Skip to Main content
Number of documents

99

Andrei CONSTANTINESCU

Professional Experience

 

 CNRS Ecole Polytechnique, Palaiseau, France

 Laboratoire de Mécanique des Solides

 

Directeur de Recherches 1 ère classe since 2015

Directeur de Recherches 2 ème classe 2005-2015

 

Chargé de Recherches 1995 - 2005

 

Visiting Positions

 

 ETH Zurich, Switzerland                                Visiting professor 2015–2016

 Tokyo Institut of Technology Tokyo, Japon   Visiting professor 2008

 PSA Péugeot-Citroen Vélizy, France             Industrial leave 2002

 Oxford University Oxford, United Kingdom     Visiting fellow, Royal Society 2002

 Cornell University Ithaca, NY, USA                Visiting scientist 1994

 

Education

 

 Université Pierre et Marie Curie Paris, France  Habilitation 2005

 Ecole Polytechnique Palaiseau, France          PhD in mechanics 1994

 Ecole Polytechnique Palaiseau, France          Master in mechanics 1991

 University of Bucharest Bucharest, Romania   Bachelor & Master in mathematics-mechanics 1988

 

Awards

 

 DGA Fellowship, France                                    Séjours étranger, 2015

 Académie des Sciences France                        Doisteau-Emile Blutet Prize 2006

 ASME Gas Turbine Institute USA                      Best paper award 2009

 Journal of Fatigue and Fracture of Engineering Materials and Structure Best paper award 2003

 Goverment Fellowship France                            Master and PhD studies 1990-1994

 

Board and management activities

 

 CNRS Paris, France                                           Chargé de mission, INSIS since 2011

 French National Commitee for Mechanics France        national organisation for IUTAM activities

 treasurer since 2009

 

 Comité National,CNRS Paris, France Solid Mechanics (Section 09)

 Member 2002 - 2004

 

 Laboratoire de Mécanique des Solides Palaiseau, France

 CNRS & Ecole Polytechnique

 

 Member of the management commitee since 2010

 

Publications 

     Google Scholar

 

