fracture micromechanisms and ductile-to-brittle transition in a medium-Mn, ultra-fine-grained steel for automotive applications. Journal of Materials Science, Springer Verlag, 2020, ⟨10.1007/s10853-020-04470-4⟩. ⟨hal-03065295⟩
  • Anne-Françoise Gourgues-Lorenzon, Frank Tioguem, Franck N'Guyen, Matthieu Mazière, Franck Tankoua, et al.. Advanced quantification of the carbide spacing and correlation with dimple size in a high-strength medium carbon martensitic steel. Materials Characterization, Elsevier, 2020, 167, pp.110531. ⟨10.1016/j.matchar.2020.110531⟩. ⟨hal-03065262⟩
  • Anne-Françoise Gourgues-Lorenzon, Q. Tonizzo, Daniel Caillard, A. Perlade, M. Mazière, et al.. Multiscale examination of deformation and fracture mechanisms of a duplex advanced high strength steel: Effect of testing temperature and of micromechanical interactions between microstructural constituents. Materials Science and Engineering: A, Elsevier, 2019, 764, pp.138196. ⟨10.1016/j.msea.2019.138196⟩. ⟨hal-03065259⟩
  • Hélène Godin, Jean-Denis Mithieux, Coralie Parrens, Guillaume Badinier, Mohamed Sennour, et al.. Effects of cooling path and resulting microstructure on the impact toughness of a hot stamping martensitic stainless steel. Materials Science and Engineering: A, Elsevier, 2019, 742, pp.597-607. ⟨10.1016/j.msea.2018.11.036⟩. ⟨hal-01930294⟩
  • A. Hermant, E. Suzon, Philippe Petit, J. Bellus, E. Georges, et al.. Hot Deformation and Recrystallization Mechanisms in a Coarse-Grained, Niobium Stabilized Austenitic Stainless Steel (316Nb). Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2019, 50 (4), pp.1625-1642. ⟨10.1007/s11661-018-05103-x⟩. ⟨hal-02455375⟩
  • Astrid Perlade, Annie Antoni, Rémy Besson, Daniel Caillard, Michael Callahan, et al.. Development of 3rd generation Medium Mn duplex steels for automotive applications. Materials Science and Technology, Maney Publishing, 2019, 35 (2), pp.1-16. ⟨10.1080/02670836.2018.1549303⟩. ⟨hal-01952714⟩
  • Ronan Thieurmel, Jacques Besson, Édouard Pouillier, Aurore Parrot, Antoine Ambard, et al.. Contribution to the understanding of brittle fracture conditions of zirconium alloy fuel cladding tubes during LOCA transient. Journal of Nuclear Materials, Elsevier, 2019, 527, pp.151815. ⟨10.1016/j.jnucmat.2019.151815⟩. ⟨hal-02455379⟩
  • Minghao Zhang, Anne-Françoise Gourgues-Lorenzon, Esteban P. Busso, Haiwen Luo, Mingxin Huang. Recrystallisation-assisted creep of an austenitic Fe-Ni alloy under low stresses after hot deformation. Acta Materialia, Elsevier, 2018, 153, pp.23-34. ⟨10.1016/j.actamat.2018.04.050⟩. ⟨hal-01806089⟩
  • Hubert Salmon-Legagneur, S. Vincent, J. Garnier, Anne-Françoise Gourgues-Lorenzon, Eric Andrieu. Anisotropic intergranular damage development and fracture in a 14Cr ferritic ODS steel under high-temperature tension and creep. Materials Science and Engineering: A, Elsevier, 2018, 722, pp.231-241. ⟨10.1016/j.msea.2018.02.102⟩. ⟨hal-01759149⟩
  • Franck Tankoua, Jérôme Crépin, P. Thibaux, S. Cooreman, Anne-Françoise Gourgues-Lorenzon. Quantification and microstructural origin of the anisotropic nature of the sensitivity to brittle cleavage fracture propagation for hot-rolled pipeline steels. International Journal of Fracture, Springer Verlag, 2018, 212 (2), pp.143-166. ⟨10.1007/s10704-018-0297-4⟩. ⟨hal-01869022⟩
  • Frank Tioguem, Matthieu Mazière, Franck Tankoua, André Galtier, Anne-Françoise Gourgues-Lorenzon. Identification of ductile to brittle transition temperature by using plane strain specimen in tensile test and correlation with instrumented Charpy impact test: experimental and numerical study. Mechanics & Industry, EDP Sciences, 2018, 19 (1), 107, 11 p. ⟨10.1051/meca/2017034⟩. ⟨hal-01869103⟩
  • Sylvain Dépinoy, Caroline Toffolon-Masclet, Stéphane Urvoy, Justine Roubaud, Bernard Marini, et al.. Carbide precipitation in 2.25 Cr-1 Mo bainitic steel : effect of heating and isothermal tempering conditions. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2017, 48 (5), pp.2164-2178. ⟨10.1007/s11661-017-4045-6⟩. ⟨hal-01518779⟩
