Nombre de documents

60

Andrei CONSTANTINESCU


Professional Experience

 

 CNRS Ecole Polytechnique, Palaiseau, France

 Laboratoire de Mécanique des Solides

 

Directeur de Recherches 1 ère classe since 2015

Directeur de Recherches 2 ème classe 2005-2015

 

Chargé de Recherches 1995 - 2005

 

Visiting Positions

 

 ETH Zurich, Switzerland                                Visiting professor 2015–2016

 Tokyo Institut of Technology Tokyo, Japon   Visiting professor 2008

 PSA Péugeot-Citroen Vélizy, France             Industrial leave 2002

 Oxford University Oxford, United Kingdom     Visiting fellow, Royal Society 2002

 Cornell University Ithaca, NY, USA                Visiting scientist 1994

 

Education

 

 Université Pierre et Marie Curie Paris, France  Habilitation 2005

 Ecole Polytechnique Palaiseau, France          PhD in mechanics 1994

 Ecole Polytechnique Palaiseau, France          Master in mechanics 1991

 University of Bucharest Bucharest, Romania   Bachelor & Master in mathematics-mechanics 1988

 

Awards

 

 DGA Fellowship, France                                    Séjours étranger, 2015

 Académie des Sciences France                        Doisteau-Emile Blutet Prize 2006

 ASME Gas Turbine Institute USA                      Best paper award 2009

 Journal of Fatigue and Fracture of Engineering Materials and Structure Best paper award 2003

 Goverment Fellowship France                            Master and PhD studies 1990-1994

 

Board and management activities

 

 CNRS Paris, France                                           Chargé de mission, INSIS since 2011

 French National Commitee for Mechanics France        national organisation for IUTAM activities

 treasurer since 2009

 

 Comité National,CNRS Paris, France Solid Mechanics (Section 09)

 Member 2002 - 2004

 

 Laboratoire de Mécanique des Solides Palaiseau, France

 CNRS & Ecole Polytechnique

 

 Member of the management commitee since 2010

 

Publications 

     Google Scholar

 