Journal articles93 documents

  • Eva Héripré, Marwen Mehrez, Andrei Constantinescu. FIB manufactured microstructures with low Coefficients of Thermal Expansion. Mechanics Research Communications, Elsevier, 2021, ⟨10.1016/j.mechrescom.2021.103667⟩. ⟨hal-03128107⟩
  • Filippo Agnelli, Pierre Margerit, Paolo Celli, Chiara Daraio, Andrei Constantinescu. Systematic two-scale image analysis of extreme deformations in soft architectured sheets. International Journal of Mechanical Sciences, Elsevier, 2021, 194, pp.106205. ⟨10.1016/j.ijmecsci.2020.106205⟩. ⟨hal-03025307⟩
  • Filippo Agnelli, Michele Tricarico, Andrei Constantinescu. Shape-shifting panel from 3D printed undulated ribbon lattice. Extreme Mechanics Letters, Elsevier, 2021, 42, pp.101089. ⟨10.1016/j.eml.2020.101089⟩. ⟨hal-03025359⟩
  • Yanis Balit, Louis-Romain Joly, Fabien Szmytka, Sylvain Durbecq, Eric Charkaluk, et al.. Self-heating behavior during cyclic loadings of 316L stainless steel specimens manufactured or repaired by Directed Energy Deposition. Materials Science and Engineering: A, Elsevier, 2020, 786, pp.139476. ⟨10.1016/j.msea.2020.139476⟩. ⟨hal-02563296⟩
  • T. Rehbein, A. Lion, M. Johlitz, Andrei Constantinescu. Experimental investigation and modelling of the curing behaviour of photopolymers. Polymer Testing, Elsevier, 2020, 83, pp.106356. ⟨10.1016/j.polymertesting.2020.106356⟩. ⟨hal-02468304⟩
  • Ustim Khristenko, Andrei Constantinescu, Patrick Le Tallec, J. Tinsley Oden, Barbara Wohlmuth. A Statistical Framework for Generating Microstructures of Two-Phase Random Materials: Application to Fatigue Analysis. Multiscale Modeling and Simulation: A SIAM Interdisciplinary Journal, Society for Industrial and Applied Mathematics, 2020, 18 (1), pp.21-43. ⟨10.1137/19M1259286⟩. ⟨hal-02447357⟩
  • Yanis Balit, Camille Guévenoux, Alexandre Tanguy, Manas Upadhyay, Eric Charkaluk, et al.. High resolution digital image correlation for microstructural strain analysis of a stainless steel repaired by Directed Energy Deposition. Materials Letters, Elsevier, In press. ⟨hal-02503766⟩
  • Yanis Balit, Eric Charkaluk, Andrei Constantinescu. Digital image correlation for microstructural analysis of deformation pattern in additively manufactured 316L thin walls. Additive Manufacturing, Elsevier, 2020, 31, pp.100862. ⟨10.1016/j.addma.2019.100862⟩. ⟨hal-02409832⟩
  • Pierre Margerit, Daniel Weisz-Patrault, Krishnaswamy Ravi-Chandar, Andrei Constantinescu. Tensile and ductile fracture properties of as-printed 316L stainless steel thin walls obtained by directed energy deposition. Additive Manufacturing, Elsevier, In press. ⟨hal-03042512⟩
  • Fabien Szmytka, Eric Charkaluk, Andrei Constantinescu, Pierre Osmond. Probabilistic Low Cycle Fatigue criterion for nodular cast-irons. International Journal of Fatigue, Elsevier, 2020, 139, pp.105701. ⟨10.1016/j.ijfatigue.2020.105701⟩. ⟨hal-03080253⟩
  • Camille Guévenoux, Simon Hallais, Yanis Balit, Alexandre Charles, Eric Charkaluk, et al.. Plastic strain localization induced by microstructural gradient in laser cladding repaired structures. Theoretical and Applied Fracture Mechanics, Elsevier, 2020, 107, pp.102520. ⟨10.1016/j.tafmec.2020.102520⟩. ⟨hal-02509924⟩
  • Camille Guévenoux, Simon Hallais, Alexandre Charles, Eric Charkaluk, Andrei Constantinescu. Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components. Optics and Laser Technology, Elsevier, 2020, 128, pp.106218. ⟨10.1016/j.optlastec.2020.106218⟩. ⟨hal-02517596⟩
  • Filippo Agnelli, Andrei Constantinescu, Grigor Nika. Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson’s ratio. Continuum Mechanics and Thermodynamics, Springer Verlag, 2019, ⟨10.1007/s00161-019-00851-6⟩. ⟨hal-02410356⟩
  • Imanol Martinez Perez, Andrei Constantinescu, Philippe Bastid, Yan-Hui Zhang, Vengatesan Venugopal. Computational fatigue assessment of mooring chains under tension loading. Engineering Failure Analysis, Elsevier, 2019, 106, ⟨10.1016/j.engfailanal.2019.06.073⟩. ⟨hal-02411493⟩