  • Sylvain Dépinoy, Bernard Marini, Caroline Toffolon-Masclet, François Roch, Anne-Françoise Gourgues-Lorenzon. Austenite grain growth in a 2.25Cr-1Mo vanadium-free steel accounting for Zener pinning and solute drag : experimental study and modeling. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2017, 48 (5), pp.2289-2300. ⟨10.1007/s11661-017-4002-4⟩. ⟨hal-01518870⟩
  • Quentin Tonizzo, Anne-Françoise Gourgues-Lorenzon, Matthieu Mazière, Astrid Perlade, Ian Zuazo. Microstructure, plastic flow and fracture behavior of ferrite-austenite duplex low density medium Mn steel. Materials Science and Engineering: A, Elsevier, 2017, 706, pp.217-226. ⟨10.1016/j.msea.2017.09.002⟩. ⟨hal-01599803⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas. Influence of carbon content on the primary solidification mode of high strength steels in resistance spot welding conditions. Scripta Materialia, Elsevier, 2016, 120, pp.98-102. ⟨10.1016/j.scriptamat.2016.04.011⟩. ⟨hal-01337970⟩
  • Raphael Chosson, Anne-Françoise Gourgues-Lorenzon, V. Vandenberghe, Jean-Christophe Brachet, Jérôme Crépin. Creep flow and fracture behavior of the oxygen-enriched alpha phase in zirconium alloys. Scripta Materialia, Elsevier, 2016, 117, pp.20-23. ⟨10.1016/j.scriptamat.2016.02.021⟩. ⟨hal-01288691⟩
  • Julie Lorthios, Matthieu Mazière, Xavier Lemoine, Philippe Cugy, Jacques Besson, et al.. Fracture behaviour of a Fe–22Mn–0.6C–0.2V austenitic TWIP steel. International Journal of Mechanical Sciences, Elsevier, 2015, 101-102, pp.99-113. ⟨10.1016/j.ijmecsci.2015.07.029⟩. ⟨hal-01199574⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Anne-Françoise Gourgues-Lorenzon. Fatigue lifetime and tearing resistance of AA2198 Al-Cu-Li alloy friction stir welds: fffect of defects. International Journal of Fatigue, Elsevier, 2015, 70, pp.463-472. ⟨10.1016/j.ijfatigue.2014.07.001⟩. ⟨hal-01102466⟩
  • Franck Tankoua, Jérôme Crépin, P. Thibaux, M. Arafin, Steven Cooreman, et al.. Delamination of pipeline steels : determination of an anisotropic cleavage criterion. Mechanics & Industry, EDP Sciences, 2014, 15, pp.45-50. ⟨10.1051/meca/2014001⟩. ⟨hal-01055448⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Mohamed Sennour, Anne Laurent, et al.. Microstructural characterization of internal welding defects and their effect on the tensile behavior of FSW joints of AA2198 Al-Cu-Li alloy. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2014, 45, pp.5531-5544. ⟨10.1007/s11661-014-2537-1⟩. ⟨hal-01095768⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas, André Pineau. Fracture toughness of the molten zone of resistance spot weld. International Journal of Fracture, Springer Verlag, 2013, 181, pp.209-226. ⟨10.1007/s10704-013-9836-1⟩. ⟨hal-00830479⟩
  • Edouard Pouillier, Anne-Françoise Gourgues, D. Tanguy, Esteban P. Busso. A study of intergranular fracture in an aluminium alloy due to hydrogen embrittlement. International Journal of Plasticity, Elsevier, 2012, 34, pp.139-153. ⟨10.1016/j.ijplas.2012.01.004,⟩. ⟨hal-00701032⟩
  • Delphine Reche, Jacques Besson, T. Sturel, X. Lemoine, Anne-Françoise Gourgues-Lorenzon. Analysis of the air-bending test using finite-element simulation : application to steel sheets. International Journal of Mechanical Sciences, Elsevier, 2012, 57, pp.43-53. ⟨10.1016/j.ijmecsci.2012.01.014⟩. ⟨hal-00705763⟩
  • Delphine Reche, T. Sturel, Olivier Bouaziz, A. Col, Anne-Françoise Gourgues-Lorenzon. Damage development in low alloy TRIP-aided steels during air-bending. Materials Science and Engineering: A, Elsevier, 2011, 528, pp.5241-5250. ⟨10.1016/j.msea.2011.03.042⟩. ⟨hal-00592250⟩
  • Rattanak Lim, Maxime Sauzay, France Dalle, Ivan Tournié, Patrick Bonnaillie, et al.. Modelling and experimental study of the tertiary creep stage of Grade 91 steel. International Journal of Fracture, Springer Verlag, 2011, 169, pp.213-228. ⟨10.1007/s10704-011-9585-y⟩. ⟨hal-00605165⟩