Article dans une revue55 documents

  • Andrei Constantinescu, Anton Bauhofer, Sebastian Krödel, Jan Rys, Osama R. Bilal, et al.. Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets. Advanced Materials, 2017, 29 (42), 〈10.1002/adma.201703024〉. 〈hal-01632916〉
  • Andrei Constantinescu, Sebastian Krödel, Lichen Li, Chiara Daraio. Stress relaxation in polymeric microlattice materials. Materials & Design, 2017, 130, pp.433 - 441. 〈10.1016/j.matdes.2017.05.060〉. 〈hal-01632920〉
  • Andrei Constantinescu, Sebastian Krödel, Lichen Li, Chiara Daraio. Stress relaxation in polymeric microlattice materials. Materials & Design, 2017, 130, pp.433 - 441. 〈10.1016/j.matdes.2017.05.060〉. 〈hal-01632926〉
  • Andrei Constantinescu, D. Jalocha, R. Nevière. Prestrain dependent viscoelastic model: Structural computation under dynamic loading. International Journal of Solids and Structures, Elsevier, 2017, 120, pp.1 - 6. 〈10.1016/j.ijsolstr.2016.12.011〉. 〈hal-01632918〉
  • Andrei Constantinescu, A. Janin, D. Weisz-Patrault, R. Nevière, M. Stackler, et al.. An Experimental Technique For The Characterization Of Adhesive Joints Under Dynamic Multiaxial Loadings. Procedia Engineering, Elsevier, 2017, 197, pp.52 - 59. 〈10.1016/j.proeng.2017.08.081〉. 〈hal-01632922〉
  • Florent Dufour, Thibault Rattier, Andrei Constantinescu, Luciana Zischler, Aymeric Morlé, et al.. TRAIL receptor gene editing unveils TRAIL-R1 as a master player of apoptosis induced by TRAIL and ER stress. Oncotarget, Impact journals, 2016, 8 (6), pp.9974-9985. 〈10.18632/oncotarget.14285〉. 〈inserm-01423110〉
  • Armel Mbiakop, Danas Kostas, Andrei Constantinescu. A homogenization based yield criterion for a porous Tresca material with ellipsoidal voids. International Journal of Fracture, Springer Verlag, 2016, 〈10.1007/s10704-015-0071-9〉. 〈hal-01395637〉
  • Habibou Maitournam, Marcel Alquezar, Victor. Arrieta, Laila. Flandi, Patrick Wackers, et al.. Computational fretting-fatigue maps for different plasticity models. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 2016. 〈hal-01282088〉
  • Ferdinando Auricchio, Scalet Giulia, Michele Conti, Andrei Constantinescu. Fatigue of Metallic Stents: From Clinical Evidence to Computational Analysis. Annals of Biomedical Engineering, Springer Verlag, 2015, pp.1-15. 〈http://link.springer.com/article/10.1007/s10439-015-1447-8〉. 〈10.1007/s10439-015-1447-8〉. 〈hal-01219403〉
  • Mbiakop Armel, Andrei Constantinescu, Kostas Danas. An analytical model for porous single crystals with ellipsoidal voids. Journal of the Mechanics and Physics of Solids, Elsevier, 2015, 84, pp.436-467. 〈http://www.journals.elsevier.com/journal-of-the-mechanics-and-physics-of-solids/〉. 〈10.1016/j.jmps.2015.07.011〉. 〈hal-01219387〉
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Gildas Guillemot, Fabien Szmytka. Influence of process-induced microstructure on hardness of two Al-Si alloys . Materials Science & Engineering, AStructural Materials: Properties, Microstructure and Processing, 2015, 646, pp.190-200. 〈10.1016/j.msea.2015.08.051 〉. 〈hal-01253000〉
  • Aurélie Azoug, Robert Nevière, Andrei Constantinescu. Molecular Origin of the Influence of the Temperature on the Loss Factor of a Solid Propellant. Propellants, Explosives, Pyrotechnics, 2015, 40 (4), 〈http://onlinelibrary.wiley.com/doi/10.1002/prep.201400060/full〉. 〈10.1002/prep.201400060〉. 〈hal-01219725〉
  • Aurélie Azoug, Andrei Constantinescu, Robert Nevière, Guy Jacob. Microstructure and deformation mechanisms of a solid propellant using 1H NMR spectroscopy. Fuel, Elsevier, 2015, 148 (May), pp.39-47. 〈http://www.sciencedirect.com/science/article/pii/S0016236115000885〉. 〈10.1016/j.fuel.2015.01.074〉. 〈hal-01219721〉
  • Andrei Constantinescu, Olivian Simionescu, Alexandru Stanciu. Revisiting the identification of distributed elastic coefficients in anisotropic media. Annals of the University of Bucharest. Mathematical series, București : Editura Universității din București, 2014. 〈hal-01282124〉
  • Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Shadan Tabibian. Probability density functions: From porosities to fatigue lifetime. International Journal of Fatigue, Elsevier, 2014, 63, pp.127-136. 〈10.1016/j.ijfatigue.2014.01.017〉. 〈hal-00961217〉
  • Aurélie Azoug, Robert Nevière, Rachel-Marie Pradeilles-Duval, Andrei Constantinescu. Influence of fillers and bonding agents on the viscoelasticity of highly filled elastomers. Journal of Applied Polymer Science, Wiley, 2014, 131 (16), 〈http://onlinelibrary.wiley.com/store/10.1002/app.40664/asset/app40664.pdf?v=1&t=ig3fcee2&s=d13f462fd04748ab673bbe7b66d246c2925c0948〉. 〈10.1002/app.40664〉. 〈hal-01219758〉
  • Aurelie Azoug, Robert Nevière, Rachel-Marie Pradeilles-Duval, Andrei Constantinescu. Influence of crosslinking and plasticizing on the viscoelasticity of highly filled elastomers. Journal of Applied Polymer Science, Wiley, 2014, 131 (12), 〈http://onlinelibrary.wiley.com/doi/10.1002/app.40392/full〉. 〈10.1002/app.40392〉. 〈hal-01219754〉
  • Véronique Doquet, Neji Ben Ali, Andrei Constantinescu, Emmanuelle Chabert. Fissuration du verre de confinement des déchets radioactifs. Flash X, Lettre Scientifique de l'Ecole Polytechnique ISSN 1775-0385, 2013, 15 (Energies), pp.39-42. 〈hal-00871002〉
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Alexis Oudin. TMF-LCF life assessment of a Lost Foam Casting A319 aluminum alloy. International Journal of Fatigue, Elsevier, 2013, 53, pp.75-81. 〈10.1016/j.ijfatigue.2012.01.012〉. 〈hal-00825586〉
  • Andrei Constantinescu, A.M. Korsunsky, O. Pison, Abdelbacet Oueslati. Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating. International Journal of Solids and Structures, Elsevier, 2013, 50 (18), pp.2798-2807. 〈10.1016/j.ijsolstr.2013.04.017〉. 〈hal-00832623〉
  • Aurélie Azoug, Anders Thorin, Robert Nevière, Rachel-Marie Pradeilles-Duval, Andrei Constantinescu. Influence of orthogonal prestrain on the viscoelastic behaviour of highly-filled elastomers. Polymer Testing, Elsevier, 2013, 32 (2), pp.375-384. 〈10.1016/j.polymertesting.2012.12.005〉. 〈hal-01402496〉
  • Marcel Alquezar-Getan, Victor Arrieta, Andrei Constantinescu, Leïla Flandi, Habibou Maitournam, et al.. Computational fretting fatigue maps for different plasticity models. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 2013, 37 (4), 〈10.1111/ffe.12130〉. 〈hal-01217299〉
  • Joris Prou, Kikuo Kishimoto, Kazuaki Inaba, Andrei Constantinescu. Inverse Analysis of Multiple Indentation Unloading Curves for Thin Film Young's Modulus Evaluation. Theoretical and Applied Mechanics, 2012, 60, pp.249--261. 〈hal-00723719〉
  • H. D. Bui, Andrei Constantinescu, Hubert Maigre. The inverse problem of seismic fault determination using part time measurements. Journal of Mechanics of Materials and Structures, Mathematical Sciences Publishers, 2012, 7 (10), pp.dx.doi.org/10.2140/jomms.2012.7.997. 〈hal-00913588〉
  • Cédric Bellis, Andrei Constantinescu, Thomas Coquet, Thomas Jaravel, Armin Lechleiter. A non-iterative sampling approach using noise subspace projection for EIT. Inverse Problems, IOP Publishing, 2012, pp.doi:10.1088/0266-5611/28/7/075015. 〈hal-00757299〉
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Alexis Oudin. TMF-LCF life assessment of a Lost Foam Casting A319 aluminum alloy. International Journal of Fatigue, Elsevier, 2012, pp.doi:10.1016/j.ijfatigue.2012.01.012. 〈hal-00757313〉
  • Stefano Bosia, Andrei Constantinescu. Fast time-scale average for a mesoscopic high cycle fatigue criterion. International Journal of Fatigue, Elsevier, 2012, Volume 45, December 2012, Pages 39-47, pp.doi:10.1016/j.ijfatigue.2012.01.012. 〈hal-00761153〉
  • Aurélie Azoug, Andrei Constantinescu, Rachel Marie Praidelles-Duval, M. F. Vallat, R. Nevière, et al.. Effect of the sol fraction and hydrostatic deformation on the viscoelastic behavior of prestrained highly filled elastomers. Journal of Applied Polymer Science, Wiley, 2012, Volume 127, Issue 3, p. 1772-1780, 5, DOI: 10.1002/app.37800. 〈hal-00761141〉