  • Michele Tricarico, Antonio Papangelo, Andrei Constantinescu, Michele Ciavarella. ON ADHESIVE THEORIES IN MULTILAYERED INTERFACES, WITH PARTICULAR REGARD TO "SURFACE FORCE APPARATUS" GEOMETRY. Facta Universitatis, Series: Mechanical Engineering, 2019, 17 (1), pp.95. ⟨10.22190/FUME190118011T⟩. ⟨hal-02411497⟩
  • Grigor Nika, Andrei Constantinescu. Design of multi-layer materials using inverse homogenization and a level set method. Computer Methods in Applied Mechanics and Engineering, Elsevier, 2019, 346, pp.388-409. ⟨10.1016/j.cma.2018.11.029⟩. ⟨hal-02411495⟩
  • Anthony Janin, Andrei Constantinescu, Daniel Weisz-Patrault, Robert Nevière, Matthieu Stackler, et al.. Identification of the material behavior of adhesive joints under dynamic multiaxial loadings. International Journal of Impact Engineering, Elsevier, 2019, ⟨10.1016/j.ijimpeng.2019.103355⟩. ⟨hal-02372694⟩
  • Alexandre Jouan, Andrei Constantinescu. A critical comparison of shear tests for adhesive joints. International Journal of Adhesion and Adhesives, Elsevier, 2018, 84, pp.63-79. ⟨10.1016/j.ijadhadh.2018.02.035⟩. ⟨hal-01765200⟩
  • Alexandre Jouan, Andrei Constantinescu. A modified dissipated energy fatigue criterion to consider the thermo-oxidative ageing of electrically conductive silicone adhesive joints. International Journal of Fatigue, Elsevier, 2018, 116, pp.68-79. ⟨10.1016/j.ijfatigue.2018.06.005⟩. ⟨hal-01819056⟩
  • A. Janin, Andrei Constantinescu, Daniel Weisz-Patrault, R. Neviere, M. Stackler, et al.. A new multiaxial specimen for determining dynamic properties of adhesive joints. Experimental Mechanics, Society for Experimental Mechanics, 2018, ⟨10.1007/s11340-018-0402-7⟩. ⟨hal-01823192⟩
  • Sebastian Krödel, Lichen Li, Andrei Constantinescu, Chiara Daraio. Stress relaxation in polymeric microlattice materials. Materials and Design, Elsevier, 2017, 130, pp.433-441. ⟨10.1016/j.matdes.2017.05.060⟩. ⟨hal-01632926⟩
  • Andrei Constantinescu, D. Jalocha, R. Nevière. Prestrain dependent viscoelastic model: Structural computation under dynamic loading. International Journal of Solids and Structures, Elsevier, 2017, 120, pp.1 - 6. ⟨10.1016/j.ijsolstr.2016.12.011⟩. ⟨hal-01632918⟩
  • Andrei Constantinescu, Anton Bauhofer, Sebastian Krödel, Jan Rys, Osama R. Bilal, et al.. Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets. Advanced Materials, Wiley-VCH Verlag, 2017, 29 (42), ⟨10.1002/adma.201703024⟩. ⟨hal-01632916⟩
  • Andrei Constantinescu, A. Janin, D. Weisz-Patrault, R. Nevière, M. Stackler, et al.. An Experimental Technique For The Characterization Of Adhesive Joints Under Dynamic Multiaxial Loadings. Procedia Engineering, Elsevier, 2017, 197, pp.52 - 59. ⟨10.1016/j.proeng.2017.08.081⟩. ⟨hal-01632922⟩
  • Loïc Loisel, Marc Châtelet, Guillaume Giudicelli, Mathias Lebihain, Yi Yang, et al.. Graphitization and amorphization of textured carbon using high-energy nanosecond laser pulses. Carbon, Elsevier, 2016, 105, pp.227-232. ⟨10.1016/j.carbon.2016.04.026⟩. ⟨hal-01765284⟩
  • Habibou Maitournam, Marcel Alquezar, Victor. Arrieta, Laila. Flandi, Patrick Wackers, et al.. Computational fretting-fatigue maps for different plasticity models. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2016, ⟨10.1111/ffe.12130⟩. ⟨hal-01282088⟩
  • Armel Mbiakop, Danas Kostas, Andrei Constantinescu. A homogenization based yield criterion for a porous Tresca material with ellipsoidal voids. International Journal of Fracture, Springer Verlag, 2016, ⟨10.1007/s10704-015-0071-9⟩. ⟨hal-01395637⟩
  • Ferdinando Auricchio, Andrei Constantinescu, Michele Conti, Giulia Scalet. Fatigue of Metallic Stents: From Clinical Evidence to Computational Analysis. Annals of Biomedical Engineering, Springer Verlag, 2015, pp.1-15. ⟨10.1007/s10439-015-1447-8⟩. ⟨hal-01219403⟩
  • Armel Mbiakop, Andrei Constantinescu, Kostas Danas. An analytical model for porous single crystals with ellipsoidal voids. Journal of the Mechanics and Physics of Solids, Elsevier, 2015, 84, pp.436-467. ⟨10.1016/j.jmps.2015.07.011⟩. ⟨hal-01219387⟩
  • Aurélie Azoug, Robert Nevière, Andrei Constantinescu. Molecular Origin of the Influence of the Temperature on the Loss Factor of a Solid Propellant. Propellants, Explosives, Pyrotechnics, 2015, 40 (4), ⟨10.1002/prep.201400060⟩. ⟨hal-01219725⟩