  • Djillali Kaddour, Anne-Françoise Gourgues-Lorenzon, J.C. Brachet, Laurence Portier, André Pineau. Microstructural influence on high temperature creep flow of Zr–1%NbO alloy in near-α, (α + β), and β temperature ranges in a high vacuum environment. Journal of Nuclear Materials, Elsevier, 2011, 408, pp.116-124. ⟨10.1016/j.jnucmat.2010.11.025⟩. ⟨hal-00553181⟩
  • Laurent Baraton, Zhanbing He, Chang Seok Lee, Jean-Luc Maurice, Costel Sorin Cojocaru, et al.. Synthesis of few-layered graphene by ion implantation of carbon in nickel thin films. Nanotechnology, Institute of Physics, 2011, 22, 085601, 5 p. ⟨10.1088/0957-4484/22/8/085601⟩. ⟨hal-00557031⟩
  • B. Wattiez, Anne-Françoise Gourgues, A. Deschamps, A. Roeme, Z. Zermout. Experimental investigation of microstructure and ageing behaviour of bulk Zn-(1-18) wt% Al-(0-0.06) wt% Mg alloys. Materials Science and Engineering: A, Elsevier, 2010, 527 (29-30), pp.7901-7911. ⟨10.1016/j.msea.2010.08.068⟩. ⟨hal-00542912⟩
  • Pierre-François Giroux, F. Dalle, Maxime Sauzay, J. Malaplate, Benjamin Fournier, et al.. Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature. Materials Science and Engineering: A, Elsevier, 2010, 527, pp.3984-3993. ⟨10.1016/j.msea.2010.03.001⟩. ⟨hal-00491028⟩
  • Clara Panait, Anna Zielinska-Lipiec, Tomasz Koziel, Aleksandra Czyrska-Filemonowicz, Anne-Françoise Gourgues-Lorenzon, et al.. Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600 °C for more than 100,000 h. Materials Science and Engineering: A, Elsevier, 2010, 527, pp.4062-4069. ⟨10.1016/j.msea.2010.03.010⟩. ⟨hal-00491033⟩
  • Julie Lorthios, Franck N'Guyen, Anne-Françoise Gourgues-Lorenzon, Thilo F. Morgeneyer, P. Cugy. Damage observation in a high-manganese austenitic TWIP steel by synchrotron radiation computed tomography. Scripta Materialia, Elsevier, 2010, 63, pp.1220-1223. ⟨10.1016/j.scriptamat.2010.08.042⟩. ⟨hal-00541294⟩
  • Florian Vivier, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Creep rupture of a 9Cr1MoNbV steel at 500 °C : base metal and welded joint. Nuclear Engineering and Design, Elsevier, 2010, 240, pp.2704-2709. ⟨10.1016/j.nucengdes.2010.06.031⟩. ⟨hal-00523418⟩
  • Clara Panait, Walter Bendick, A. Fuchsmann, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Study of the microstructure of the grade 91 steel after more than 100.000h of creep exposure at 600°C. International Journal of Pressure Vessels and Piping, Elsevier, 2010, 87, pp.326-335. ⟨10.1016/j.ijpvp.2010.03.017⟩. ⟨hal-00509625⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne-Françoise Gourgues-Lorenzon. Effect of joint line remnant on fatigue lifetime of friction stir welded Al-Cu-Li alloy. Science and Technology of Welding & Joining, 2010, 15, pp.694-698. ⟨10.1179/136217110X12813393169453⟩. ⟨hal-00553188⟩
  • Quentin Auzoux, Lucien Allais, Christel Caës, I. Monnet, Anne-Françoise Gourgues, et al.. Effect of pre-strain on creep of three AISI 316 austenitic stainless steels in relation to reheat cracking of weld-affected zones. Journal of Nuclear Materials, Elsevier, 2010, 400, pp.127-137. ⟨10.1016/j.jnucmat.2010.02.021⟩. ⟨hal-00488986⟩
  • Anne-Françoise Gourgues-Lorenzon. Application of electron backscatter diffraction to the study of phase transformations: present and possible future. Journal of Microscopy, Wiley, 2009, 233, pp.460-473. ⟨10.1111/j.1365-2818.2009.03130.x⟩. ⟨hal-00368012⟩
  • Nikolay Osipov, Anne-Françoise Gourgues-Lorenzon, Bernard Marini, Valérie Mounoury, Franck N'Guyen, et al.. FE modelling of bainitic steels using crystal plasticity. Philosophical Magazine, Taylor & Francis, 2009, 88 (30-32), pp.3757-3777. ⟨10.1080/14786430802566380⟩. ⟨hal-00513993⟩
  • P.J. Jacques, S. Allain, O. Bouaziz, A. De, Anne-Françoise Gourgues, et al.. On measurement of retained austenite in multiphase TRIP steels — results of blind round robin test involving six different techniques. Materials Science and Technology, Maney Publishing, 2009, 25, pp.567-574. ⟨10.1179/174328408X353723⟩. ⟨hal-00413810⟩