  • Anders Thorin, Aurélie Azoug, Andrei Constantinescu. Influence of prestrain on mechanical properties of highly-filled elastomers: Measurements and modeling. Polymer Testing, Elsevier, 2012, 31, pp.978-986. 〈10.1016/j.polymertesting.2012.07.014〉. 〈hal-00723704v2〉
  • Shadan Tabibian, Eric Charkaluk, Andrei Constantinescu, Fabien Szmytka, Alexis Oudin. TMF criteria for Lost Foam Casting aluminum alloys. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 2012, pp.doi: 10.1111/ffe.12006. 〈hal-00757317〉
  • Véronique Doquet, Neji Ben Ali, Andrei Constantinescu, Xavier Boutillon. Fracture of a borosilicate glass under triaxial tension. Mechanics of Materials, Elsevier, 2012, 57, pp.15-29. 〈10.1016/j.mechmat.2012.10.008〉. 〈hal-00755477〉
  • Mohamed Ferjani, Daniel Averbuch, Andrei Constantinescu. A computational approach for the fatigue design of threaded connections. International Journal of Fatigue, Elsevier, 2011, 33, pp. 610-623. 〈10.1016/j.ijfatigue.2010.11.006〉. 〈hal-00544296〉
  • Mohamed Ferjani, Daniel Averbuch, Andrei Constantinescu. Semianalytical solution for the stress distribution in notched tubes. International Journal of Fatigue, Elsevier, 2011, 33, pp. 557-567. 〈10.1016/j.ijfatigue.2010.10.009〉. 〈hal-00544303〉
  • Hui Duong Bui, Stéphanie Chaillat, Andrei Constantinescu, Eva Grasso. Identification of a planar crack in Zener type viscoelasticity. Annals of Solid and Structural Mechanics, Springer Berlin Heidelberg, 2010, 1 (1), pp.3-8. 〈10.1007/s12356-009-0003-3〉. 〈hal-00540730〉
  • Joris Prou, Kikuo Kishimoto, Andrei Constantinescu. Identification of Young's Modulus from Indentation Testing and Inverse Analysis. Journal of Solid Mechanics and Materials Engineering, 2010, 4 (6), pp.781--795. 〈hal-00723702〉
  • Véronique Doquet, Quang-Hien Bui, Andrei Constantinescu. Plasticity and asperity-induced fatigue crack closure under mixed-mode loading. International Journal of Fatigue, Elsevier, 2010, 32 (10), pp.1612-1619. 〈10.1016/j.ijfatigue.2010.02.011〉. 〈hal-00497694〉
  • Patrick Wackers, Victor Arrieta, Marcel Alquezar-Getan, Andrei Constantinescu, Habibou Maitournam. A Modeling Approach to Predict Fretting Fatigue on Highly Loaded Blade Roots. Journal of Engineering for Gas Turbines and Power, American Society of Mechanical Engineers, 2010, 132 (8), p. : 082101-1 082101-9. 〈10.1115/1.3205026〉. 〈hal-00525622〉
  • Martine Dubé, Véronique Doquet, Andrei Constantinescu, Daniel George, Yves Remond, et al.. Modeling of thermal shock-induced damage in a borosilicate glass. Mechanics of Materials, Elsevier, 2010, 42 (9), pp.863-872. 〈10.1016/j.mechmat.2010.07.002〉. 〈hal-00512115〉
  • Andrei Constantinescu, Alexander Korsunsky. The influence of indenter bluntness on the apparent contact stiffness of thin coatings. Thin Solid Films, Elsevier, 2009, 517 (17), pp.4835-4844. 〈10.1016/j.tsf.2009.03.018〉. 〈hal-00438552〉
  • A. Fissolo, C. Gourdin, O. Ancelet, S. Amiable, S. Chapuliot, et al.. Crack initiation under thermal fatigue: An overview of CEA experience: Part II (of II): Application of various criteria to biaxial thermal fatigue tests and a first proposal to improve the estimation of the thermal fatigue damage. International Journal of Fatigue, Elsevier, 2009, 31 (7), pp.1196-1210. 〈10.1016/j.ijfatigue.2008.11.018〉. 〈hal-00544273〉
  • Andrei Constantinescu, A. Fissolo, S. Amiable, O. Ancelet, F. Mermaz, et al.. Crack initiation under thermal fatigue: An overview of CEA experience. Part I: Thermal fatigue appears to be more damaging than uniaxial isothermal fatigue. International Journal of Fatigue, Elsevier, 2009, 31 (3), pp.587-600. 〈10.1016/j.ijfatigue.2008.03.038〉. 〈hal-00438553〉
  • Eric Charkaluk, Andrei Constantinescu. Dissipative aspects in high cycle fatigue. Mechanics of Materials, Elsevier, 2009, 41 (5), pp.483-494. 〈10.1016/j.mechmat.2009.01.018〉. 〈hal-00376738〉