  • Aurélie Azoug, Andrei Constantinescu, Robert Nevière, Guy Jacob. Microstructure and deformation mechanisms of a solid propellant using 1H NMR spectroscopy. Fuel, Elsevier, 2015, 148 (May), pp.39-47. ⟨10.1016/j.fuel.2015.01.074⟩. ⟨hal-01219721⟩
  • Dimitri Jalocha, Andrei Constantinescu, Robert Nevière. Prestrained biaxial DMA investigation of viscoelastic nonlinearities in highly filled elastomers. Polymer Testing, Elsevier, 2015, 42, pp.37-44. ⟨10.1016/j.polymertesting.2015.01.005⟩. ⟨hal-01219730⟩
  • Ferdinando Auricchio, Andrei Constantinescu, Michele Conti, Giulia Scalet. A computational approach for the lifetime prediction of cardiovascular balloon-expandable stents. International Journal of Fatigue, Elsevier, 2015, 75, pp.69-79. ⟨10.1016/j.ijfatigue.2015.02.002⟩. ⟨hal-01219744⟩
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Gildas Guillemot, Fabien Szmytka. Influence of process-induced microstructure on hardness of two Al-Si alloys . Materials Science & Engineering, AStructural Materials: Properties, Microstructure and Processing, 2015, 646, pp.190-200. ⟨10.1016/j.msea.2015.08.051⟩. ⟨hal-01253000⟩
  • Dimitri Jalocha, Andrei Constantinescu, Robert Nevière. Prestrain-dependent viscosity of a highly filled elastomer: experiments and modeling. Mechanics of Time-Dependent Materials, Society for Experimental Mechanics, 2015, 19 (3), ⟨10.1007/s11043-015-9262-z⟩. ⟨hal-01219736⟩
  • Aurélie Azoug, Robert Nevière, Rachel-Marie Pradeilles-Duval, Andrei Constantinescu. Influence of fillers and bonding agents on the viscoelasticity of highly filled elastomers. Journal of Applied Polymer Science, Wiley, 2014, 131 (16), ⟨10.1002/app.40664⟩. ⟨hal-01219758⟩
  • Andrei Constantinescu, Olivian Simionescu, Alexandru Stanciu. Revisiting the identification of distributed elastic coefficients in anisotropic media. Annals of the University of Bucharest. Mathematical series, București : Editura Universității din București, 2014. ⟨hal-01282124⟩
  • Ferdinando Auricchio, Andrei Constantinescu, Giulia Scalet. Fatigue of 316L stainless steel notched. International Journal of Fatigue, Elsevier, 2014, 68, pp.231-247. ⟨10.1016/j.ijfatigue.2014.04.013⟩. ⟨hal-01219711⟩
  • Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Shadan Tabibian. Probability density functions: From porosities to fatigue lifetime. International Journal of Fatigue, Elsevier, 2014, 63, pp.127-136. ⟨10.1016/j.ijfatigue.2014.01.017⟩. ⟨hal-00961217⟩
  • Aurelie Azoug, Robert Nevière, Rachel-Marie Pradeilles-Duval, Andrei Constantinescu. Influence of crosslinking and plasticizing on the viscoelasticity of highly filled elastomers. Journal of Applied Polymer Science, Wiley, 2014, 131 (12), ⟨10.1002/app.40392⟩. ⟨hal-01219754⟩
  • Andrei Constantinescu, A.M. Korsunsky, Pison O., Abdelbacet Oueslati. Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating. International Journal of Solids and Structures, Elsevier, 2013. ⟨hal-01812764⟩
  • Andrei Constantinescu, A. M Korsunsky, Olivier Pison, Abdelbacet Oueslati. Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating. International Journal of Solids and Structures, Elsevier, 2013. ⟨hal-01812744⟩
  • Aurélie Azoug, Anders Thorin, Robert Nevière, Rachel-Marie Pradeilles-Duval, Andrei Constantinescu. Influence of orthogonal prestrain on the viscoelastic behaviour of highly-filled elastomers. Polymer Testing, Elsevier, 2013, 32 (2), pp.375-384. ⟨10.1016/j.polymertesting.2012.12.005⟩. ⟨hal-01402496⟩
  • Andrei Constantinescu, A.M. Korsunsky, O. Pison, Abdelbacet Oueslati. Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating. International Journal of Solids and Structures, Elsevier, 2013, 50 (18), pp.2798-2807. ⟨10.1016/j.ijsolstr.2013.04.017⟩. ⟨hal-00832623⟩
  • Véronique Doquet, Neji Ben Ali, Andrei Constantinescu, Emmanuelle Chabert. Fissuration du verre de confinement des déchets radioactifs. Flash X, Lettre Scientifique de l'Ecole Polytechnique ISSN 1775-0385, 2013, 15 (Energies), pp.39-42. ⟨hal-00871002⟩