  • Alexandre Dalloz, Jacques Besson, Anne-Françoise Gourgues-Lorenzon, T. Sturel, André Pineau. Effect of shear cutting on ductility of a dual phase steel. Engineering Fracture Mechanics, Elsevier, 2009, 76, pp.1411-1424. ⟨10.1016/j.engfracmech.2008.10.009⟩. ⟨hal-00399528⟩
  • Jacques Besson, Sylvain Leclercq, Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon. Analysis of creep lifetime of a ASME Grade 91 welded pipe. Engineering Fracture Mechanics, Elsevier, 2009, 76, pp.1460-1473. ⟨10.1016/j.engfracmech.2008.12.007⟩. ⟨hal-00399532⟩
  • Vincent Gaffard, Jacques Besson, Anne-Françoise Gourgues-Lorenzon. Modelling high temperature creep flow, damage and fracture behaviour of 9Cr1Mo-NbV steel weldments. Materials at High Temperatures, Taylor and Francis, 2008, 25, pp.159-167. ⟨10.3184/096034008X356998⟩. ⟨hal-00367968⟩
  • Asmahana Zeghadi, Franck N'Guyen, Samuel Forest, Anne-Françoise Gourgues-Lorenzon, Olivier Bouaziz. Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure-Part 2 : Crystal plasticity. Philosophical Magazine, Taylor & Francis, 2007, 87, pp.1425-1446. ⟨10.1080/14786430601009517⟩. ⟨hal-00513782⟩
  • Anne-Françoise Gourgues-Lorenzon. Application of electron backscatter diffraction to the study of phase transformations. International Materials Reviews, ASM International, 2007, 52 (2), pp.65-128. ⟨10.1179/174328007X160254⟩. ⟨hal-00146341⟩
  • Asmahana Zeghadi, Franck N'Guyen, Samuel Forest, Anne-Françoise Gourgues, Olivier Bouaziz. Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure-Part 1: Computational tools and application to anisotropic elastic behaviour. Philosophical Magazine, Taylor & Francis, 2007, 87, pp.1401-1424. ⟨10.1080/14786430601009509⟩. ⟨hal-00513781⟩
  • Carine Duda, Anne-Françoise Gourgues. Electron backscatter diffraction characterisation of liquid route processed Ti6242S/SCS-6 composites. Materials Science and Engineering: A, Elsevier, 2006, vol. 435-436, p. 530-539. ⟨10.1016/j.msea.2006.07.038⟩. ⟨hal-00111071⟩
  • Vincent Gaffard, Jacques Besson, Anne-Françoise Gourgues-Lorenzon. Creep failure model of a tempered martensitic stainless steel integrating multiple deformation and damage mechanisms. International Journal of Fracture, Springer Verlag, 2005, 133, pp.139-166. ⟨10.1007/s10704-005-2528-8⟩. ⟨hal-00154843⟩
  • Alexandra Asserin-Lebert, Jacques Besson, Anne-Françoise Gourgues. Fracture of 6056 aluminum sheet materials : effect of specimen thickness and hardening behavior on strain localization and toughness. Materials Science and Engineering: A, Elsevier, 2005, 395 (1-2), pp.186-194. ⟨10.1016/j.msea.2004.12.018⟩. ⟨hal-00151590⟩
  • Asmahana Zeghadi, Anne-Françoise Gourgues, Samuel Forest, Olivier Bouaziz. Cosserat continuum modelling of grain size effects in metal polycrystals. PAMM, Wiley-VCH Verlag, 2005, 5, pp.79-82. ⟨10.1002/pamm.200510021⟩. ⟨hal-00145075⟩
  • Mihai Radu, Joseph Valy, Anne-Françoise Gourgues, F. Le Strat, André Pineau. Continuous magnetic method for quantitative monitoring of martensitic transformation in steels containing metastable austenite. Scripta Materialia, Elsevier, 2005, 52, pp.525-530. ⟨10.1016/j.scriptamat.2004.10.034⟩. ⟨hal-00172955⟩
  • Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. High temperature creep flow and damage properties of 9CrMoNbV steels : base metal and weldment. Nuclear Engineering and Design, Elsevier, 2005, 235, pp.2547-2562. ⟨10.1016/j.nucengdes.2005.07.001⟩. ⟨hal-00153585⟩
  • Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. High temperature creep flow and damage properties of the weakest area of 9Cr1Mo-NbV martensitic steel weldments. ISIJ international, Iron & Steel Institute of Japan, 2005, 45, pp.1915-1924. ⟨10.2355/isijinternational.45.1915⟩. ⟨hal-00136781⟩
  • Quentin Auzoux, Lucien Allais, Christel Caës, B. Girard, I. Tournié, et al.. Intergranular damage in AISI 316L(N) austenitic stainless steel at 600°C : pre-strain and multiaxial effects. Nuclear Engineering and Design, Elsevier, 2005, 235, pp.2227-2245. ⟨10.1016/j.nucengdes.2005.05.002⟩. ⟨hal-00153284⟩