  • Andrei Constantinescu, Abdelbacet Oueslati. On the reconstruction of residual stresses after matter removal in rods. Comptes rendus de l’Académie des sciences. Série IIb, Mécanique, Elsevier, 2008, 336, pp.66-79. 〈hal-00346668〉
  • Andrei Constantinescu, Abdelbacet Oueslati. On the reconstruction of residual stresses after matter removal in rods. Comptes Rendus Mécanique, Elsevier Masson, 2008, 336 (1-2), pp.69-78. 〈10.1016/j.crme.2007.10.016〉. 〈hal-00367368〉
  • Andrei Constantinescu, Graciela Bertolino, Mohamed Ferjani, Philippe Treiber. A multiscale approach of fatigue and shakedown for notched structures. Theoretical and Applied Fracture Mechanics, Elsevier, 2007, 48 (2), pp.140-151. 〈10.1016/j.tafmec.2007.05.002〉. 〈hal-00167744〉
  • Eric Charkaluk, Andrei Constantinescu. Estimation of the mesoscopic thermoplastic dissipation in High-Cycle Fatigue. Comptes Rendus Mécanique, Elsevier Masson, 2006, 334, pp.373-379. 〈10.1016/j.crme.2006.03.014〉. 〈hal-00082152〉
  • Hui Duong Bui, Andrei Constantinescu, H. Maigre. An exact inversion formula for determining a planar fault from boundary measurements. Inverse and Ill Posed Problems, 2005, 13 (6), pp.553-565. 〈hal-00167753〉
  • Eric Charkaluk, Andrei Constantinescu. Dissipation and fatigue damage - A unified method to treat fatigue damage. MP Materialprüfung, 2004, 46, pp.524-530. 〈hal-00104249〉
  • Andrei Constantinescu, Eric Charkaluk, Guy Lederer, Laetitia Verger. A computational approach to thermomechanical fatigue. International Journal of Fatigue, Elsevier, 2004, 26, pp.805-818. 〈10.1016/j.ijfatigue.2004.01.006〉. 〈hal-00022603〉
  • Andrei Constantinescu, Eric Charkaluk, G. Lederer, L. Verger. A computational approach to thermomechanical fatigue. International Journal of Fatigue, Elsevier, 2004, 26 (8), pp.805-818. 〈hal-00138135〉
  • Eric Charkaluk, Andrei Constantinescu. Dissipation and fatigue damage. MP Materialprüfung, 2004, 46, pp.524-530. 〈hal-00022610〉
  • Eric Charkaluk, Andrei Constantinescu. Dissipation and fatigue damage. Material Testing, 2004, 46, pp.524-530. 〈hal-00012206〉
  • Matteo Facchinetti, Xavier Boutillon, Andrei Constantinescu. Numerical and experimental modal analysis of the reed and pipe of a clarinet. Journal of the Acoustical Society of America, Acoustical Society of America, 2003, 113 (5), pp.2874-2883. 〈10.1121/1.1560212〉. 〈hal-00111390〉
  • Eric Charkaluk, André Bignonnet, Andrei Constantinescu, K. Dang Van. Fatigue design of structures under thermomechanical loadings. Fatigue and Fracture of Engineering Materials and Structures, Wiley-Blackwell, 2002, 25 (12), pp.1199-1206. 〈10.1046/j.1460-2695.2002.00612.x〉. 〈hal-00140317〉
  • Eric Charkaluk, Andrei Constantinescu. An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron. Materials at High Temperatures, Taylor and Francis, 2000, 17 (3), pp.373-380. 〈hal-00141689〉

Ouvrage (y compris édition critique et traduction)1 document

  • Andrei Constantinescu, A. M. Korsunsky. Elasticity with Mathematica. Cambridge University Press, pp.255, 2007. 〈hal-00346557〉

Chapitre d'ouvrage2 documents

  • Stéphane Andrieux, Hui Duong Bui, Andrei Constantinescu. Reciprocity gap method. Field Measurement in Solid Mechanics, Wiley-VCH, pp.368-378, 2012, ISBN 978-1-84821-294-7 - John Wiley & Sons. 〈hal-00762187〉
  • Andrei Constantinescu, H.D. Bui, Stéphane Andrieux. Méthode de l'écart à la réciprocité. Francois Hild et Michel Grediac. Mesures de champs et identification en mécanique des solides, Lavoisier, pp.383-398, 2011. 〈hal-00647821〉

Thèse1 document

  • Andrei Constantinescu. Sur l'identification des modules elastiques. Mathématiques [math]. Ecole Polytechnique X, 1994. Français. 〈tel-00346591〉

HDR1 document

  • Andrei Constantinescu. Calcul des structures :problèmes d'identification et de fatigue. Mécanique [physics.med-ph]. Université Pierre et Marie Curie - Paris VI, 2005. 〈tel-00346584〉