  • Marcel Alquezar-Getan, Victor Arrieta, Andrei Constantinescu, Leïla Flandi, Habibou Maitournam, et al.. Computational fretting fatigue maps for different plasticity models. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2013, 37 (4), ⟨10.1111/ffe.12130⟩. ⟨hal-01217299⟩
  • Andrei Constantinescu, Alexander Korsunsky, Olivier Pison, Abdelbacet Oueslati. Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating. International Journal of Solids and Structures, Elsevier, 2013, 50, pp.2798-2807. ⟨10.1016/j.ijsolstr.2013.04.017⟩. ⟨hal-00833490⟩
  • Huy Duong Bui, Andrei Constantinescu, Hubert Maigre. The inverse problem of seismic fault determination using part time measurements. Journal of Mechanics of Materials and Structures, Mathematical Sciences Publishers, 2012, 7 (10), ⟨10.2140/jomms.2012.7.997⟩. ⟨hal-00913588⟩
  • Stefano Bosia, Andrei Constantinescu. Fast time-scale average for a mesoscopic high cycle fatigue criterion. International Journal of Fatigue, Elsevier, 2012, 45, pp.39-47. ⟨10.1016/j.ijfatigue.2012.01.012⟩. ⟨hal-00761153⟩
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Alexis Oudin. TMF criteria for Lost Foam Casting aluminum alloys. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2012, ⟨10.1111/ffe.12006q⟩. ⟨hal-00757317⟩
  • Joris Prou, Kikuo Kishimoto, Kazuaki Inaba, Andrei Constantinescu. Inverse Analysis of Multiple Indentation Unloading Curves for Thin Film Young's Modulus Evaluation. Theoretical and Applied Mechanics, 2012, 60, pp.249-261. ⟨10.11345/nctam.60.249⟩. ⟨hal-00723719⟩
  • Cédric Bellis, Andrei Constantinescu, Thomas Coquet, Thomas Jaravel, Armin Lechleiter. A non-iterative sampling approach using noise subspace projection for EIT. Inverse Problems, IOP Publishing, 2012, ⟨10.1088/0266-5611/28/7/075015⟩. ⟨hal-00757299⟩
  • Aurélie Azoug, Andrei Constantinescu, Rachel Marie Praidelles-Duval, M. F. Vallat, R. Nevière, et al.. Effect of the sol fraction and hydrostatic deformation on the viscoelastic behavior of prestrained highly filled elastomers. Journal of Applied Polymer Science, Wiley, 2012, 127 (3), pp.1772-1780. ⟨10.1002/app.37800⟩. ⟨hal-00761141⟩
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Alexis Oudin. TMF-LCF life assessment of a Lost Foam Casting A319 aluminum alloy. International Journal of Fatigue, Elsevier, 2012, ⟨10.1016/j.ijfatigue.2012.01.012⟩. ⟨hal-00757313⟩
  • Anders Thorin, Aurélie Azoug, Andrei Constantinescu. Influence of prestrain on mechanical properties of highly-filled elastomers: Measurements and modeling. Polymer Testing, Elsevier, 2012, 31, pp.978-986. ⟨10.1016/j.polymertesting.2012.07.014⟩. ⟨hal-00723704v2⟩
  • Véronique Doquet, Neji Ben Ali, Andrei Constantinescu, Xavier Boutillon. Fracture of a borosilicate glass under triaxial tension. Mechanics of Materials, Elsevier, 2012, 57, pp.15-29. ⟨10.1016/j.mechmat.2012.10.008⟩. ⟨hal-00755477⟩
  • Mohamed Ferjani, Daniel Averbuch, Andrei Constantinescu. A computational approach for the fatigue design of threaded connections. International Journal of Fatigue, Elsevier, 2011, 33, pp. 610-623. ⟨10.1016/j.ijfatigue.2010.11.006⟩. ⟨hal-00544296⟩
  • Mohamed Ferjani, Daniel Averbuch, Andrei Constantinescu. Semianalytical solution for the stress distribution in notched tubes. International Journal of Fatigue, Elsevier, 2011, 33, pp. 557-567. ⟨10.1016/j.ijfatigue.2010.10.009⟩. ⟨hal-00544303⟩
  • Joris Prou, Kikuo Kishimoto, Andrei Constantinescu. Identification of Young's Modulus from Indentation Testing and Inverse Analysis. Journal of Solid Mechanics and Materials Engineering, 2010, 4 (6), pp.781--795. ⟨hal-00723702⟩
  • Hui Duong Bui, Stéphanie Chaillat, Andrei Constantinescu, Eva Grasso. Identification of a planar crack in Zener type viscoelasticity. Annals of Solid and Structural Mechanics, Springer Berlin Heidelberg, 2010, 1 (1), pp.3-8. ⟨10.1007/s12356-009-0003-3⟩. ⟨hal-00540730⟩
  • Martine Dubé, Véronique Doquet, Andrei Constantinescu, Daniel George, Yves Remond, et al.. Modeling of thermal shock-induced damage in a borosilicate glass. Mechanics of Materials, Elsevier, 2010, 42 (9), pp.863-872. ⟨10.1016/j.mechmat.2010.07.002⟩. ⟨hal-00512115⟩