  • Astrid Lambert-Perlade, Anne-Françoise Gourgues, Jacques Besson, T. Sturel, André Pineau. Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel. Metallurgical and Materials Transactions A, Springer Verlag/ASM International, 2004, 35, pp.1039-1053. ⟨10.1007/s11661-004-0030-y⟩. ⟨hal-00166068⟩
  • Djillali Kaddour, Stéphane Frechinet, Anne-Françoise Gourgues-Lorenzon, Jean-Christophe Brachet, L. Portier, et al.. Experimental determination of creep properties of zirconium alloys together with phase transformation. Scripta Materialia, Elsevier, 2004, 51 (6), pp.515-519. ⟨10.1016/j.scriptamat.2004.05.046⟩. ⟨hal-00166052⟩
  • Virginie Goussery, Yves Bienvenu, Samuel Forest, Anne-Françoise Gourgues, Christophe Colin, et al.. Grain size effects on the mechanical behavior of open-cell nickel foams. Advanced Engineering Materials, Wiley-VCH Verlag, 2004, 6, pp.432-439. ⟨10.1002/adem.200405153⟩. ⟨hal-00165963⟩
  • Virginie Calonne, Anne-Françoise Gourgues, André Pineau. Fatigue crack propagation in cast duplex stainless steels : thermal ageing and microstructural effects. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 2004, 27, pp.31-43. ⟨10.1111/j.1460-2695.2004.00717.x⟩. ⟨hal-00165108⟩
  • Astrid Lambert-Perlade, Anne-Françoise Gourgues, André Pineau. Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel. Acta Materialia, Elsevier, 2004, 52, pp.2337-2348. ⟨10.1016/j.actamat.2004.01.025⟩. ⟨hal-00166070⟩

Conference papers46 documents

  • Anne-Françoise Gourgues-Lorenzon, David Haboussa, Gilles Rolland, Laury-Hann Brassart, Jacques Besson, et al.. Metallurgical Approach for the Development of Heat Treatment Applied to 316L Stainless Steel Cold Spray Coatings. ITSC2021, May 2021, Virtual, France. pp.177-188, ⟨10.31399/asm.cp.itsc2021p0177⟩. ⟨hal-03499958⟩
  • Quentin Tonizzo, Anne-Françoise Gourgues-Lorenzon, Matthieu Mazière, Astrid Perlade, I. Zuazo. Microstructure, comportement plastique et transition ductile-fragile d'un acier medium Mn dit "à basse densité" pour application automobile. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p. ⟨hal-01631399⟩
  • Anne-Françoise Gourgues-Lorenzon, Michel Bellet. Quelques exemples d'activités pédagogiques dans le domaine des matériaux. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p. ⟨hal-01631406⟩
  • I. Turque, R. Chosson, M. Le Saux, J. Brachet, V. Vandenberghe, et al.. Mechanical behavior at high temperature of highly oxygen- or hydrogen-enriched $\alpha$ and (prior-)$\beta$ phases of zirconium alloys. 18th International Symposium on Zirconium in the Nuclear Industry, May 2016, Hilton Head, United States. ⟨hal-02441977⟩
  • Alexandre Hermant, Eric Suzon, Jacques Bellus, Philippe Petit, François Cortial, et al.. Hot deformation behaviour and recrystallization mechanisms in a niobium stabilized austenitic stainless steel. 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), Jul 2016, Pittsburgh, United States. pp.209-214, ⟨10.1007/978-3-319-48770-0-31⟩. ⟨hal-01496684⟩
  • I. Turque, R. Chosson, Matthieu Le Saux, J.-C. Brachet, V. Vandenberghe, et al.. Mechanical behavior at high temperature of highly oxygen- or hydrogen-enriched α and (prior-) $\beta$ phases of zirconium alloys. 18th International Symposium on Zirconium in the Nuclear Industry, May 2016, Hilton Head, United States. ⟨cea-02442337⟩
  • Isabelle Turque, Raphaël Chosson, Matthieu Le Saux, Jean-Christophe Brachet, Valérie Vandenberghe, et al.. Mechanical behavior at high temperatures of highly oxygen- or hydrogen-enriched α and (Prior-) β phases of zirconium alloys. 18th International symposium on zirconium in the nuclear industry, May 2016, Hilton Head Island, SC, United States. pp.240-280, ⟨10.1520/STP159720160063⟩. ⟨hal-01702107⟩
  • H. Salmon-Legagneur, Af. Gourgues, E. Andrieu, S. Vincent, J. Garnier. Propriétés mécanique à haute température d'aciers ODS ferritiques à 14%Cr. Journées annuelles de la SF2M – JA2015, Oct 2015, Paris, France. ⟨hal-02445716⟩