  • Patrick Wackers, Victor Arrieta, Marcel Alquezar-Getan, Andrei Constantinescu, Habibou Maitournam. A Modeling Approach to Predict Fretting Fatigue on Highly Loaded Blade Roots. Journal of Engineering for Gas Turbines and Power, American Society of Mechanical Engineers, 2010, 132 (8), p. : 082101-1 082101-9. ⟨10.1115/1.3205026⟩. ⟨hal-00525622⟩
  • Véronique Doquet, Quang-Hien Bui, Andrei Constantinescu. Plasticity and asperity-induced fatigue crack closure under mixed-mode loading. International Journal of Fatigue, Elsevier, 2010, 32 (10), pp.1612-1619. ⟨10.1016/j.ijfatigue.2010.02.011⟩. ⟨hal-00497694⟩
  • A. Fissolo, S. Amiable, O. Ancelet, F. Mermaz, J.M. Stelmaszyk, et al.. Crack initiation under thermal fatigue: An overview of CEA experience. Part I: Thermal fatigue appears to be more damaging than uniaxial isothermal fatigue. International Journal of Fatigue, Elsevier, 2009, 31 (3), pp.587-600. ⟨10.1016/j.ijfatigue.2008.03.038⟩. ⟨hal-00438553⟩
  • Alexander Korsunsky, Andrei Constantinescu. The influence of indenter bluntness on the apparent contact stiffness of thin coatings. Thin Solid Films, Elsevier, 2009, 517 (17), pp.4835-4844. ⟨10.1016/j.tsf.2009.03.018⟩. ⟨hal-00438552⟩
  • A. Fissolo, C. Gourdin, O. Ancelet, S. Amiable, A. Demassieux, et al.. Crack initiation under thermal fatigue: An overview of CEA experience: Part II (of II): Application of various criteria to biaxial thermal fatigue tests and a first proposal to improve the estimation of the thermal fatigue damage. International Journal of Fatigue, Elsevier, 2009, 31 (7), pp.1196-1210. ⟨10.1016/j.ijfatigue.2008.11.018⟩. ⟨hal-00544273⟩
  • Eric Charkaluk, Andrei Constantinescu. Dissipative aspects in high cycle fatigue. Mechanics of Materials, Elsevier, 2009, 41 (5), pp.483-494. ⟨10.1016/j.mechmat.2009.01.018⟩. ⟨hal-00376738⟩
  • Andrei Constantinescu, Abdelbacet Oueslati. On the reconstruction of residual stresses after matter removal in rods. Comptes rendus de l’Académie des sciences. Série IIb, Mécanique, Elsevier, 2008, 336, pp.66-79. ⟨10.1016/j.crme.2007.10.016⟩. ⟨hal-00346668⟩
  • Andrei Constantinescu, Abdelbacet Oueslati. On the reconstruction of residual stresses after matter removal in rods. Comptes Rendus Mécanique, Elsevier Masson, 2008, 336 (1-2), pp.69-78. ⟨10.1016/j.crme.2007.10.016⟩. ⟨hal-00367368⟩
  • Graciela Bertolino, Andrei Constantinescu, Mohamed Ferjani, Philippe Treiber. A multiscale approach of fatigue and shakedown for notched structures. Theoretical and Applied Fracture Mechanics, Elsevier, 2007, 48 (2), pp.140-151. ⟨10.1016/j.tafmec.2007.05.002⟩. ⟨hal-00167744⟩
  • Sébastien Amiable, Sébastien Chapuliot, Andreï Constantinescu, Antoine Fissolo. A computational lifetime prediction of a thermal shock experiment. Part II: discussion on difference fatigue criteria. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2006, 29, pp.219-228. ⟨10.1111/j.1460-2695.2006.0983.x⟩. ⟨hal-00111461⟩
  • Sébastien Amiable, Stéphane Chapuliot, Andreï Constantinescu, Antoine Fissolo. A computational lifetime prediction of a thermal shock experiment. Part I: thermomechanical modelling and lifetime prediction. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2006, 29, pp.175-182. ⟨10.1111/j.1460-2695.2006.0976.x⟩. ⟨hal-00111460⟩
  • Sébastien Amiable, Stéphane Chapuliot, Andreï Constantinescu, Antoine Fissolo. A comparison of lifetime prediction methods for a thermal fatigue experiment. International Journal of Fatigue, Elsevier, 2006, 28, pp.692-706. ⟨10.1016/j.ijfatigue.2005.09.002⟩. ⟨hal-00111459⟩
  • Alexander Korsunsky, Andreï Constantinescu. Work of indentation approach to the analysis of hardness and modulus of thin coatings. Materials Science and Engineering: A, Elsevier, 2006, 423, pp.28-35. ⟨10.1016/j.msea.2005.09.126⟩. ⟨hal-00111507⟩
  • Eric Charkaluk, Andrei Constantinescu. Estimation of the mesoscopic thermoplastic dissipation in High-Cycle Fatigue. Comptes Rendus Mécanique, Elsevier Masson, 2006, 334, pp.373-379. ⟨10.1016/j.crme.2006.03.014⟩. ⟨hal-00082152⟩
  • Brice Lecampion, Andrei Constantinescu, Laurent Malinski. Identification of poroelastic constants of tight rocks from laboratory tests. International Journal of Geomechanics, American Society of Civil Engineers, 2006, 6, pp.201-208. ⟨10.1061/(ASCE)1532-3641(2006)6:3(201)⟩. ⟨hal-00111451⟩
  • Hui Duong Bui, Andrei Constantinescu, H. Maigre. An exact inversion formula for determining a planar fault from boundary measurements. Journal of Inverse and Ill-posed Problems, De Gruyter, 2005, 13 (6), pp.553-565. ⟨10.1515/156939405775199514⟩. ⟨hal-00167753⟩
  • Huy Duong Bui, Andrei Constantinescu, Hubert Maigre. Numerical identification of linear cracks in 2D elastodynamics using the instantaneous reciprocity gap. Inverse Problems, IOP Publishing, 2004, 20, pp.993-1001. ⟨10.1088/0266-5611/20/4/001⟩. ⟨hal-00111414⟩
  • Andrei Constantinescu, Eric Charkaluk, G. Lederer, L. Verger. A computational approach to thermomechanical fatigue. International Journal of Fatigue, Elsevier, 2004, 26 (8), pp.805-818. ⟨hal-00138135⟩
  • Eric Charkaluk, Andrei Constantinescu. Dissipation and fatigue damage - A unified method to treat fatigue damage. MP Materialprüfung, 2004, 46, pp.524-530. ⟨hal-00104249⟩
  • Andrei Constantinescu, Eric Charkaluk, Guy Lederer, Laetitia Verger. A computational approach to thermomechanical fatigue. International Journal of Fatigue, Elsevier, 2004, 26, pp.805-818. ⟨10.1016/j.ijfatigue.2004.01.006⟩. ⟨hal-00022603⟩
  • Eric Charkaluk, Andrei Constantinescu. Dissipation and fatigue damage. MP Materialprüfung, 2004, 46, pp.524-530. ⟨hal-00022610⟩
  • Eric Charkaluk, Andrei Constantinescu. Dissipation and fatigue damage. Material Testing, 2004, 46, pp.524-530. ⟨hal-00012206⟩
  • Florian Cano, Andrei Constantinescu, Habibou Maitournam. Critère de fatigue polycyclique pour des métaux anisotropes: application au monocristaux. Comptes Rendus Mécanique, Elsevier Masson, 2004, 332 (2), pp.115-121. ⟨10.1016/j.crme.2003.11.005⟩. ⟨hal-00111401⟩
  • Matteo Facchinetti, Xavier Boutillon, Andrei Constantinescu. Numerical and experimental modal analysis of the reed and pipe of a clarinet. Journal of the Acoustical Society of America, Acoustical Society of America, 2003, 113 (5), pp.2874-2883. ⟨10.1121/1.1560212⟩. ⟨hal-00111390⟩
  • Sergio Basso Ricci, Philippe Cluzel, Andrei Constantinescu, Thomas Similowski. Mechanical model of the inspiratory pump. Journal of Biomechanics, Elsevier, 2002, 35, pp.139-145. ⟨10.1016/S0021-9290(01)00164-6⟩. ⟨hal-00111343⟩
  • Brice Lecampion, Andrei Constantinescu, Duc Nguyen Minh. Parameter Identification for lined tunnels in a viscoplastic medium. International Journal for Numerical and Analytical Methods in Geomechanics, Wiley, 2002, 26 (12), pp.1191-1211. ⟨10.1002/nag.241⟩. ⟨hal-00111357⟩
  • Eric Charkaluk, André Bignonnet, Andreï Constantinescu, Ky Dang Van. Fatigue design of structures under thermomechanical loadings. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2002, 25, pp.1199-1206. ⟨10.1046/j.1460-2695.2002.00612.x⟩. ⟨hal-00111365⟩
  • Eric Charkaluk, André Bignonnet, Andrei Constantinescu, K. Dang Van. Fatigue design of structures under thermomechanical loadings. Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2002, 25 (12), pp.1199-1206. ⟨10.1046/j.1460-2695.2002.00612.x⟩. ⟨hal-00140317⟩
  • Andreï Constantinescu, Nicolas Tardieu. On the identification of elastoviscoplastic constitutive laws from indentation tests. Inverse Problems in Engineering, Informa UK (Taylor & Francis), 2001, 9, pp.19-44. ⟨10.1080/174159701088027751⟩. ⟨hal-00111325⟩
  • Huy Duong Bui, Andreï Constantinescu. Spatial localization of the error of constitutive law for the identification of defects in elastic bodies. Archives of Mechanics, Polish Scientific Publishers Pwn, 2000, 52, pp.511-522. ⟨hal-00111307⟩
  • Eric Charkaluk, Andrei Constantinescu. An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron. Materials at High Temperatures, Taylor and Francis, 2000, 17 (3), pp.373-380. ⟨hal-00141689⟩
  • E. Charkaluk, Andreï Constantinescu. An energetic approach in thermomechanical fatigue for silicium molybden cast iron. Materials at High Temperatures, Taylor and Francis, 2000, 17 (3), pp.373-380. ⟨10.1179/mht.2000.17.3.001⟩. ⟨hal-00111305⟩