  • Sylvain Dépinoy, Caroline Toffolon-Masclet, Anne-Françoise Gourgues-Lorenzon, E. Kozeschnik, Bernard Marini, et al.. Evolution of microstructure during tempering and its influence on the mechanical behavior of 2.25Cr-1Mo bainitic steel. PTM 2015 - International conference on solid-solid phase transformations in inorganic materials, Jun 2015, Whistler, Canada. 8 p. ⟨hal-01292313⟩
  • Franck Tankoua, Jérôme Crépin, Philippe Thibaux, Steven Cooreman, Anne-Françoise Gourgues-Lorenzon. Quantitative investigation of brittle out-of-plane fracture in X70 pipeline steel. 20th European conference on fracture (ECF 20), Jun 2014, Trondheim, Norway. pp.1149-1154, ⟨10.1016/j.mspro.2014.06.187⟩. ⟨hal-01053645⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas, Matthieu Mazière, André Pineau. Local approach applied to the fracture toughness of resistance spot welds. 13th international conference on fracture, Jun 2013, Beijing, China. 10 p. ⟨hal-00853411⟩
  • Franck Tankoua, Jérôme Crépin, P. Thibaux, M. Arafin, S. Cooreman, et al.. Delamination of pipeline steels : determination of an anisotropic cleavage criterion. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00938363⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Anne-Françoise Gourgues-Lorenzon. Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy. 13th international conference on fracture, Jun 2013, Beijing, China. 10 p. ⟨hal-00853558⟩
  • Raphaël Chosson, V. Vandenberghe, Anne-Françoise Gourgues-Lorenzon, Jérôme Crépin, J.-C. Brachet, et al.. Creep behavior at high temperature of the oxygen stabilized zirconium alpha phase of fuel cladding tubes oxidized in loca conditions. LWR Fuel Performance Meeting / Top Fuel 2013, Sep 2013, Charlotte, United States. pp.520-527. ⟨hal-01427453⟩
  • Guilhem Bosc, Catherine Verdu, Nicolas Mary, Bernard Normand, Anne-Françoise Gourgues-Lorenzon, et al.. Mise en place d'un test de fatigue-corrosion des ressorts de suspension automobile. Journées jeunes chercheurs 2011, Jul 2011, Lyon, France. pp.139-143. ⟨hal-00639341⟩
  • Sylvain Leclercq, Jacques Besson, Patrick Le Delliou, Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon. Estimation de la durée de vie d'un collecteur en acier P91. Matériaux 2010, Oct 2010, Nantes, France. 8 p. ⟨hal-00570583⟩
  • Clara Panait, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, A. Fuchsmann, W. Bendick, et al.. Long term aging effect on the creep strength of the T92 steel. 9th Liege conference : materials for advanced power engineering 2010, Sep 2010, Liege, Belgium. pp.239-248. ⟨hal-00592020⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne-Françoise Gourgues-Lorenzon. Effect of friction stir weld defects on fatigue lifetime of an Al-Cu-Li alloy. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541248⟩
  • Francisca Mendez Martin, Clara Panait, Walter Bendick, Mihaela Albu, Bernhard Sonderegger, et al.. Creep strength and microstructural evolution of 9-12%Cr heat resistant steels during creep exposure at 600°C and 650°C. 9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.259-269. ⟨hal-00592232⟩
  • Charlotte Kalck, Benjamin Fournier, Françoise Barcelo, Laurent Forest, France Dalle, et al.. Propriétés en fluage à haute température et caractérisations microstructurales des joints soudés P92. Matériaux 2010, Oct 2010, Nantes, France. 12 p. ⟨hal-00570554⟩
  • Delphine Reche, T. Sturel, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Damage mechanisms of ultrahigh strength steels in bending application to a trip steel. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541087⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, V. Bochard, E. Lucas, Manuel Bobadilla. Formation et solidification de la zone fondue en soudage par point : influence des paramètres de soudage. Matériaux 2010, Oct 2010, Nantes, France. 12 p. ⟨hal-00570567⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne-Françoise Gourgues-Lorenzon. Effect of friction stir weld defects on fatigue lifetime of an Al-Cu-Li alloy (AA-2198). JP 2010 - 29èmes journées de printemps, May 2010, Paris, France. pp.139-146. ⟨hal-00509606⟩
  • Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Brigitte Bacroix, Hélène Regle, Frank Montheillet. Effect of the metallurgical state of austenite on the microtexture properties of the bainitic transformation in a low alloy steel. Solid-solid phase transformations in inorganic materials, Jun 2010, Avignon, France. pp.772-777, ⟨10.4028/www.scientific.net/SSP.172-174.772⟩. ⟨hal-00624009⟩
  • Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Brigitte Bacroix, Hélène Regle. Micromechanical modelling of microtexture formation in low alloy steel bainite. Solid-solid phase transformations in inorganic materials, Jun 2010, Avignon, France. pp.1228-1233, ⟨10.4028/www.scientific.net/SSP.172-174.1228⟩. ⟨hal-00619807⟩
  • R. Lim, Maxime Sauzay, F. Dalle, I. Tournié, Anne-Françoise Gourgues-Lorenzon. Modelling of necking during creep of grade 91 steel. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541287⟩
  • Charlotte Kalck, Benjamin Fournier, Françoise Barcelo, Laurent Forest, France Dalle, et al.. High temperature creep properties and microstructural examinations of P92 welds. 9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.424-434. ⟨hal-00592240⟩
  • Pierre-François Giroux, F. Dalle, Maxime Sauzay, Christel Caës, Benjamin Fournier, et al.. Influence of strain rate on P92 microstructural stability during fatigue tests at high temperature. Fatigue 2010, Jun 2010, Prague, Czech Republic. pp.2141-2150, ⟨10.1016/j.proeng.2010.03.230⟩. ⟨hal-00509939⟩
  • Clara Panait, W. Bendick, A. Fuchsmann, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Study of the microstructure of the grade 91 steel after more than 100 000h of creep exposure at 600°C. 2nd ECCC International Conference on Creep and Fracture in High Temperature Components: Design and Life Assessment Issues, Apr 2009, Zurich, Switzerland. pp.877-888. ⟨hal-00413783⟩
  • Rattanak Lim, Maxime Sauzay, France Dalle, Ivan Tournié, Patrick Bonnaillie, et al.. Striction de l'acier 9Cr-1Mo modifié sollicité en fluage. XIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p. ⟨hal-00664500⟩
  • Pierre-François Giroux, F. Dalle, Maxime Sauzay, G. Perez, I. Tournié, et al.. Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature. 2nd ECCC Creep conference, Apr 2009, Zurich, Switzerland. pp.477-487. ⟨hal-00411745⟩
  • Florian Vivier, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, C. Petry, Y. de Carlan, et al.. Metallurgical properties and creep behaviour of a grade 91 steel base metal and weldment after short-term exposure at 500°C. 2nd ECCC Creep conference, Apr 2009, Zurich, Switzerland. pp.906-918. ⟨hal-00413221⟩
  • Julie Lorthios, Anne-Françoise Gourgues, P. Cugy, C. Scott. Damage of TWIP steels for automotive application. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822287⟩
  • Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Hélène Regle, Frank Montheillet, Brigitte Bacroix. EBSD investigation of phase transformation in low carbon steels. Materials processing and texture, Jun 2008, Pittsburgh, United States. pp.243-250, ⟨10.1002/9780470444191.ch26⟩. ⟨hal-00871233⟩
  • Florian Vivier, Clara Panait, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Microstructure evolution in base metal and welded joint of Grade 91 martensitic steels after creep at 500-600°C. ECF 17, Sep 2008, Brno, Czech Republic. pp.1095-1102. ⟨hal-00329783⟩
  • Alexandre Dalloz, Anne-Françoise Gourgues, André Pineau, Jacques Besson, T. Sturel. Influence of the shear cutting process on damage in laboratory dual phase steels developed for automotive application. Materials science and technology (MS&T 07), Sep 2007, Detroit, United States. pp.171-181. ⟨hal-00182985⟩
  • Fouad El Houdaigui, Samuel Forest, Anne-Françoise Gourgues, Dominique Jeulin. On the size of the representative volume element for isotropic elastic polycrystalline copper. IUTAM symposium on mechanical behavior and micro mechanics of nanostructured materials, 2007, Beijing, China. pp.171-180. ⟨hal-00148578⟩
  • Alexandre Dalloz, Anne-Françoise Gourgues-Lorenzon, André Pineau, Jacques Besson, T. Sturel. Influence of the cutting process on damage in dual phase steels, in : Local approach to fracture. EUROMECH-MECAMAT 2006, 9th European mechanics of materials conference, 2006, Moret sur Loing, France. pp.265-270. ⟨hal-00146241⟩
  • Anne-Sophie Bilat, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, G. Richard, André Pineau. Brittle fracture in heat-affected zones of girth welds of modern line pipe steel (X100). Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 7 p. ⟨hal-00146312⟩
  • Nikolay Osipov, Anne-Françoise Gourgues-Lorenzon, Georges Cailletaud, Olivier Diard, Bernard Marini. Numerical generation and study of synthetic bainitic microstructures. Matériaux 2006, 2006, Dijon, France. 12 p. ⟨hal-00144530⟩
  • Anne-Sophie Bilat, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, André Pineau. Microstructures and mechanical properties of simulated heat affected zone in X100 pipeline steel girth welds. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.135-140. ⟨hal-00142204⟩
  • Jacques Besson, Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon. Modelling high temperature creep flow, damage, and fracture behaviour of 9Cr1Mo-NbV steel weldments. ECCC Creep conference, 2005, London, United Kingdom. pp.758-771. ⟨hal-00160200⟩
  • Anne-Sophie Bilat, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, André Pineau. Critères d'amorçage et de propagation des fissures dans les zones affectées thermiquement de canalisations à haute résistance – X100. Colloque national Mecamat, 2005, Aussois, France. 4 p. ⟨hal-00160362⟩
  • Vincent Gaffard, Jacques Besson, Anne-Françoise Gourgues-Lorenzon. Creep failure model of a 9Cr1Mo-NvV (P91) steel integrating multiple deformation and damage mechanisms. Advanced fracture mechanics for life and safety assessments - ECF 15, Aug 2004, Stockholm, Sweden. 8 p. ⟨hal-00165064⟩
  • Virginie Goussery, Yves Bienvenu, Samuel Forest, Anne-Françoise Gourgues, Christophe Colin, et al.. Grain size effects on the mechanical behaviour of open-cell nickel foams. International conference on cellular metals and metal foaming technology, 2003, Berlin, Germany. pp.419-424. ⟨hal-00165906⟩
  • Anne-Françoise Gourgues, Virginie Calonne, Stéphane Bugat. Caractérisation cristallographique par EBSD de la microstructure et de la fissuration des aciers inoxydables austéno-ferritiques moulés. L'analyse EBSD : principes et applications, Dec 2002, Paris, France. pp.101-109. ⟨hal-00165961⟩

Books1 document

  • Jacques Besson, Anne-Françoise Gourgues-Lorenzon, Noëlle Billon, Sabine Cantournet, Yvan Chastel, et al.. Matériaux pour l'ingénieur. Presses de l'Ecole des Mines de Paris, 390 p., 2006. ⟨hal-00142499⟩

Book sections1 document

  • Anne-Françoise Gourgues-Lorenzon. Introduction à la diffraction des électrons rétrodiffusés. ed. F. Brisset. EBSD : Analyse par diffraction des électrons rétrodiffusés ; applications et techniques couplées, EDP Sciences, pp.1-28, 2015, 9782759819126. ⟨hal-01289458⟩

Theses1 document

  • Anne-Françoise Gourgues-Lorenzon. Interactions mécanique-oxydation à haute température dans l'alliage 600 : application à la fissuration dans le milieu primaire des réacteurs nucléaires à eau sous pression. Matériaux. École Nationale Supérieure des Mines de Paris, 1997. Français. ⟨NNT : 1997ENMP0788⟩. ⟨pastel-00737015⟩

Habilitation à diriger des recherches1 document

  • Anne-Françoise Gourgues-Lorenzon. Relations entre microstructure, microtexture de transformations de phases et propriétés mécaniques d'alliages métalliques. Matériaux. Institut National Polytechnique de Lorraine (INPL), 2007. ⟨tel-03661990⟩