Books1 document

  • Andrei Constantinescu, A. M. Korsunsky. Elasticity with Mathematica. Cambridge University Press, pp.255, 2007. ⟨hal-00346557⟩

Book sections3 documents

  • Stéphane Andrieux, Hui Duong Bui, Andrei Constantinescu. Reciprocity gap method. Michel Grédiac; François Hild; André Pineau. Full‐Field Measurements and Identification in Solid Mechanics, Wiley-VCH, pp.368-378, 2012, 978-1-84821-294-7. ⟨10.1002/9781118578469.ch13⟩. ⟨hal-00762187⟩
  • Andrei Constantinescu, Huy Duong Bui, Stéphane Andrieux. Méthode de l'écart à la réciprocité. Francois Hild et Michel Grediac. Mesures de champs et identification en mécanique des solides, Lavoisier, pp.383-398, 2011. ⟨hal-00647821⟩
  • Huy Duong Bui, Andrei Constantinescu, Hubert Maigre. The Reciprocity Gap Functional for Identifying Defects and Cracks. Zenon Mróz; Georgios Stavroulakis. Parameter Identification of materials and structures, 469, Springer-Verlag, pp.17-54, 2005, CISM International Centre for Mechanical Sciences, 9783211381342. ⟨10.1007/3-211-38134-1_2⟩. ⟨hal-00112504⟩

Theses1 document

  • Andrei Constantinescu. Sur l'identification des modules elastiques. Mathématiques [math]. Ecole Polytechnique X, 1994. Français. ⟨tel-00346591⟩

Habilitation à diriger des recherches1 document

  • Andrei Constantinescu. Calcul des structures :problèmes d'identification et de fatigue. Mécanique [physics.med-ph]. Université Pierre et Marie Curie - Paris VI, 2005. ⟨tel-00346584⟩